How to read movieClip container variables by attachmovie

I used a movieClip to store the attach movieclip, but How to get back the variable from that movieClip container,
such as a I set a array in the exiting movieClip
var m_click:Array = new Array();
for (var f=0; f<=this[mc_name+"_qty"]._totalframes-1; f++)
{ m_click[f] = 0; }
I want the attached movieClip "y_qty" with a button inside to get the m_click for changing each m_click[0]..m_click[1]..value, how to do it?
Thanks

As I want to build a supermarket interface with number of 2x3 or 2x2 cells in every shelf,
I prepare at least more than 6 items in 1 mc for attachmovie randomly in each cell.
On the other hand, I need to attachmovie of  the selected items in a shopping cart list with quantity information, and
removed it in cart list when click until tthe quantity is zero.
So, I added a button inside the attachmovie to count and store the times on each frame click and currentframe no with items id in array.
Now is much trouble to store array item_id[n] without repeat, if repeat, add to item_qty[n]++

Similar Messages

  • How to Read EJB container

    Hi,
    How to read the the EJB container for getting the information about each and every ejb?,
    I need to get the local and remote interface name for that ejb .

    I think the application server administrator console will provide you information about deployed EJB's
    -Lave

  • How to read Filter selection variable values into ABAP code

    HI IP Gurus,
    Requierement: In my filter characterstics, i have assigned variables, which use will enter when running th e planning sequence.
    so  variable values entered by user , i would like to get those values into ABAP code and pass them to some function module.
    SO please give me step by step detail how to achive this.
    MY understanding use the below method . but not sure how to proceed.Please let me know abap code to get values.
    GET_TAB_PARAM_DATA_SEL and GET_PARAM_DATA_SEL.
    Please help me.
    Thanks in advance.Will Assign points
    Sania

    Hi Srinivas,
    So In RSPLF1 , in paramters tab, Do i have create structure(str1) and then create component Data selection (Dtsel1) under str1(what setting i have to do here, where should i enter variable value and do i need to give info object name and how do it in code.i tried to following example, not able to get any values in tab_sel .
    It will be great, if you could explain in detail.
    other thing i found out is in Initialization method i can read i_t_data_charsel table values , where it contains filter slected values.but could not pass  these values to execute method
    Is there is any way that i can pass values from init method to execute method.
    A tabular structured parameter with name "MY_TABSTRUC" is defined for the function type. "MY_TABSTRUC" consists of the two parameter components "MY_ELEM" and "MY_DATASEL". You access the parameter values as follows:
    DATA: TAB_PARAM_STRUC TYPE RSPLFA_T_PARAM_STRUC,
           REF_PARAM_STRUC    TYPE REF TO IF_RSPLFA_PARAM_STRUC,
          REF_PARAM_ELEM     TYPE REF TO IF_RSPLFA_PARAM_ELEM,
          REF_PARAM_DATASEL  TYPE REF TO IF_RSPLFA_PARAM_DATESEL,
           L_VAL(20)          TYPE C,
           TAB_SEL            TYPE RSPLF_T_CHARSEL.
    get table of parameter MY_TABSTRUC:
      TAB_PARAM_STRUC = I_R_PARAM_SET->GET_TAB_PARAM_STRUC( 'MY_TABSTRUC' ).
    process all lines:
      LOOP AT TAB_PARAM_STRUC into REF_PARAM_STRUC.
      get component MY_ELEM:
        REF_PARAM_ELEM = REF_PARAM_STRUC->GET_COMP_ELEM( 'MY_ELEM' ).
      get internal value of MY_ELEM:
        REF_PARAM_ELEM->GET_VALUE( IMPORTING E_VALUE = L_VAL ).
      get component MY_DATASEL:
        REF_PARAM_DATASEL = REF_PARAM_STRUC->GET_COMP_DATA_SEL( 'MY_DATASEL' ).
      get data selection table of MY_DATASEL:
        TAB_SEL = REF_PARAM_DATASEL->GET_T_SEL( ).
      ENDLOOP.
    Thanks in Advance..please help me

  • How to read container variable in UDF

    Hello expert,
    I have created a container variable(var_callerId) in an integrationprocess.
    In a mapping I want to read the container variable with an UDF.
    Can anyone send me the code for the UDF please ?
    I can't find the solution in any post message / blog.
    Thx for your help!
    Best regards,
    Juergen

    Hi navneet,
    thanks for your fast reply.
    Let me explain why I wanted to use container variables:
    (Perhaps there is a better way to fix the requirement)
    I've following IP
    Message Interface (input)
    <getData>
    <callerInfo>
    <callerID>SYSA</callerID>
    <SessionID>43545455545355</SessionID>
    <number>3434344334</number>
    </callerInfo>
    </getData>
    Then I have a mapping (<number>) to call a webservice.
    I get the data from the webservice.
    At last I will send the data back to the business System.
    But I need the both tags from the input interface (SessionID, callerID) again, to send it back.
    I tried a mapping  to map sessionID and callerID from the input interface  to the output interface, but it doesn't work.
    So I thought I can store the sessionID and callerID in a container variable and in a mapping I will get it back with an UDF.
    I think there should be a possiblility to get the stored value from the container variable inside the IP. But I don't find any solution.
    I don't understand your solution with the global container. How can I access to the container variable(IP).
    Thx for your help
    Best regards
    Juergen

  • Container Variables

    How to read the Container Varaibles or a Message Interface variable when BPM fails for example in Message Mapping for instance?
    Thanks

    Mohini,
    The container elements in the BPM can be accesed in any step of the BPM as long as they have been initialized.
    In your case, if your Mapping has an error, wrap the Transfromation step within a block and in the exception handling step, you will be able to use the Container variables defined and initialized before the exception occured including the source message to the mapping. Just use this Container element in any step including a Send Step.
    is this what you are looking at?
    Regards,
    Bhavesh

  • How to read the multipart/realted mime type message.

    hello, sir
    please tell me,
    how to read the multipart/realted message.
    which are the subpart are included in the "multipart/related" message
    i know only "multipart/mixed" and i know how to read ,it contain the subpart ,
    1)text / plain
    2)text / html
    3)multipart/alternative
    a)text / plain
    but i don't know which are the subpart included in the "multipart/related " please tell me.
    thanks

    Today we rely on Simulink to perform parameterization of your designs in two ways:
    Parameterizable Subsystems and Blocks : Parameters themselves can be MATLAB expressions that need to be evaluated for which we need the MATLAB interpreter
    The very useful Rate and Type propagation or Simulink compilation that allows us to specify types & rates in one location that gets systematically propagated to all.
    To truly make the HDL Netlist that is generated from SysGen parameterizable, we would have to implement some of this capability in the HDL netlist itself by:
    Using Generics(VHDL) or Parameters(Verilog) - We would have to capture the bit width(type) propagation through levels of hierarchies and finally parameterize the IP itself based on this value
    Since IP itself does not have this capability through generics, we would have to package a separate tcl script that updates the IP parameterization appropriately in response to top level parameters(or GUI parameters)
    Interpreting MATLAB expressions and translating them into VHDL/Verilog expressions (alternatively tcl expressions of IP). In simulink, mask parameters can be passed from one level to the next. Also parameterization of a block can be composed of Matlab expressions using variables from ancestor masks & the MATLAB interpreter – so we will need to somehow capture that as well.
     

  • How to read a whole text file into a pl/sql variable?

    Hi, I need to read an entire text file--which actually contains an email message extracted from a content management system-- into a variable in a pl/sql package, so I can insert some information from the database and then send the email. I want to read the whole text file in one shot, not just one line at a time. Shoud I use Utl_File.Get_Raw or is there another more appropriate way to do this?

    how to read a whole text file into a pl/sql variable?
    your_clob_variable := dbms_xslprocessor.read2clob('YOUR_DIRECTORY','YOUR_FILE');
    ....

  • How to Access a BPM container variable in XI graphical  message mapping

    Hello XI BPM and Mapping experts,
    is it possible to access a BPM container variable from an graphical mapping?
    If yes, how ?
    We need this for the following scenario:
    IDOC to BPM.
    BPM  transforms and sends transformed IDOC to fileadapter
    If both steps are successful  a STATUS.SYSTAT01 IDOC should be send back to SAP-ISU with status 06.
    If one of these steps fails  the status in the SYSTAT01 should be set to 05. (Exception branch of block)
    We want to avoid to write 2 mapping programs for mapping the SYSTAT01.
    Instead we would like to use a BPM Container Variable which contains the status.
    In the mapping for the SYSTAT01 we want to use this Container Variable.
    Is this possible?
    Thanks for soon answers.
    Regards Marlies

    Hi Marlies,
       Is not possible to acces a BPM container variable from graphical mapping. For other hand, you can to use runtime variables for this purpose.
       You could create an abstract interface with a message type having a single node with the required value and using this message in other mapping.
    Best regards
    Ivá

  • How to Read Variable Values in WAD 7.0 Using JavaScript

    I found a how to: How to Read Variable Values in WAD 7.0 Using JavaScript on SDN.
    I get a Javascript error:
    bics.getElementsByTagName is not a function
    vars = bics.getElementsByTagName("VARIABLES")[0]; // <VARIABLES>
    Thats my script:
    function currency()
    var varnm = "SFS_CP_CURR"; // Name of the variable to be read
    root = document.childNodes[0]; // <HTML>
    body = root.getElementsByTagName("BODY")[0]; // <BODY>
    xml = body.getElementsByTagName("XML")[0]; // <XML>
    bics = xml.childNodes[0]; // <BICS_VIEW>
    vars = bics.getElementsByTagName("VARIABLES")[0]; // <VARIABLES>
    varl = vars.getElementsByTagName("VARIABLE"); // gives no. of variable in DP
    for ( i = 0; i <= varl.length; i++ ) // Loop one by one
    vari = vars.getElementsByTagName("VARIABLE")<i>;
    varnam = vari.attributes[0].text; // get variable name
    mem = vari.getElementsByTagName("MEMBER")[0];
    varval = mem.attributes.getNamedItem("name").value; // read variable value
    if (varnam == varnm) //check varname in loop needs to be read
    if (varval == "ZMON") // check for value1 and fire command1
    SFS_CP_M();
    if (varval == "ZKON") // check for value2 and fire command2
    SFS_CP_K();
    break;
    Where's the mistake?

    I'm afraid I haven't made my question understood clearly.
    What I am looking for is a method to get the value of variable inside excel (e.g. put it into a cell / range of a worksheet, so that we can reference it and use it as an input for planning function execution).
    Please advice.
    Thanks in advance,
    Shady

  • How to use a global variable for reading a query resultset in JDBC lookup?

    Hi Friends,
    Using JDBC lookup, I am trying to read from a table Emp1 using a user defined function. In PI 7.0, this function returns values of a single column only even if you fire a " Select * " query. I am planning to use a global variable(array) that stores individual column values of the records returned by a "select *" query. Need pointers on as to how a global variable can be declared and used to acheive the above scenario. Kindly explain with an example. Any help would be appreciated.
    Thanks,
    Amit.

    Hi Amit,
    Sounds like a good idea but then you would need an external db and update the table in a thread safe way !.
    Regarding your question as to how to work with global variable please refer https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1352. [original link is broken] [original link is broken] [original link is broken]
    Rgds
    joel

  • How to load file thru reader which contains non-english char in file name

    Hi ,
    I want to know how to load file in english machine thru reader which contains non-english chars in file names (eg. 置顶.pdf)
    as LoadFile gives error while passing unicode converted file name.
    Regards,
    Arvind

    You don't mention what version of Reader?  And you are using the AcroPDF.dll, yes?
    Sent from my iPad

  • How to read a file containing bitmap message in binary format

    Dear all,
    Can anybody tell me how to read bitmap message which stored data in binary format? The messages are stores like this :
    A file contain some messages along with these bitmaps in square zeroes.
    I want to again convert it into ASCII.

    Double post: http://forum.java.sun.com/thread.jspa?threadID=587497

  • How to read variable in CMOD code !

    Experts,
    in my one of the query, there is a variable, which takes 2 dates. so the variable is type "interval"
    so, when you run the report, user needs to enter value something like this.."mm/dd/yyyy  - mm/dd/yyyy"
    Now, i have writtn a code in CMOD, by reading this variable.
    But i dont know how to read 2nd date from the variable.
    READ TABLE   i_t_var_range
                 WITH KEY   vnam = 'VARIABLE'
                 INTO       l_var_range.
              First Date = l_var_range-low.
              Second Date = l_var_range-high.
    Does this low and high thing is correct?
    if i do debug, i could see the low values. but i coud see the same low values in High too.
    whats the problem ?
    please help

    Hi ,
    There are some scenarios for using CMOD, for variables in report.
    And as per I understand for you issue, please find my comments
    Scenario : You want to use the values enter by user in some other variable in the same report.
    Please make sure that properties of both the variables are same.
    Use below code:
    DATA: l_s_range TYPE rsr_s_rangesid.
    DATA: loc_var_range LIKE rrrangeexit.
       WHEN 'New Variale'.
            IF i_step = 2.
              LOOP AT i_t_var_range INTO loc_var_range
                      WHERE vnam = 'Varaible in which user has entered value'.
                CLEAR l_s_range.
                l_s_range-low  =   loc_var_range-low  .
                l_s_range-high =   loc_var_range-high .
                APPEND l_s_range TO e_t_range.
              ENDLOOP.
            ENDIF.
    Thanks
    Mayank
    Edited by: Mayank Chauhan on Feb 8, 2011 11:45 AM
    Edited by: Mayank Chauhan on Feb 8, 2011 11:46 AM
    Edited by: Mayank Chauhan on Feb 8, 2011 11:47 AM

  • How to read a table/structure value in a container from a Z program

    Experts,
    I have a WF with one of the container element is a multiline table element of the strucuture BSEG. Now I have a report where given a WID, i need to read the contents of this structure from the workflow container and display in ALV grid.
    I'm using the FM SAP_WAPI_READ_CONTAINER or SWW_WI_CONTAINER_READ to read the container. No issues till here now.
    I'm able to read the contents of the attributes that are simple without being in a structure/table.
    But, how do i read the values from the table/structure in the container from this FM?
    I see lots of threads talking about SWC_GET_TABLE or something like that. But I don't know whether and how to use it in my scenario. Any sample programs will be greatly appreciated.
    Thanks,
    Sam

    Hey,
    No issues. I sorted out myself. Glory to God in the Heavens!
    -Sam

  • How to read a string from file & assign the val to a variable in batch file

    Hi,
    How to read a string from a file and assign the value to a variable then return the value to the screen in windows batch file?
    Any suggestions?
    thanks.

    Unless this is a homework question then I don't see the purpose of doing this, but....
    You should be looking a the supplied package utl_file to get the string out of the file, dbms_output to display the string and then google windows batch/command files calling sqlplus to execute your program.
    Andre

Maybe you are looking for