How to record DVB-S Stream with JavaTV/JMF ?

Hi,
i'm starting to program with JavaTV and JMF. Now my Question is, how can i record a DVB-S Stream (DVB-Card: Haupauge Nexus) to my hdd?

MHP uses JMF 1.0, which does not include recording functionality. If you want to do this in Java then JMF 2.x includes recording support, but I'm not sure whether there is a JMF implementaiton that supports the Hauppage cards.
Steve.

Similar Messages

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder ..that doesn't have firewire out/input?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

How to play live Video Stream with Flex?

I'm trying to get Flex Builder 3 to play a live video stream with Flash Media
Server and Flash Live Media Encoder.
I'm able to stream pre-recrorded (vod) flvs in flex from flash media server.
I'm able to stream live video using Flash/FMS/Flas Live Media Encoder, but not
with Flex.
This code streams pre-recorded Video on Demand flvs, but not live streams:
If I change source to "rtmp://localhost/live/livesream.flv, I get nothing.
What am I doing wrong?
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
    <mx:HBox>
        <mx:Label text="RTMP FMS 2.0"/>
        <mx:VideoDisplay
            autoBandWidthDetection="false"
            source="rtmp://localhost/vod/Legend.flv"/>
    </mx:HBox>
</mx:Application>
Oh and sorry for the double post. I didn't know there was a seperate FMS forum.

That worked! Thanks *very* much. Stupid of me to forget to set the live attribute to true. Also removed the .flv. BTW: what video component do you prefer?
Here's the working code:
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
    <mx:HBox>
        <mx:VideoDisplay
            live="true"
            autoBandWidthDetection="false"
            source="rtmp://localhost/live/livestream"/>
    </mx:HBox>
</mx:Application>

How to record an interactive tutorial with a permanent hint button?

Hello,
I'd like to record a tutorial which would make a user do something requiring a few clicks and I'd like a hint button to be permanently displayed and when the user clicks it it will give the answer. For example I'd like to write a caption: "Now your turn, please save this document as a new document in the Invoices folder". I'd like the user to be bale to click as many times as he wants but the hint button should be displayed permanently and if the user wishes to click it it will display the answer for example: " Click: File", "Click Save as", etc.
I've tried to set up a tutorial but it only showed the hint when the user actually clicked the right button which missed the point.
I would appreciate if someone could help and let me know how to set it up or direct to an appropriate help link.
Kind regards,
hutia

Hello and welcome,
Do you mean that the default hint caption is not what you want? I could explain a way to do it, but it will mean a lot of extra work. First tell me which version (exact number please) of Captivate you are using? How much experience do you have with advanced (shared) actions and variables? Does it have to be a 'click' button or is a rollover caption also possible?
The idea is to show a text container that has a variable, when clicking or rolling over the button (I would prefer a shape button for several reasons). The variable could be populated when entering each slide with the proper text. With this approach timing for the rest of the project is possible both for the button and for the text container.
If you'd do it with a different button on each slide, and a different text container, you'll end up with a lot of objects to be maintained (and a bigger filesize), in that case I would recommend shared actions for sure.
Lilybiri

How to record in dual-mono with 2 channel audio interface?

I'm using an iPad 3 with an ART 2-channel usb/mixer interace. I use the Camera app for video recording and the audio is routed thru the interface. Works fine except that I can't seem to figure out how to change the default setting of the iPad/Camera app so that it will record the audio in dual mono. Right now it only records in stereo, with the 2 channels panned hard left and right. Recording vocal and guitar with the dedicated 2 mics/channels makes for a very wide and un-natural stereo image.
Can Apple or someone help me figure this out?
Thanks!

I could be wrong, but I don't believe the Camera app offers a dual-mono option. You'll probably need to look for another app, perhaps a third-party app, that can do this.
Regards.

How to play http live streaming with VLC using FMS 4.0

Hello,
i'm using FMS 4 and i need to play my http live streaming event with VLC
I have had the following result with firefox using the url : http://myip:8134/live/events/livepkgr.old/events/_definst_/liveevent.f4m
<manifest>
<id>
                    livepkgr.old/events/_definst_/liveevent
          </id><mimeType>
          </mimeType><streamType>
                    live
          </streamType><duration>
                    0
          </duration><media streamId="livestream1" bitrate="100" url="../../../../streams/livepkgr.old/streams/_definst_/livestream1/livestream1" bootstrapInfoId="bootstrap7580"><metadata>
                              AgAKb25NZXRhRGF0YQgAAAAAAAhkdXJhdGlvbgAAAAAAAAAAAAAFd2lkdGgAQHQAAAAAAAAABmhlaWdodABAbgAAA AAAAAAMdmlkZW9jb2RlY2lkAgAESDI2NAAKYXZjcHJvZmlsZQBAU0AAAAAAAAAIYXZjbGV2ZWwAQD8AAAAAAAAADnZ pZGVvZnJhbWVyYXRlAP/4AAAAAAAAAAl0cmFja2luZm8KAAAAAgMABmxlbmd0aAAAAAAAAAAAAAAJdGltZXNjYWxlA ECPQAAAAAAAAAhsYW5ndWFnZQIAA2VuZwAACQMABmxlbmd0aAAAAAAAAAAAAAAJdGltZXNjYWxlAECPQAAAAAAAAAh sYW5ndWFnZQIAA2VuZwAACQANc21wdGVUaW1lSW5mbwMAC3NtcHRlT2Zmc2V0AAAAAAAAAAAAAAAJAAdjdXN0ZGVmC gAAAAAAAAk=
                    </metadata></media><media streamId="livestream2" bitrate="200"><metadata>
                    </metadata></media><media streamId="livestream3" bitrate="350"><metadata>
                    </metadata></media><bootstrapInfo profile="named" url="../../../../streams/livepkgr.old/streams/_definst_/livestream/livestream.bootstrap" id="bootstrap3136">
          </bootstrapInfo><media streamId="livestream" url="../../../../streams/livepkgr.old/streams/_definst_/livestream/livestream" bootstrapInfoId="bootstrap3136"><metadata>
                              AgAKb25NZXRhRGF0YQgAAAAAAAhkdXJhdGlvbgAAAAAAAAAAAAAFd2lkdGgAQHQAAAAAAAAABmhlaWdodABAbgAAA AAAAAAMdmlkZW9jb2RlY2lkAgAESDI2NAAKYXZjcHJvZmlsZQBAU0AAAAAAAAAIYXZjbGV2ZWwAQD8AAAAAAAAADnZ pZGVvZnJhbWVyYXRlAP/4AAAAAAAAAAl0cmFja2luZm8KAAAAAgMABmxlbmd0aAAAAAAAAAAAAAAJdGltZXNjYWxlA ECPQAAAAAAAAAhsYW5ndWFnZQIAA2VuZwAACQMABmxlbmd0aAAAAAAAAAAAAAAJdGltZXNjYWxlAECPQAAAAAAAAAh sYW5ndWFnZQIAA2VuZwAACQANc21wdGVUaW1lSW5mbwMAC3NtcHRlT2Zmc2V0AAAAAAAAAAAAAAAJAAdjdXN0ZGVmC gAAAAAAAAk=
                    </metadata></media><bootstrapInfo profile="named" url="../../../../streams/livepkgr.old/streams/_definst_/livestream1/livestream1.bootstrap " id="bootstrap7580">
          </bootstrapInfo>
</manifest>
How can i play that event with VLC?
Regards,

Problem solved - thanks to JayCharles. I forgot to set the live attribute. Here's the working code:
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
    <mx:HBox>
         <mx:VideoDisplay
             live="true"
             autoBandWidthDetection="false"
             source="rtmp://localhost/live/livestream"/>
     </mx:HBox>
</mx:Application>

How to use DVB on ArchLinux (with an em28xx chip)?

Hi there,
I'm trying to figure out how to use my Terratec Cinergy Hybrid T USB XS on ArchLinux. It should use the em2880 chip.
I think that the correct kernel modules are already bundled with the latest kernel version:
bash-3.2# lsmod | grep 'em28'
em28xx_dvb 10500 0
dvb_core 86956 1 em28xx_dvb
em28xx_alsa 11400 0
em28xx 71852 2 em28xx_dvb,em28xx_alsa
compat_ioctl32 11520 1 em28xx
videodev 38784 3 tuner,em28xx,compat_ioctl32
videobuf_vmalloc 9476 1 em28xx
videobuf_core 20484 2 em28xx,videobuf_vmalloc
ir_common 39428 1 em28xx
tveeprom 16900 1 em28xx
i2c_core 25760 8 tuner_xc2028,tuner,v4l2_common,tvp5150,em28xx,nvidia,tveeprom,i2c_nforce2
snd_pcm 82440 4 em28xx_alsa,snd_pcsp,snd_hda_intel,snd_pcm_oss
snd 64840 13 em28xx_alsa,snd_pcsp,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
usbcore 156816 8 em28xx_dvb,em28xx_alsa,em28xx,usbhid,isp1760,ehci_hcd,ohci_hcd
This is the dmesg after plugging the USB device:
usb 2-4: new high speed USB device using ehci_hcd and address 5
usb 2-4: configuration #1 chosen from 1 choice
em28xx new video device (0ccd:005e): interface 0, class 255
em28xx Doesn't have usb audio class
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
em28xx #0: chip ID is em2882/em2883
tuner' 2-0061: chip found @ 0xc2 (em28xx #0)
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30 00
em28xx #0: i2c eeprom f0: 38 00 30 00 38 00 33 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a, hash = 0x4c13bfbe
Vendor/Product ID= 0ccd:005e
AC97 audio (5 sample rates)
500mA max power
Table at 0x27, strings=0x409e, 0x1cde, 0x346a
em28xx #0:
em28xx #0: The support for this board weren't valid yet.
em28xx #0: Please send a report of having this working
em28xx #0: not to V4L mailing list (and/or to other addresses)
xc2028 2-0061: creating new instance
xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
firmware: requesting xc3028-v27.fw
xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
xc2028 2-0061: i2c input error: rc = -19 (should be 2)
xc2028 2-0061: Unable to read tuner registers.
xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
xc2028 2-0061: i2c input error: rc = -19 (should be 2)
xc2028 2-0061: Unable to read tuner registers.
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 2-005c: *** unknown tvp8081 chip detected.
tvp5150 2-005c: *** Rom ver is 130.131
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx #0: Found Terratec Hybrid XS (em2882)
tvp5150 2-005c: tvp5150am1 detected.
So it seems that the device has been recognized.. I downloaded the firmwares from http://konstantin.filtschew.de/v4l-firmware/ (the v2, since it is the 0ccd:005e version). I've also extracted the xc3028-v27.fw from the windows drivers using extract_xc3028.pl, since dmesg was complaining for the missing file.
However, Kaffeine doesn't recognize the DVB device, and I can't get any other player to work with it.
Is the kernel-bundled em28xx module broken for this device? I remember that I could make this USB dongle work some months ago in an Ubuntu setup, compiling the v4l from sources - do you think that this is required? I see many people can't compile it with the latest kernels.. and don't know exactly where to start.
Any help would be very appreciated.. thank you
Cosma

Anybody can explain me what's the difference between /dev/video* and /dev/adapter*/* ?
I tried to cat my /dev/video1 (sometimes, plugging out and in the adapter, it gets assigned to video1) and some weird stuff is actually received so I decided to try a frequency scan.. I prepared the frequency file for my local muxes, installed the linuxtv-dvb-apps package, and tried to scan:
bash-3.2# scan ./it-Roma
scanning ./it-Roma
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory
(also triend to play with the -f, -d and -a options to switch on adapter1, demux1 and frontend1)
Now, those devices was not created at all in my system.. isn't v4l supposed to create them, once recognized the dvb device?

How to record yourself messing around with an instrument?

Say I have added one whole note of a synthesizer to the timeline.
Now I added an effect.
How do I record myself interacting with that effect while the sound of the synth is playing simultaneously?

http://support.apple.com/kb/PH1993?viewlocale=en_US

How many records can be displayed with fm REUSE_ALV_LIST_DISPLAY?

Hi guys!!!
Now here's is my problem. I've been trying to display in a program wih fm REUSE_ALV_LIST_DISPLAY, aproximately 450,000 records. But the fact is that after 10 or 15 minutes the system stops the process.
This case is not the same when I display with the same function a very low number of lines.
What can I do?
Maybe one possibility is using the method for ALV List (ALV List Objects)
h2Please ur answers now!
Thanks in advance!!!
Raul Romero

Hi,
If you are not expecting to do any additional functionality that the ALV has, like, summing, sorting, filter...etc,
better display the result in a normal LIST.
or try to filter your results and in the selection screen, give an option to enter the number records you want to display in the report.
Regards,
Subramanian

How do I get NETFLIX streaming with my AppleTV?

I have all the Itune movies and Tv shows available to me for a price. What I want now is NETFLIX Movie Streaming. I have not ben successful in creating a "activation code". Please note that I am a Time Warner Cable subscriber. How do I get the ability to do instant streaming of movies?

There is no activiation code. You simply log into your account on the ATV

How to record on iPhone 4 with external microphone?

I got a GoPro for christmas and my main intentions were to use it with my car. In this case, sound is very important and unfortunately, the GoPro does not record too good of audio.
My question is: What steps will I have to take to utilize an external mic with my iPhone and more importantly record it? I have looked on the app store for apps, but I am afraid that it wont record or recognize the sound coming from the external mic. I am wary of "voice recorders" because I know some try to implement technology such as noise cancellation that would skew my end product. I just want raw sound.
Additionaly, what adapters if any will be required?
Thank you in advance.

Hello everyone,
I just found this topic which seems to be related to my problem.
Firstly, I do not own an iPhone 4 like you but a 3Gs (doesn't really matter I guess).
I also bought an adapter from kvconnection : http://www.kvconnection.com/product-p/km-iphone-mic-a22.htm
My wish is to make phone calls using a microphone connected to my computer. I have some kind of a home-studio, and I would like to build a dock on which I could plug my iPhone, with the upper jack connected to my soundcard, on which my mic or my computer sound comes.
In simpler terms, I'm trying to use an external audio source than my iphone microphone during calls. But this adapter i bought doesn't seem to work.
Have you guys a piece of advice or any solution ? Maybe just some compassion sharing the same problem =)
Good holidays to all of you!

How can I read a binary file stream with many data type, as with AcqKnowledge physio binary data file?

I would like to read in and write physiological data files which were saved by BioPac�s AcqKnowledge 3.8.1 software, in conjunction with their MP150 acquisition system. To start with, I�d like to write a converter from different physiodata file format into the AcqKnowledge binary file format for version 3.5 � 3.7 (including 3.7.3). It will allow us to read different file format into an analysis package which can only read in file written by AcqKnowledge version 3.5 � 3.7 (including 3.7.3).
I attempted to write a reader following the Application Note AS156 entitled �AcqKnowledge File Format for PC with Windows� (see http://biopac.com/AppNotes/ app156Fi
leFormat/FileFormat.htm ). Note the link for the Mac File format is very instructive too - it is presented in a different style and might make sense to some people with C library like look (http://biopac.com/AppNotes/ app155macffmt/macff.htm).
I guess the problem I had was that I could not manage to read all the different byte data stream with File.vi. This is easy in C but I did not get very far in LabView 7.0. Also, I was a little unsure which LabView data types correspond to int, char , short, long, double, byte, RGB and Rect. And, since it is for PC I am also assuming the data to be written as �little endian� integer, and thus I also used byte swap vi.
Two samples *.acq binary files are attach to this post to the list. Demo.acq is for version 3.7-3.7.2, while SCR_EKGtest1b.acq was recorded and saved with AcqKnowledge 3.8.1, which version number is 41.
I would be grateful if you someone could explain how to handle such binary file stream with LabView and send an example to i
llustrate it.
Many thanks in advance for your help.
Donat-Pierre
Attachments:
Demo.acq ‏248 KB
SCR_EKG_test1b.acq ‏97 KB

The reading of double is also straight forward : just use a dble float wired to the type cast node, after inverting the string (indian conversion).
See the attached example.
The measure of skin thickness is based on OCT (optical coherent tomography = interferometry) : an optical fiber system send and received light emitted to/back from the skin at a few centimeter distance. A profile of skin structure is then computed from the optical signal.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Read_AK_time_info.vi.zip ‏9 KB

How does exactly AMS sync a video stream with another stream of audio only ?

I have the following situation: 2 instances of FMLE on one machine and another machine with AMS Starter.
The instances of the FMLE are:
1. Video H.264 + audio MP3
2. Audio only MP3 - track 1
The application on AMS is a livepkgr/_definst_ and i am using HDS with a live event
I have an OSMF based player to consume the streams and to do audio switch using late binding audio.
When I consume the Video with the Default audio everything works just fine. The problem is that when I try to consume the Video with the other audio track, the audio tack has a 1 second delay compared to the video.
I have tried to fix this by changing the configurations on the FMLE, but it doesnt seem to work. So I really want to know how does exactly AMS syncronize differents streams, in this case a video stream with a different audio stream.

First, what is the file format, and its specs. for the remote recorder?
Though the rates of modern cameras and digital recorders SHOULD match 100%, in the real-world, they seldom do. This make perfect syncing a labor intensive process.
One should do tests between the cameras and the recorders, to find out the % or error. Then, adjust their Audio to match first. As an example, one user in the PrPro Forum tested his Panasonic cameras, and his Zoom recorders, and found that the Zooms were off by 0.04% constantly. To correct this, he used the Time Remapping (with Maintain Pitch checked), and would apply that adjustment to all of the Zooms' files - perfect sync.
As for the Waveform not displaying for your remote recorder, did you allow those files to completely Conform (creation of the CFA and PEK files, the latter is the Waveform Display)? See this article: http://forums.adobe.com/thread/726693?tstart=30
Also, you should be able to increase the vertical zoom of your Audio Tracks, and hence any Clips on them, by hovering the Cursor over the junction between Tracks, in the Track Header, and when it turns into a = sign, with up/down arrows, click+drag. Then, you should be able to find commonality in the beginning, to sync up to. Tip: for this critical work, toggle the Snap feature OFF, with the S key.
Good luck,
Hunt

I have a new iPhone 5S. While trying to learn about it, I accidentally recorded a voice memo with no content. I cannot now figure out how to get rid of it. There is a banner across the top of my phone with this memo which I don't want. Help!

I have a new iPhone 5S. While trying to learn about it, I accidentally recorded a voice memo with no content. I cannot now figure out how to get rid of it. There is a banner across the top of my phone with this memo which I don't want. I have deleted it from iTunes but cannot get it off the phone. Help!

The banner usually indicates that the memo is "Paused." If you go back into voice memos, touch the word "Done" beside the big red pause button, give it a name, then it will show in a list. Touch the memo in the list then touch the trash can icon that should appear.

How to record DVB-S Stream with JavaTV/JMF ?

Similar Messages

Maybe you are looking for