How to Recover from last failed execution by using exported scripts

I have exported a Data Services batch job to unix scripts of job_batch.sh. The Enable Recovery option is selected when the job was exported. After I run the scripts (./job_batch.sh) and the job failed, I only can rerun it again using Recover-from-last-failed-execution option at Management Console.
Is it a way to rerun the job from last failed execution again from the scripts itself, not going through Management Console? Or have to rerun the scripts with any unix option to enable it to run from failed stage?
Thank you

In our world a recovery is done manually, hence no automatism there. In fact, there is some code that checks if the last run was unsuccessful and only in that case the Management Consol allows to add the "recover from last failed execution point".
Having said that, adding the command line property -Cr manually always, does work as Manoy explained.

Similar Messages

How to recover from a failed job?

A job that I submitted on a manged cluster of three machines has just failed.
I have five parts fine, but the last part failed with Quicktime error -6667 after 42 hours!
Is there any way to recover the job - I have the 5 complete segments - without rerunning the whole job again?
As a side note, I find it incredible beyond belief, that the cluster controller just exits the whole job instead of resubmitting the failing segment to another machine - it makes the whole Compressor thing look more like a technology demo than a working product.
That being said, the quality of frame rate conversion and deinterlacing is exceptional.

> I removed the contents of /sapdb, /sapmnt, /usr/sap,
> /etc/opt/sdb, and /tmp/sapinst_. The error log is right below....
delete also /usr/spool/sql and then try again.
Markus

How to recover from a failed Infospoke?

If an infospoke fails and the status is set to R'ed in the RSBREQUID3RD table, how do I set the status back to G'reen so that the spoke will run successfully again after the problem has been resolved?

> I removed the contents of /sapdb, /sapmnt, /usr/sap,
> /etc/opt/sdb, and /tmp/sapinst_. The error log is right below....
delete also /usr/spool/sql and then try again.
Markus

Recover from a failed Sound.load()

I've written a MP3 player for podcasts, and I am using the
Sound.load() to load the MP3 file from a URL. From time to time,
the download fails ... and an error occurs.
I am able to catch the error just fine ... but now what? How
do I restart the load? Or how do I recover from the failed
download?
Right now, I start the load, and also begin to play the sound
to the user ... so they can begin to listen. In some cases I have
seen the download of a 60 minute podcast fail at - maybe - 43:29.
So they are listening, and might be 10-15 minutes in ... I catch
the error ... and now what?
I can't seem to find any documentation on what to do at this
point ...

You could use a custom event. In your error handling code
dispatch your custom event, passing in something, like maybe the
path to file to be loaded, then try to reload. Everytime it fails
you will retry.

How to recover from disapled ipad

how to recover from locked ipad after wrong passwored trile

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808

How to recover from bad development of masterhead or layout or nav panel

Hi all:
I begin to modify framework of our portal, but I am new to it, my question is how to recover from bad development of masterhead or layout or nav panel, there is error in my development.
thank you very much for your reply

Hi,
ARe you able to access Content admin and system admin from your portal now?
What is the error its occuring.
Try to modify the rule collection to point to default desktop.
Best Wishes
Idhaya R

How to recover from a bad upgrade due to a blackout, stuck in the recovery itunes screen on the iphone

how to recover from a bad upgrade, due to a blackout. stuck in the recovery itunes screen on the iphone

Bjpolinda,
Do you have a recent iCloud or iTunes backup? If so, just plug your phone into iTunes, restore the phone and bring your backup back by following the prompts on the phone.
If you didn't back up your phone before attempting to update, you may have lost all your photos and other data on your phone. If you restore the phone through iTunes, it will most definitely wipe your phone of all data and reset it to factory settings.
Emmons

How to recover administrator password in windows 7 using usb

I have an HP netbook mini and need to how to recover administrator password in windows 7 using usb as we have forgotten and need to load itunes from another Iphone.
This question was solved.
View Solution.

Hi,
You could use a reset utility such as the free example on the link below - using another PC, this can be created on a usb flash drive.
http://pogostick.net/~pnh/ntpasswd/
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to recover my backups?? i used migration assistant but none of my old files showed up. I backed up daily and did a full disk back up twice.

how to recover my backups?? i used migration assistant but none of my old files showed up. I backed up daily and did a full disk back up twice

Open System Preferences and select Users & Groups. Assuming the migration was successful, you now have a new account - it was migrated. Migration Assistant doesn't copy files, it copies accounts. To see your documents you'll need to log into the account you migrated. (It has the same password it did on the other computer.)

How to set value for trim and bleed using jsx script?

I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
    var _saveOpts = new PDFSaveOptions();
    _saveOpts.printerResolution = 300;
    var bleedarray = new Array();
     bleedarray[0] =9.00;
     bleedarray[1]=9.00;
     bleedarray[2]=9.00;
     bleedarray[3]=9.00;
    _saveOpts.bleedOffsetRect = bleedarray;

I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

How to recover from Large Volume Table Insert

We are inserting 1 Million rows into table using ODI IKM Append. If half the way thru the job fails because of tablespace or other issue, how to recover? Does 50% rows are commited to db? What is the best way to handle this type of situation?

You can have different options for this.. You can commit them in every 1000 rows in the KM.You can also set the dml operation into one transaction and commit the same at the end of step.
Try to follow load plan for better restart options. If you cann't provide more undo table space then try loading less amount of records lets say 1 to 100,000 and then 100,001 to 200,000 like this which is little bit complex but you have to sacrifice something to overcome the issue.
I believe you must have data in C$ and I$ step. Hence you process these data instead of loading again from original source. So it depends on you, how you are going to design the total process. You can better judge it. Talk with your dba about this issues as well.
Thanks
http://bhabaniranjan.com/

How to recover from Oracle XA Error Native Error 24776?

Hello,
I believe that I have a connection leak somewhere and that an Oracle
connection is hung.
I get the following error when trying to access the data source
getConnection method.
How can I recover from this? The WL Server console shows 0 connections
to the connection pool, but obviously some are in there.
Thanks,
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error
has occur
ed in the transaction branch start() failed on resource 'Oracle Connection
Pool': XAER_RMERR : A resource manager error has occured in the
transaction bra
nch
javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
Error Occur
red. Native Error: 24776
at
weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
urceInfo.java:1075)
at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
sourceInfo.java:1007)
at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
ourceInfo.java:203)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
rverTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
250)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:305)

Steven ,
It's already been answered:
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&c2coff=1&threadm=4009ccc9%241%40newsgroups.bea.com&rnum=1&prev=/groups%3Fq%3D24776%2520OracleImplXAResource%26hl%3Den%26lr%3D%26ie%3DUTF-8%26c2coff%3D1%26sa%3DN%26tab%3Dwg
Regards,
Slava Imeshev
"Steven Ostrowski" <[email protected]> wrote in message news:40ce1480$1@mktnews1...
Hello,
I believe that I have a connection leak somewhere and that an Oracle
connection is hung.
I get the following error when trying to access the data source
getConnection method.
How can I recover from this? The WL Server console shows 0 connections
to the connection pool, but obviously some are in there.
Thanks,
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error
has occur
ed in the transaction branch start() failed on resource 'Oracle Connection
Pool': XAER_RMERR : A resource manager error has occured in the
transaction bra
nch
javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
Error Occur
red. Native Error: 24776
at
weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
urceInfo.java:1075)
at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
sourceInfo.java:1007)
at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
ourceInfo.java:203)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
rverTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
250)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:305)
[att1.html]

How to recover from D recovery drive that is not in the recovery point list

I got problem when I created a recovery point, this removed previous created or HP manufactory recovery.
then I use other tool make this recovery disk back. now because it is not in the recovery point, even though I can see the driver D, recovery is not work, what it said is access denied.
another problem is I alrerady update my notebook to Windows 8.1 Pro. would that default recovery back to Windows 8.1 Pro?

When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
The original factory installed operating system is what will be recovered to your computer, when you use the HP provided methods of recovering your computer. Try using the "F" key, associated with the HP Recover Manager, at power on. You may also try marking the "D:\HP Recovery" partition as active in the Windows Disk Management Console and rebooting the computer.
If the above didn't work and you didn't create your HP Recovery Media when you first setup your computer, please contact official HP Customer Support in your country / region, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer. Software may not be covered by the warranty and there may be a charge for the HP Recovery Media.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How to exit from the class execution process?

I am invoking an exe from my Java application using the Runtime.getRuntime().exec() method.
though the process is completed, the class is still running.
how do i exit from the class execution, but with the process still running??

To sabre150 :
I am directly executing the command through the exec() method:
Runtime.getRuntime().exec("...../iexplore.exe");This way, the control is going to the opened IE window and only on closing it, my class is exiting.
Is there any other way where I can come out of the class, but ensure that the process which i run through the exec() method, is still running?

Urgent solution to this problem "Attempt to reset display driver and recover from timeout failed"

Hi wonderful people at HP,
       I would be glad if you can solve this problem in my system. I want this to be urgent enough because I am graduating by March 1st 2011 and I want many things to be completed on my system.
       I have previously purchased warranty with hp for three times for tune out service, software and hardware help but nothing has been materialized, I am sorry to say but I just lost my money.
       My system, from the time of purchase, had the same persistent problem of overheating and also heavy noise, I told this to several people of HP but they never seem to respond properly. In fact my friend had a similiar problem in DELL and they responded promptly and sent him a new computer system. I don't know what to do. It will be ok if my system can function for one more month. I WOULD BE GRATEFUL TO YOU IF YOU CAN SOLVE THIS PROBLEM.
    Regards,
    KBPN

Re your 116 BSOD...
"It's not a true crash, in the sense that the Blue Screen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".
Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OS's like XP to crash.
As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.
If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.
If playing with video driver versions hasn't helped, make sure the box is not overheating.
Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.
Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.
If so, it might be as simple as dust buildup and subsequently inadequate cooling.
I would download cpu-z and gpu-z (both free) and keep an eye on the video temps
For more information please read this blog
http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557263%28v=vs.85%29.aspx
Advice offered in good faith. It is your decision to implement same.

How to Recover from last failed execution by using exported scripts

Similar Messages

Maybe you are looking for