How to register and unregister Mbean server when jvm is crashed.

Hi All,
how to register and unregister Mbean server when jvm is crashed with specifying like internal error(xxxxxxxxxxxsome number)
I am getting error NameAlreadyBindExcetion when i call the below method in my program, how to unregister and register again, can any one can help on this topic?
internalConnectorService.start();
regards
Prasad.Nadendla

Looks like your server object is already bound and registered and your trying to re-register the same...
is that a corba server? if yes, you'd be able to check that with the NamingService tools

Similar Messages

How to start and stop sapmmc server when windows is started and shutdown

Hi,
May i know how i can make sure the sapmmc server for ECC 6.0 to start when the windows 2003 server is started. I know i need to add this as a service in the windows service manager but i dont know how to do that.
Please advise me on how to add a service to start the sapmmc server when windows is started and how to stop the sapmmc server automatically when windows is shutdown.

Hi Raja
checkout this document m sure it will help you in configuration
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0512c790-0201-0010-72b7-886677ad7955
also check
/message/6511605#6511605 [original link is broken]
All the best ,,
Cheers
dEE

Register and unregister locations using ombplus script

hi
how to register and unregister the locations using ombplus scripts.
any help would be appreciated.
thanks,
Keka

The deployment script I have posted previously to copy a project mdl over to a new repository for local deployment includes creating a control center, making it the default for your project, creating the locations, assigning them to the control center, and registering them.
Re: importing mappings using OMBPLUS
To unregister a location, first you want to undeploy anything deployed from it to avoid dangling references int he repository, and then unregister the location.
I do that in the following drop_project script that we use to delete an old copy of the project before importing the new version.
#get db connection info
source c:\\omb\\owb_config.tcl
#get standard library
source c:\\omb\\omb_library.tcl
# PVCS Version Information
#/* $Workfile:   ers_owb_drop_project.tcl $ $Revision:   2.1 $ */
#/* $Author:   michael.broughton $
#/* $Date:   03 Apr 2008 13:43:02 $ */
# Connect to repos
# Commit anything from previous work, otherwise OMBDISCONNECT will fail out.
exec_omb OMBCOMMIT
# If already connected, disconnect first.
set print [exec_omb OMBDISCONNECT]
# Test if message is "OMB01001: Not connected to repository." or "Disconnected."
# any other message is a showstopper!
if [string match Disconn* $print ] {
   log_msg LOG "Success Disconnecting from previous repository...."
} else {
   # We expect an OMB01001 error for trying to disconnect when not connected
   if [string match OMB01001* $print ] {
      log_msg LOG "Disconnect unneccessary. Not currently connected...."
   } else {
      log_msg ERROR "Error Disconnecting from previous repository....Exiting process."
      log_msg ERROR "$print"
      #exit
set print [exec_omb OMBCONNECT $OWB_DEG_USER/$OWB_DEG_PASS@$OWB_DEG_HOST:$OWB_DEG_PORT:$OWB_DEG_SRVC USE REPOSITORY '$OWB_DEG_REPOS']
if [omb_error $print] {
    log_msg ERROR "Unable to connect to repository."
    log_msg ERROR "$print" "1"
    log_msg ERROR "Exiting Script.............."
    return
} else {
    log_msg LOG "Connected to Repository"
return
# Connect to project
set print [exec_omb OMBCC '$PROJECT_TO_DROP_NAME']
if [omb_error $print] {
   log_msg LOG "Project $PROJECT_TO_DROP_NAME does not exist. No Cleanup Required...."
   exec_omb OMBDISCONNECT CONTROL_CENTER
   exec_omb OMBDISCONNECT
   return
} else {
   log_msg LOG "Verified project $PROJECT_TO_DROP_NAME exists"
   exec_omb OMBCC '..'
# Exporting MDL Backup of Project
set print [exec_omb OMBEXPORT TO MDL_FILE '$EXPORT_FILE_PATH/$EXPORT_FILE_NAME' FROM PROJECT NAMES '$PROJECT_TO_DROP_NAME' OUTPUT LOG TO '$EXPORT_LOG_PATH/$EXPORT_LOG_NAME' ]
if [omb_error $print] {
   #We expect to get warnings due to differences in Control center names etc,
   if {[string match OMB05105* $print]} {
      log_msg LOG "MDL File $EXPORT_FILE_NAME exported with warnings"
   } else {
       log_msg ERROR "Unable to import $EXPORT_FILE_PATH/$EXPORT_FILE_NAME. "
       log_msg ERROR "$print"
       log_msg ERROR "Exiting Script.............."
       exec_omb OMBROLLBACK
       return
} else {
   log_msg LOG "MDL File $EXPORT_FILE_NAME exported with no warnings.............."
exec_omb OMBCOMMIT
# Validate to Control Center
set lst [OMBLIST CONTROL_CENTERS]
if [string match *$CONTROL_CENTER_NAME* lst] {
   log_msg LOG "Verify Control Center $CONTROL_CENTER_NAME Exists."
   log_msg LOG "Setting Passwords to enable de-registration"
   log_msg LOG "Connecting to Control Center $CONTROL_CENTER_NAME"
   set print [exec_omb OMBCONNECT CONTROL_CENTER USE '$DATA_LOCATION_PASS' ]
   if [omb_error $print] {
      log_msg ERROR "Unable to connect to Control Center $CONTROL_CENTER_NAME"
      log_msg ERROR "$print"
      log_msg ERROR "Exiting Script.............."
      exec_omb OMBROLLBACK
      return
   exec_omb OMBCOMMIT
   log_msg LOG "Deleting Existing Mappings."
   set print [exec_omb OMBALTER LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (PASSWORD) VALUES ('$DATA_LOCATION_PASS')]
   exec_omb OMBCOMMIT
   exec_omb OMBCC '$ORA_MODULE_NAME'
   set mapList [ OMBLIST MAPPINGS ]
   foreach mapName $mapList {
      log_msg LOG "Un-Deploying: $mapName"
      set print [ exec_omb OMBCREATE TRANSIENT DEPLOYMENT_ACTION_PLAN 'DEPLOY_PLAN' ADD ACTION 'MAPPING_DEPLOY' SET PROPERTIES (OPERATION) VALUES ('DROP') SET REFERENCE MAPPING '$mapName' ]
      if [omb_error $print] {
         exit_failure "Unable to create Deployment plan for '$mapName'"
      set print [ exec_omb OMBDEPLOY DEPLOYMENT_ACTION_PLAN 'DEPLOY_PLAN' ]
      if [omb_error $print] {
         exit_failure "Error on execute of Deployment plan for '$mapName'"
      exec_omb OMBDROP DEPLOYMENT_ACTION_PLAN 'DEPLOY_PLAN'
      exec_omb OMBCOMMIT
exec_omb OMBCC '..'
exec_omb OMBCC '..'
   log_msg LOG "Un-Registering Code Location."
   set print [exec_omb OMBUNREGISTER LOCATION '$DATA_LOCATION_NAME']
   if [omb_error $print] {
      log_msg ERROR "Unable to register Location $DATA_LOCATION_NAME"
      log_msg ERROR "$print"
      log_msg ERROR "Exiting Script.............."
      exec_omb OMBROLLBACK
      return
   exec_omb OMBCOMMIT
} else {
   log_msg LOG "Control Center $CONTROL_CENTER_NAME does not exist - unable to de-register locations."
# Dropping project
exec_omb OMBDISCONNECT CONTROL_CENTER
log_msg LOG "Renaming project $PROJECT_TO_DROP_NAME to $PROJECT_TO_DROP_NEWNAME ...."
set print [exec_omb OMBALTER PROJECT '$PROJECT_TO_DROP_NAME' RENAME TO '$PROJECT_TO_DROP_NEWNAME']
if [omb_error $print] {
   log_msg LOG "Failed to drop project $PROJECT_TO_DROP_NAME...."
   log_msg ERROR "$print"
   log_msg ERROR "Exiting Script.............."
exec_omb OMBDISCONNECTThis script uses the same config and library file given in the other post that I pointed you towards. That is where you will find the definition for exec_omb, for example which is simply a wrapper for OMB+ calls
Now, note that I don't un-deploy any tables, views, sequences etc. We use Designer as our location of record for the data model metadata so our OWB project never deploys any object metadata except for mappings. Your setup may be different, still this should point you in the right direction.
Cheers,
Mike

Register and unregister logfiles

Hi @all
i have done a system copy with copy and paste the required files from on server to an second. To create an central instance I have start the sapinst with properties from a systemcopy (maxdb) He create an Database Instance with a wrong the wrong log and datafiles How register and unregister I the data and logfiles to start the database without the 9050 Error (cannot access File)
KG
Martin

Hi Lars,
and thx for your helpfully answer.
KG
Martin

Does jconsole support monitoring of MBeans registered to New MBean Server?

I see that jconsole is displaying the MBeans registered to Platform MBean Server (obtained through java.lang.ManagementFactory.getPlatformMBeanServer()) but not the MBeans that are registered to a newly created MBean Server (created using javax.management.MBeanServerFactory.createMBeanServer()).
Is there a way through which I can view the MBeans registered to newly created MBean Server in the jconsole?

Thank you for the information emcmanus.
So what I understand is that the jconsole if opened in a normal way (i.e. Local), it loads MBeans by looking up the Platform MBean Server.
All the MBeans belonging to other MBean Servers or custom created MBean Servers can be managed & monitored if jconsole is loaded using Advanced option (i.e. providing JMX URL) and with the help of remote connectors.
When I open Platform MBean Server, I dont see MBeans of other MBean Server and vice versa. (I think they are mutually exclusive).
Please correct me if what I have mentioned above is incorrect.
One confusing thing is that I see "JVImplementation" MBean is available when I open jconsole with either of the two option mentioned above.
Is there any specific reason for that?
Is that MBean part of Platform MBean Server or some other MBean Server?

How to Starting and Stopping OC4J Server using Ant

How to Starting and Stopping OC4J Server using Ant
In the ant task definitions for ant-oracle-classes.jar (see antlib.xml) there are two tasks called
     name="restartServer" classname="oracle.ant.taskdefs.deploy.JSR88StartServer"
     name="shutdownServer" classname="oracle.ant.taskdefs.deploy.JSR88ShutdownServer"
I thought that these would shutdown and start the OC4J server. I guessed the parameters as – (Does anyone know where 50 ant targets are documented?)
<oracle:restartServer
userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
<oracle:shutdownServer
     userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
This, however does not start and stop the SOA suite. To do that I've hacked this solution together -
<path id="oc4j.console">
     <pathelement location="${oracle.home}/config"/>
     <pathelement location="${oracle.home}/jlib/startupconsole.jar"/>
     <pathelement location="${oracle.home}/opmn/lib/optic.jar"/>
     <pathelement location="${oracle.home}/lib/xmlparserv2.jar"/>
</path>
<target name="stop" description="stop oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="stop"/>
     </java>
</target>
<target name="start" description="restart oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="start"/>
     </java>
</target>
This sort of works – except when the SOA suite doesn't stop cleanly – and needs user interaction to press a Close button. This isn't very useful when doing a continous integration build and deploy.
So, does anyone have any suggestions or alternative methods to do this?
- frank

Actually if the server throws exceptions when it stops (which it always has since we applied patch 10.1.3.3) this technique will pause until a user responds to pop-up ... So a better way (I think) is -
<target name="start" description="start oc4j server" depends="init">
<java classname="oracle.appserver.startupconsole.view.Runner">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="start"/>
</java>
</target>
<target name="stop" description="stop oc4j server" depends="init">
<echo message="We expect OC4J *NOT* to stop cleanly, so we will timeout after 3 minutes ..."/>
<java classname="oracle.appserver.startupconsole.view.Runner" fork="true" timeout="180000">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="stop"/>
</java>
</target>
<target name="restart" description="restart oc4j server">
<antcall target="stop"/>

<waitfor maxwait="2" maxwaitunit="minute">
<not><http url="http://${oc4j.http.hostname}:${oc4j.http.port}"/></not>
</waitfor>
<antcall target="start"/>
</target>

How to avoid shut down BPELPM Server when creating a user?

Hi,
How to avoid shut down BPELPM Server when creating a JAZN user and after doing changes to user-properties.xml?
Thanks,
Jorge

this configuration is only supported on a midtier - there is a work around for a standalone install, nevertheless I would not recommend this for production ..
if this is NOT a production enviroment - I can try to get you the information .
/clemens

How to register and publish the webservice in the registry

hai friends,
1) how to register and publish the webservice in the
registry?
I think To register the webservice first create an
organization and publishes it to the registry then
only register the webservice .Is it correct or not .
If it is not correct give the suggestion for me.
otherwise send the reply it is correct for me.
and tell about ClassificationScheme and why we are using that ?how can i get the String ?
Thanks,
radhika.

My Support Profile*

How to release sessions on db server when netwok outage occur

hi,
my database in 10g release 2.About 500 users are remotely connected.due to network breakage or light off at user side the clients disconnect from servers but their session still connected to database server .next time when users connect again then database server hang .how can i resolve this issue means when client disconnect from server then their sessions also disconnect from database server.
thx

Duplicate post.
Please continue instead with
how to release sessions on db server when netwok outage occur

How to Delete the node from cluster when the machine crashed?

In an three nodes Rac of 11g r2,How to delete the node from cluster when the machine crashed?
There is now way to repair the machine and have to add a new one.
What is step to follow up?

hi
IF YOU WANT TO DELETE RAC1 NODE
check $./olsnodes
1) delete the instance using dbca from any active nodes
crs_stat -t
srvctl stop asm -n rac1
2) delete listener
3) delete oracle_home from oracle user
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={RAC1}
4)delete asm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={RAC1}
5) update cluster node
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={active nodes like rac2,rac3}
6) update ASm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={active nodes like rac2,rac3}
cd $ORA_CRS_HOME
cd crs/opmn/conf
check for
$cat ons.config
remoteport=6200
cd crs_home/bin
$./racgons remove_config rac1:6200
$ go to crs home
and $ORA_CRS_HOME/crs/install/rootdelete.sh
$ORA_CRS_HOME/crs/install/rootdeletenode.sh
check for ./olsnodes

How to register EJBs to JMX Server?

When I register a SessionBean in the ejbCreate()- method like this:
ObjectName name = ObjectNameFactory.getNameForServerChildPerNode("SAP_MyMBean", "MyBean", null, null);
mbs.registerMBean(this, name);
I get an InvocationTargetException by calling any other method.
How can I register an SessionBean to the JMX-Server?

Looks like your server object is already bound and registered and your trying to re-register the same...
is that a corba server? if yes, you'd be able to check that with the NamingService tools

How to install and use sql server express 2014 with tools

I am a student and have an assignment that requires I use either mysql or sql server, so I chose to download and install sql server express 2014 with tools, but after installation was complete all I can see is sql server 2014 import and export data (64-bit)
and I have no clue what to do wiith it...I had used sql server 2008 a couple of years ago and it was easy, but this is very complicated, I have been trying to get this done for 2 days now, so someone please help me and tell me what I am doing wrong.

Hi,
It seems you did not installed complete software. Make sure you have downloaded below from
SQL Server Express Download link
Express with Advanced Services (SQLEXPRADV) when you click on Get started button on page displayed by clicking on above link. This download includes Sql Server Management Studio as well.
Before moving I would Like you to first read
Hardware and Software requirements
Please refer
how to install SQL server 2014 express
Above Link is for Enterprise edition but you can use it for express as well. When you reach page feature selection please select all features to install.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

How to stop and start Managed Server using weblogicServer

Hi
We are new.
We have 2 managed servers and an Admin Server.
We're trying to use the command line to stop/start our Managed Server.
Could someone share examples on how one could write the command line that's similar to the WLS console Server Start tab ?
We have a couple of classpaths and a bunch a arguments;
When we tried to start one of the managed server it defaults to use some other settings as opposed to the ones in Server Start tab.
What did we do wrong ?
Thanks

Hi,
Follow the below links,each n every links have various methods and example for starting and stopping of Weblogic services
We have 2 managed servers and an Admin Server.
We're trying to use the command line to stop/start our Managed Server.http://docs.oracle.com/cd/E15523_01/core.1111/e10105/start.htm#CIHBIGCD
We have a couple of classpaths and a bunch a arguments;http://docs.oracle.com/cd/E13222_01/wls/docs90/admin_ref/weblogicServer.html#frequently_used_optional_arguments
http://docs.oracle.com/cd/E13222_01/wls/docs90/admin_ref/weblogicServer.html#1008628
Regards
Fabian

How to register a custom MBean in weblogic 9.1

Dear All,
In weblogic 8.1, I usually register my custom mbeans using the <startup> tag in config.xml file. But in weblogic 9.1 I can not do this. <startup> tag is unrecognizable in weblogic config.xml file. Anybody knows how to write a java program and run it to register the custom MBeans?
Regards,
Fahad

I never promote the method the deletion unless you understand the underlying tables of planning, if you search on the forum you will see posts on the subject just like this one - Delete dimension from planning application
Cheers
John
http://john-goodwin.blogspot.com/

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

How to register and unregister Mbean server when jvm is crashed.

Similar Messages

Maybe you are looking for