How to register and keep track on item packaging during transactions

Hi,
I have items which I receive in inventory under different packaging. I want that when I receive or issue it from the warehouse, I keep track also on the packaging that the transaction is done.
E.g. Oil for vehicle engine:
Item parameters: "10x40"
Manufacturer: Elf
I receive:
100 liters, 100 pieces, package: 1 liter.
500 liter, 100 pieces, package: 5 liter.
I want to know that I have in total 600 liters of Oil 10x40 of manufacturer Elf and from the other hand I want to know how many pieces of 1 liter and how many of 5 liters I have.
Please help me to configure this in INV module.
Thank you.

Hi Glen,
Thanks heaps for your reply! Sorry I am so slow to implement it, send it to my client, and then realise it is borked still! I went with the storing the ICalUid (which I think IS the CleanGlobalObjectId you mentioned after I dissected the blogs you
posted) in my database. I stored the ICalUid of the appointment on the server, and the ICalUid of the one I created on the client in it's SQLCE database. This allowed me to find one from the other for updates and deletes or so I thought. Updates
are fine. But I still cannot find the deleted appointment on the server, or get enough info from the server, to find the right item to delete on the client. I can no longer access the ICalUid of the appointment on the server because first I have
to find the appointment in deleteditems or recoverabledeletions folder to get the ICalUid (or CleanGlobalObjectId). SyncFolderItems returns the subject but not startdate so I cannot search in deleted etc using that combo and I don't feel subject alone
will be reliable enough at all. So, what you proposed works beautifully, but not for my initial problem, which was deleting.
Maybe this is microsoft fault but SyncFolderItems does not seem to return enough info to perform an accurate delete of an item. If it helps at all I am following this example: http://msdn.microsoft.com/en-us/library/exchange/ee693003(v=exchg.80).aspx but
of course the good folks at MS haven't filled in the important bits!
LucasF

Similar Messages

How to pop the stack and keep track of charFlag, in C?

/* Below is am popping the stack, which works, but it does not keep track of the charFlag variable that is pushed onto the stack. Can you help me with modifying this *char pop (stackNodePtr ptr) so when it pops the value from the stack, and keeps track of the charFlag?
Thank you very much in advance for your assistance!!!
Note: This posts is an offspring of my previous question: _"Why is the stack, written in C, converting + to ascii 42 ?"_. I want to thank Xnav for the excellent suggestion of including a character flag to keep track of the datatype being pushed onto the stack. Thank you etresoft for variable renaming comment.
typedef struct stackNode {
int value;
int charFlag;
struct stackNode *next;
}stackNode;
typedef stackNode * StackNodePtr;
char pop( StackNodePtr *ptr )
if( StackIsEmpty(*ptr))
printf("
Pop attempted, but the Stack is empty, or underflow");
exit(2);//needed stdlib.h to work
else
char sTop;
StackNodePtr old;
if( (old = (StackNodePtr ) malloc( sizeof (StackNodePtr) )) == NULL )
printf("
No memory left for pop operation");
sTop = (*ptr)->value;
old = *ptr;
*ptr = (*ptr)->next;
free(old);
return (sTop);

//I added a global variable int gCharFlag to keep track of the popped charFlag. Will the code below work, or should I just return (*ptr)? Thank you once again!
//struct, typedef and gCharFlag are stored inside of a .h file
typedef struct stackNode {
int value;
int charFlag;
struct stackNode *next;
}stackNode;
typedef stackNode * StackNodePtr;
int gCharFlag;//global variable, which is stored inside of a .h file
//below method is stored inside of a .c file
char pop( StackNodePtr *ptr )
if( StackIsEmpty(*ptr))
printf("
Pop attempted, but the Stack is empty, or underflow");
exit(2);//needed stdlib.h to work
else
char sTop;
StackNodePtr old;
if( (old = (StackNodePtr ) malloc( sizeof (StackNodePtr) )) == NULL )
printf("
No memory left for pop operation");
sTop = (*ptr)->value;
gCharFlag = (*ptr)->charFlag;
old = *ptr;
*ptr = (*ptr)->next;
free(old);
return (sTop);//to return the struct node, then it would be return (*ptr), correct?

How many vocal and instrument tracks

How many vocal and instrument tracks is Logic studio able to handle. Thanks for the help!

Hi
On paper it all should work. In actual real-world conditions ... there are no assurances that you won't have issues. Troll the message boards and you'll see. I "upgraded" OS only to have lots of buggy behavior. I ran back to Tiger 10.4.11 and I don't want to mess with a smoothly running system. Of course, that means I'm still with Logic 8, as for now that's ok, I have to admit I would like to have a functional flex time and the guitar sims & pedal board FX, but I'll wait for the OS and Logic bugs and driver issues to be worked out before I dump my now stable and high capacity system.
Keep in mind that there are lots of very friendly and helpful people here in the Logic forums who can offer many good solid tips and help with buggy behavior. Kudos to them all.
Best of luck to you.
Cheers

How to register and unregister Mbean server when jvm is crashed.

Hi All,
how to register and unregister Mbean server when jvm is crashed with specifying like internal error(xxxxxxxxxxxsome number)
I am getting error NameAlreadyBindExcetion when i call the below method in my program, how to unregister and register again, can any one can help on this topic?
internalConnectorService.start();
regards
Prasad.Nadendla

Looks like your server object is already bound and registered and your trying to re-register the same...
is that a corba server? if yes, you'd be able to check that with the NamingService tools

How to register and publish the webservice in the registry

hai friends,
1) how to register and publish the webservice in the
registry?
I think To register the webservice first create an
organization and publishes it to the registry then
only register the webservice .Is it correct or not .
If it is not correct give the suggestion for me.
otherwise send the reply it is correct for me.
and tell about ClassificationScheme and why we are using that ?how can i get the String ?
Thanks,
radhika.

My Support Profile*

How to download and keep multiple maps using Mac/E...

I use my mac and this site
http://nokiamaps.site666.info/
to download maps via my mac to my E71. It works fine. I can install any map, however, only one map at a time.
I would be happy if anyone knows and could tell me how to download and keep several maps active using my mac and E71. For example, I would like to have US, Japan and some countries in Europe loaded to my E71.
I can of course keep several maps on my mac but I want to have them loaded to the E71.
Can I have several maps loaded in the E7? Where to put the maps (which directory)?

I do not know if anyone is interested but I have figured out one way to do it. Not the nicest perhaps but it works.
On my mac I create a directory named MyMaps and then I download the maps I want and put them into directories (one directory per map). I copy using the -r flag, which merges/adds on files.
For example if MyMaps is empty and I use:
cp -r Sweden/* MyMaps/
I will get the Swedish map in MyMaps.
To add the map of Netherlands I simply do:
cp -r Netherlands* MyMaps/
I have now merged the map of Netherlands with the map of Sweden and all maps are in MyMaps. And I can add more maps by running cp -r again. And when I am done, I transfer the directory structure in MyMaps to my E71.
I had some troubles with the diskcache structure. It worked fine for me to remove everything (all files) in the diskcache. They will be created when I move MyMaps.

How can create and change PCA line items.

How can create and change PCA line items.
Please tell me the process and t.codes.

If you are in version < 4.7 ee then use 9KE0 tcode for passing profict center entries or trasnafer of balances from one profit center to another.
If you are in new GL regular FI entry like FB50 will hold good for account types "S"

How to disable and hide the menu items of 'copy From' button of Goods Recei

hi expert,
I am new in SAP B1. so please help me.
Q:How to disable and hide the menu items of 'copy From' button of Goods Receipt PO form?
Regards
sanoj

Hi Sanoj,
Try This.....
If pVal.FormType = "143" And pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_ACTIVATE And pVal.BeforeAction = False Then
            oform = sbo_application.Forms.GetFormByTypeAndCount(pVal.FormType, "1")
            Dim oitem As SAPbouiCOM.Item
            oitem = oform.Items.Item("10000330")
            'To Disable the button
            oitem.Enabled = False
            'To hide the button
            'oitem.Visible = False
        End If
Thanks
Shafi
Edited by: shafi_sunshine on Sep 15, 2011 7:35 AM

Table name which keep track records Items which is Personalized.

Hi,
Is their any table which keep track records of personalized items of self-service page.
Thanks in advance
Bachan.

You can navigate to Functional administrator and get all the personalizations in an xml format. Hope that helps.
Regards
Sumit

ITunes 11 and keeping track of number of times a track is listened to

iTunes 11 does not keep track anymore of number of times a song is played. It keeps the number you had before but does not increase the number after it is played. Anybody else has the same problem?

For that you need to have a shift register or a feedback node and keep counting whenever the case structure case is executed the count will be increased by one see the attached snippet.
Good Luck
The best solution is the one you find it by yourself
Attachments:
CaseStructure count.png ‏10 KB

Importing Images as Referenced and Keeping track of Imported Folders.

I'm not sure how to even go about describing this issue other than to relate it to the way Lightroom handles the same situation. I'm trying to figure out how to keep track of the specific folders of images I Import in to Aperture to make sure that all have been imported properly. In Lightroom, in the left panel, you see an exact replica of the folders/images as they appear on the drives thay were Imported from. You then have the option of creating your own specific Gallery of Images, something similar to Projects, that show up below the Imported folder tree.
In Aperture, there is no way to see the folder structure that the images came from that I know of. When importing thousands of images this can get very confusing and lead to missing groups of images. Images that nver get Imported. Does anyone know if we can set Aperture up in a similar fashion as Lightroom or does anyone know if a workaround that accomplishes a similar goal?

Lightroom can show you the exact structure of the files on disk.
Aperture has an abstraction layer between the files on disk and the files it manages.
This is both a blessing and a curse, depending on what you want.
In Aperture when you import you can select "Leave images in their current location." That should work fine, and give you referenced images. I personally have never seen this fail, but in the event that it did, and for example 102 of 106 images were imported, I don't really know of an easy way to show via Aperture what didn't get imported.

HT5621 other country iTunes store and keep US purchase items

I move to an other country and now want to change country for iTunes store and keep all my US purchase iTunes items, how can i do that?

I'am in the same situation as you, I'm french and I'm in America now. I have a card for Itune ($15) but I need to change the country for use the code and I can't because I need to "clear" my account (to have 0€), I have 0,54€.
Help?! ^^

How to preserve and keep 2 Pantones from Illustrator, via Photoshop, to InDesign?

Ciao!
I have designed a 3D illustration in Illustrator (version 15.0.2), this illustration need to be printed for a magazine cover and I want to use 2 pantone colours for it.
The 2 pantone colours are assigned form the Swatch Palette.
The image is in CMYK (file > document colour mode > CMYK).
The illustration is in 3D and the text has been convereted in outline. But I have not expanded the appareance of any element.
I want to add more depht to the illustration and Photoshop seems the best solution for shadows and visually looks better.
Plus InDesign can manage Photoshops files with Effects very nicely.
[I find difficult and problematic to import Illustrators files with added Effects in InDesign, it leaves always a white background around the image and I don't know how to get rid of that.]
How do I import the image in Photoshop (version 10.0.2) and keep the pantone?
If I export/import the image as .psd format the files gest converted in CMYK automatically.
In the Swatch Panel (next to the pantones I want to use) I see two square boxex the first has a round gray circle (I don’t know what this means), the second has 4 triangles (this I believe means CMYK).
In the Separation Preview panel (if I click Overprint Preview) I have listed the 4 CMYK colours and the 2 pantones but if I turn off the 5 CMYK eyes I only see the white artboard, it’s like if the pantone are not assigned.
After adding the shadows in Photoshop I need to import the file from Photoshop to InDesign and the final file need to be transparent because there's a backround at the bottom and a box of text in between the background and the illustration.
I could place the bacground and the text in photoshop no problem for that...
The questions are how do I import the 3D file from Illustrator, keep the pantone and add the Photoshop shadow?
Hope anyone can help me as I'm going to press soon...
Please feel free to ask me anything else if need to answer the questions.
Many many thanks in advance if you can help me.
ASTIK

This first image is the file in ID with High Quality Display on
This is with Overprint Preview and that what I aming for, roughly, for the final. [I'm not sure what is the purpose of overprint preview in ID].
This is the 3 plates of Black and two pantones
This is the plate of Black plate
This is the Pantone 812 c plate
and finally this is the Pantone 8201 c plate
Hope this can help to get the best solution

How to start and keep Skype at contacts, no home for default?

iMac Snow Leopard 10.6.8, skype 6.15 (335) How can I start and keep skype showing my contacts by default instead of the no_idea_why_it_exists_ "home" option? I NEVER use (and have no need for) the home stuff. Thanks.

With 10g and previously a correlation was on the instance i,e, as soon as it was initiated and the instance was alive an exception would be thrown if we tried to create another instance. It seems to be on activity in 11g. Is that correct ?

How to restore and keep updated OS

Hi,
I'm looking at selling my iMac, so will obviously need to restore it and wipe any trace i ever existed on it.
I brought the iMac with Snow Leopard, then upgraded it serveral times until what im at now, Mountain Lion.
I only have the install disks that came with it, whcih are obviously for Snow Leopard.
If i sell my iMac after restoring it, it'll only have Snow Leopard on it, not Mountain Lion.
Is there a way around this?
If so can you point me in the direction of the instructions for trestoreing and keeping the latested OS intaked.
Thanks

You must sell the computer with Snow Leopard. OS X Mountain Lion is registered to your Apple ID and you can't transfer it to anyone. Apart from that, the new owner won't be able to reinstall Mountain Lion.
Follow these steps:
1. Insert the Mac OS X disc and hold the C key while your Mac is starting.
2. Choose your language, and go to Utilities menu (on the menu bar) > Disk Utility.
3. Select "Macintosh HD" on the sidebar, go to Erase tab and erase the drive.
4. Close Disk Utility and reinstall Mac OS X.
5. When the installation finishes, hold the mouse while your computer is starting to eject the DVD, and turn off your computer. Remember to give the discs to the new owner.
I suggest you to tell to the new owner to update Mac OS X to the most recent version (open  > Software Update), and if he/she wants, purchase OS X Mountain Lion

How to register and keep track on item packaging during transactions

Similar Messages

Maybe you are looking for