How to read files on Raid 0 from within Bootcamp Linux

Hello everyone. I wonder if someone can help me.
I run Linux Mint on Bootcam on my Mac Pro 3.1. I can access all drives and partitions on Mac or external ones except the Raid 0 which I set up on the hard drive bays 3 and 4. I guess this is because it's only recognised as raid0 by OSX and not Linux. As a result I cannot access any files on either of the two drives. Is there any way at all this can be done by setting up some kind of a shared folder on the raid or something? Many thanks in advance. 

I only used Paragon's NTFS which is very fast and better than any, and their HFS for Windows (demo) which has been fast and flawless.
Always running the OS natively, never a VM.
Never an issue with performance and everyone has said they get good disk I/O with Paragon NTFS. No idea why you don't or if their other driver is just not good. Their HFS driver replaces Apple's. Of course it is safe. Apple's is the one that at least use to be the POS.
Boot Camp means, Windows on Mac, to me, and doesn't really talk of or support other operating systems. Don't even need Boot Camp to install Windows on its own dedicated drive with your mac pro. The Apple drivers (too many uses for one name) are good to add but are not essential with Windows 7 and above.

Similar Messages

  • [Urgent] How to read files from different directories?

    I am new to Java Programming, I would like to know how to read files from directories other than the current one? (example as follows)
    ProjectDirectory
    |--MainDirectory
    |--MainProgram.java
    |--SupplementDirectory
    |--SupplementProgram.java
    |--Pictures
    |--Image.gif
    What should I write in the MainProgram.java so that I can use the supplementProgram.java from MainProgram and read the Image.gif file from the MainProgram.java?
    Thanks

    Run through the I/O tutorial here. It should get you up to speed on this sort of thing...

  • How to read a tab seperated data from a text file using utl_file

    Hi,
    How to read a tab seperated data from a text file using utl_file...
    I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....
    Thanks in advance...
    Naveen

    Naveen Nishad wrote:
    How to read a tab seperated data from a text file using utl_file...
    I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....If it's a text file then UTL_FILE will only allow you to read it a line at a time. It is then up to you to split that string up (search for split string on this forum for methods) into it's individual components.
    If the text file contains a standard structure on each line, i.e. it is a fixed delimited structure, then you could use external tables to read the data instead.

  • How to read and write a data from extrenal file

    Hi..
    How to read and write a data from extrenal file using Pl/sql?
    Is it possible from Dyanamic Sql or any other way?
    Reagards
    Raju

    utl_file
    Re: How to Create text(dat) file.
    Message was edited by:
    jeneesh

  • How to copy file to another server from database using FTP in oracle

    How to copy file to another server from database using FTP in oracle.
    Please do the needfaul.

    Billy  Verreynne  wrote:
    BluShadow wrote:
    Not to mention that some FTP servers can return more than one return message per operation whereas others may return one message for the same operation.I had the problem using the LIST command to determine if a file exists on the server. Cannot be determined via the FTP server's return code. Which means parsing and checking the text response from the server to the command. And this vary from server to server.
    But the basics were quite easy to code. The entire package is 500 lines, includes comments and blank lines for formatting, and supports the basic FTP client command set. Not really a complex piece of software to write - but I found that many developers seem to think that writing network socket software is complex. Not really the case...Mine's a big larger, but incorporates functionality similar to what Chris provided in his, such as being able to use SQL to query a remote file using pipelined functions, or functionality to write the results of a query directly to a remove file.
    :)

  • How to browse files in time capsule from outstate?

    how to browse files in time capsule from outstate?

    I presume by outstate you mean remote access ie from internet in a different location??
    If so google for remote access time capsule.
    It is simple if you have TC setup as the main router and a static public IP.
    Just go to finder, go, go to server and type in AFP://IPofTC
    The TC has to be checked to allow wan access and use a decent password as the security for AFP is poor.

  • How to call up an executable file (eg. MSPaint) from within my java program

    How to call up an executable file (eg. MSPaint) from within my java program

    Ummm... why would you want to get MSPaint anyway? Even in the absense of real software, Java's own graphics tools are way more sophisticated - with a little time and effort, you could write a simple paint package that beat MSPaint hands down.

  • How can I remove leftover RAID metadata from my reserve partition?

    I asked this question in the Microsoft community forum and was sent here by
    Ruth Buruga a Microsoft Support Engineer Any help would be appreciated.
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/how-can-i-remove-leftover-raid-metadata-from-my/ce2352c0-eeda-4efd-a9a8-e77f36668fce?tm=1415452409584

    You will have to clean the HDD.
    You can use diskpart to delete all existing partitions and partition table,  See info @
    http://technet.microsoft.com/en-us/library/bb490893.aspx and
    http://technet.microsoft.com/en-us/library/cc766465(v=WS.10).aspx
    Or you can use a 3rd party utility downloaded from the internet or the HDD manufacturer to clean the HDD.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Opening a file (viewed as icons) from within application  icons too large!

    Help! I'm not a newbie LOL.. I don't know when this error happened but apparently I cant just do a command J to get the view options to pop up while in an application. Here's my problem. I can view files as icons prefectly from within finder. I setup the default a long time ago and it is formatted fine. Now when I open a file from any application, for instnace firefox or NeoOffice.. .. all the icons are like 120x120 in size.. annoying. I attempted to use Alt-J to pop up view options, no go.. it appears you can't bring up view options while opening a file as an app, you can only alter view type.. icons/list/etc. Is there a command I can issue in applesrcipt or whatever to popup view options so I can fix this ?
    I THINK I know how I foobarred it. I was playing around with preview and I jacked up the icon size so I can see larger images of the home movies I created.
    that was when I was running 10.4.x
    I've been looking through the knowledge bases, I didn't see anything.
    Your help would be appreciated.
    Thanls.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Possibility to execute Acrobat Pro's "Combine files into PDF" function from within SAP?

    Good day.
    Presently, a company uses Acrobat Pro to manually combine files such as *.pdf, *.jpg, *.doc, which have been downloaded from SAP's Document Management System, into one pdf file. I would like to know if it is possible to automatically execute Acrobat Pro's "Combine files into PDF" function from within SAP (ECC 6.0) application system. I'm wondering if this could be achieved from a program via OLE (Object Linking and Embedding) or RFC (remote function call).
    Thanks in advance for your thoughts and inputs.

    Yes, you can combine PDF files via IAC/COM methods.

  • How to read file from remote machine

    Hello,
    Hi, i would like to know how to read text file from remote machine using java source code, any code ?
    Thanks very much;
    Best regards
    Kim

    On the server, perform the following steps:
    Parse the request and determine the file to serve
    Open a FileInputStream to the appropriate file
    Obtain a reference to the Servlet OutputStream
    Pipe the bytes from the file to the output stream
    Flush and close the streamYou might want to call HttpServletResponse.setContentType("application/octet") to indicate to the browser that a file download will be occurring. Do so before getting the reference to the Servlet's OutputStream.
    - Saish

  • How to read data in binary form from file?

    Hi,
    i try to write an implementation of LZW. I need to read data in binary form from a file. How can i do that? I cannot find something like "binary input stream" ...
    Thanks

    Hi,
    i try to write an implementation of LZW. I need to
    read data in binary form from a file. How can i do
    that? I cannot find something like "binary input
    stream" ...
    ThanksInputStream reads bytes. I don't understand your question.

  • How to read file from server if I have a logical file path?

    Hi guys,
    I'm having a pretty "on the run" question,
    My program is currently reading a file from server using "open dataset" with file path like this (just example)
    /usr/interface/abc/bcd/testfile.dat
    Now I got a requirement to make it more consistent to read files, instead of reading that physical file name, I should read the files from a specific folder using logical path.
    So I go to T code "FILE" and created a logical path called ZABC_FILE_PATH, unix compatible, with physical path is (for example),
    /usr/interface/<sysid>/<client>/<filename>
    My question is, can I still use open dataset statement to read this? if yes, how do I do that? If no, there should be alternative way, please let me know what you think. Thanks,

    Thanks all, I figured it out.
    ONe thing is that typo double quote
    The other thing is the importing part, I need the full file path.
    CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
      EXPORTING
        CLIENT                           = SY-MANDT
        logical_path                     = 'ZABC_MY_LOGICAL_FILE_PATH'
    *   OPERATING_SYSTEM                 = SY-OPSYS
    *   PARAMETER_1                      = ' '
    *   PARAMETER_2                      = ' '
    *   PARAMETER_3                      = ' '
    *   USE_BUFFER                       = ' '
        file_name                        =  v_1
    *   USE_PRESENTATION_SERVER          = ' '
    *   ELEMINATE_BLANKS                 = 'X'
      IMPORTING
        FILE_NAME_WITH_PATH              = v_what_I_need
    * EXCEPTIONS
    *   PATH_NOT_FOUND                   = 1
    *   MISSING_PARAMETER                = 2
    *   OPERATING_SYSTEM_NOT_FOUND       = 3
    *   FILE_SYSTEM_NOT_FOUND            = 4
    *   OTHERS                           = 5
    I really appreciate your contributions, thanks again!

  • How to read the 'full resolution composite' from a .psd file?

    I'm working with 16-bit .psd files and have the "maximize compatibility" switch turned on in CS2. When a file is saved, a message box appears indicating that PS is generating a "full resolution composite." I'd guess this is stored in the .psd file somehow, because some of the 3rd party image viewers are able to display the image when the compatibility switch is used, but are unable to display the image otherwise.
    My question is: how can I read this full resolution composite from the .psd file outside of Photoshop?
    If this is the wrong forum to post this question, I'd appreciate it of you'd tell me a better place.
    Thanks,
    Dave H.

    As you guess, it is stored in the PSD, but only with the Maximise Compatibility switch. Without that switch, a dummy image is stored which has the text "This layered Photoshop file was not saved with a composite image.", in English, German, Japanese and French.
    My program
    psdparse extracts each layer in an 8-bit file as a PNG, and the merged image for both 8- and 16-bit files. That link is to a Subversion repository containing source code.

  • How to read file from server

    Hi,
    When i try to read file from server,the following message is displayed .
    ORA-29532: Java call terminated by uncaught Java exception: java.security.AccessControlException: the Permission (java.io.FilePermission /tmp read) has not been granted to EWMTRACKTEST. The PL/SQL to grant this is dbms_java.grant_permission( 'EWMTRACKTEST', 'SYS:java.io.FilePermission', ' /tmp', 'read' )
    ORA-06512: at "EWMTRACKTEST.GET_DIRLIST_EWM", line 1
    ORA-06512: at line 1
    thanks and regards
    P Prakash

    it seems obvious, user EWMTRACKTEST doesn`t have access to directory /tmp and the file under that.
    try to give read permission and try again.
    you could use command line like 'chmod' to grant permissions.

Maybe you are looking for