How to re-install Mail Services from scratch

I upgraded 10.4 to 10.5 and mail services did not fare well so I want to re-install mail services as if it was a new 10.5 install. By now I have web services, etc. running nicely so I don't want to start with a total fresh install if it can be helped.
I only have a few users and small maillist on this domain so I figured a start from scratch is really the easiest, if it can be done.
Basically smtp doesn't want to allow incoming and maillist won't start. Have tried too many things to remember so I figure it's back to square one and if a total re-install is needed, well, so be it but thought I'd check first re just a re-install of mail services.
TIA - Heinz

Here is the output, just in case
In addition to replacing the cf's, should I get rid of any database files?
TIA
sh-3.2# postconf -n
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter =
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay = heinz
mail_owner = _postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 31457280
mydestination = $myhostname,localhost.$mydomain,localhost,byted.com
mydomain = byted.com
mydomain_fallback = localhost
myhostname = mail.byted.com
mynetworks = 127.0.0.1/32,208.181.117.0/24,192.168.2.0/24,70.68.128.164,207.81.159.111,207.8 1.155.85,72.18.225.18
newaliases_path = /usr/bin/newaliases
ownerrequestspecial = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpsasl_authenable = yes
smtpsasl_passwordmaps = hash:/etc/postfix/sasl/passwd
smtpdclientrestrictions = permit_mynetworks zen.spamhouse.org rejectrblclient rejectrblclient permit
smtpdpw_server_securityoptions = login,plain,cram-md5
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpduse_pwserver = yes
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains =
virtual_transport = virtual

Similar Messages

  • How Can I install Web Service on Oracle 11g r1?

    How Can I install Web Service on Oracle 11g r1?

    Hi,
    Is necesary install XDB?
    Because i have executed;
    select * from dba_registry
    where COMP_ID = 'XDB'
    Oracle XML Database
    Regards

  • How to call a web Service from Oracle Applications?

    Hi friends,
    I've posted this question on OA Framework forum , but may be it's more appropiated put it here. Sorry for do it again:
    It's about how to call a web service from a Form or a .sql (via Request) in Oracle Applications:
    Could you please explain here the detailed steps (with code example if it's possible) to invoke a webservice from Oracle Applications?.. how did yo do it...?
    I've read differents posts here and the 33097.1 metalink note (by the way, the first recommended link in this note is broken...), but there are lots of theorical concepts and no real examples to see how/from where invoke the WS
    I'll have to call one webservice (I suppose the customer will give me the interface implementation)...but I've never did it with Applications so that's why I ask you for all the detailed steps...
    I work with Forms 6i, Apps 11.5.10.2 and DB 9.2.0.7.
    Thanks a lot.
    Jose.

    Hello Jose,
    I did using java program to call BPEL web services in 11.5.10.
    I pasted below the metalink note for your reference (Note:250964.1)
    The idea is first write a java program to call the webservice (in my case it is calling an BPEL web service, so this may not help directly), test it.
    Then port the java program as specified in the note, so that you could call your web service through concurrent manager scheduler.
    Is this ok?
    Thanks
    Arun.
    ======================================================
    Checked for relevance on 25-Apr-2007
    Application Install - Version: 11.5.8 to 11.5.10
    Goal
    ====
    How to register and create a Java concurrent program for Oracle Applications
    Release 11i
    Solution
    ========
    1. Create your Java Concurrent Program (JCP) , using a text editor.
    /*===========================================================================+
    | Concurrent Processing Sample Code |
    | |
    | FILENAME |
    | Hello.java |
    | |
    | DESCRIPTION |
    | Sample Java concurrent program |
    | About the simplest possible program, just writes a message to the |
    | logfile and output file. |
    | |
    | HISTORY |
    | $Log$ |
    | |
    +===========================================================================*/
    package oracle.apps.fnd.cp.sample;
    import oracle.apps.fnd.cp.request.*;
    public class Hello implements JavaConcurrentProgram {
    public static final String RCS_ID = "$Header$";
    public void runProgram(CpContext ctx) {
    ctx.getLogFile().writeln("-- Hello World! --", 0);
    ctx.getOutFile().writeln("-- Hello World! --");
    ctx.getReqCompletion().setCompletion(ReqCompletion.NORMAL, "");
    =======================================
    End Sample
    =======================================
    2. Create a sample directory under $JAVA_TOP:
    $ mkdir $JAVA_TOPoracle/apps/fnd/cp/sample
    3. Copy Hello.java into $JAVA_TOP/oracle/apps/fnd/cp/sample:
    $ cp $HOME/Hello.java $JAVA_TOP/oracle/apps/fnd/cp/sample
    4. Compile your java program:
    javac $JAVA_TOP/oracle/apps/fnd/cp/sample/Hello.java
    5. Test at the command line with following syntax:
    jre -Ddbcfile=$FND_TOP/secure/your_dbc_file.dbc \
    -Drequest.outfile=./outfile \
    oracle.apps.fnd.cp.request.Run \
    oracle.apps.fnd.cp.sample.Hello
    6. Register your custom java concurrent program with Oracle Applications.
    a. Navigate: Concurrent > Program > Executable
    b. Enter details into the form
    Executable: JCPHELLO
    Shortname: JCPHELLO
    Application: Application Object Library
    Execution Method: Java Concurrent Program
    Execution File Name: Hello (Insert a name that does not contain space or period)
    Execution File Path: oracle.apps.fnd.cp.sample
    c. Save the details
    d. Navigate: Concurrent > Program > Define
    e. Enter details into the form
    Program Name: JCPHELLO
    Program Shortname: JCPHELLO
    Application: Application Object Library
    Executable: Choose JCPHELLO from LOV
    Executable Options :
    f. Save the details
    7. Add this new concurrent request to your responsibility request group.
    a. Navigate > Security > Responsiblity > Request
    b. Query System Administrator
    c. Add new row and choose TestJava
    d. Save the changes.
    8. Run your new Hello Java Concurrent Program
    Navigate: Request > Run
    References
    ~~~~~~~~~~~
    Oracle Applications Developers Manual for Release 11i A75545-01
    ====================================================

  • How to delete e-mail recipients from your address book?

    How to delete e-mail recipients from your address book

    Firefox doesn't do email, it's strictly a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/] <br />
    or this one <br />
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • How to access a web service from a XLet

    Hello,
    I am new in software development to ITV and I dint find too many usefull information teaching how to access a web service from a XLet running in a STB. Are there anybody who can give me some help, maybe sample or tutorial?
    Gratefull
    David

    hi,
    you can "borrow" the source code from [Yambo a free soft open source presentation engine (AKA XML microbrowser Xlet )|http://www.cineca.tv/labs/mhplab/index-en.html] both local and on a http remote connection.
    hope it helps..
    bye
    andrea

  • PI 7.1 How to delete a published service from the service registry?

    Hello,
    I have the same problem in the pi 7.1, like Rahul in CE (Composition Environment) with the deleting of published services.
    How to delete a published service from the service registry?
    In the WS navigator I found only this operation:
    deleteClassificationSystemValues and deleteClassificationSystem
    I miss the operation deleteService.
    Have you an idea?
    Bye
    Stefan

    Hi all,
    I have opened an oss message and now I have an answer:
    Use this Service: ServicesRegistrySiService and the operation deleteServices with the logical key of the service as parameter.
    The logical key can be seen from the SR UI in the details of the endpoints.
    Bye
    Stefan

  • How do I install an APP from ITunes to my IPhone?

    how do I install an APP from ITunes to my IPhone?

    This is covered in the Iphone user guide.  I suggest you read it as syncing apps is a very basic function of the device.

  • How can i create proxy service from another proxy on different domain

    i have a demo webservice. it has many operations on proxy service's message flow. How can i create proxy service from demo's wsdl on different domain
    Edited by: fresh man on Jul 1, 2012 11:17 PM

    You can either export the WSDL in a sbconfig.jar and then import this sbconfig.jar in the new domain. Then you can create a new Proxy in new domain based on the WSDL you imported.
    Alternatively, you can open the WSDL in the old domain, copy the text content of WSDL, then open new domain sbconsole and create a new WSDL type resource and paste the content you copied from old domain WSDL here. Then you can create a new Proxy Service based on this WSDL resource you created.
    Although, may I ask why do you need to create this new Proxy Service on a different domain? If you want to create a service similar to existing Proxy Service on different domain, then you can export the existing proxy service along with any dependencies to a sbconfig.jar and them import them in any other domain.
    If you want your new Proxy Service to invoke the existing Proxy on different domain, then you need to create a Business Service in the new domain (calling domain) which can invoke your existing Proxy service in other domain.

  • How can i create proxy service from wsdl on different domain

    i have a demo webservice. it has many operations on proxy service's message flow. How can i create proxy service from demo's wsdl on different domain

    Hi fresh man
    This is the Oracle Forms forum, and your query has nothing to do with Forms.
    Please post on {forum:id=75}.
    Please search first. It usually helps to search before you post.
    Regards,

  • How to debug ABAP Web services from Microsoft Visual Studio

    When developing .NET based Web services clients using Visual Studio that call Web services in SAP NetWeaver .NET developers would like to be able to debug inside SAP. In my blog <a href="/people/andre.fischer/blog/2007/02/07/how-to-debug-abap-web-services-from-microsoft-visual-studio to debug ABAP Web services from Microsoft Visual Studio</a> I would like to point .NET developers to the fact that SAP NetWeaver offers the option of external debugging to perform this task. Though the steps that have to be performed are described in the SAP Online Help I am sure that this option is not well known amongst the .NET developer community.

    Hello WilliamIV,
    >>How can I "configure" Visual Studio debugger to allow validation to work?
    Since I do not have a VS2012 environment, according to your provided link, I created a test demo with VS2013, however, both ways catch the validation error:
    If possible, you could have a try with VS2013 to see if it works or run the example on other machine with VS2012 to see if this is caused by the VS environment, in my side, I do not change any configuration, all are default.
    If I misunderstood this issue, please feel free to let me know.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to call a  portal service from a servlet

    Hello all.
    I have a functioning portal service that I would like to call from a servlet.
    When I try to do so, I get a ClassCastException when I do this (on line two):
    IPortalRuntimeResources runtimeResources = PortalRuntime.getRuntimeResources();
    IDocumentPersistence docPer = (IDocumentPersistence) runtimeResources.getService(IDocumentPersistence.KEY);
    However if I do the following I can get a generic IService and use reflection to invoke the method (in the IDocumentPersistence interface) that I want to invoke:
    IPortalRuntimeResources runtimeResources = PortalRuntime.getRuntimeResources();
    com.sapportals.portal.prt.service.IService aService = (com.sapportals.portal.prt.service.IService) runtimeResources.getService(IDocumentPersistence.KEY);
    There must be a better way to use portal services (hopefully like scenario one above) in servlets. In web dynpro you can use portal services and cast them to the correct type. What am I missing?

    Hi Kim,
    how did you integrate the references to your Portal Service Interface into your web application?
    You should do this using the references in your application-j2ee-engine.xml, did you do this? It might be a problem with the classloader otherwise.
    The way you are calling portal services does work normally, however it is not the recommended way as it is documented in the SAP documentation.
    Please check the SAP documentation on how to access a portal service from a j2ee app:
    http://help.sap.com/saphelp_nw70/helpdata/EN/42/9ddd0cbb211d72e10000000a1553f6/frameset.htm
    Best regards,
    Stefan Brauneis

  • I recently cracked the screen on my iphone 5c, i would like to switch to a previously owned iphone 4.  How can i switch my service from my current device to my old iphone 4?

    i recently cracked the screen on my iphone 5c, i would like to switch to a previously owned iphone 4.  How can i switch my service from my current device to my old iphone 4?

    Ask your carrier.
    (122404)

  • How do I migrate mail folders from outlook on windows

    How can I migrate mail folders from outlook on windows

    Your best bet is to use Migration Assisant. Pondini has written an excellent guide located at:http://www.pondini.org/OSX/Setup.html and Apple discusses what will be imported in this advice letter http://support.apple.com/kb/HT4796

  • HT5467 how can i use location services from my pc to find my lost ipod?

    how can i use location services from my pc to find my lost ipod?

    Find My iPod
    http://www.apple.com/sg/icloud/features/find-my-iphone.html

Maybe you are looking for