How to redirect after task approved?

Hi All,
I tried to redirect after task approved/reject like:
%Current Task:Form_URN%]&Source=http://sharepoint/sitename
This technique is working in dev site but not in production. Its redirects to task list only. Is there any other work around for this issue?
Thanks in advance!

Hi,
According to your post, my understanding is that you wanted to redirect after task approved.
In order to solve the problem more efficiently, can you descript more detail that how you create the workflow and where you add the action you mentioned?
In addition, please refer to the official article related, hope you could find something useful from it:
http://msdn.microsoft.com/en-us/library/ms772417.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Similar Messages

How to: Redirect after document adding to a sharepoint document library

i need to redirect the current user to a custom url after successfully uploading a document.
the user clicks "+ new document" in the document library
the user selects a local document
the document gets uploaded and in that moment after it is successfully uploaded and the item is created in the list, i want to redirect the user to a custom url
Normally after successfully uploading a document to a document library under SharePoint 2010, the user gets a modal dialog where he sees only the field "Name" with the filename.
I want to prevent this. How could i achieve this?
best regards
Yavuz

Thanks for the replies, but that is not i was searching for.
For example:
the user clicks "+ new document" in the document library
the user selects a local document
the document gets uploaded and in that moment after it is successfully uploaded and the item is created in the list, i want to redirect the user to a custom url. On my system i get the Edit.aspx form ->
i don't want this!!
Normally after successfully uploading a document to a document library under SharePoint 2010, the user gets a modal dialog where he sees only the field "Name" with the filename.
I would like to do this inside an eventreceiver.
After the document is successfully added to the library i would like to redirect the user directly to another page.
I hope this clearifies my problem :)

Redirect After Logout

Hi,
I have created several example public pages each containing the Portal 9.0.2 out-of-the-box Login portlet.
Depending on which page I use to login from, when I logout, I would like to automatically return to the same login page.
In Portal Rel 1, this was simply a case of setting the p_done_url value to that of the required login page.
However, in Rel 2, logout first takes you to the default logout page (the one confirming logout from various partner applications), where you are then required to manually click RETURN, at which point, the correct login page is displayed.
I have read various threads both from this forum and metalink, and each suggests looking in the SSO Admin Guide. However, this explains how to replace the Logout page, not how to redirect after logout. If I use the method described in the SSO Admin Guide, I can only have one logout page. This would mean that I would not be able to replicate the Rel 1 functionality, where I could go to a different login page each time after logout.
Does anyone out there know how to replicate this Rel 1 functionality?
Thanks in advance for all help received.
Regards,
Gillian

Hi Anupam,
This is a copy of the single sign-off file, ssoff.jsp:
<html>
<body bgcolor="white">
<%@ page buffer="5" autoFlush="true" %>
<%
response.setHeader("Cache-Control", "no-cache");
response.setHeader("Pragma", "no-cache");
response.setHeader("Expires", "Thu, 29 Oct 1970 17:04:19 GMT");
String done_url = null;
int i = 0;
try
done_url = request.getParameterValues("p_done_url")[0];
out.println("<center><h1>Single Sign-Off</h1><p>");
out.println("<table border=0>");
out.println("<tr>");
out.println("<th>Appliction Name</th>");
out.println("<th>Logout Status</th>");
out.println("</tr>");
for(;;)
i++;
String app_name = request.getParameterValues("p_app_name"+i)[0];
String url_name = request.getParameterValues("p_app_logout_url"+i)[0];
out.println("<tr>");
out.println("<td>"+app_name+"</td>");
out.println("<td><img src='" url_name "'></td>");
out.println("</tr>");
catch(Exception e)
if(i>1)
out.println("</table>");
out.println("<br>");
response.sendRedirect(done_url);
else
out.println("<h2><center><font color='red'>ERROR:</font>");
out.println("This page can not be accessed directly!</center></h2>");
%>
</body>
</html>
When I now logout from the portal, this page is called as expected, but the logout process is not executed nor does the redirection take place. Any pointers??
Thanks,
Gillian

How to disable the edit Permission after the task approval in project server 2010.

Hi ,
Can this be done.
How to disable the edit Permission after the task approval in project server 2010.
I mean How to Disable approve/Reject Permission Once task approved in project server 2010.
Any Help Would be more than Welcome.

Hi Rohan,
Just talking about the tool capabilities, preventing a task approver (status manager) to approve/reject updates once he has already approved once is not possible out-of-the-box. You grant permissions to user: if you grant a user to approve task updates then
he has the permission to approve updates, no matter if it is the 2nd or 3rd time the task is approved or rejected.
Then of course you could do not custom development to do that.
I'd say that in order to help you, we would need to understand a little bit more your business need. Why do you need to achieve such a goal? We can surely propose you workaround.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How to redirect a JSP page after the session is killed

Hello!
I am quite new to JSP. I have a question about how to redirect a jsp page after the session is killed. Could anyone help?
thanks a lot in advance!

You can't, directly. There's no connection betweenthe server and browser.
even after invalidating the session. we can do it
directly using the statement
response.sendRedirect("....");
or we can use the meta refresh tag.if session is invalidated and if we try to do response.sendRedirect(".. ") it throws IllegalStateException

Approval Workflow - How to stop Approval Process after one Approve?

I currently have a approval workflow for announcements. There are two approvers assigned to the workflow with the serial setting. How do I end the approval work process after one of the two persons approve? Currently, if one person approves, I have a "In
Progress" status under the status column.
Here is the text-based editor view of my workflow:
f Current Item:Body not equals Current Item:PriorBody
Start Approval process on Current Item with User1; User2
Else if Current Item:PriorWorkflow equals Approved
Set workflow status to Approved
If Current Item:PriorWorkflow equals Rejected
Set workflow status to Rejected
Any tips are welcomed. I have found that Nintex released a workflow that addresses this, but I would like to work around that if possible.

Hi David,
Yes, I created the workflow based on SharePoint 2013 Workflow platform. You can have a look at the screenshoot:
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How can we send workitem after Po approval decision has been taken by appro

Hi.
How can we send workitem after Po approved decision has been taken by approver1 to approver2 in the same flow?
Regards,
Chow.

Some kind requests from a user who is of a different opinion:
Please create one thread for each different question, with a precise thread subject. It will make it easier to search for previously answers to the question someone has, and it will help keep each thread short.
Please do not introduce new questions on an entirely different topic in an existing thread.
Please always check if your answer has been answered already before you start a new thread.
Please do not ask the same question twice just because you did not receive an answer when you asked it first. Post a follow-up to your first thread if you want to make everyone aware that you are still looking for help to solve your problem.
Please mark questions as answered when you either have reiceived the answer, or solved the problem. It is also nice if you leave a little comment about how the problem was solved.
I guess that was all for today...

Podcast logo how long does it take to effect after being approved

my podcast has been approved and the Url was accessible but why my logo is not reflecting? how long does it take to effect after being approved?
https://itunes.apple.com/ca/podcast/toronto-gospel-ministries/id712382987

It can take quite a long time, but in your case your logo is now visible.

How to redirect to different page after login in APEX 4.1

Dear All,
Here my Requirement is,When the users login,
when they entered their username and password and pressed login button,
they have to redirected to different pages based on the type of user.
Here my LOGIN_TABLE has following 3 columns,
1.Username
2.Password
3.Type.
The TYPE has 2 values, employee and admin.
when the type is admin they should be redirected to page 2,
reaining i.e employee users has to be redirected to page 3.
How can I do this? please give some suggestion.
Thank you.
regards,
Gurujothi

Dear Christian,
Thank you for your reply,
I would like to explain something,
When I using the following function,
*create or replace FUNCTION custom_auth_g (
p_username IN VARCHAR2,
p_password IN VARCHAR2)
RETURN BOOLEAN IS
BEGIN
FOR c1 IN (SELECT 1
FROM login_table
WHERE upper(username) = upper(p_username)
AND upper(password) = upper(p_password))
LOOP
RETURN TRUE;
END LOOP;
RETURN FALSE;
END;*
When login, It checks in the login_table table and if the username is exist with the pass word it successfully entered inside the application.
for all users only one page which we set.
My Login_table also contains type which has 2 type as I mentined above.
But As I mentioned earliar based on the user type it has to be redirected to 2 different page.
I found this Package but I cant understand,Can you please Explain?
*create or replace PACKAGE app_security_pkg
AS
PROCEDURE add_user
p_username IN VARCHAR2
,p_password IN VARCHAR2
PROCEDURE login
p_uname IN VARCHAR2
,p_password IN VARCHAR2
,p_session_id IN VARCHAR2
,p_flow_page IN VARCHAR2
FUNCTION get_hash
p_username IN VARCHAR2
,p_password IN VARCHAR2
RETURN VARCHAR2;
PROCEDURE valid_user2
p_username IN VARCHAR2
,p_password IN VARCHAR2
FUNCTION valid_user
p_username IN VARCHAR2
,p_password IN VARCHAR2
RETURN BOOLEAN;
END app_security_pkg;*
*create or replace PACKAGE BODY app_security_pkg
AS
PROCEDURE login
p_uname IN VARCHAR2
,p_password IN VARCHAR2
,p_session_id IN VARCHAR2
,p_flow_page IN VARCHAR2
IS
lv_goto_page NUMBER DEFAULT 1;
BEGIN
-- This logic is a demonstration of how to redirect
-- to different pages depending on who successfully
-- authenticates. In my example, it simply demonstrates
-- the ADMIN user going to page 1 and all other users going
-- to page 2. Add you own logic here to detrmin which page
-- a user should be directed to post authentication.
IF UPPER(p_uname) = 'ADMIN'
THEN
lv_goto_page := 1;
ELSE
lv_goto_page := 2;
END IF;
APEX_UTIL.SET_SESSION_STATE('FSP_AFTER_LOGIN_URL');
wwv_flow_custom_auth_std.login
p_uname => p_uname,
p_password => p_password,
p_session_id => p_session_id,
p_flow_page => p_flow_page || ':' || lv_goto_page
EXCEPTION
WHEN OTHERS
THEN
RAISE;
END login;
PROCEDURE add_user
p_username IN VARCHAR2
,p_password IN VARCHAR2
AS
BEGIN
INSERT INTO app_users (username, PASSWORD)
VALUES (UPPER (p_username),
get_hash (TRIM (p_username), p_password));
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
RAISE;
END add_user;
-- Function to Perform a oneway hash of the users
-- passwords. This cannot be reversed. This exmaple
-- is a very week hash and if been used on a production
-- system, you may want to use a stronger hash algorithm.
-- Read the Documentation for more info on DBMS_CRYPTO as
-- this is the supported package from Oracle and
-- DBMS_OBFUSCATION_TOOLKIT is now depricated.
FUNCTION get_hash (p_username IN VARCHAR2, p_password IN VARCHAR2)
RETURN VARCHAR2
AS
BEGIN
RETURN DBMS_OBFUSCATION_TOOLKIT.md5 (
input_string => UPPER (p_username)
|| '/'
|| UPPER (p_password));
END get_hash;
PROCEDURE valid_user2 (p_username IN VARCHAR2, p_password IN VARCHAR2)
AS
v_dummy VARCHAR2 (1);
BEGIN
SELECT '1'
INTO v_dummy
FROM app_users
WHERE UPPER (username) = UPPER (p_username)
AND PASSWORD = get_hash (p_username, p_password);
EXCEPTION
WHEN NO_DATA_FOUND
THEN raise_application_error (-20000, 'Invalid username / password.');
END valid_user2;
FUNCTION valid_user (p_username IN VARCHAR2, p_password IN VARCHAR2)
RETURN BOOLEAN
AS
BEGIN
valid_user2 (UPPER (p_username), p_password);
RETURN TRUE;
EXCEPTION
WHEN OTHERS
THEN RETURN FALSE;
END valid_user;
END app_security_pkg;*
And you said "assign an URL to FSP_AFTER_LOGIN_URL, depending on the Type column",
Where to assign,Could you please Explain?
Thank you.

HOW TO CONFIGURE MANAGER or APPROVER USER IN ACCESS REQUEST MANAGEMENT TO APPROVE OR REJECT REQUEST

hi sap gurus,
i configured grc 10 system successfully. I created one user: GR_AR_APP001 and assign following roles:
SAP_GRAC_ACCESS_APPROVER
SAP_GRAC_ACCESS_REQUEST_ADMIN
SAP_GRC_FN_BASE
SAP_GRC_FN_NUSINESS_USER
and I maintained GR_AR_APP001 in access control owners as "POINT OF CONTACT", "SECURITY LEAD" and "WORKFLOW ADMINISTRATOR"
but when i am creating access request for new user and defining MANAGER under user details tab as GR_AR_APP001.
the user GR_AR_APP001 is not receiving any request for APPROVE or REJECT in his WORK INBOX.
can u please guide me how to configure APPROVER or MANAGER to approve or reject request.
I will be very much thankful if you guide me successfully.

Hi Colleen,
thanks a lot for your time.
PIC1: I created one user: GR_AR_APP001
and assigned all the GRC ROLES.
PIC2: I assigned owner type to GR_AR_APP001 user : POINT OF CONTACT, SECURITY LEAD and WORKFLOW ADMINISTRATOR in NWBC ACCESS CONTROL OWNERS
PIC3: I created one EUP 980 (copied from default EUP)
PIC4: I maintained default manager as GR_AR_APP001 user in 980 EUP
PIC5: I selected SAP_GRAC_ACCESS_REQUEST process id
PIC6: I created one agent id as ZGRAC_MANAGER11 in which I added approver user id: GR_AR_APP001
PIC7: I saved agent id
PIC8: I added agent id as ZGRAC_MANAGER11 in stage5 in manager stage.
PIC9: I saved
PIC10: I maintained EUP 980 (in which I configured manager as GR_AR_APP001 user) in stage 5 task settings
PIC11: Maintain Route Mapping, I clicked on next
PIC12 and PIC13: I saved and activated.
After this process I created one request for new account and selected the manager as GR_AR_APP001 and one request is created with request no 9000000030.
now I logged into system by user GR_AR_APP001 and checked, there is no request under his work inbox.
please guide me at least one procedure, how to receive request in approver work inbox so that I can learn other procedures to configure approver as per our organization requirement.
thanks for your support Colleen.

How to display swf in full screen mode and how to redirect to a url

Hi,
I have 2 questions :
Question 1 - I have a flash swf file and I want to display it in the browser in full mode meaning it should fit the browser, I have tried adding
fscommand("fullscreen", "true");
in the first frame of a lyaer but it does not work.
Question 2 - How to redirect to another page at the end of the swf movie, I have tried adding :
stop();
navigateToURL( new URLRequest("*www.microsoft.com*"), "_self");
in the last frame but it does not work.
Thank you very very much for your assitance !!
Terry

"fscommand("fullscreen", "true");" only works for self-running executables, not embedded SWFs in a web page.
To get the swf to fill the browser page, the best thing to do would be to adjust the publish settings of the "HTML Wrapper" page and copy the necessary pieces from the resultant HTML file into the HTML file you are putting the swf into.
I have had some successes dealing with similar navigation issues by breaking up the code into multiple tasks:
var url:String = "http://www.microsoft.com";
var urlReq:URLRequest = new URLRequest(url);
navigateToURL(urlReq);
I can't guarantee that will help, but at least I tried. :-)

How to redirect to other page in a dialogListener?

Hi All,
I am using JDeveloper 11g with ADF BC.
How to redirect to another page from a dialogListener of <af:dialog>?
I have a page with a [Delete] button on it. When user click on the delete button, a confirmation dialog will appear to ask "Are you sure? [Yes/No]". If user answer [Yes], I will delete the current record, and go to another page. I can call a Operation Binding in the dialogListener, but I don't know how to go to another page.
public void handleDeleteDialog(DialogEvent dialogEvent) {
OperationBinding operationBinding = bindings.getOperationBinding("Delete");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
// redirect to another page?
Regards,
Samson Fu

Hi Samson,
Check following link for your query:-
Re: page has to navigate to the next page when clicking button in the popup
You can also make usae of Navigation Handler to invoke the navigation action in your task flow as
FacesContext facesCtx = FacesContext.getCurrentInstance();
NavigationHandler nh = facesCtx.getApplication().getNavigationHandler();
nh.handleNavigation(facesCtx, "", "ActionNameInTaskFlow");
Vikram

How to redirect users to Custom Page on InfoView logoff

Post Author: Srinivas123
CA Forum: WebIntelligence Reporting
How to redirect the users on InfoView logoff to a custom page, instead of the default logon.aspx.

Hello Senana,
Assuming you're using wwv_flow_custom_auth_std.login to log in, and p_flow_page is set to "[your app id]:1" try placing the following line just before your call to wwv_flow_custom_auth_std.login:
:FSP_AFTER_LOGIN_URL := null;This should force user to page 1 after log-in.
Hope this helps,
John

How to change the Task title on runtime?

Hi experts again,
My customer is struggling with something very simple: how to customize the Task title. You can certainly create an argument in the task, use Data Associations to map the argument, and then use XPath expression to get the value from the task payload and set it to the task title. That works fine. But it only executes once, when the process instance 'enters' in the task.
So once the Task is created, you can see the custom title in the Workspace.
Now, can we change the Title on runtime? I thought you could get the task payload, update the title and finally update the task but this does not seem to work. Here's the code that does it.
In this example, the priority is updated successfully but not the title.
FacesContext context = FacesContext.getCurrentInstance();
String tskId = (String)context.getApplication().evaluateExpressionGet(context,
"#{pageFlowScope.bpmWorklistTaskId}", String.class);
IWorkflowServiceClient workflowSvcClient = WorkflowService.getWorkflowServiceClient();
ITaskService taskSvc = workflowSvcClient .getTaskService();
ITaskQueryService wfQueryService = workflowSvcClient.getTaskQueryService();
IWorkflowContext wfContext = WorklistUtil.getWorkflowContextForASelectedTask();
Task myTask;
try {
myTask = wfQueryService.getTaskDetailsById(wfContext, tskId);
Element payloadElem = myTask.getPayloadAsElement();
System.out.println("****************" + myTask.getTitle());
System.out.println("****************" + myTask.getPriority());
myTask.setTitle("Task Title 3");
myTask.setPriority(2);
myTask.setPayloadAsElement(payloadElem);
taskSvc.updateTask(wfContext, myTask);
} catch (Exception e) {
e.printStackTrace();
The results which printed out in console after execute above code twice.
****************Task Title 1
****************3
****************Task Title 1
****************2

You can use the appropriately named Window Title property. In your project you can define conditional disable symbols (right-click on the project node and select Properties) and then use a conditional disable structure in your code. However, these symbols apply to the entire project, not to a specific executable. Thus, a better route would be to use the executable name (also accessible via a property), if possible, or some other distinction between the executables. What makes the executables different?

How to use two tasks in Workflow

Hi Everybody !
Can Any one tell me, How to use two tasks in one activity step type of Workflow CRM?
My requirement is... I have to execute two tasks in single activity step in Workflow. Is it possible.if it is possible tell me the flow Please.
Thanks in advance.
Raghava Vakada.

You can define one as a "Before" or "After" method if that is usable for you. (defined in tab Methods for Activity steps)
Otherwise there is also the step flag "Advance with dialog" (tab Details on Activity steps, but the tab it is found on depends on your version) which allows one user to seamlessly execute two consecutive tasks.
So depending on your real need there may be several options available. If all that is needed is that the same user can execute the two tasks then Advance with Dialog is perhaps the best choice. If the user then cancels execution of the second activity the work item is available for execution. If you define an After method and the user cancels execution the work item has still been completed since its (main) method has been completed.

How to redirect after task approved?

Similar Messages

Maybe you are looking for