How to reformat a 8320 back to when you 1st got it?

How to reformat a 8320 back to when you 1st got it?
Solved!
Go to Solution.

To wipe the device go into Options | Security Options | General Settings. Hit your menu key, and select Wipe Handheld.
Just note that doing so will erase all your data from the device. So if you want a backup, you can install the Desktop Software and use the Backup and Restore utility to backup all your data first, then perform the wipe.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

  • When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event.  Now it shows only one photo at a time.  How do I get it back? Can you help?

    When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event.  Now it shows only one photo at a time.  How do I get it back? Can you help?

    On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
    Regards
    TD

  • HT5622 When I was update free OS update I was charged 60 INR four times, I don't how to claim my money back. Could you please help to get my money back?

    When I was update free OS update I was charged 60 INR four times, I don't how to claim my money back. Could you please help to get my money back?

    Did you add or change your credit card details on your iTunes account when downloading them ? If you have then each time that you do so a small temporary store holding charge may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
    Store holding charge : http://support.apple.com/kb/HT3702

  • When I went and connected  phone to my laptop and hit restore and it got rid of everything my photos my contacts everything and I don't know how to get the stuff back and if you need to know I have an IPhone4S

    When I went and connected my phone to my laptop and hit restore and it got rid of everything my photos my contacts everything and I don't know how to get the stuff back and if you need to know I have an IPhone4S

    I take it you were replacing an older iPhone and this was the first time you plugged it in? If so, that's what happens. It restored the backup of your old phone. A backup of the current phone is not made in those circumstances.
    If that's not what happened, you need to clarify.

  • Before plugging my phone to itunes i downoaded three songs, but they are no longer on my phone, How do i get them back because when i go to itunes on my phone it says purchased but the song arent present

    before plugging my phone to itunes i downoaded three songs, but they are no longer on my phone, How do i get them back because when i go to itunes on my phone it says purchased but the song arent present

    Reset my homescreen settings and got it to work. Thanks

  • How to change your Administration Server password when you're locked out

    How to change your Administration Server password when you're locked out
    The Netscape server products are all managed by a single administration
    server, which gives you a web forms-based interface you can use to
    configure them, start/stop them, check their logs, and so forth.
    <P>
    There are three levels of protection that keep the general public from
    being able to get into your administration server and mess up the
    configuration of any Netscape servers you have installed:
    <P>
    <OL>
    <LI> <B>Obscurity:</B> Your administration server can run on any port you'd
    like (usually something between 81 and 30,000), so if an attacker
    doesn't know what port to find your admin server on, he can't get
    into it.<P>
    <LI> <B>Host restrictions:</B> You can tell your admin server to only allow
    connections from specific hosts, and to reject all other hosts.
    <P>
    <LI> <B>Password protection:</B> Even if a user connects to your admin server
    from a valid host, he won't be allowed to get into even the first
    page unless he presents a valid username and password.
    </OL>
    <P>
    If you, the legitimate administrator of your web server, are unable to
    access the administration server (if you forgot your password or the
    admin port number or if you accidentally locked your own site out),
    then here is how to get past each of these levels of protection:
    <P>
    <OL>
    <LI> If you don't remember what port your administration server is
    running on, just look in your "ns-admin.conf" file, which is in
    the "admserv" directory under your Netscape server directory.
    (For 1.x web servers on Windows NT, run "regedt32" and go to the
    "HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
    You will see a "Port" entry there that specifies what port your
    admin server is on. You can change this value if you want your
    admin server to run on a different port, but make sure you restart
    the admin server after you change the value.
    <P>
    <LI> If your admin server is complaining "Unauthorized host" when you
    try to connect to it, then you can open it up to all sites by
    going into the "ns-admin.conf" file or the "Administration"
    section of your NT registry, as described above, and deleting the
    lines for "Hosts" and "Addresses" (either one of those might not
    be present) then restarting your admin server (on Unix run
    "stop-admin" then "start-admin"; on NT go into the Services
    control panel and stop/start the "Netscape Administration" or
    "Netscape Admin Server" service). You will then be able to get
    back into the admin server, where you can then try new settings
    for your host and address restrictions if you wish.
    <P>
    <LI> If you have forgotten the password to your admin server and now
    you can't log into your admin pages, all is not lost! Go into
    your "ns-home" directory, and into the "admserv" directory under
    that. You should find an "admpw" text file containing a simgle
    line of text, something like this:
    admin:lnOVeixulqkmU
    The first part of that line is the name of your admin account
    (usually just "admin"), and the second part is your admin
    password, encrypted. Edit this file to remove the encrypted
    password so that your file looks like this:
    admin:
    Then shut down your admin server, bring it back up again, and log
    into your admin server but don't give any password. It should let
    you in, at which point you can then go to the appropriate
    configuration page to set a new admin password, and then you're
    back in business.
    </OL><P>
    Note that because it is so easy to change the admin password this
    way, it's good to periodically make certain that your admin
    password file and your web server's configuration files are not
    left world-writable, and that only trusted people have access to
    them. (By default they're not world-writable, but it's good to
    make sure of this from time to time.)

    If you mean that yu forgo the password for yur encrypted backup then you can only:
    Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
    If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
    Above from:
    http://support.apple.com/kb/HT4946

  • I accidentally removed my Downloads Folder from my Dock.  How do I get it back?  Thank you.

    I accidentally removed my Downloads Folder from my Dock.  How do I get it back?  Thank you.

    Charlie,
    Thank you.  Much appreciated.  I do have an additional question... when I tried to follow your folloiwng guidance..
    "One way to go to your home folder is to select "Got to Folder..." in the Finder Go menu and enter a tilde (~), then press return."
    I couldn't make it work no matter how I entered it.  Maybe I don't understand what you mean by the (~).  I'm a novice as you can probably already tell.   - Terry

  • Do text messages not back up when you save to ICloud?

    do rext message not back up when you save and restore to ICloud

    The backup should contain text messages.  The backup includes (from http://support.apple.com/kb/PH12519):
    Photos and videos in your Camera Roll
    Device settings
    App data
    Home screen and app organization
    iMessage, text (SMS), and MMS messages
    Ringtones
    Visual Voicemail

  • How to make a rubber effect like when you swipe between apps using 4 fingers on iPad ?

    Hey guys,
    So how to make a rubber effect like when you swipe between apps (first or last app) using 4 fingers on iPad iOS7 ? Any examples ?
    Thanks!
    Ivan

    Please do not double post the same question.
    Just like I said before. Animate X scale and position. Set the anchor point of the left image to the left side. You can then use an expression or just generate keyframes for scale. When you flip to the next screen then animate position. Easy basic animation except for the bounce. Key framing the bounce so that it looks natural takes a lot of experience or an expression.
    Google bounce expression after effects and find this. http://www.motion-graphics-exchange.com/after-effects/Wiggle-rubber-bounce-throw-inertia-e xpressions/4ad0f32a944ad
    There are a bunch of other solutions.
    There is no single click solution to this problem and it is not an effect, it is an animation.

  • How the upgrade to Creative Cloud happens when you are already a signed member of Typekit?

    Hello everybody. I have a signature for Typekit. When I purchase a Creative Cloud the price I had payed is discounted? How the upgrade to Creative Cloud happens when you are already a signed member of Typekit?
    Thanks

    Hi rogeriovelloso,
    This page explains how your Typekit account may change if you sign up for a Creative Cloud subscription:
    http://help.typekit.com/customer/portal/articles/529513-link-an-existing-typekit-account-t o-a-new-creative-cloud-subscription
    Please let me know if you have any other questions, here or at [email protected]!  Best,
    -- liz
    Typekit Support

  • What happens in the back ground when you schedule a Sales Order?

    Gurus,
    What happens in the back ground when you schedule a Sales Order?
    Assemble to Order scenario.
    Edited by: 792050 on May 17, 2011 3:24 AM
    Edited by: 792050 on May 17, 2011 3:24 AM

    If I merge libraries and then back the merged libraries up onto an external drive or DVD, do I just back up the libraries themselves, or do I also back up the original files?
    If you're running a Managed Library, then backing up the Library also backs up the original files.
    I ask because my HDD is getting pretty full. I want to reduce the amount of stuff on it, and the iPhoto libraries are the biggest single consumer of space at the moment (Nearly 100GB).
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD
    P.s. If you're running a Managed library, then it's the default setting, and iPhoto copies files into the iPhoto Library when Importing
    If you're running a Referenced Library, then you made a change at iPhoto -> Preferences -> Advanced and iPhoto is NOT copying the files into the iPhoto Library when importing.

  • HT2736 How long until a redemption code appears when you choose now to send the gift?

    How long does a gift code appear when you choose now to send it?

    In a real time.

  • Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

  • I lost my ihone,how can I find it back?Can you help me?Thanks!

    Hi~
    I lost my ihone,how can I find it back?Can you help me?Thanks!
    Sky

    If you set up find my iphone on the iphone itself and it is on and it has note been found and restored, then you may be able to locate it using icloud.
    Otherwise you find it as you would find anything else:  look for it

  • Is anyone having problems playing music on their iPhone? At times, particularly when you've got headphones in songs sound like a badly scratched CD, continually skipping in various sections of the song. Problem occured post-IOS 5 update.

    Is anyone having problems playing music on their iPhone? At times, particularly when you've got headphones in songs sound like a badly scratched CD, continually skipping in various sections of the song. Problem occured post-IOS 5 update.

    Is anyone having problems playing music on their iPhone? At times, particularly when you've got headphones in songs sound like a badly scratched CD, continually skipping in various sections of the song. Problem occured post-IOS 5 update.

Maybe you are looking for

  • Trying to show/hide a region based on other DB content

    I am trying to get a date to show or hide based on the content of another date within the same record, but I don't know how to write the code for the bold compare bit of the show if, the bit after the !== Here's the code I have:         <?php if ($ro

  • "weather has been running in the background"

    My iPad said "weather has been running in the background," but las I checked iPad didn't come with the "weather" app. What's the deal?

  • Not showing Currency Code on Print Layout

    Hi to everyone, Is there a possibility not to show the currency code on the document layout, ie, when printing document Thanks Kentish

  • Weblogic patch for the "Authentication for user wlsadmin denied" issue

    Hi Everyone, When I try to login to the weblogic console using the weblogic user id and password, I got below issue in the production server..Sometime back I saw a thread that Oracle has provided a patch for this issue. If any of you is aware of it t

  • Flash cs3 trial not validating

    Hello all, MX4 licensee here trying to install flash cs3. tried on two separate partitions on the same machine...same result......a message saying that there is a problem loading the trial version...and I cannot get past that to even open the program