How to read application server multiple times?

Hi.
As a requirement we are reading a file from application server, once its done we  are placing that file into other folder, now we need to check whether there are other files present there if yes then process or come out.
Regards
Mohinder

Hi.,
What are the file names you searching for? I mean do you have file names(more than one) with you?
If so, you can create the ranges(say).
And loop that ranges internal table to fetch all files from the application server!
Here as of my knowledge there is no alternate other than using READ DATA SET statement repeattedly(like above).
__Naveen Inuganti.

Similar Messages

  • Upload client data to task server multiple times in same day

    I am just getting started setting up the task server piece of ARD. My task server is an Xserve(PowerPC 10.4) and my client computers are mostly eMacs running 10.4. My client computers are all running Deep Freeze by Faronics which causes the hard drive to be restored to it's original state after a restart.
    My question is - where does the report information about the client computer get stored before it is uploaded to the task server. Is it cached on the local client machine? My concern is that if the client computers don't upload their data until the end of the day and a student restarts a computer during the day we won't have a whole day of data recorded for that machine.
    If this is the case, is there any way to upload the data to the task server multiple times in the same day?
    Thanks!

    I am collecting User History and Application Usage. Where is the cache stored - on the local client machine or on the task server? If it's stored on the local machine and one of the students restarts the computer the data will be gone because of the Deep Freeze program. That's why I'm trying to figure out a way to upload the data multiple times throughout the day.
    I'm hoping that the data is cached on the task server so that I don't have to try to upload multiple times.

  • How to read a server side file in Applet?

    When I used ZipFile like this,
    ZipFile zf = new ZipFile("http://xxx.com/res.jar");
    It throwed exception about access denied, File pemission...
    How to read a server side file in Applet?

    You generally can't tell with Stream how many bytes are going to be available. You could download the whole thing into a ByteBuffer, for example, and process it from there.
    Or you can try opening an http connection explicitly (using URL and casting the connection to HttpURLConnection and see if there's a "Content-length" header.

  • How to read the date and time information of a file by labview

    how to read the date and time information of a file by labview? for example, created time and modified time.
    Solved!
    Go to Solution.

    if you need to know the last modification date of file:-
    "Functions->File I/O->Advanced File Functions->File/Directory Info.vi"
    This vi returns the value of file's last modification date. This is returned as U32 number. To see it in MM/DD/YY format you must create the indicator, right-click on it and select "Format & Precision" item from drop-down menu. Then select "Time and Date" format there.
    Thanks as kudos only

  • How to display application server date and time?

    Hi Friends,
                    I am getting error when i am trying to display default date,time and client.
    I have designed a screen where DATE, TIME and CLIENT are 3 fields in the screen this 3 fields i have to display defaultly date,time and client of the application server.
    In the data declarations i have declared like...
    DATA: DATE LIKE SY-DATUM,
               TIME LIKE SY-UZEIT,
              CLIENT LIKE SY-MANDT.
    In the PBO screen source code i am writeing like...
    write: 'DATE', SY-DATUM, / 'TIME', SY-UZEIT, / 'CLIENT', SY-MANDT.
    But i am not able to display the output please can anyone point my mistake where i am going useful will be rewarded.
    Thks

    Hi Reddy,
    I will tell u how to get this done .
    Check all these screen shots .No work at all .
    [Screen shot 1|http://bp3.blogger.com/_O5f8iAlgdNQ/R-icwCm1qvI/AAAAAAAAA9k/7gshn3AKOZ0/s1600-h/date1-715845.jpg]
    [Screen shot 2.|http://bp1.blogger.com/_O5f8iAlgdNQ/R-icwim1qwI/AAAAAAAAA9s/QMtdiWyB-nY/s1600-h/date2-718517.jpg]
    [Screen shot 3|http://bp2.blogger.com/_O5f8iAlgdNQ/R-icwym1qxI/AAAAAAAAA90/4GnH-bwAPEo/s1600-h/date3-719013.jpg]
    There is no work at all . only onething what u have to do is, give field length 8 on the screen for Time field. thats it .
    Regards,
    Venkat.O

  • How to know portal server starting time

    Dear gurus
    How to know the portal system or portal process's  (server0/server1/SDM/dispatcher)  starting time or stopping time. like in Tcode: ST02 it will show the server started time
    as i want to know when it has restarted...
    Thanks in advance

    You can use the SAP MMC (windows application) or Java MMC online : http://server:port+13
    e.g. if your port is 50000 then the Java MMC is on port 50013
    Is there you can have what you need.
    Fabien.

  • How to play one clip multiple times at the same time?

    I am writing a little game where a certain sound has to be played quite frequently. I load it as a Clip and play it with
    myClip.setFramePosition(0);
    myClip.loop(0);If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
    A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
    So here it goes: How can I play a single sound multiple times at the same time? Is that possible?
    Edited by: andrasz on Feb 27, 2009 12:37 AM

    If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
    A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
    So here it goes: How can I play a single sound multiple times at the same time? Is that possible?Ummmm, if you're using a clip, you'll have to maintain one copy per object that needs to play the sound concurrently. You could keep one master copy, and then create copies of the clip as necessary to play them, and then just dump the copies to decrease memory consumption.
    A second idea would be to write your own Clip class. Esentially, all you would need to do is dump some sound data onto a TargetDataline to play it. It'll handle the buffering and playing at the correct speed itself. If that's all you did, you should be able to dump multiple times from the same instance and play it multiple times.
    Obviously, that's just a theory. In practice, it may not work that way...

  • How To Populate Application Server Dropdown List In JCo Destination

    Hi guys, I'm currently working on EP7 and just finished installing the ESS Business Package. The next step is to maintain the JCo Destinations in the Web Dynpro Console and here's where I got stuck. When I got to step 4.1 the field for the Application Server is a drop down list with no items in the list. How do you populate this list? Thanks in advance!

    Figured it out! Maintain an Web AS ABAP Technical System in the SLD.

  • Read Application server file and upload into internal table

    Another help needed guys,
    My file in the application server is of format
    Name       Marks 1    Marks  2       Marks 3............
    A                10             15               20
    The only thing separating the columns is space.
    Actually this file was downloaded from an internal table into the app server.
    Now I want to load it back into the internal table.
    How do I load this into internal table so that each column goes in separate internal table field.
    Currently am using cl_abap_char_utilities=>HORIZONTAL_TAB but I can get only the first column name in my field1 of the internal table.
    How should I applroach this?
    Points will be awarded for useful answers.
    Regards
    Ankit

    Hi ankit,
    i think u have uploaded the tab delimited file in the application sever.
    then suppose see if u r file is in the format of name#marks1#marks2#marks3.
    then in the program u do like this..
    first declare one internal table with one filed.
    data:
      c_hextab(1)      TYPE x VALUE '09'.
    data:
      begin of t_data occurs 0,
          line(256) type c,
      endof t_data.
    and declare one more intternal table
    data:
    begin of  t_itab occurs 0,
      name(15)    type c,
      marks1(4)   type c,
      marks2(4)   type c,
      marks3(4)   type c,
    endof t_itab.
    then
    open the file with
    OPEN DATASET p_file FOR INPUT IN TEXT MODE.
    then  between do and endo do like this..
    DO.
    clear t_data.
    READ DATASET p_file INTO t_data.
    if sy-subrc ne 0.
      exit.
    else.
    split t_data at c_hextab
          into t_itab-name
                t_itab-marks1
    t_itab-marks2
    t_itab-marks3.
    append t_itab.
    endif.
    enddo.
    i think it will be helpful to u
    Please let me know wht type of file has been uploaded into application server.(tab deleimted, comma separated or something else).
    Regards,
    Sunil Kumar Mutyala.

  • HOW TO OPEN APPLICATION SERVER GRID CONTROL

    hi,
    i m working on application server 10g on windows i want to open application server grid control but not been able to how to do this .
    how to know path to put in browser ?
    any one can help me ?
    thks
    bye

    I think Metalink NOTE:280116.1 covers changing the ias_admin password when it's forgotten.
    Basically, you edit $ORACLE_HOME/sysman/j2ee/config/jazn-data.xml and remove the <credentials> property.
    Then you can reset the password with: $ORACLE_HOME\bin\emctl set password reset <new password>
    Or, sounds like you can put the password into jazn-data.xml (NOTE:280587.1) by editing the <credentials> property:
    Replace the existing encrypted password with the new password.
    Be sure to prefix the password with an exclamation point (!). For example:
    <credentials>!mynewpassword123</credentials>

  • How to access application server 10g, if client machine is proxy settings.

    hi,
    i have installed oracle application server 10gR2, on vertual machine, windows2003
    my forms are stored in forms folder , i can access the application/forms
    throuhg client machines, if proxy setting is unchecked, but if proxy is chacked can't access application.
    as there with the user machine is required with proxy setting. how
    to access the application. i mean what is the configuration.
    in application server so that any computer (client machine)
    can access weather it is having proxy setting or not.

    now i enabled the java console to see the trace, there i found. if proxy is checked in client brouser with 8080 port which is required by organisation.
    Oracle JInitiator: Version 1.3.1.22
    Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\fresh
    Proxy Configuration: Manual Configuration
    Proxy: eproxy:8080
    Proxy Overrides:
    Jar cache disabled by user
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    q: hide console
    s: dump system properties
    t: dump thread list
    x: clear classloader cache
    0-5: set trace level to <n>
    load: class oracle.forms.engine.Main not found.
    java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Where as if there if i remove proxy setting by uncheck. then application goes smoothly.

  • How to run a webdynpro multiple times by passing different parameters each time and save webpages with parameter name?

    Hi Experts,
    I am a BW consultant and new to webdynpro. Not sure how to run RSO_METADATA_REPOSITORY multiple times and by passing different parameter values each time(either taken from an a standard BW table or user provided - anything is fine) and build web pages with parameter name. Need help with direction on where to start.
    Let me step back and explain my requirement:
    In BW we have an object called transformation.
    One way of generating documentation for transformation is highlight transformation and press F1. Then its documentation will be opened as a local web page.
    I need these web pages for all transformations. This is my requirment.
    I came to know that RSO_METADATA_REPOSITORY is beeing used to generate this web page.
    The web link is something like below:
    http://ubw05.xxx.com:8005/SAP/BW/DOC/METADATA/?page=BW_O_D&SystemID=BWPCLNT100&ClassID=TRFN&ID=0KHR6J65AIIUTCJZEC093K6XDFV909PB&objectVersion=A&sap-language=EN&sap-client=100
    When i run this link seperately(not by selecting transformation and pressing F1) i need to enter login credentials to BW system.
    My challenges is how do i pass login credentials and multiple transformation IDs to generate multipe web pages with each page named by transformation ID?
    WHere to start? First of all is RSO_METADATA_REPOSITORY Webdynpro JAVA or webdynpro ABAP or can i use anything?
    Since it is beeing opened as local webpages i assume it is webdynpro JAVa is that correct?
    Thanks,
    Raghu

    hello,
    might be a problem with the version you are using.
    regards,
    the oracle reports team

  • How to access application server path in sap

    Hi All,
      Could you please help me how we can navigate application serverpath; for example in my job the file is placing at this directory /usr/sap/interfaces/WAP/100/MM/OUT/SOFTCONQAG/ARCHIVE in application server, How can I go to that path to check weather file is avilable or not.
    Regards,
    Muralikrishna.

    Hi,
    U can access through AL11 transaction. But please note that not all will be having the access to perform this.
    Thanks & regards,
    Prakash Ghantasala

  • How to show the region multiple times on the same page

    Hi,
    I have a PL/SQL Dynamic Content region which creates a report with custom layout using pl/sql web toolkit. The stored procedure takes the parameter and creates report. Can I display the same region multiple times by calling it from loop with different parameter each time ?
    Thank you,
    Asha

    Hello Asha,
    In your plsql you can do a loop, so you would only have one plsql region but in there that can generate different areas of your website.
    e.g. it can loop and generate different divs or tables.
    Regards,
    Dimitri
    http://dgielis.blogspot.com/
    http://www.apex-evangelists.com/

  • How to find Application Server version

    Environemnt details:
    EBS->R 12.0.6
    Database->10.2.0.2
    OS->AIX 5.3
    All 64-bit
    How I can find the exact version of the Application server. I just see two directories:
    /u01/R12/apps/tech_st/10.1.3/
    /u01/R12/apps/tech_st/10.1.2/
    Please help me out.
    Regards,
    M.U.N.A

    Actually I have to install patches <<patch 6497684>> and <<patch 7426842>> and not clear for which iAS version it should be installed.
    There are two options:
    10.1.2.2
    10.1.2.3
    Edited by: M.U.N.A on Oct 29, 2010 11:55 AM

Maybe you are looking for