How to record workcenter standard parameters in PP-general business process
Hi Experts,
Can u anyone have any idea to handle parameters such variable speed of the machine, temperature at which is operated ?....,etc
Regards,
Irshad
Check the parameters available in OP17, if they do not meet your need, then add a custom parameter.
Then define a forumla for your work center in OP21 using the paramters you defined.
If you need any further assistance then revert.
If helpful award points
Regards,
Vivek
Similar Messages
-
How to install the standard Cube 0PM_C09 in the Business content in BW ?
Hi ,
Experts,
Standard Cube *0PM_C09 is not available in the Cube.
Standard Cube 0PM_C09 is not exist int the Business content.
Suggest me what to do !!!!!!!!!!!!!!
Thanx.
AsitHi Asit,
Most probably you need to update the BI_CONT component in your system via SPAM.
Go for the latest SP available.
Regards,
Srikishan -
Standard/general business processes in US-(for DBM)
Hi all,
I need some in put on General business processes followed in IS-Auto-DBM (for US).
I found few in help.sap.com. Is all the processes used in US or give important BP in US
Thanking you
and Regards
ChidambaramHello!
Does nobody have any comments on this?
Regards, Tanja -
How to copy a standard search help to another field
Hi All,
I have a BSP screen in that for one input field i need to copy the standard search help for the Business Partner. Could any one guide me how to copy the standard search help for the business partner into the input field in the BSP screen.
Thanks In advance for the help...
Thanks,
SAP SAPHi,
the BP search is its own web client UI component. For the integration you could check any standard transaction UI component like the BT115H_SLSO, as those contain several partner fields.
Best Regards,
Michael -
How to choose 10g Standard Edition One.
Hi,
Does anyone know how to choose 10g Standard Edition One during the installation process ? There are only two type to choose: Enterprise and Standard Edition.
And is Standard Edition One defined by product or license ?
Thanks!Oracle Standard Edition:
Standard Edition is designed for smaller businesses and enterprises. It offers a subset of the features/ functionality implemented in Enterprise Edition. Database options like Data Guard, Partitioning, Spatial, etc. is not available with Standard Edition (from 10g one can use RAC with Standard Edition). Standard Edition can only be licensed on servers with a maximum capacity of four processors.
Oracle Standard Edition One:
Standard Edition One is a low cost, entry-level version of the Oracle Standard Edition database server. Standard Edition One can only be licensed on small servers with a maximum capacity of two processors.
Additional reading:
Oracle10g Database Licensing Guide
(Part of the Oracle 10g Documentation Set)
Oracle9i Database New Features Guide
Chapter 5: Database Feature and Option Availability
References:
Oracle Store
http://store.oracle.com/
~ Madrid -
How to change records in standard tables ?
how to change records in standard tables ?
HI,
If you are asking from program..Then you can use BDC or BAPI to update the records in teh standard tables..
OR
use the corresponding tcode to update the record
Thanks
Naren -
How to delete records from standard maintenance view
Dear Sir/Madam,
i want to delete records from standard view " v_mmim_rep_cust "
This is a standard maintenance view , used in MBLB report.
here i found the records with different report name but same fields as shown below...
REPORT TABLE NAME FIELD NAME
RM07DOCS MKPF BKTXT
RM07DOCS MKPF BLDAT
RM07DOCS MKPF BUDAT
RM07DOCS MSEG ANLN1
RM07DOCS MSEG ANLN2
RM07DOCS MSEG APLZL
YRM07DOCS MKPF BKTXT
YRM07DOCS MKPF BLDAT
YRM07DOCS MKPF BUDAT
YRM07DOCS MSEG ANLN1
YRM07DOCS MSEG ANLN2
YRM07DOCS MSEG APLZL
I WANT TO DELETE THE RECORDS FROM THE VIEW WITH REPORT = YRM07DOCS.
PLEASE HELP ME.
Thanks in Advance,
Dastagiri.Dear Sir,
when i did so , it displays a message that " entry mseg zeile must not be deleted ".
hense i went through writing a program to delete the records from table mmim_rep_cust
but it says that record not found.
program logic :
delete from mmim_rep_cust
where report in report
and TABNAME in TABNAME.
if sy-subrc = 0.
write ' RECORDS DELETED SUCCESSFULLY'.
else.
write ' RECORD NOT FOUND'.
endif.
please guide me to delete the records from the view.
Thanks in advance,
Dastagiri. -
How to change workcenter using bdc
hi,
can any one help me that how to change Workcenter while creating production order.
plz its urgent.
plzzzzzz
GowriGowri,
Before calling BDC upload u have to do the validations,So put a logic for which Items u have to change WC.
try to use any BAPI to overcome TC issue.
Sample program here.
data: str type c length 1,
var type c length 30,
cntr type i.
data: begin of record,
AUFNR(012),
FLG_OVIEW(001),
GLTRP(010),
GSTRP(010),
ARBPL(008),
KTSCH(020),
end of record.
DATA: itab LIKE record OCCURS 1000 WITH HEADER LINE.
PARAMETERS textfile LIKE rlgrap-filename DEFAULT
'c:\prdord.txt'.
End generated data section ***
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = textfile
filetype = 'DAT'
TABLES
data_tab = itab
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
OTHERS = 8.
IF sy-subrc <> 0.
WRITE:/ 'Upload From',textfile,'to itab is not successful'.
EXIT.
ENDIF.
LOOP AT itab.
IF sy-subrc <> 0. EXIT. ENDIF.
perform bdc_dynpro using 'SAPLCOKO1' '0110'.
perform bdc_field using 'BDC_CURSOR'
'CAUFVD-AUFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'CAUFVD-AUFNR'
itab-AUFNR.
perform bdc_field using 'R62CLORD-FLG_OVIEW'
itab-FLG_OVIEW.
perform bdc_dynpro using 'SAPLCOKO1' '0115'.
perform bdc_field using 'BDC_OKCODE'
'=TERM'.
perform bdc_field using 'BDC_CURSOR'
'CAUFVD-GSTRP'.
perform bdc_field using 'CAUFVD-GLTRP'
itab-GLTRP.
perform bdc_field using 'CAUFVD-GSTRP'
itab-GSTRP.
perform bdc_dynpro using 'SAPLCOKO1' '0115'.
perform bdc_field using 'BDC_OKCODE'
'=VGUE'.
perform bdc_field using 'BDC_CURSOR'
'CAUFVD-GAMNG'.
perform bdc_field using 'CAUFVD-GSTRP'
itab-GSTRP.
perform bdc_dynpro using 'SAPLCOVG' '0100'.
perform bdc_field using 'BDC_CURSOR'
'AFVGD-KTSCH'.
Here is where i need to check whether the 'AFVGD-KTSCH'containing value 'SEWING' then the itab value should be placed in the below screen-field.
perform bdc_field using 'BDC_CURSOR'
'AFVGD-ARBPL(02)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'AFVGD-ARBPL(02)'
itab-ARBPL.
perform bdc_dynpro using 'SAPLCOVG' '0100'.
perform bdc_field using 'BDC_OKCODE'
'=FREI'.
perform bdc_field using 'BDC_CURSOR'
'PSFC_DISP-AUFNR'.
perform bdc_dynpro using 'SAPLSPO2' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=OPT1'.
perform bdc_dynpro using 'SAPLCOVG' '0100'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'BDC_CURSOR'
'PSFC_DISP-AUFNR'.
CALL TRANSACTION 'CO02' USING bdcdata MODE 'A'.
if sy-subrc eq 1001.
write:/ ITAB-aufnr,ITAB-arbpl, ITAB-gstrp.
write 'Not Updated'.
else.
write:/ ITAB-aufnr,ITAB-arbpl, ITAB-gstrp.
write 'Updated Successfully'.
endif.
REFRESH bdcdata.
*else.
write 'Improper Text File Format'.
*endif.
endloop. -
How can I set limitations on how many records a report can return
I have a report on the web using Oracle Reports builder and I have the client enter in date parameters for the report that they want.
Well with date ranges for different clients a different number of records are returned. Because of time it can take the report to return I want to limit the number of records that report can return.
How can I go about doing that? I don't want to limit with date parameters because date won't really work for me. I need to limit on how many records can be returned. If it exceeds 10,000 records I want the client to refine the date range of schedule the report to run later. Meaning we will run that report. So I would have two check boxes if the count was over 10,000 do you want to define your date or schedule the job to run later.
Can any one help me with this? How would I go about this?To know if the report is going to return more than 10,000 records, you first have to run the query with a 'select count(1) from ... where ...' (with the same from and where clauses as you normal query). Since this takes about the same time as runnng your report, I wonder if you really gain anything (although formatting may take some time too).
You may simplify the select count(1) query by omitting all the lookup tables that are only needed for formatting. That way your query may run a lot faster. You can put this in your after parameter form trigger. -
How to define this FORMAL parameters for a std. SAP itab?
Hello Experts,
Am writing a custom PERFORM in a standard SAP include-RVCOMFZZ by using modification assistant, like below,
RVCOMFZZ:
PERFORM my_routine IN PROGRAM my_report USING com_vbapvb.
(here com_vbapvb is a TABLES parameter with STRUCTURE of vbapvb in the std. sap FM).
my_report:
FORM my_routine USING here_I_want_to_know_the_data_object
ENDFORM.
Here pls. let me know How to define the FORMAL parameters of my_routine? I tried with different options, but did not worked out. Preferable let me know in OOPS concepts (not using TABLES)
Thank youHi,
here is example how to write you structure content regardless what com_vbap has field list.
PERFORM my_routine IN PROGRAM my_report USING com_vbapvb.
FORM my_routine USING here_I_want_to_know_the_data_object.
field-SYMBOLS: <field> type any.
do 100 times.
assign COMPONENT sy-index of structure ls_VBAPVB to <field>.
if sy-subrc = 0.
write:/ <field>.
else.
exit.
endif.
enddo.
ENDFORM.
Bye Jan -
Hello,
I have searched TestStand reference manuals, help, and the forums, and I haven't yet found exactly how Parameters.Result should be used in callbacks (if at all).
I'm trying to figure out how to take a step that normally is not recorded in the result list, and force it to be recorded on the infrequent occasions that it fails. I'm thinking I should be using the Result, but I'm not sure how. If I set Parameters.Step.RecordResult = True then the step does get set to record results, but that seems to be permanent in the sequence file and AFTER the failure goes unreported.
Thanks in advance for your expert help!
- Gizmogal
Solved!
Go to Solution.In stepping through the SequenceFilePostResultListEntry I finally discerned the difference between Parameters.Step.Result and Parameters.Result, which is only visible at run time:
Parameters.Result has a TS container which refers to the current step, giving information such as StepGroup, StepName, StepType, among others. Its results-related properties are equivalent to the Parameters.Step.Result properties as far as I can tell.
Parameters.Step.Result has a much more extensive TS container of type TEInf which appears to be test executive information.
It seems kind of backwards from what I would expect, but there it is.
I'm partway through shifting my paradigm - recording all results and then discarding those not of interest. I ended up adding a status string "RecordAlways" to force some steps to be recorded every time, and I toss any that are not equal to that or "Passed", "Failed", "Error", or "Terminated". It's working pretty well so far.
Thanks again for your help!
- Gizmogal -
How to keep track of how many records to display in a page.
Hi All:
I am using Weblogic 9.2, Web Services Client, and Struts.
I have a java client in struts that calls a web services.
The "ID" field contains a Java integer.
The "First_Name" is a Java String.
The "Effective_Date" field is a Java date field.
The web service returns an arrayList of a class called Result.
Code for Result.java:
>
public class Result
int id;
String first_Name;
Date effective_Date;
public int getId
return id;
public void setId(int id)
this.id=id;
public String getFirst_Name()
return first_Name;
public void setFirst_Name(String first_Name)
this.first_Name = first_Name;
public Date getEffective_Date()
return effective_Date;
public void setEffective_Date(Date effective_Date)
this.effective_Date=effective_Date;
From the arrayList, I displayed the result as the following:
ID FIRST_NAME EFFECTIVE_DATE
3 John 9/10/2007
2 Andrew 1/11/2006
5 Peter 3/4/2006
The "ID" header is a link.
The "First Name" header is a link.
The "EFFECTIVE_Date" is a link.
If I clicked on the link "ID", the first time, it will sort the rows in ascending
order like the following:
ID FIRST_NAME EFFECTIVE_DATE
2 Andrew 1/11/2006
3 John 9/10/2007
5 Peter 3/4/2006
If I clicked on the link "ID", the second time, it will sort the rows in descending
order like the following:
ID FIRST_NAME EFFECTIVE_DATE
5 Peter 3/4/2006
3 John 9/10/2007
2 Andrew 1/11/2006
If I clicked on the "First_Name" field the first time, it will sort the rows in
desceding order.
If I clicked on the "First_Name" field the second time, it will sort the rows in
ascending order.
This applies the same for the "EFFECTIVE_DATE".
If the arrayList returns 80 records of class Results.java.
I needed to displayed only the first 50 records for the first page and 30 records for the second page.
How do I keep track of that so that when I am in the second page, I know to display only record 51 to 80?
If I have a arrayList that returns 120 records of class Results.java.
In the first page, it displayed only 50 records.
In the second page, it displayed only 50 records.
In the third page, it displayed only 20 records.
Assuming I am able to sort the rows by ID, FirstName and Effective_Date by using Results.java implementing the
Java Comparator class. Is it still possible to keep track of how many records displayed in the first page and how many records should
be dispalyed in the second page?
Any hint would be greatly appreciate.
Yours,
Frustrated.Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie -
[HELP] How to records user who use SQLPlus or SQL editor?
Dear Gurus,
Is onyone know how to record user who use SQLplus or any SQL editor?
for instance...
user1 using SQLplus on monday august 9.30.21 PM...and I have table which record this for audit user.
Or..
Can I block user who connect to oracle using SQLPlus?
If anyone know how to do this..please inform me...
Thanks and Regards
ErieYou can enable Auditing (AUDIT_TRAIL) and audit at the Session Level to record Logon and Log off of a required user. This can be enabled to be recorded in the audit table or operation system file. You can also audit user statements etc.
For example, to enable auditing connect for user UGONIC
SQL>audit connect by UGONIC;
TO disable it
SQL>noaudit connect by UGONIC;
Check in the SQL Reference for the AUDIT statement and requirements.
If you do not want the user to connect at all via SQL*Plus, you can use PRODUCT_USER_PROFILE to disable a users access to SQL*Plus or at the lower level, disable specified SQL*Plus and SQL commands for the user. You need to run the PUPBLD.SQL script as system user (if not run yet) and add records to it as required.
Example: After running PUPBLD.SQL. This entry stops the user UGONIC from using the drop command at the backend in SQL*Plus.
INSERT into product_user_profile (product,userid,attribute,char_value,date_value)
values('SQL*Plus','UGONIC','DROP','DISABLED',NULL);
Note that if a user is already connected by the profile entry, it is not activated on that session, but on subsequent logons. Again read the requied security documentations for this.
For both auditing, you need to set the required database intialisation parameters and know where to get the audit records (in tables, views or OS file). For instance, when using tables, you maintain and query tables like audit$ to view the logs. When using OS type logging, it is recorded on the path specified in the AUDIT_FILE_DEST init parameter (In Windows, it is logged in the Windows Event and you can view it from the event viewer). -
Hi,
How should I understand the parameters/argument values in the {} and [] right after a function?
For instance the {[Name="control"]}[Content] part in the
control=Excel.CurrentWorkbook(){[Name="control"]}[Content]
and also the [Control]{0} part in the periodctrl=control[Control]{0}.
Thanks.
Regards,The "[]" operator in M is like the "." operator in C-like languages, if that helps. It takes an aggregate value with named components and it selects one of those components. In the case of the record "Foo", "Foo[Bar]"
returns the field named Bar. In the case of the table "Baz", "Baz[Quux]" returns the column named Quux.
Similarly, the "{}" operator in M does subscripting of lists -- like the "[]" operator in C-like languages. If "Foo" is a list, then "Foo{0}" returns the first element of the list, "Foo{1}" returns the second
element of the list, and so on.
In the case of tables, it's also possible to use "{}" with a record argument, in which case it will return the row which matches the record criteria -- provided there is exactly one. So if "Foo" is a table, then "Foo{[Bar = 1]}"
will return the row for which the Bar column has a value of 1.
Many of the data access functions in Power Query return what we call "navigation tables". Sql.Database, for instance, returns a table with columns named Name, Schema, Object, Kind and Data. Each table in the database has a single entry in this
navigation table. When we index into the table with "table{[Schema="dbo", Object="table"]}", we're selecting the single row that matches those criteria. This gives us a record. We then want to pick the "Data" field of
that record, which contains the actual table data. That's why there's typically a "[Data]" at the end of expressions which fetch data from the SQL table. -
How much recording time on my iphone 4 voice memo?
How much recording time on iphone4 voice memo?
I would suggest that it depends on how much free space you have on the phone. I have done voice memos of over an hour before, and have read of other users reporting larger ones. I do not believe there is any documented source of what size you can do.
Maybe you are looking for
-
Help setting the behavior of a button, possible using a variable
Hi, This is my first time posting here and I'm sure I will be coming back, because I'm about to start a big project. The Problem: What I'm trying to do is get the user's input (text field = new_title), then having a button that will take that input a
-
my ipod nano is not being recognized by windows 7 when I now try to sync. Is the only way to fix this to uninstall and reinstall itunes and do I then have to redownload all my music?
-
Change in excise base amount in J1IEX in case of import PO
Hi, In case of import PO when we are making J1IEX ref. to MIRO number the excise base amount which is comin gin mIRO is different but all the Excise tax condition amount are coming properly. in one case in miro. CVD : 10% = 3950.70 Ecess =
-
Resolution of photos shared to FB with IOS 6?
Is there a way to specify the resolution of pictures uploaded directly to Facebook via the Share button in Photos on IOS 6? I shared a photo to FB, and when I downloaded it from FB, it had a resolution of 960x717. When I shared the same picture via
-
Email Notifications - can't turn off
I posted a thread and got an email notif because somebody posted a reply. I went to the thread and clicked on "Stop Email Notifications." I also went to Preferences and turned off notifications in two places. However, I again got an email today for a