How to recover from a bad upgrade due to a blackout, stuck in the recovery itunes screen on the iphone

how to recover from a bad upgrade, due to a blackout. stuck in the recovery itunes screen on the iphone

Bjpolinda,
Do you have a recent iCloud or iTunes backup? If so, just plug your phone into iTunes, restore the phone and bring your backup back by following the prompts on the phone.
If you didn't back up your phone before attempting to update, you may have lost all your photos and other data on your phone. If you restore the phone through iTunes, it will most definitely wipe your phone of all data and reset it to factory settings.
Emmons

Similar Messages

How to recover from bad development of masterhead or layout or nav panel

Hi all:
I begin to modify framework of our portal, but I am new to it, my question is how to recover from bad development of masterhead or layout or nav panel, there is error in my development.
thank you very much for your reply

Hi,
ARe you able to access Content admin and system admin from your portal now?
What is the error its occuring.
Try to modify the rule collection to point to default desktop.
Best Wishes
Idhaya R

How to recover from disapled ipad

how to recover from locked ipad after wrong passwored trile

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808

How to recover from network port configuration deletion (airport)

a couple of years ago, i accidently deleted the network port configuration for AirPort in the Show pop-up menu. No big deal, i thought at the time. I don't have an AirPort card and I won't be using AirPort in this computer. Ok, I now have an old-style AirPort card (powerbook G3 firewire, 10.2.8) and the AirPort utility doesn't see that it's installed. I realized right away, the network doesn't have a port... so the system doesn't see it, right? So, how do I get this port back? Do I have to reload a new System entirely and not save previous network settings... or is there an easier way to recover from my blunder?

Thanks Rob,
Glad to be here. Yeah, 10.2 works the same as 10.4. The problem with what you suggest is that I can no longer get airport as an option in Network port configs... so when I go to the new button all the other options are there EXCEPT AirPort. This is what I need to restore. I haven't checked, but I'm assuming I've nuked the pref panel out of the master library. So, I've messed up big time. I was looking for a way to recover that didn't involve reloading the whole system. This isn't like OS 9 and older where you can go and pick a little piece and stick it back into your system folder... I think. Thanks for the reply.

How to Recover from last failed execution by using exported scripts

I have exported a Data Services batch job to unix scripts of job_batch.sh. The Enable Recovery option is selected when the job was exported. After I run the scripts (./job_batch.sh) and the job failed, I only can rerun it again using Recover-from-last-failed-execution option at Management Console.
Is it a way to rerun the job from last failed execution again from the scripts itself, not going through Management Console? Or have to rerun the scripts with any unix option to enable it to run from failed stage?
Thank you

In our world a recovery is done manually, hence no automatism there. In fact, there is some code that checks if the last run was unsuccessful and only in that case the Management Consol allows to add the "recover from last failed execution point".
Having said that, adding the command line property -Cr manually always, does work as Manoy explained.

HT1491 how do i change over from the american itunes store to the Australian store?

How do i change over from the american itunes store to the Australian store? I was switched over when I was looking for something that was not available in the Australian store and now I cant get back.

I have the same problem, anyone got an answer?

HT1937 i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears The SIM card inserted in this iPhone does not appear to be supported This iPhone is not currently setup to work with carrier you're attempting to use. Please

i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears
The SIM card inserted in this iPhone does not appear to be supported
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.

It sounds like you or someone else hacked the phone to unlock it. Updating it locked it to the original carrier.
How did you unlock it? The ONLY legitimate way is to ask the carrier it is locked to to unlock it. Any other way requires hacking or jailbreaking the phone.

I have moved my iTunes library to a new Windows 7 PC and cannot transfer music from the new iTunes PC to my iPhone. The iPhone only accepts transfers from the original iTunes PC.

I have moved my iTunes library to a new Windows 7 PC and cannot transfer music from the new iTunes PC to my iPhone 4S. The iPhone will only accept music transfers from the original iTunes PC. I have come to understand that an iPhone can have only one "daddy" iTunes PC, but have not been able to find out how to change the "daddy". I have done a backup of the iPhone, and a "Restore to Original Settings". Then I restored the content using the new iTunes PC. My Apps and contacts, etc. are back on the iPhone, but it still won't accept music from the new iTunes PC.

What happens when you try to sync the iphone to the new computer?

How to add customize message on the variable selection screen in the query

Hi all,
Can we add an customise message on the variable selection screen in the query? If yes please let me know how it can be achevied?
Thanks,
Rani

Hi Rani,
I faced a similar issue (for what I understand your request is).
My requirement for the Variable Screen was to do:
1) place a link to a ppt file
2) remove buttons "Save", "Save As...), "Delete"... the standard buttons come when running the Query or WebTempl
We were using a Web Templ for BI7.0
I struggled trying to find out how to do it. My conclusions are:
- WAD, not sure we can accomplish it using a Web Template but i did not "play" a lot with the Web_Template Properties in order to know
- XHTML, I was told in my post HTML modification was the way, but I have close to nil background in HTML and couold not find the way of accessing the Variable Entry screen
For instance, I had to remove similar buttons and change some font size from a link on the Web Template (WAD), which was pretty straight forward. In WAD the buttons come with its own icon and to increase the Font size for that link we used XHTML (<font size="2" >). But the heck of the variable screen...well, i just did not get trhough to it to modify it in any way.
Good luck,
Definetly in a Query I would say that no.
alex
PS: If anyone had a better insight, please feel free to share it.

How do I get to the old iTunes screen...

How do I get to the old iTunes screen that used to pop up when I plug my IP into my MBA? I used to get a screen that showed whatever device I had hooked up.
This morning I got a message that there is an IP update, but that I have paid data on my IP that is not on my computer, do I want to install the update.
And the answer is no, not until I get whatever it is transferred to my computer. There used to be a pulldown menu asking "do you want to transfer programs from your device to iTunes?" Not there anymore or at least that I can find.
I suspect this problem has something to do with the cloud and automatic syncing between devices..

Kind of solved my own problem by updating the IP wirelessly (6.1.4). Then in plugging the IP into my MBA, I was able to get to the pull down menu that allows transfer of programs and apps to my MBA.
While I can see the advantage of being able to update the IP wirelessly, I much prefered the old iTunes interface that among other things, made it easy to "eject" the IP from being wired up to my MBA.

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

How can I sync my iPhone with the new iTunes without erasing my iPhone?

My iTunes computer crashed and I needed to format it. How can I sync my iPhone with the new iTunes without erasing my iPhone?

See this user tip ...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

HT201263 I see the "Connect to iTunes" screen and the device appears in iTunes. Everytime I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete

I see the "Connect to iTunes" screen and the device appears in iTunes. Every time I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete. I have a iPod touch 64gb. I have no idea what OS is on it now that iTunes has tried to recover it and erased all info.

Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
iTunes: Specific update-and-restore error messages and advanced troubleshooting

IPhone3G got stuck on connect to iTunes screen while doing upgrade iOS 4.2

Right after my iTunes 10.1 downloaded the iOS 4.2, it automatically started installing and sync-ing to my phone as usual.
It restarted itself, apple logo came out and ...
1. Stuck on "connect to itunes" screen eventough it was connected for the whole time. Unplugged it and plugged it back in, still got the same screen.
2. Neither my PC or itunes recognize it at all.
3. Unable to do soft reset but hard reset is ok. When i turn it on, the same screen comes out after the apple logo and got stuck until it turns itself off in about 30 sec.
3. Tried to connect it to the usb/itunes many different ways when the "connect to itunes" screen is on, but still got the same result.
4. Tried to do factory reset by holding the home button and connect it to the usb until the itunes recognize it, but still no luck (u can be sure on that it was properly done since it's not the first time i'm doing it).
FYI: the phone has never been serviced or customized.
Need some help ASAP here ppl. Please!
Message was edited by: Barsaa

I'm having the same problem too. I've been trouble shooting it based off advice from Apple's website and other people's information but so far nothing has worked. When I turn it on, it says connect to iTunes. I do. When I can get iTunes to recognize the iPhone is plugged in (which I seem to be able to only do when I stop and restart the Apple Mobile Device service), it says the phone is in recovery mode and has to be restored. I go through the process and so far it always stops on the "preparing iPhone for restore" process. Then I get the following error message ... the iPhone "iPhone could not be restored. An unknown error occured (1604). I seem to keep getting the 1604 and I haven't found a workable resolution yet for it.
If anyone could help, I would be so appreciative.

HT1296 on the "sync now" screen of my iphone 4, my old computer is listed as the one it needs to be plugged into. How do I change it?

How do I change to PC the "sync now" screen on my Iphone says it will sync to? Even when it is plugged in to the new PC it won't sync the checked only songs. It did transfer the songs when I set it up but it still says "syncing will begin when plugged into Lenovo-oe56c067"
I have tried a few different things...authorizing, deauthorizing the Lenovo, turning off sharing, turning off itunes match....I'm stumped

http://support.apple.com/kb/HT3965

How to recover from a bad upgrade due to a blackout, stuck in the recovery itunes screen on the iphone

Similar Messages

Maybe you are looking for