How to read a data from USB port using JAVA

hi all,
i need to know how to read a data from USB port using java. any API are available for java ?.........please give your valuable ideas !!!!!!!!!
Advance Thanks!!

You can do this. Please use this link
[http://www.google.co.in/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=uHu&q=java+read+data+from+usb+port&btnG=Search&meta=&aq=f&oq=]
What research did you do of your own? Have you done some testing application and tried yourself??

Similar Messages

How to save a datas from serial port?

How to save a datas from serial port?

Hi
I need some help about rs-232 communication. I want to make a vi witch can do this things:
-read a txt file (to simulate a serial port like when the datas are coming)
i will get 3 different data in serial port (like this: 121 213 135)
i want to save in a txt file what datas get my vi
so
-write in a txt file or draw in a diagram (or both)
so my problem is: read in serial port and save in a file and draw a diagram.
if anybody can help pls HELP ME because im a beginner in this problem.
I already do something but Im not sure that good.
Thx for all.

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

I'm new to the LabView. How do I pass data from VI configured using Serial (CMTS using CLI commands to set Parameters ) to VI configured using GPIB(vector signal analyzer ) to measure such as RF frequency or power on the instrument? Thanks

I'm new to the LabView. How do I pass data from VI configured using Serial (CMTS using CLI commands to set Parameters ) to VI configured using GPIB(vector signal analyzer ) to measure such as RF frequency or power on the instrument?
I just want to set something on the front panel that will execute the Serial parameters first and then pass these settings to vector signal analyzer
Thanks
Phong

You transfer data with wires.
Frankly, I'm a little confused by your question. I can't think of any reason why you would want to pass serial parameters (i.e. baud rate, parity) to a GPIB instrument. Please explain with further detail and attach the code.

How do i get data from a structure using join?

hi,
what is the actual use of a structure.?
my problem is :
KUAGV is an existing STRUCTURE. it has got one fields each which links to MARA, AND VBKD tables. i want to fetch all related information from KUAGV, mara, vbkd . which is the better way : using joins or views or anything else? how do i
get data from a structure using join?

structure temporarily holds any data passed to it dynamically throughout the runtime but doesnot store it permanently. so
a structure cannot be included in a join.so instead of incuding structure KUAGV's field in a join
search the transparent table in which same field are present and use it in join.
A structure if created in DDIC(Data Dictionary) is a global DATA STRUCTURE which is used to group related information, for example you would group all the details of your bank account into a structure BANK_ACCOUNT that contains fields like account_Id, account_holder_name etc.
If you create a structure in your program then it is local to your program. So you use this structure to create data holders of this DATA TYPE to hold data in your program.
Edited by: suja thomas on Feb 11, 2008 6:24 AM
Edited by: suja thomas on Feb 11, 2008 6:31 AM

How to read a message from com port

i have a gsm modem connect to my pc though a serial port
how can i read the output from modem and use them in my java program
many thanks....

http://java.sun.com/products/javacomm/

How to read the data from excel file and store into the table?

Hi All,
I have table with BLOB datatype contains a excel file. I have to read that data from excel and store into one table with all the fields in excel.
All the excel fields and my table columns are same.
Can you share with me how can acheive this using LOB's?
Thanks

Hi OraSuirya,
you can try with external tables .
syntax as follows
create table ext_table_csv (
i Number,
n Varchar2(20),
m Varchar2(20)
organization external (
type oracle_loader
default directory ext_dir
access parameters (
records delimited by newline
fields terminated by ','
missing field values are null
location ('file.csv')
reject limit unlimited;
For this you need to create directory
Directory Creation syntax:
create or replace directory ext_dir as 'D:\oracle\user_dir\ext_dir';
grant read, write on directory ext_dir to <User>;
please paste the excel file in the particular directory .
I hope this will help you.
Please correct me if I am wrong anywhere .
Thanks,
Tippu.

How to read the data from a file in another computer with user name and password login

How to read read the data from a file in anohter computer which need to login with user name and password?

duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

How to read in data from MySQL to Authorware?

Hi,
I am trying to read in values from my database (MySQL) to
authorware, but the best I am able to get is true or false.
I would like to be able to get some data from the database
and return it to AW as a string. Does anyone have any experience
with this? Can anyone lend a helping hand in this endeavor?
Thanks in advance for your help,
Brad

"Paul Swanson" <[email protected]>
wrote in message
news:[email protected]...
> Kevin, you shouldn't need to worry about ODBC or OLEDB.
Your PHP script
> needs to handle the database connection, and you can use
PHP's
> mysql_connect() function for that. You really don't need
to do anything
> different for Authorware than you do for any PHP/MySQL
application in
> terms
> of connecting to the database.
>
> My PHP script returns data to AW in the form of
name=value pairs delimited
> by the ampersand character. I then use the following
code in AW to convert
> them into lists:
>
> =========================
> -- Use this routine to break queryString into name /
value arrays.
> -- Assumes a database query returns a string of
name=value pairs
> -- delimited by the ampersand (&) character.
>
> -- strip leading & from queryString
> queryString := SubStr(queryString, 1,
CharCount(queryString))
>
> -- break into list of individual lines
> tempList := Replace("&", Return, queryString)
>
> listLength := LineCount(tempList)
>
> -- create empty arrays for name and value
> name := Array("", listLength)
> value := Array("", listLength)
>
> repeat with counter := 1 to listLength
> singleLine := GetLine(tempList, counter)
> name[counter] := GetWord(1, Replace("=", " ",
singleLine))
> value[counter]:= GetWord(2, Replace("=", " ",
singleLine))
> end repeat
>
> -- now you will need to add a separate calc icon with a
routine to
> -- read the data from the arrays. name[counter] matches
value[counter]
> =========================
>
> I follow this with another Calc icon (I could have done
it all in one
> calc)
> that parses the names and assigns the values to my
custom AW variables:
>
> =========================
> -- get just the info we want, and store in variables
>
> repeat with counter := 1 to listLength
> if name[counter] = "Lesson1Complete" then
> Lesson1Complete := Number(value[counter])
> else if name[counter] = "Lesson2Complete" then
> Lesson2Complete := Number(value[counter])
> else if name[counter] = "Lesson3Complete" then
> Lesson3Complete := Number(value[counter])
> else if name[counter] = "Lesson4Complete" then
> Lesson4Complete := Number(value[counter])
> else if name[counter] = "Lesson5Complete" then
> Lesson5Complete := Number(value[counter])
> else if name[counter] = "Lesson6Complete" then
> Lesson6Complete := Number(value[counter])
> else if name[counter] = "Lesson7Complete" then
> Lesson7Complete := Number(value[counter])
> else if name[counter] = "Lesson8Complete" then
> Lesson8Complete := Number(value[counter])
> else if name[counter] = "OverviewComplete" then
> OverviewComplete := Number(value[counter])
> else if name[counter] = "grade" then
> score := Number(value[counter])
> else if name[counter] = "passed" then
> passed := Number(value[counter])
> end if
> end repeat
I'd like to point out here that any time you have a series of
variables that
all have identical names except for a number in the variable
name, you
should be looking at lists. I'm surprised, Paul, that you
have lists used
to the extent that you're able to use Value[counter] on the
right side of
the equation, yet you're not using lists on the left side of
the equation.
Let's look at how this code could be made super simple by
having ONE list
variable, LessonComplete, instead of Lesson1Complete through
Lesson8Complete.
-- Assumes a database query returns a string of name=value
pairs
-- delimited by the ampersand (&) character.
-- strip leading & from queryString
--(note you could also not add this ampersand on the PHP
side)
queryString := SubStr(queryString, 1, CharCount(queryString))
-- break into list of individual lines
tempList := Replace("&", Return, queryString)
listLength := LineCount(tempList)
-- create empty arrays for name and value
name := Array("", listLength)
LessonComplete := []
repeat with counter := 1 to listLength
singleLine := GetLine(tempList, counter)
name[counter] := GetWord(1, Replace("=", " ", singleLine))
LessonComplete[name[counter] * 1] := GetWord(2, Replace("=",
singleLine))
end repeat
-- now you will need to add a separate calc icon with a
routine to
-- read the data from the arrays. name[counter] matches
value[counter]
--No you don't...You're DONE :-)
Also note that this is extensible...you can have Lesson 9,
10, etc. and not
have to change the code. You can also lower the amount of
data being
transmitted, because now instead of Lesson8Complete=1 all you
need is 8=1.
This lowers the server load and speeds the response. It has
advantages on
the Authorware side as well, because if, for instance, you
had a series of
buttons that were checked or not based on the completion, you
could do the
same type of loop. Separate variable names do not allow for
that type of
loop unless you use Eval (ugh).
HTH;
Amy

Unable to capture data from Serial port using LVRT2010 in single core pentium 4 machine

I am using application written in Labview using windows Labview
Runtime environment 2010. Application creates a tunnel to intercept data from
Serial port.
My problem is, Currently, I am using single core Pentium
processor. When I am trying to intercept the data between COM1 and COM7 (COM 7
is a virtual port) it is not able to capture data.
When I am running Labview RT environment using dual core
processor machine it is running normally. I wonder whether it could be the compatibility issues with
single core Pentium processor.

Hi Magnetica
Are both of the machines running the same runtime engine,
drivers ect?
Have you had RT applications running on this
machine before?
Is the development computer a 64bit machine?
The processor is a supported model (See link below).
http://zone.ni.com/devzone/cda/tut/p/id/8239
Regards
Robert
National Instruments UK & Ireland

EMac to iMac - How do I transfer data when USB ports don't work?

I just bought a new iMac to replace my old eMac and I need to transfer the data from the eMac to the iMac - here's the problem - the USB ports on the eMac aren't working, the devices work fine like keyboard & mouse but the USB ports are dead. I can't hold down any keys as it starts up to make it a fire wire device etc. So how can I do this??
Thanks in advance for any help.

Here's Apples quick assist.
I also have this USB faq.
 Cheers! DALE

VISA read raw data from USB board Analog Devices ADISUSBZ

Hi
I am trying to use VISA to read the raw data from a USB dev board (Analog Devices ADISUSBZ). but always get below errors
"BFFF003A Unable to start operation because setup is invalid."
what I did.
1) uninstalled and deleted the origanl USB driver for ADISUSBZ
2) plugin ADISUSBZ USB Dev board, windows see a unknow device, using VISA Driver Wizard to create a USB driver inf file for ADISUSBZ
3) installed the new driver which VISA Driver Wizard created, restarted computer, ADISUSBZ is identified and loaded with VISA USB driver. also showing "This device is working properly."
4) Run Measurement & Automation Explorer, in the Devices and Interfaces list, I can see that USB device which is the ADISUSBZ. but the name is
Unkown USB0::0x0456::0xEF02::NI-VISA-40002::RAW (the VID PID tell me, it is the ADISUSBZ USB Dev board)
5) Open VISA Test panel -> View All Settable Attributes, I got below data, where VI_ATTR_USB_BULK_IN_STATUS = -1 (not active???)
VI_ATTR_TMO_VALUE = 2000
VI_ATTR_MAX_QUEUE_LENGTH = 50
VI_ATTR_TERMCHAR = 0x0A
VI_ATTR_TERMCHAR_EN = VI_FALSE
VI_ATTR_IO_PROT = 1
VI_ATTR_SUPPRESS_END_EN = VI_FALSE
VI_ATTR_USB_MAX_INTR_SIZE = 1
VI_ATTR_USB_CTRL_PIPE = 0x0000
VI_ATTR_USB_BULK_OUT_PIPE = 0xFFFF
VI_ATTR_USB_BULK_IN_PIPE = 0xFFFF
VI_ATTR_USB_INTR_IN_PIPE = 0xFFFF
VI_ATTR_USB_ALT_SETTING = 0
VI_ATTR_USB_BULK_OUT_STATUS = -1
VI_ATTR_USB_BULK_IN_STATUS = -1
VI_ATTR_USB_INTR_IN_STATUS = -1
VI_ATTR_USB_END_IN = 5
6) Basic I/O -> viRead , set count to 1 or default 1024 , execute
return status is always BFFF003A
I searched in error list, it says
"BFFF003A Unable to start operation because setup is invalid."
any idea what is wrong? help
BTW, the ADISUSBZ USB board works fine, test with its own software, it is not hardware faulty
Eric

Hi Eric
I have a few questions for you as well as a number
of likes that will help you.
What software are you using NI VISA with is it just
Measurement and automation explorer ?
Which version of NI VISA are you using?
Which operating system are you using?
In measurement and automation explorer is there a
yellow question mark against the device?
I would advise reading the likes below if you have
not already creating the VISA driver again checking the manufacture ID and
model code if these options are available to you.
The following link will help you with the VISA
http://digital.ni.com/public.nsf/websearch/E3A2C4FE42D7ED0D86256DB7005C65C9
This tutorial gives a step by step guide on how to
create a VISA driver.
http://zone.ni.com/devzone/cda/tut/p/id/4713
The Difference between USB Raw Control and USB Raw
Bulk
http://digital.ni.com/public.nsf/allkb/400D6EAB5CFE1C6B86257395005F5D48?OpenDocument
Can VISA Read be used to read USB Interrupt Data?
http://digital.ni.com/public.nsf/allkb/D38E5A65DA54C9A2862571E900810FEA?OpenDocument
Regards
Robert
National Instruments UK & Ireland

How to read the data from an internal table,when column names are known

Hi All
I have a specific requirement. I got an internal table with many fields (let it be my_tab). Some of the fieldnames (column names in internal table my_tab) are stored in separate internal table(let it be my_fields).
I need to store/read data corresponding to the fields (whose name is stored in my_fields) from my_tab.
I am able to build dynamic table (referred by field-symbol) with respect to the given field names in my_fields.
But i am unable to read the data corresponding to the fieldnames from my_tab.
Please provide me some pointer in this regard.
Regards
Swetabh Shukla

HI All
Thanks for the prompt response. I got solution for my question. Please check below thread. For quick reponse i posted my question in one more category. Thanks to all of you.
How to read internal table w.r.t. fieldnames stored in other table

How to read the data from a column that is in clob data type (but XMLdata)

Hi ,
I have a table XYZ which has a column RESPONSE_XML in clob datatype format.we can convert it to XMLTYPE(RESPONSE_XML) to read the data in XML format.
Now this is the DynamicXML schema file. Here I want to see all the COMMONNAME, ResourceDescribedby_VALUE into column_A, ResourceDescribedby_ResourceSpecCharacteristic_Name tags into column_B
How can I do that .. any suggestions please ..
Here is a sample XML:
<?xml version="1.0" encoding="WINDOWS-1252" ?>
_- <soap:Body>
- <SearchResourceResponse xmlns="http://www.google.com/google.xsd">
- <MessageElements xmlns:tns="http://www.www.google.com/google.xsd" xmlns="">
<MessageStatus>SUCCESS</MessageStatus>
- <MessageAddressing>
<from>gmail</from>
<to>Gmail SOAPTester</to>
<messageId>1234</messageId>
<action>SearchResource</action>
<transactionId>OR</transactionId>
<ServiceName>SearchResource</ServiceName>
<ServiceVersion>1.1</ServiceVersion>
</MessageAddressing>
</MessageElements>
-<SearchResponseDetails xmlns:tns="http://www.www.google.com/google.xsd" xmlns="">
- <SubNetwork>
- <Pipe xsi:type="icl:Trail" xmlns:icl="http://www.www.google.com/google.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<CommonName>318-223-4675</CommonName>
<objectID>91535716980514105329</objectID>
<SourceSystem>MARS</SourceSystem>
- *<ResourceDescribedBy> <value>RDSSLA</value>* *<ResourceSpecCharacteristic> <name>*CentralOfficeCode</name>   </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceRelationship>
- <Resource xsi:type="icl:Trail">
- <ResourceDescribedBy> <value>001</value> - <ResourceSpecCharacteristic> <name>AssignLocationExternalFormat</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceDescribedBy> <value>001</value> - <ResourceSpecCharacteristic> <name>PairVerticalExternalFormat</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceDescribedBy> <value>001</value> - <ResourceSpecCharacteristic> <name>PairVerticalInternalFormat</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceDescribedBy> <value>+</value> - <ResourceSpecCharacteristic> <name>PairVerticalSign</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceDescribedBy> <value>RDSSLA</value> - <ResourceSpecCharacteristic> <name>CentralOfficeCode</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceDescribedBy> <value>B</value>- <ResourceSpecCharacteristic> <name>EntityType</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceType>FeederCircuit</ResourceType>
- <LogicalPhysicalResource>
- <PhysicalResource xsi:type="icl:PhysicalConnector">
<usageState>S</usageState>
- <ResourceDescribedBy> <value>25.392</value> - <ResourceSpecCharacteristic> <name>CableLength</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
</PhysicalResource>
</LogicalPhysicalResource>
- <TerminationPoint xsi:type="icl:TrailTerminationPoint">
<CommonName>1000/34A</CommonName>
- </Resource>
</ResourceRelationship>
<lrStatus>W</lrStatus>
</Pipe>
</SubNetwork>
</SearchResponseDetails>

you don't appear to have posted valid XML, so I can't reproduce using your example, but you will need to look at something like this:
select xtab.common_name
from your_table yt
      ,xmltable('/SearchResourceResponse'
          passing xmltype(yt.response_xml)
          columns
              common_name varchar2(20) path 'SearchResponseDetails/CommonName'
      ) xtab
;

How to read the data from a sorted table

Hi all,
How to read data from the sorted tables. Please provide some examples.
Thanks and regards,
Lisa

You can read like this :
DATA: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB LIKE SORTED TABLE OF LINE WITH UNIQUE KEY COL1.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2.
INSERT LINE INTO TABLE ITAB.
ENDDO.
CLEAR LINE.
READ TABLE ITAB WITH TABLE KEY COL1 = 3
                INTO LINE TRANSPORTING COL2.
WRITE:   'SY-SUBRC =', SY-SUBRC,
       / 'SY-TABIX =', SY-TABIX.
SKIP.
WRITE: / LINE-COL1, LINE-COL2.

How to read a data from USB port using JAVA

Similar Messages

Maybe you are looking for