How to read multiple voltages from DAQ at same time?
Hello all,
I am attempting to read multiple voltage inputs to my USB-6008 DAQ but when I try to read a second voltage, I get an error saying "Erorr 50103 the resource is reserved." Someone in another thread said:
"The reserved resource is your DAQ board. You should not be using two separate simultaneous tasks for the same DAQ board. You should use a single task with two channels configured."
So I made multiple channels in one task, but I don't want to read all the channels at once. Is there a way to specify which channel of the task to read? Or is it not possible to acquire multiple voltages from the DAQ at all?
So the question boils down to: if you have 3 different voltage inputs into your DAQ, all corresponding to different components, is there a way to be tracking and reading all of them at the same time?
Thanks a lot
shahidi124 wrote:
Hello all,
I am attempting to read multiple voltage inputs to my USB-6008 DAQ but when I try to read a second voltage, I get an error saying "Erorr 50103 the resource is reserved." Someone in another thread said:
"The reserved resource is your DAQ board. You should not be using two separate simultaneous tasks for the same DAQ board. You should use a single task with two channels configured."
So I made multiple channels in one task, but I don't want to read all the channels at once. Is there a way to specify which channel of the task to read? Or is it not possible to acquire multiple voltages from the DAQ at all?
So the question boils down to: if you have 3 different voltage inputs into your DAQ, all corresponding to different components, is there a way to be tracking and reading all of them at the same time?
Thanks a lot
I don't understand your question. You made a task to read all the channels at once, but you do not want to read all the channels at once? And you want to track and read all the channels at the same time?
You need to explain it a little bit better and add some code of what you have done so far. A task will read all the channels in the task and give you the results so you can track them. So I am confused.
Similar Messages
-
How to read multiple documents from a system directory?
Hi,
I'm trying to read multiple documents from a specific folder that contains pdfs, jpgs... the only activity I found is the Read Document, but this activity does not have the option to read all docs under my folder!.
so any one can tell me if there is another activity can do it or is there any good solution to loop on the folder and read all the docs? any script will be helpful.
Thanks
HussamHi,
After many hours of searching and readings, I found a solution, I do not know if it is the best, but anyhow this is my solution:
By using a service operation called "Find" from a service named "FileUtilsService", this operation will return a list of strings with the names of all files and/or directories under the path you want.
Then by using the "Read Document" I was able to get one file and store it in a dcoumnet variable, and by using a simple looping technique I got all the files I want.
hope this will help others
Hussam -
How to prevent multiple users from updating the same data in coherence
Hi,
I have a Java Web Application and for data cache am using coherence 3.5. The same data maybe shared by multiple users which maybe in hundreds. Now how do I prevent multiple users from updating the same data in coherence i.e. is there something in coherence that will only allow one user a time to update. If one user is in a process of updating a data in coherence and some other user also tries to update then the second user should get an error.
ThanksI have a question on the same line. How can I restrict someone from updating a cache value when I a process is already working on it. I tried locking the cache key but it does not stop other process to update it , it only does not allow other process to get lock on it.
-
How to open multiple hotmail accounts at the same time ?
Hi,
Seems maybe normal for some people but I coming from internet explorer and with this explorer I was able to open multiple hotmail accounts at the same time, by default firefox can't do that, is there some setup to modify to open these at the same time ?
Thanks in advance for any help.
(Version updated 3.6.8)
Regards,
ChrisYou can look at one of these if you want to sign on with different identities at the same time:
* CookiePie: http://www.nektra.com/oss/firefox/extensions/cookiepie/
* CookieSwap: https://addons.mozilla.org/firefox/addon/3255
* Multifox: http://br.mozdev.org/multifox/ - Different logins at the same time -
How to upload multiple .CSV files in the same time.
Hi Legends,
Can anyone please help me to resolve my issue?
This is very urgent and critical.
Description:
We have two users.1)edw_user_dump
2)prd_udm.
We need to upload the xx.csv file at the same time for these two users in oracle forms.
we have differentiated .csv file name based on the user names.
the main problem is in the sql loader command the xx.csv file name is created but the data is not captured in the server (kentucky) .
Below is my code for the upload.
-- To delete the Part_Mast.log file from the client
DECLARE
pid WEBUTIL_HOST.PROCESS_ID;
v_result PLS_INTEGER;
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
BEGIN
v_result := WEBUTIL_HOST.Get_return_Code(pid ) ;
host('cat /dev/null > /tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log');
host('cat /dev/null > /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
END;
DECLARE
l_success boolean:=FALSE;
l_bare_filename varchar2(100):=NULL;
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
BEGIN
-- Delete the content of the log and bad file
host('cat /dev/null > /tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log');
--host('cat /dev/null > /tmp/Part_Mast.bad');
-- Upload the data file to Application Server
l_bare_filename := v_username||'_'||substr(:FIC_SOURCE,instr(:FIC_SOURCE,'\',-1)+1);
l_success := webutil_file_transfer.Client_To_AS_with_progress
(clientFile => :FIC_SOURCE
,serverFile => '/tmp/'||l_bare_filename
,progressTitle => 'Upload to Application Server in progress'
,progressSubTitle => 'Please wait'
,asynchronous => false
,callbackTrigger => null
IF l_success THEN
NULL;
ELSE
null;
END IF;
EXCEPTION
WHEN OTHERS THEN
RAISE Form_Trigger_Failure;
END;
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
begin
host('cat /dev/null > /tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log');
host('cat /dev/null > /tmp/EDW_CF_IO_UPLOAD.bad');
end;
BEGIN
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
v_password varchar2(30) := GET_APPLICATION_PROPERTY(PASSWORD);
v_connect_string varchar2(30) := GET_APPLICATION_PROPERTY(CONNECT_STRING);
a_host varchar2(500);
BEGIN
a_host :='/tmp/'||v_username||'_'||'"CF615 IO Upload.csv"';
host('sqlldr '||v_username||'/'||v_password||'@'||v_connect_string||' '|| 'control=/home/edw_bis/ctl/GLB_CF_IO_UPLOAD.CTL'||' '|| 'DATA=a_host'||' '|| 'LOG=/tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log SKIP=1 errors=200000 DIRECT=FALSE');
dbms_output.put_line(a_host);
END;
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
begin
host('cat /dev/null > /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
EXCEPTION
WHEN OTHERS THEN
RAISE Form_Trigger_Failure;
END;
end;
DECLARE
al_id3 ALERT;
al_button Number;
BEGIN
edw_user_dump.SANM_PRC_MERGE_CF_IO_UPLOAD(:global.v_plsql_res,:global.v_ins_rec,:global.v_upd_rec);
IF NVL(:global.v_plsql_res,0) = 0 and (:global.v_ins_rec !=0 OR :global.v_upd_rec != 0 ) then
al_id3 :=FIND_ALERT('ROWINS');
SET_ALERT_PROPERTY(al_id3,alert_message_text,' Process Completed Successfully!'||CHR(10)||' Rows Inserted : '||:global.v_ins_rec ||CHR(10)||' Rows Updated : '||:global.v_upd_rec);
al_button := SHOW_ALERT( al_id3 );
ELSIF (:global.v_plsql_res IN(-1,0) or :global.v_plsql_res > 0) and (:global.v_ins_rec =0 and :global.v_upd_rec = 0 and :global.v_del_rec =0 ) then
al_id3 :=FIND_ALERT('ROWINS');
SET_ALERT_PROPERTY(al_id3,alert_message_text,' Process Failed. Please Download the Log File '||CHR(10)||' Rows Failed : '||:global.v_plsql_res||CHR(10)||' Rows Inserted : '||:global.v_ins_rec ||CHR(10)||' Rows Updated : '||:global.v_upd_rec);
al_button := SHOW_ALERT( al_id3 );
ELSE
al_id3 :=FIND_ALERT('ROWINS');
SET_ALERT_PROPERTY(al_id3,alert_message_text,'Please Download the Log File '||CHR(10)||' Rows Failed : '||:global.v_plsql_res||CHR(10)||' Rows Inserted : '||:global.v_ins_rec ||CHR(10)||' Rows Updated : '||:global.v_upd_rec );
al_button := SHOW_ALERT( al_id3 );
END IF;
EXCEPTION WHEN OTHERS THEN
RAISE Form_Trigger_Failure;
END;
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
begin
host('cat /dev/null > /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
host('rm -rf /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
end;
Thanks in advance!
Thanks,
MadhusudhananMadhusudhanan,
A couple of observations. First; always list your exact Forms version (eg; 10.1.2.0.2 not 10g R2). In most cases, the solution is different depending on the Forms version. Second; why must you use Forms to kick off a SQL Loader process? This is a server-side process and should be initiated by a server side process. If you absolutely must use Forms to kick off the process, again we need your Forms version in order to offer any solutions. Based on your code sample, I can asusme you are at least using Forms 9i becuase you are using WebUtil.
Is your Database and Application Server the same physical computer? If they are not, this would explain why your HOST command isn't working because HOST runs against the Application Server not the Database server.
Third; have you considered using and External Table (if your RDBMS version supports them) for each of the files you are attempting to upload? In this instance, it would be helpful to know your RDBMS version as well. External Tables can be a little frustrating to set up the first time, but as with any new construct you use - it gets easier the more you use it.
Fourth; are you getting any errors in your log file(s)? If so, what are the errors? Please list the full error message if you have one.
Finally, with respects to your statement:
Posted: Mar 18, 2011 2:30 PM - Madhu This is very urgent and critical.>
You have to understand that forum contributers are all volunteers - this is not our full-time job. If your issue is truely urgent I suggest you open a Service Request (SR) with Oracle Support! ;-)
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
How to read multiple lines from a command prompt?
I usually read from a command prompt like this:
String answer;
System.out.println("Please enter the required data");
try {
BufferedReader reader = new BufferedReader(new InputStreamReader(System.in));
answer = reader.readLine();
reader = null;
} catch (Exception e) {
System.out.println("There was an exception trying to read " + e);
answer = "";
This has worked fine for years when all I wanted was one line answers.
Now I am trying to prompt for multiple line answers. Is there a way to read into a string array rather than just a string? What class would I use for that?
Thanks a lot!The easiest approaches would be to read a line at a time until you've read enough lines, whether by a known fixed line count, or a token count, or by reading some sentinel toek, OR read a token at a time using Scanner.next() until you've determined you're done. Which one is more appropriate depends on your situation.
-
How to read multiple lines from an external file to the Oracle data base
Hi Guys,
I have an external file which contains multiple lines and I want to read it to the data base .I have done it for the file if it contains one line.
Please guide me how to retrieve all the lines into the data base.And also tell me how Oracle will come to know the end of the line in the file
Thanks,
PrafullaHi,
try this
CREATE TABLE ab
a VARCHAR2(1 BYTE),
b VARCHAR2(2 BYTE),
c VARCHAR2(10 BYTE),
d VARCHAR2(11 BYTE)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY dir_name
ACCESS PARAMETERS
( records delimited by newline
fields (
a POSITION(*) CHAR(1),
b POSITION(*) CHAR(2 ),
c POSITION(*) CHAR(10 ),
d POSITION(*) CHAR(11 )
LOCATION (dir_name:'filename.txt')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING;
Regards,
Simma.... -
HOW TO READ MULTIPLE FILES FROM DIRECTORY
i have a directory with 100 .sql insert scripts.i want to read all .sql files from directory and execute the insert script automatically.
Let's suppose you have 3 files: "first.sql", "second.sql" and "third.sql". Create a file named "all.sql" in the same directory, containing this:
@@first.sql
@@second.sql
@@third.sqlRun "all.sql". -
How to store multiple files from SAp in to Application server?
Hi Guys,
Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
Any Logic or Code for how to do is welcomed.
plz help me urgently.
Thanks,
GopiHi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
DIRNAME(200) TYPE c, " name of directory.
sp_name(100) TYPE c," name of entry. (may end with *)
END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
dirname(75) TYPE c, " name of directory.
aliass(75) TYPE c, " alias for directory.
svrname(75) TYPE c, " svr where directory is availabl
sp_name(75) TYPE c, " name of entry. (may end with *)
sp_cs(10) TYPE c, " ContainsString pattern for name
END OF isearchpoints.
data: l_file type filetable.
data: l_rc type i.
data: itab type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = in_file
"FILETYPE = 'BIN'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
TABLES
DATA_TAB = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
move g_tmp_file_path to in_file.
h_destin = ''.
SPLIT g_tmp_file_path at '\' into table itab.
loop at itab into g_tmp_file_path.
h_destin = g_tmp_file_path.
endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies TYPE TABLE OF dfies.
DATA: lwa_dfies TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = '/BI0/PCO_AREA'
lfieldname = 'CO_AREA'
IMPORTING
dfies_wa = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT = 'Destination directory'.
lwa_dfies-LENG = 100.
lwa_dfies-INTLEN = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'SP_NAME'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'destin'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = searchpoints
FIELD_TAB = lt_dfies
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
*& Form select_input_file_name
* text
form select_input_file_name.
* call function 'F4_FILENAME'
* exporting
* program_name = sy-repid
* dynpro_number = sy-dynnr
* field_name = 'PATH'
* importing
* file_name = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. "select_input_file_name
*& Form WRITE_DB_HOME
* Write DB home directory
* no parameters
FORM write_db_home.
CASE sy-dbsys(3).
WHEN 'ORA'.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ORAHOME', 30 searchpoints-dirname.
MOVE: 'DIR_ORAHOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'ADA'.
CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ADA_DBROOT', 30 searchpoints-dirname.
MOVE: 'DIR_ADA_DBROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'INF'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
APPEND searchpoints..
*--- C5056155 End of ALV -------------------------------*
WHEN 'DB6'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
ID 'VALUE' FIELD searchpoints-dirname.
IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_DB2_HOME', 30 searchpoints-dirname.
MOVE: 'DIR_DB2_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
ELSE.
EXIT.
ENDIF.
WHEN OTHERS.
EXIT.
ENDCASE.
ENDFORM. " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = sy-uname.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = 'all'.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN' TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
DATA: windir_path(64), programfiles_path(64).
* hoping that ProgramFiles is set in service user environment
CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
ID 'VALUE' FIELD programfiles_path.
IF programfiles_path IS INITIAL.
* %ProgramFiles% not available. guess from windir
CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
ID 'VALUE' FIELD windir_path.
* e.g. S:\WINDOWS ==> S:\Program Files
CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
ENDIF.
CONCATENATE programfiles_path '\SAP\hostctrl'
INTO searchpoints-dirname.
ELSE.
* on UNIX, the path is hard coded
searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
IF sy-opsys = 'Windows NT'.
searchpoints-dirname = '.\'.
ELSE.
searchpoints-dirname = './'.
ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB' TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
h_ind = sy-tabix.
IF searchpoints-sp_name IS INITIAL.
DELETE searchpoints INDEX h_ind.
ENDIF.
ENDLOOP.
ENDFORM. -
How to select multiple values from the Parameters in the concurrent program
How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?
I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc. -
How to retrieve multiple data from table and represent it in jsp page
Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
i++;
var newRow = document.all("tblGrid").insertRow();
var oCell = newRow.insertCell();
oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
// oCell = newRow.insertCell();
// oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
}<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
ArrayList<Integer> serials = new ArrayList<Integer>();
ArrayList<Integer> apxrate = new ArrayList<Integer>();
ArrayList<Integer> srname = new ArrayList<Integer>();
ArrayList<String> itcode = new ArrayList<String>();
ArrayList<String> itname = new ArrayList<String>();
ArrayList<Integer> iqnty = new ArrayList<Integer>();
ArrayList<String> iuom = new ArrayList<String>();
ArrayList<Integer> pqnty = new ArrayList<Integer>();
ArrayList<String> puom1 = new ArrayList<String>();
ArrayList<Integer> arate = new ArrayList<Integer>();
ArrayList<String> rdate = new ArrayList<String>();
ArrayList<String> bcs = new ArrayList<String>();
ArrayList<String> ccs = new ArrayList<String>();
ArrayList<String> remarkss = new ArrayList<String>();
//ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
//ArrayList<String> dors = new ArrayList<String>();
//ArrayList<String> remarks = new ArrayList<String>();
String entryn = request.getParameter("entryno");
String rows = request.getParameter("rows");
out.println(rows);
//String Entryno = request.getParameter("entryno");
// out.println(Entryno);
int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
if(!Entryno.equals("")){
entryno = Integer.valueOf(Entryno);
if(!rows.equals("")){
rowcount = Integer.valueOf(rows);
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(serials.size());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(srname.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmcd"+i)!=null){
itcode.add(request.getParameter("itmcd"+i).trim());
} //out.println(itcode.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmnm"+i)!=null){
itname.add(request.getParameter("itmnm"+i).trim());
}//out.println(itname.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("indentqty"+i)!=null){
iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("uom"+i)!=null){
iuom.add(request.getParameter("uom"+i).trim());
}//out.println(iuom.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("mcode"+i)!=null){
mucode.add(request.getParameter("mcode"+i).trim());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("packqty"+i).equals("")){
pqnty.add(0);
}else
pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("pack"+i)!=null){
puom1.add(request.getParameter("pack"+i).trim());
}else
puom1.add("");
for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i).equals("")){
arate.add(0);
}else
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
/* for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i)!=null){
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dor"+i)!=null){
try{
rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
}else
{ rdate.add("");}
for(int i=1;i<=rowcount;i++){
if(request.getParameter("bcc"+i)!=null){
bcs.add(request.getParameter("bcc"+i).trim());
}out.println(bcs.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("ccc"+i)!=null){
ccs.add(request.getParameter("ccc"+i).trim());
}out.println(ccs.get(0));
for(int i=1;i<=rowcount;i++){
out.println("remark2");
if(request.getParameter("remark2"+i)!=null){
remarkss.add(request.getParameter("remark2"+i).trim());
}out.println(remarkss.get(0));
ArrayList<String> Idate = new ArrayList<String>();
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dateindent"+i)!=null){
try{
Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
String Rdate = dashdate.format(new java.util.Date());
String tdate = dashdate.format(new java.util.Date());
// String Indentdate = dashdate.format(new java.util.Date());
// String ApprovedT1 = dashdate.format(new java.util.Date());
// String ApprovedT2 = dashdate.format(new java.util.Date());
// String ApprovedT1=" ";
//String ApprovedT2="";*/
String ApprovedT1= dashdate.format(new java.util.Date());
out.println (ApprovedT1);
String ApprovedT2=dashdate.format(new java.util.Date());
out.println(ApprovedT2);
String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
out.println(Indentdate);
String Cocode ="BML001";
out.println(Cocode);
String Deptcode = request.getParameter("dept1");
out.println(Deptcode);
String Empcode = request.getParameter("emp");
out.println(Empcode);
String Refno =request.getParameter("rtype");
out.println(Refno);
String Divcode = request.getParameter("todiv1");
out.println(Divcode);
String Usercode = "CIRIUS";
String Whcode = request.getParameter("stor");
out.println(Whcode);
// String Itemgroupcode = request.getParameter("");
String Itemgroupcode ="120000";
out.println(Itemgroupcode);
String Supplytypecode = request.getParameter("stype");
out.println(Supplytypecode);
String Delcode = request.getParameter("deliverycode");
out.println(Delcode);
String Itemclass="WS";
out.println(Itemclass);
// String Itemclass = request.getParameter("iclass");
// out.println(Itemclass);
String unitcode = request.getParameter("uni");
out.println(unitcode);
String Todivcode = request.getParameter("todiv1");
out.println(Todivcode);
String Appxrate = request.getParameter("rate");
out.println(Appxrate);
String Srno = request.getParameter("srno");
out.println(Srno);
/* String Indqty = request.getParameter("indentqty");
out.println(Indqty);*/
String Itemcode = request.getParameter("itmcd");
out.println(Itemcode);
String Othersp = request.getParameter("remark1");
out.println(Othersp);
String Reqdt = request.getParameter("dor");
out.println(Reqdt);
String Munitcode = request.getParameter("mcode");
out.println(Munitcode);
String Packqty = request.getParameter("packqty");
out.println(Packqty);
String Packuom = request.getParameter("pack");
out.println(Packuom);
String Remark2 = request.getParameter("remark2");
out.println(Remark2);
String BC = request.getParameter("bcc");
out.println(BC);
String CC = request.getParameter("ccc");
out.println(CC);
try{
st=connection.createStatement();
connection.setAutoCommit(false);
String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
out.println(sql);
st.addBatch(sql);
for(int i=0;i<serials.size();i++){
out.println("Inside the Statement");
String query3="test query for u";
out.println(query3);
String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
out.println(queryx);
st.addBatch(queryx);
int[] result=st.executeBatch();
connection.commit();
for(int k=0;k<result.length;k++)
out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
catch(BatchUpdateException bue)
out.println("error1;"+bue+"");
catch(SQLException sql)
out.println("error2;"+sql+"");
catch(Exception l)
out.println("error3;"+l+"");
</html>
Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
<div align="left">
<table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
<tr>
<td ><div align="left"><b>Indent No.</b></div></td>
<td ><label>
<input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
</label></td>
<td ><div align="center"><strong>Indent Date</strong></div></td>
<td ><label>
<div align="center">
<input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
</div>
</label></td>
<td> </td>
<td><div align="right"><strong>Entry No.</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
<td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
<%}%>
<div align="right"></div>
</tr>
<tr>
<td><b>Division</b></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
<td><input type="text" name="div" id="div" /></td>
<td><input type="hidden" name="div1" id="div1" /> </td>
<%}%>
<td> </td>
<td> </td>
<td><div align="right"><strong>Unit</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
<td><input type="text" name="unit" id="unit" /></td>
<td><input type="hidden" name="uni" id="uni" /> </td>
<%}%>
</tr>
<tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshalToo much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach. -
How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?
Sorry I had to reply through your profile Gail from Maine, my PC has java issues. In any event, when I delete them directly from my device everything is perfect and cool. However, in the rare instance I want to add new music that I actually buy in stores (I know, quite the unique and old-fashioned idea...but hey Im an audiophile) once I upload the tunes, everytime I sync my library it re-adds everything that I spent hours deleting. In a perfect world, I thought I could maintain a massive iTunes Library, and add or delete (remove) songs from my iPhone to save both memory or keep my iPhone selections more current/apt to my musical "tastes" at that time. I know about the whole playlist thing, but thought there might be an easier way. ie - checking/un-checking the little box next to the song name, and then doing a sync. Again, everytime I do this however, whether everything is checked or un-checked it adds the entire library! So frustrating. Any suggestions. Thank you graiously in advance for your help.
-
How to delete multiple emails from iPad 2
how to delete multiple emails from iPad 2?
Update to ios7.0.3. They resurrected the trick of Edit, click a single email, then press move, release the email you checked and then all the e mails can be moved to whatever folder you want.
-
How to read appended objects from file with ObjectInputStream?
Hi to everyone. I'm new to Java so my question may look really stupid to most of you but I couldn't fined a solution by myself... I wanted to make an application, something like address book that is storing information about different people. So I decided to make a class that will hold the information for each person (for example: nickname, name, e-mail, web address and so on), then using the ObjectOutputStream the information will be save to a file. If I want to add a new record for a new person I'll simply append it to the already existing file. So far so good but soon I discovered that I can not read the appended objects using ObjectInputStream.
What I mean is that if I create new file and then in one session save several objects to it using ObjectOutputStream they all will be read with no problem by ObjectInputStream. But after that if in a new session I append new objects they won't be read. The ObjectInputStream will read the objects from the first session after that IOException will be generated and the reading will stop just before the appended objects from the second session.
The following is just a simple test it's not actual code from the program I was talking about. Instead of objects containing different kind of information I'm using only strings here. To use the program use as arguments in the console "w" to create new file followed by the file name and the strings you want save to the file (as objects). Example: "+w TestFile.obj Thats Just A Test+". Then to read it use "r" (for reading), followed by the file name. Example "+r TestFile.obj+". As a result you'll see that all the strings that are saved in the file can be successfully read back. Then do the same: "+w TestFile.obj Thats Second Test+" and then read again "+r TestFile.obj+". What will happen is that the strings only from the first sessions will be read and the ones from the second session will not.
I am sorry for making this that long but I couldn't explain it more simple. If someone can give me a solution I'll be happy to hear it! ^.^ I'll also be glad if someone propose different approach of the problem! Here is the code:
import java.io.*;
class Fio
public static void main(String[] args)
try
if (args[0].equals("w"))
FileOutputStream fos = new FileOutputStream(args[1], true);
ObjectOutputStream oos = new ObjectOutputStream(fos);
for (int i = 2; i < args.length ; i++)
oos.writeObject(args);
fos.close();
else if (args[0].equals("r"))
FileInputStream fis = new FileInputStream(args[1]);
ObjectInputStream ois = new ObjectInputStream(fis);
for (int i = 0; i < fis.available(); i++)
System.out.println((String)ois.readObject());
fis.close();
else
System.out.println("Wrong args!");
catch (IndexOutOfBoundsException exc)
System.out.println("You must use \"w\" or \"r\" followed by the file name as args!");
catch (IOException exc)
System.out.println("I/O exception appeard!");
catch (ClassNotFoundException exc)
System.out.println("Can not find the needed class");How to read appended objects from file with ObjectInputStream? The short answer is you can't.
The long answer is you can if you put some work into it. The general outline would be to create a file with a format that will allow the storage of multiple streams within it. If you use a RandomAccessFile, you can create a header containing the length. If you use streams, you'll have to use a block protocol. The reason for this is that I don't think ObjectInputStream is guaranteed to read the same number of bytes ObjectOutputStream writes to it (e.g., it could skip ending padding or such).
Next, you'll need to create an object that can return more InputStream objects, one per stream written to the file.
Not trivial, but that's how you'd do it. -
How to Export multiple photos from pdf files?.
Good day.
How to Export multiple photos from pdf files?.
Thanks.Hello
how to reach from file menu ?.
Running Adobe reader 9 version 9.3.0
Thanks again.
Maybe you are looking for
-
Hello, I need to display a method within a BADI and send out a message of type E without stop completely the transaction,but instead let the user to correct the eventual error. Do you need if there are any other way instead of the normal message e000
-
Error in Java 'Logical handle no longer valid'
Created 2 objects and 1 collection in Oracle. CREATE TYPE exe_grant_scr_dtls_t AS OBJECT grant_id VARCHAR2(8), option_price NUMBER(9,4), option_type VARCHAR2(3), total_shares
-
Error when syncing with iTunes and Windows 7 64Bit(AMD)
I keep getting this error: Attempting to copy to the disk " Your Name Here's IPhone" failed. The Device timed out... It works fine on my Netbook ( Wind 7 32 Bit) I am sure someone has this issue... I tried running in XP mode, Shut off my Pass lock, U
-
Freehand files aren't recognized by Illustrator CS6?
Am I only the one with this issue? This creates a huge bind after signing up for the full CS6 Creative Cloud service when I have hundreds of archived Freehand vector client jobs that I still refer to by dragging the files into Illustrator. After CS3,
-
Compare two dateTime with different timezone
HI, All, I found a strange thing when compare two dateTime in BPEL; In my BPEL process, client passed a date time to the process , and the process compare the date time with current data time. 1.client pass cutoffDate to process 2. in a switch activi