How to receive integers and double types in tcpread?

I am trying to send data of double type from a linux machine through a C program.I am not able to read any data type from tcpread vi except the string data type.
helpme out of this problem
I am attaching my C program running on linux
Attachments:
server.c ‏3 KB

i modified your VI by first type casting your string into an array of U16's. Then I did the byte swap and then re-cast this array as an array of U8's.
If you are reading a single value as 4 bytes, try type casting it directly into a single precision flaoting point value.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Data_Client3.vi ‏39 KB

Similar Messages

How can create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version

Hi All,
Can any one help, how to create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version.This is my task.
Given BADI name was----VENDOR_ADD_DATA_BI .
Thanks

Anil,
look at this thread ..may be this helps you.
Re: 824 IDOC and BADI/User Exit
sateesh.

How to invoke functions and data type( ex. sflight structure ) that is in t

Hi,experts,
I create a funcion(zz_test) that return sflight table type data. I need to invoke the function in the Webdynpro for java application.
I think I would import the funtion to local.
But I don't know how to import the function and the data type using SAP NetWeaver Developer Studio?
But I don't know how to invoke functions and data type( ex. sflight structure ) that is in the R/3 in the WDJ?
Do you give me some hints?
Thanks a lot!
Best regards,
tao

Hi Wang Tao,
For achieving this you need to user Adaptive RFC models.
This link explains you on the same :
http://help.sap.com/saphelp_nw70/helpdata/EN/6a/11f1f29526944e8580c5e59333d96d/frameset.htm
Thanks
Namrata

How To Get FileType and MIME Type from a File

Hi,
I am using following ways to get FileType and MIME Type.
I am able to get file type, but I am getting MIME Type as */*
Can any one please let me know how to get MIME Type, but it should not be time consuming process.
For File Type I am using following Code:
private String getFileData(InputStream inStream) {
fileName = C:\temp\temp.tiff
String filePath = Util.createTempFile(fileName);
RandomAccessFile raf = new RandomAccessFile(filePath, "rw");
while (inStream.available() > 0) {
     byte[] buf = new byte[inStream.available()];
     inStream.read(buf);
     raf.write(buf);
inStream.close();
raf.close();
File file = new File(filePath);
JFileChooser chooser = new JFileChooser();
String fileType = chooser.getTypeDescription(file);
file.delete();
//MIME Type I am getting from
DataHandler data = new DataHandler(new DocumentSource(inStream));
data.getContentType();
data.getContentType() is not working well in all cases.
Can any one help me on this.
Thanks in advance,
Ram.
Edited by: javausers07 on Apr 15, 2009 4:25 PM

javausers07 wrote:
Hi,
I am using following ways to get FileType and MIME Type.
I am able to get file type, but I am getting MIME Type as */*
Can any one please let me know how to get MIME Type, but it should not be time consuming process.
For File Type I am using following Code:
private String getFileData(InputStream inStream) {
fileName = C:\temp\temp.tiff
String filePath = Util.createTempFile(fileName);
RandomAccessFile raf = new RandomAccessFile(filePath, "rw");
while (inStream.available() > 0) {
     byte[] buf = new byte[inStream.available()];
     inStream.read(buf);
     raf.write(buf);
inStream.close();
raf.close();
File file = new File(filePath);Why do you do all above?
JFileChooser chooser = new JFileChooser();
String fileType = chooser.getTypeDescription(file);
file.delete();
//MIME Type I am getting from
DataHandler data = new DataHandler(new DocumentSource(inStream));
data.getContentType();
data.getContentType() is not working well in all cases.That's because there's no way to get MIME type of all files on all filesystems.
Kaj

ABAP how to receive the control byte [] type of argument?

I use C # to write a control that contains a method:
public byte [] CutBytePicture ();
I refer to the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/85/c80ec6e9464c4ab8ca829a7b9e8a48/frameset.htm
Use XSTING type to receive the byte [] type of return value, but returns a length of 0; open client Autmation tracking, display Result = <Unknow>.
In the end what should be the type used in ABAP to receive byte [] type then?
Thanks!

The name of the control is its label. It may have an empty label, meaning no name. It's also possible its label is invisible. Right click it and go to Visible Items to find out.
As for the type, the color and shape of the icon is usually the best way to tell.
Right click the diagram terminal of the control and select View as Icon. This might help you. If it doesn't, I suggest you post the 2 controls in an empty VI, and I'm sure someone can figure it out.
Try to take over the world!

How receiv file and inert to db by ejb?

my client is application,it sends some files to ejb,how to receive files
and insert to db by ejb?

DataSource dataSource = (DataSource) (new InitialContext()).lookup( "jdbc.DataSource"
Connection con = dataSource.getConnection();
Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery();
"wuyuquan" <[email protected]> wrote:
my client is application,it sends some files to ejb,how to receive files
and insert to db by ejb?

Single and double quotes entered in form field cause corruption?

I am creating a database change request system using in APEX 2.2 and the main form has a description field (clob) and a API_description field (varchar2(4000)) that are text area fields on the page. The form seems to have trouble when the string data entered into the text area page items on the form contain single and double quotes.
 
I have pasted my test data below in this problem description(this is not true sql but it gets the point accross). I use the wizard created insert process to get the data into the db from the text fields in the wizard generated form, then use the wizard created fetch process to get the data back out and rendered on the same form. When I use the test data below, sometimes a few characters dissappear from my input data on the way out, sometime form fields go away, and their html is interspersed with the previous form field's data on the page. And I get different results on different tests with the same data.
 
Do I have to do something special for a vanilla htmldb text page item on a form to be able to receive single and double quotes in the string input in order to avoid that string data confusing the processing on the way in to the Database or on the way out for rendering?
 
Do I have to escape the characters? How do I do this?
 
The "varchar2(1) := ‘A’" part of the below TEST DATA string seem to cause the most trouble. The behavior is erratic - sometimes the pattern works, sometimes html is interspersed in one place, sometimes another (on the way back out)
 
START TEST DATA:
Add column pcl3_data_ind varchar2(1) to edc_tran,edc_log, edc_recreate_tran table
Or
Create a file with following sql in it
Insert into sometable values(‘A’,sysdate);
Or
create new table as follows
create table “someschema”.“sometable”
(id number not null,
Name varchar2(20) not null,
Join_date sysdate
Active varchar2(1) := ‘A’
END TEST DATA:
 
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Here is an example of the test data being displayed after being fetched back out of oracle (this will look like gibberish when rendered in the forum system (end of problem description except for example):
 
env
Add column pcl3_data_ind varchar2(1) to edc_tran,edc_log, edc_recreate_tran table
Or
Create a file with following sql in it
Insert into sometable values(‘A’,sysdate);
Or
crete new tableas follws
crate table “somesca”.“sometable”
har2(20) not null,
Join_date sysdate
Active varchar2(1) := ‘A’
woextarea>
<a class="eLink" title="Edit" href="javascript:popupURL('f?p=4000:371:204538675714370::::P371_ID,FB_FLOW_ID,FB_FLOW_PAGE_ID:1034609472735510,104,2');" tabindex="999"><img src="/i/e.gif" alt="Edit" class="eLink" /></a></td></tr><tr><td nowrap align="right"><label ...

I found a good php related post that has a nice set of the potentially problematic characters (this is in the context of word pasted into IE I think). I am pretty confident that at least single curly quotes do not work well in apex 2.2). I would not be surprised if some of the others were trouble as well.:
http://lists.evolt.org/archive/Week-of-Mon-20030602/141975.html
here is the list
$trans_tbl[chr(34)] = '"' ; // quote
 $trans_tbl[chr(38)] = '&' ; // ampersand
 $trans_tbl[chr(60)] = '<' ; // less-than
 $trans_tbl[chr(62)] = '>' ; // more-than
 $trans_tbl[chr(128)] = '€' ; // euro
 $trans_tbl[chr(129)] = '€' ; // euro
 $trans_tbl[chr(130)] = '‚' ; // low quote
 $trans_tbl[chr(131)] = 'ƒ' ; // florin
 $trans_tbl[chr(132)] = '„' ; // double low quote
 $trans_tbl[chr(133)] = '…' ; // ellipsis
 $trans_tbl[chr(134)] = '†' ; // dagger
 $trans_tbl[chr(135)] = '‡' ; // double dagger
 $trans_tbl[chr(136)] = 'ˆ' ; // circumflex
 $trans_tbl[chr(137)] = '‰' ; // per thousand
 $trans_tbl[chr(138)] = 'Š' ; // S caron
 $trans_tbl[chr(139)] = '‹' ; // left angle quote
 $trans_tbl[chr(140)] = 'Œ' ; // OE ligature
 $trans_tbl[chr(142)] = 'Ž' ; // Z caron
 $trans_tbl[chr(145)] = '‘' ; // left single quote
 $trans_tbl[chr(146)] = '’' ; // right single quote
 $trans_tbl[chr(147)] = '“' ; // left double quote
 $trans_tbl[chr(148)] = '”' ; // right double quote
 $trans_tbl[chr(149)] = '•' ; // bullet
 $trans_tbl[chr(150)] = '–' ; // en dash
 $trans_tbl[chr(151)] = '—' ; // em dash
 $trans_tbl[chr(152)] = '˜' ; // small tilde
 $trans_tbl[chr(153)] = '™' ; // trademark
 $trans_tbl[chr(154)] = 'š' ; // small s caron
 $trans_tbl[chr(155)] = '›' ; // right angle quote
 $trans_tbl[chr(156)] = 'œ' ; // oe ligature
 $trans_tbl[chr(158)] = 'ž' ; // small z caron
 $trans_tbl[chr(159)] = 'Ÿ' ; // Y with diaeresis
 
-Geoffrey

Boolean & Double types for Data Objects

Are the Boolean and Double types going to be supported/implemented as usable types for Process/Project data objects?
The option is available for each of these in JDeveloper, but they become highlighted in red when you select them and if you accept they get converted into String types. I'm not sure if this means this isn't implemented yet or it won't be supported. If they're not supported types they shouldn't be displayed as options.

That is currently I bug that I found as well. If you type in the type name manually as Bool that should work. For Double I think it is either Real or Decimal. Once you type in these values the red will go away and they will work.

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

How to use Adaptive WebService Model with CAF WebService and Complex Type

Hi All,
I am trying to use the Adaptive Web Service Model and call a WebService generated by the CAF. The return type of the WebService is a Complex Type.. I receive an exception when trying to instantiate the Model Node.
Does anybody know how to use the Adpative Web Service Model with CAF WebServices and Complex Types as return type?
Help is appreciated..
Thanks, Johannes

Thanks Mukesh.
It is not possible to apply the Service Controller Template on Enterprise Java Bean Models as described in the Document. When I try to aply the template on the EJB Model, NWDS says: Only Webservice Models and RFC Models are supported...???
I did not find any information about how to return complex types in AWS.. in this document???
Is there such information available? Has anybody ever done that? There must be a way to do that.. Is is the standard approach, isn't it...? Please help me out there.. I need to get this running..
Thanks, Johannes

How to convert data buffer of type "oracle::occi::OCCI_SQLT_NUM" to double

Hello All,
I am using bulk reading by utilizing 'setDataBuffer()' method call and fetching N records at a time.
It works well for fields of Oracle type VARCHAR, when I set
h5. rs->setDataBuffer(col, buff, oracle::occi::OCCI_SQLT_CHR, size, lens, inds);
and later iterating and interpreting data within 'buff' like this:
h5. char* text = ((char*)buff) + size*i; <-- length is in lens array
When the column's data type is NUMBER however, I am stuck.
Indicating that data type to data buffer works well:
h5. rs->setDataBuffer(col, buff, oracle::occi::OCCI_SQLT_NUM, size, lens, inds);
I would like now to extract a value of c++ double type from that buffer.
But I do not have an idea how to handle data within buff. I suppose it should have NUMBER stored inside in some internal format (just as described in Oracle® C++ Call Interface Programmer's Guide, section 'Description of External Datatypes', NUMBER)
Gestures like casting to double or trying to interpet the buffer's inner as oracle::occi::Number do not produce sensible results.
Could you help me to understand how can I obtain the double value from that buffer in a bulk read?

I have the following code which has been working for me.
showln ("Array Fetch");
sql = "SELECT c1, c2, c3, c4 FROM nd17_otab";
stmt->setSQL ( sql );
OCCIResultSet *rs = stmt->executeQuery();
rs->setDataBuffer (1, num, OCCIINT, sizeof(ub4), lenC1);
rs->setDataBuffer (2, flt, OCCIBFLOAT, sizeof(float), lenC2);
rs->setDataBuffer (3, dbl, OCCIBDOUBLE, sizeof(double), lenC3);
rs->setDataBuffer (4, str, OCCI_SQLT_CHR, CHRS, lenC4);
if ( rs->next(ROWS) )
show ("Number of Rows Fetched: ") << rs->getNumArrayRows () << endl;
showln ("Fetched Records");
for (int j = 0; j < ROWS; j++ )
show ("C1: ") << num[j] << endl;
show ("C2: ") << flt[j] << endl;
show ("C3: ") << dbl[j] << endl;
show ("C4: ") << str[j] << endl;
stmt->closeResultSet(rs);
c1, c2, c3, c4 columns in table nd17_otab are of type NUMBER, BINARY_FLOAT, BINARY_DOUBLE & VARCHAR2

When I type I cannot add text when I select the text area and double click. Why?

When I type I cannot add text when I select the text area and double click. Why?

Premiere Elements 11 trial version for macMac computer photos uploaded to the timeline just finetrying to make a new title, streaming or in a framedouble clicked on the text in the box and nothing shows up when I type on my keyboard. I can delete the words that are there but not type in new ones. I selected the type and size, etc.
Thanks if you can figure it out. I gave up!
I may just un-install it all together if I can't get to work.Joanne
Date: Thu, 9 May 2013 17:59:08 -0700
From: [email protected]
To: [email protected]
Subject: When I type I cannot add text when I select the text area and double click. Why?
    Re: When I type I cannot add text when I select the text area and double click. Why?
    created by A.T. Romano in Premiere Elements - View the full discussion
Joanne Murray J2 What version of Premiere Elements are you using and on what operating system (including 32 or 64 bit) is your Premiere Elements installed? Forgive the questions if you have been there and done that, but I do not want to take anything for granted that might hinder a speedy resolution to your issue. Are you opening an already created title that is sitting on the Timeline in order to edit it in the Titler or are you trying to create a new Title (Default Text or other)? Do you know how to work with the Selection Tool and Type Tool in the Titler? Once I know what version of Premiere Elements that you are using, I will give you specific how to details. Thanks. ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5307494#5307494
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5307494#5307494
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5307494#5307494. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to display dynamic datas and double datas (chart)

Hi all !
I would like to display dynamic datas and double datas by using charts.
However, it doesn't work and I don't understand why.
Can you help me to fix that ?
Best regards,
- John
Attachments:
double_dynamics_data.vi ‏54 KB

Hi John,
the sine looks like it should look with your VI!
You convert the DDT to a scalar DBL. That conversion will only use the first sample of the generated sine waveform - usually this is always the same (offset) value when you generate full periods… Or to put it in a mathematical expression: sin(0°)+4 = 4!
When you want to display waveform you should work with waveforms!
Actually, I have used Dynamic data type in order to simulate an signal.
Well, I also simulated a signal in my example VI. I didn't use any ExpressVI to do so…
In a few weeks, I will receive a sensor. I will use in LabView 'DAQ Assistant' whose the ouput is a Dynamic Data.
Nobody forces you to use the DAQAssistent ExpressVI. There are nice DAQmx functions available and LabVIEW comes with a lot of ready-to-use example VIs…
That's why, I used in first place, the 'Simulate signal'. So I think I should keep Dynamic Data Type
I do think you don't need to use the DDT. I think it's better to understand what is going on in your VI. And I think the DDT will be no help for you…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

My phone only let's me send iMessage from my email, how do I send and receive from my number?

My phone only let's me send iMessage from my email, how do I send and receive from my number?

Hi jwol21,
If you are having issues sending iMessages from your phone number, you may want to double check that your phone number and your Apple ID have been linked and that your phone number is listed under Start New Conversations From. You may find the following article helpful:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/ht5538
Regards,
- Brenden

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised the value of Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How to receive integers and double types in tcpread?

Similar Messages

Maybe you are looking for