How to read menu painter detail

Hi All,
I have created a new program and it screen 1000. I also created a menu painter (GUI status) for thsi screen. Now I want to know all the detail of this status into another program. From where I can get what are the details of this GUI status. Is there any FM, Report, Tables, Views ..
Please help me
Thanks
Chetan

HI Chetan,
Please have a look in the Function group ---> SEU1 .
Below function modules are retrieving PF status related details.
RS_CUA_GET_STATUS_FUNCTIONS
RS_CUA_GET_FUNCTIONS
Hope it helps.

Similar Messages

How to read SOAP request details pre send in applescript

Hello All.
Please can someone help me, I have written a SOAP applescript to connect to a web service and although i can compile and run the script, I'm getting a response error of "INTERNAL ERROR".. what I'm now wanting to do is ensure the SOAP call has everything needed for the call. The problem is im not sure of the syntax displaying what the SOAP details are.
Below is my applescript, please is someone able to tell me the extra /debug code needed so that i can see what applescript is sending to the SOAP webservice.
tell application "https://api.betfair.com/global/v3/BFGlobalService"
(call soap ¬
¬
¬
{method name:"login", SOAPAction:"login", method namespace uri:"http://www.betfair.com/publicapi/v3/BFGlobalService/", parameters:{locationId:0, username:xxxx", password:"xxxxx", productId:82, vendorsoftwareId:0, ipaddress:0}} ¬
end tell
Thank you all>!
Regards
Iain Smith

hi
good
go through this weblog, this might help you to solve your problem.
/people/thomas.jung3/blog/2005/06/05/web-services-the-case-of-the-missing-soap-action-header
thanks
mrutyun

In menu painter how to ctreate sub objects .?

Hi friends,
I need to add an extra code to a list in the Menu bar lists in the Menu painter. but the problem is there are already 15 codes in tht list ,so i canot insert a new code. The only solution is to add sub codes to an existing code.but i don't know how to add subcodes to the existing codes.
PLs help.

you can create sub objects in menu bar
just double click the menu bar and it will show the option to add the first level menu.
Code Text
Test >
to add the menu options at next level do not give any function code . give the text and enter it will open the editabble grid to enter the next level menu option codes.

Menu painter with default application toolbar

Hi All,
1. I'm developing a report with customised menu ,Here I want to customise only menu bar not application toolabar.
and I want the default SAP application tool bar is it possible ? if yes then How?
2.In the same report i have developed a selction screen where the user has to enter few mandatory fields,but here the problem is
I need to show a table informaion upon clicking one customised menu button 'DETAILS'.
but when I'm clicking this button report is asking me to enter the mandatory fields..how can I avoid this?
Thanks in Advance,
Shree.

HI,
when you set your own pf status and develop a menu tree, it is not possible to get standard one
both at a time. Anyway you can write BACK function code for three exit button if your program
doesnot contain secondary list and if you observe rest of the buttons in the toolbar like FIND,
FIND NEXT, PRINT will be activated anyway.
For the second query if you declare fields as mandatory that means all this fields need to be
filled before you process further. So only way is remove obligatory in parameter and set default
values.
Regards and Best wishes.

Why is my macbook pro running slow. It runs slow even if only one app is open, especially if it's a browser. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)

Hi. This is my first time posting. My Macbook Pro with Os X Mavericks has been running super slow since before I installed Mavericks so I'm pretty sure it's not the OS that has the problem. It runs slow even if only one app is open, especially if it's a browser, particulary google chrome. If mail is open...forget about it, down to a crawl. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)
P.S. - Also, it sounds like something is loose inside my mac. How should I proceed?
Thanks in advance.
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.8 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 23:21:37
Disk Information:
          APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 749.3 GB (603.2 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [not loaded] com.leapfrog.driver.LfConnectDriver (1.8.0 - SDK 10.7) Support
          [not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
          [not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
Problem System Launch Daemons:
          [failed] com.apple.wdhelper.plist
Problem System Launch Agents:
          [loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.leapfrog.connect.shell.plist Support
          [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [running] com.sophos.autoupdate.plist Support
          [running] com.sophos.intercheck.plist Support
          [running] com.sophos.notification.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.google.keystone.agent.plist Support
          [running] com.seagate.SeagateStorageGauge.plist Support
          [running] com.sophos.uiserver.plist Support
          [running] org.chromium.chromoting.plist Support
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.ARM.[...].plist Support
          [failed] com.adobe.ARM.[...].plist Support
          [loaded] com.facebook.videochat.[redacted].plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
          Activity Monitor
          Dropbox
          Google Drive
          younity
          EvernoteHelper
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.2.4.18058 Support
          nplastpass: Version: 2.5.5 Support
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
          FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
          Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 5.2.4.18058 Support
          SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
          Slick Savings: Version: 1.0
          Slick Savings: Version: 1.0
          Surfon: Version: 1.2.2
          Pearltrees Extension: Version: 6.0.13
          Mindomo Bookmarks: Version: 1.0
          Ebay Shopping Assistant: Version: 1.1
          Zootool: Version: 0.7
          Amazon Shopping Assistant: Version: 1.1
          Pocket: Version: 1.7.1
          Searchme: Version: 1.3
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
          TuneUp Visualizer: Version: 2.4.0 - SDK 10.6 Support
User Internet Plug-ins:
          Picasa: Version: 1.0 - SDK 10.4 Support
3rd Party Preference Panes:
          remoting_host_prefpane Support
          Flash Player Support
          Paragon NTFS for Mac ® OS X Support
Time Machine:
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 697.84 GB Disk used: 136.06 GB
          Destinations:
                    NO NAME [Local] (Last used)
                    Total size: 3.41 GB
                    Total number of backups: (null)
                    Size of backup disk: Too small
                              Backup size 3.41 GB < (Disk used 136.06 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               6%          Activity Monitor
               5%          WindowServer
               1%          InterCheck
               1%          sysmond
               0%          ocspd
Top Processes by Memory:
          152 MB          Finder
          115 MB          HelpViewer
          111 MB          mds_stores
          86 MB          InterCheck
          57 MB          WindowServer
Virtual Memory Information:
          983 MB          Free RAM
          1.03 GB          Active RAM
          584 MB          Inactive RAM
          1.01 GB          Wired RAM
          17.41 GB          Page-ins
          222 MB          Page-outs

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How to get the input details on the output screen in T code KCR0

Hi All,
How to get the input details on the output screen in T code KCR0, the issue is that we need to get the input details like Company code and payment date on the output screen while executing the report painter via t code KCR0.
I tried to chane the settings via t code KCR6 but still didn't get the required output details.
Regards,
Ajay

This is the asset accounting forum. You should post your question in the proper forum.

HT2589 Could you show me the full account information (account information)? How can I get the detail information that who charge me?

Could you show me the full account information (account information)? How can I get the detail information that who charge me?

I'm not entirely sure what you are asking, but you can view the purchase history on your account (and view your payment method) on your computer's iTunes : if you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases. On your iPad you can only see a cut-down version via this page (which also allows you to contact iTunes Support if you have a problem with a purchase) : http://reportaproblem.apple.com
There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
Or do you mean something else ?

What is S.M.A.R.T. and how to read S.M.A.R.T. attributes

Read the bottom for updated information/amendments
Hi everyone,
S.M.A.R.T. is Self-Monitoring, Analysis and Reporting Technology.
[size=15]1. S.M.A.R.T. info websites[/size]
OK, now we all know what S.M.A.R.T. stands for. For more details about S.M.A.R.T., here is a comprehensive non-technical explanation about S.M.A.R.T. by pcguide.com. Maxtor has published a white paper on S.M.A.R.T. too. And this is from Seagate. Anyhow, I am not going to discuss whether S.M.A.R.T will protect your harddisk from failure, etc etc here. Let us focus more on S.M.A.R.T. itself.
[size=15]2. S.M.A.R.T. monitoring tools[/size]
S.M.A.R.T. data is stored as a tabulated data somewhere in the harddisk as registers. The tools below support reading these registers value from S.M.A.R.T. enabled harddisk.
1. SpeedFan *sign-up is required for download, but it's FREE
2. Active SMART
3. Sisoftware SANDRA 2002.6.8.97 SP1 , older version doesn't support
[size=15]3. S.M.A.R.T. Tabulated Information[/size]
Here is a screenshot captured with SpeedFan.
Let us go through the screenshot. As can be seen, there are 5 columns - Attribute, Value, Worst, Warn and Raw.
Attribute
describes the meaning of the values. As mentioned above, the SMART data is stored as a tabulated data as registers. Each attribute represents one register ID. eg Raw Read Error Rate is register ID 01, register ID 03 is Spin-up Time, etc.
Note that the register IDs are not displayed by SpeedFan, but are displayed by other SANDRA and Active SMART. I have no idea how many S.M.A.R.T. attributes are there, Active SMART stated it can detect more than 35 attributes!
However, some attributes are manufacturer specific. So possibly some attribute names as shown in these SMART tools might not represent the true meaning of the values too!!
Value
is the current relative value of the attribute read from the registers.
Worst
is the worst value ever achieved.
Warn
is the critical threshold value of the attribute. If the Value has reached and OVER this threshold value, with very high probability the harddisk is in trouble. If SMART is enabled in the BIOS, SMART will alert user in the POST screen, with some manufacturer specific error code. You may need to refer to your manufacturer then.
Note : Value, Worst and Warn are all relative values, such as percentage, not actual count. I have no idea how to calculate these values. This is the very S.M.A.R.T. algorithm, isn't it? ?(
Raw
is in fact, the most understandable represented value here! It represents the actual count of the attribute. SpeedFan displays this raw value as hexadecimal numbers. Such as Power On Hours Count is "AA8", which is 2728 in decimal numbers, meaning that the harddisk has been power on for 2728 hours!! There are some Raws represent average rate, such as "CRC Error Rate" etc.
[size=15]4. S.M.A.R.T. Attributes In Detail[/size]
Hopefully by now, you have the basic idea how to read the tabulated data. I will try my best to go through the attributes one-by-one, which after that shall make you understand more about S.M.A.R.T. and of course, starts to appreciate it.
Raw Read Error Rate represents the condition of the physical disk, based on raw (physical) read errors, and physical surface defects.
Spin Up Time is the time taken for the hdd to spin-up. more info
Start/Stop Count is the number of counts (cycles) the hdd start/stop. more info
Reallocated Sector Count - the number of sectors have been reallocated. Surface scan and found bad sector will increase this count. Now this drive has 7 bad sectors already!
Seek Error Rate - how often the drive failed to locate the data (seeking)
Power On Hours Count - the number of hours you have powered on the HDD.
Spin Retry Count - how many time your drive need to attempt to get the drive platter spinning. If this value is more than 1, your drive is seriously in very bad condition!
Calibration Retry Count - represents the number of time your drive perform calibration retry. I am not sure if low-level format would increase this value.
Power Cycle CountThe number of time the hdd has been powered on. On and Off = 1 cycle.
Read Soft Error Rate - should be Soft Read Error Rate. Similar to Raw Read Error Rate but this one depends on logical level, such as error occured in the hdd buffer, etc.
Temperature - The drive temperature, Forget the relative values, read from the Raw value -- "2D" in this example, which is 45C. But my SpeedFan displayed 47C at that time!! SpeedFan seems to produce some +-2C error from actual reading once in a while. :P
Hardware ECC Recovered is the number of counts ECC correction is performed on the data.
Reallocated Event Count - similar to Reallocated Sector Count but this one is on the data.
Current Pending Sector - is the number of counts how many sectors are currently pending. But what is a pending sector?? ?( ?(
Offline Correctable - which is Off-line Scan Uncorrectable Sector Count. Again, what is off-line scan?
UltraATA CRC Error Rate - which is in fact, CRC Error Count instead of rate. As shown, there have been "3C3", which is 883 errors occured already!!!
There are more S.M.A.R.T. attributes, such as
Thoroughput Performance - again, this relative value is surely got from some wierd algorithm again.
Seek Time Performance - some algorithm has been used to calculate this performance value.
Power Off Retract and Load Cycle Count are IBM HDD specific features -- unload the head off the platters when power off. More info on Head Load/unload cycle.
[size=15]5. SpeedFan S.M.A.R.T. Fitness and Performance bars[/size]
I should not comment on this too much because this is Almico's work. I am not sure how he calculate to define the "fitness" and "performance" though. It could probably based on mathematic relation between the current Values and the threshold Warns.
For most hdds, like Maxtor and Seagate's, out-of-the-box the fitness bar has already reaching half-way 50%. But for IBM hdd, the fitness bar is always around 100%. This is because IBM hdd has its threshold/Warn values set to unrealistically high until it's quite unreachable even after a long term use. While for other brand HDDs, the threshold values are more realistic. Thus, the fitness bar in particular, does not tell the true fitness of the HDD. Take it as a reference only. Please always refer back to the Raw values to determine the fitness.
[size=15]6. Conclusion : Judging HDD fitness by our own selves![/size]
Now we all know what the Attributes are, so roughly everyone will have the basic idea how to judge HDD health by our own selves depend on the attributes you're reading. S.M.A.R.T. itself however, define "fitness" and "performance" based on its own algorithm.
We can categorize the attributes into :
Error Related Attributes
"UltraATA CRC Error Rate", "Raw Read Error Rate", "Raw Soft Error Rate", "Hardware ECC Recovered Count", "Reallocated Sector Count", "Reallocated Event/Data Count", Offline Correctable"
-- tell how often are those errors occured. For the above example, this Maxtor harddisk should be RMA-ed for its high CRC Error Rate count.
Drive Fitness Attributes
Spin Up Time, Start/Stop Count, Seek Error Rate, Power On Hours Count, Spin Retry Count, Calibration Retry Count, Power Cycle Count, Power Off Retract Count, Load Cycle Count
-- check "spin retry count" and "Seek Error Rate", any value other than zero is really bad.
Other Attributes
I have no idea what they are for except Temperature.
As the conclusion, understanding S.M.A.R.T. attributes helps in knowing your HDD fitness by your own self, rather than waiting for the S.M.A.R.T. to alert you for severe error. That might be too late already. 8o
Thanks for reading.
Edited:
1. for better reading pleasure
2. added Conclusion
3. added explanations about SpeedFan SMART Fitness and Performance bar.

Quote
Originally posted by WarLord
I like this HD tool. i use it everyday now. the tempture readings are great Hd temp cpu temp and even the system temp nice added feature to the monitoring. And this is an alternative to enabling the SMART in the bios? Thats the way im understanding it. is that right Maesus ?Because i have disabled in bios. She went threw alot of trouble here. thank you
Well from my observation, whether SMART is disabled or enabled in the BIOS, SMART is always working within the HDD itself.
Basically SMART is acting like a blackbox, monitoring and tabulating HDD condition from time to time and its attributes only fully revealable by the manufacturers. SpeedFan's SMART status only displays partial information that is displayable. Some attributes are hidden, ~OR~ the attributes' locations are different from one HDD to another brand, such that some values don't correspond to the attribute meaning at all.
It is very doubtful to claim that enabling SMART in the BIOS will hog down the performance. Just like a transport bus (yeah real bus that fetch passenger :P ), with or without the black box installed can't help it if the driver wants to speeding. :P

How do I transfer my details from one iMac to another

How do I transfer my details from one imac to a new one

By following the directions in the following: Setting-up a new Mac from an old one, its Backups, or a PC

How to remove credit card details from iPad 4. So I can download free apps from apps store??

Please someone tell me how to remove credit card details from iPad 4, so I download free apps from App Store??

None for payment
After establishing the Credit Card account, you can remove the credit card information by editing your payment info, choosing "None".
Note: You won't find "None" if you have not purchase anything with the Credit Card.

How do I see a detailed view of what's on my hard drive and how much space it's consuming?

I have an early 2007 iMac (3GB RAM) and a 320 GB hard drive. I'm trying to clear some of the programs and files I don't need to free up space, but I'm not sure how to get a similar look at my files and how much space they take up individually (as I would with a PC). Under system info I'm able to get the high-level overview, but how do I see a detailed view that I can then edit?

Thanks for your help. I did just that and was able to get a much better view with OmniDiskSweeper. I was shocked to find that my MobileSync files were 125 GB of about 270 being used! Guess I shouldn't be surprised with 4 iPhones and 4 iPads syncing to the same iMac at one time or another -- just kind of surprised Apple/iTunes doesn't make it any clearer that this can turn into a big problem if you don't initially create the appropriate backup settings for your devices. Thanks again!

How can I get a detail block to requery after a database change?

Hi, I have a master/detail form. When the status of the master record changes, I need to update a date in one of the detail records. If I use SQL to update the detail row in the database in the ON-CHANGE trigger of the master block, how can I get the detail block to requery to show the change? When I try doing a go_block from any of the ...UPDATE triggers, it says it is restricted.

wjpenfold,
Do you have a "Relationship" defined between your Master and Detail blocks? If so, you simply need to requery your master block and the detail block will automatically be requeried. If you can't use a relationship, then you can use can create a timer in the trigger that updates the database and then in the When-Timer-Expired (WTE) trigger you can go to the detail block and execute a query. For example:
/* Sample On-Change trigger */
DECLARE
   timer_id TIMER;
BEGIN
....your code here that performs the update....
   /* Now create an instance of a timer */
   timer_id := Create_Timer ('upd_detail',1,NO_REPEAT);
END;
/* Sample Form Level When-Timer-Expired trigger */
DECLARE
   timer_id   TIMER;
BEGIN
   -- Find the timer first
   timer_id := FIND_TIMER('upd_detail');
   IF NOT ID_NULL(timer_id) THEN
      GO_BLOCK('DETAIL_BLOCK');
      Execute_Query;
   END IF;
END;Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How can i see a detailed call log

how can i see a detailed call log including actual numbers on restricted calls

bobsouthernguy wrote:
how can i see a detailed call log including actual numbers on restricted calls
You won't see the numbers if the call came in as restricted...that's the point of a caller blocking their number.
You can pay for a service like TrapCall that will give you the restricted numbers. Or you can use a service (free) like DitchMail that gives callers a recording asking them to unblock their number and call back, if the call comes in with the number blocked. It then hangs up without giving them the opportunity to leave a message.

How to read context node/attribute data of diff UI component of same screen

Hi,
I am new to CRM and as well as BSP, Now the requirement is, at the time of Lead creation, when the end user enters customer code and sales area i need to fetch and display the customer group 1 value( VIP,KAM etc) based on the customer's sales area, ( these are sales area specific values).
but the problem is Customer code is in diff UI component and sales area data is in diff UI component .
1) customer code attribute is in UI component BT108H_LEA, View BT108H_LEA\Detail, Context node is BTPARTNERPROSPECT.
2) sales area fields are in the UI component BTORGSET, View BTORGSET\OrgSetData, Context node is BTORGSET.
3) I have created new field(customer type to display the customer group 1 value "VIP") in UI component BT108H_LEA, View BT108H_LEA\Detail, Context node is BTLEADH.
To display the value in the context node BTLEADH, i need to know the sales area data which is entered in BTORGSET.
Kindly let me know how to read the data which is in diff UI component of the same Lead creation screen.
i written following code in context node BTLEADH, atttribute New Zfield, in get method, but not able solve, please guide me.
DATA: LR_ENT TYPE REF TO CL_CRM_BOL_ENTITY,
             LR_COL TYPE REF TO IF_BOL_ENTITY_COL.
LR_ENT ?= ME->TYPED_CONTEXT->BuilHeader->COLLECTION_WRAPPER->GET_CURRENT( ).
LR_COL = LR_ENT->GET_RELATED_ENTITIES( IV_RELATION_NAME = 'BuilSalesArrangementRel' ).
LR_ENT ?= LR_COL->GET_FIRST( ).
IF LR_ENT IS BOUND.
    LR_ENT->GET_PROPERTY_AS_VALUE( EXPORTING IV_ATTR_NAME = 'DIVISION' IMPORTING EV_RESULT = LV_DIVISION ).
ENDIF.
I'll appreciate if you can provide me some documents to refer.
awaiting for your responses.
Thanks
Bhanu

Hi Gangadhar,
I think i have not clearly explained my requirement, let me put it once again. My requirement is, I have to read two UI component data, validate and display some value in one new zfield which is in one of the UI components.
I need to display customer's sales area specific data like customer group 1 value in that new zfield. for that i need Customer code and as well as sales area data from the screen.
1) customer code attribute is in UI component BT108H_LEA, View BT108H_LEA\Detail, Context node is BTPARTNERPROSPECT.
2) sales area fields are in the UI component BTORGSET, View BTORGSET\OrgSetData, Context node is BTORGSET.
3) I have created new field(customer type to display the customer group 1 value "VIP") in UI component BT108H_LEA, View BT108H_LEA\Detail, Context node is BTLEADH.
As per my understanding, in the context node BTLEADH, GET_METHOD of atttribute New Zfield, i have to read customer code from UI component BT108H_LEA, View BT108H_LEA\Detail, Context node is BTPARTNERPROSPECT and Sales area data from UI component BTORGSET, View BTORGSET\OrgSetData, Context node is BTORGSET based on the values, validate and display the data.
But as per your recent reply you are asking me to write the code in get_property_attribute---division. so i didnt understand.
Kindly clarify if i am wrong.
awaiting for your response.
Thanks
BHanu

Adobe premiere elements 12 - how to create menu bar action for my inserted image button

adobe premiere elements 12 - how to create menu bar action for my inserted image button without using their movie menu theme

forbemag
I do not think that I am completely focused into this completely, so let us see if the following is going to help.
You are going to need a base for your button. When you mention "image" button, I am assuming that you are using that term to differentiate between a text button and a thumbnail type button.
The menus (main and scene) take their origin in .psd files on the hard drive and strict nomenclature and structure for Layers Palatte. And, the buttons on the menus trace back to the menu markers on the Timeline, main menu marker and order of placement of scene markers. The scene thumbnail will only appear when there is a scene marker on the Timeline to which it.
In view of all that
Where have you already inserted this "image (button)"...into the Layers Palette of a Photoshop document or other? Is this "image (button)" in a structured Layer Group in the Layers Palette with sublayer groups, text layers, graphic/background layer"?
Let me give you an example
If you have a button (with thumbnail) on the main menu and you want that to open to a specific scene in your movie, then you use a main menu marker on the Timeline at the spot that you want that button to target.
If I am getting closer to what you seek, then please further clarify the DVD navigational envisioned scheme.
Thanks.
ATR
Add On...I did not see the exchanges between us and SG until after I had posted mine. I thought that your discussions were concluded. Please excuse the interruption.

How to read menu painter detail

Similar Messages

Maybe you are looking for