How to Relate Inbound Msg w/ BPM msgs?

I send an asynch message to XI and it goes through BPM then to a sender channel.  In the monitor, it has:
-Line1 for Inbound = AENGINE & Outbound = PE
-Line2 for Inbound = PE & Outbound = AENGINE
Each of these lines have a different message ID.  My question is how can I relate Line1 and Line2 together to know that they are same message sent from sender?

Bevan,
If I understood u right, what u r doing basically is to relate 2 messages from the list of processed messages.
U have BPM in your case, that is the only difference.
If I am right, this was exactly the same issue which i was trying to figure out.
let me find  the thread from my earlier posts.
Thank god, I was able to find the thread.
Correlating message id between async messages
Just try to go through it. I am not sure if it is going to simplify or solve or even complicate.
Good luck.
-Naveen.
Message was edited by: naveen chitluri
Message was edited by:
        naveen chitluri

Similar Messages

  • How to replace JMS Msg id with My own customer ID??

    Hi Frnds,
    I am working one one scenario using JMS Adapter, when i am placing message in Quese,JMS adapter genarating MSG msg id,but i ahve to add my own id its custiomer specific,how to replace JMS Msg id??
    thanks,
    Raj

    Hi,
    found this in SAP help:
    Correlation Settings
    Define which algorithm is to be used to create the message ID of a new XI message. The prerequisite for selecting an ID is that it is a GUID (globally unique identifier) according to ISO-11578.
    If the message ID is not a GUID, message processing will fail. This can cause message duplicates if the ID is not unique. Furthermore, if the GUID does not conform to ISO-11578, this can trigger a GUIDFormatException.
    Set XI Message ID (MessageID) To:
    -         GUID (Recommended Value)
    -         JMSMessageID (Uniqueness Is JMS-Provider-Dependent)
    -         JMSCorrelationID (Uniqueness Is JMS-Sender-Dependent)
    -         JMSProperty (Uniqueness Is JMS-Sender-Dependent)
    Enter the JMS Property Name. This value is set for the XI message ID.
    If the JMSCorrelationID or JMSProperty are not set in the JMS message, a message ID is generated automatically.
    If you have selected JMSMessageID, JMSCorrelationID, or JMSProperty and entered a JMS message ID in these fields, you should see the Remove 'ID:' Marker from JMSMessageIDindicator. Set the indicator.
    This is necessary because the JMS specification stipulates that each JMS message ID starts with 'ID'. However, this conflicts with ISO-11578.
    Set XI Conversation ID (ConversationID) To:
    -         No value
    If you choose this setting, the XI conversation ID is not set.
    -         JMSMessageID (Uniqueness Is JMS-Provider-Dependent)
    -         JMSCorrelationID (Uniqueness Is JMS-Sender-Dependent)
    -         JMSProperty (Uniqueness Is JMS-Sender-Dependent)
    Enter the JMS Property Name. This value is set for the XI message ID.
    -         Stored JMSCorrelationId of request
    The saved JMSCorrelationID of the request is used.

  • How XI can transfer msgs between ERP to J2EE systems??

    I have a doubt...wat are the responsibilities of a XI developer for system handling the messages between ERP to J2EE systems....If possible give me any link..so that i can read...
    And can any one explain the entire scenario how XI can transfer msgs between ERP to J2EE systems...

    To make XI use appropriate WebSphere's libraries for connecting to it's JMS
    which library file i want to use for this senarios. plz any body help me
    We have WebSphere's lib catalog, but do not know which jar's we have to upload in .sda file
    The adapter tries to send the msg bot doesn't find recuired classes
    Plz send me info ont this to my mail id [email protected]

  • How to send common msg

    Hi
    How to send common Msg to all the users presently logged in.This
    msg should appear as popup in a screen, tell me the procedure or
    tcode.
    regards
    gp

    tcode SM02 will do that, as soon as your user does some kind of action.
    or else, investigate usage of tcode SE37 with function module TH_POPUP.
    or check on the web for ABAP code for program ZPOPUP.

  • How can i send msg from iphon to ipod?

    How can i send msg from my iphon to the ipod?

    Yes as long as you are Messaging the iPod with an email address that is not listed on the phone in Settings>Messages>Send and Receive.
    If both devices are using the same email Apple ID there will have the same email address and phone number listed in Settings>Messages>Send and Receive.
    You can on the phone uncheck the email adress in Settings>Messages>Send and Receive.
    If you want to FaceTime one another do the same for Settings>FaceTime

  • How can i transfer msgs from iphone 4s using ios6 to iphone 5 using ios7 without removing any thing from iphone5?

    how can i transfer msgs from iphone 4s using ios6 to iphone 5 using ios7 without removing any thing from iphone5?

    Thanks for the response -I thought that may be the case. I can access all the tracks in iTunes as it's part of the iTunes Match library. Is there not a way to download the tracks that are currently on the iPhone to the MacBook? I'm not trying to transfer the purchases but download the content from the cloud.
    Have I explained myself at all well?!

  • How to relate IDOC generated in sap through ALE from legacy system

    Hi all,
    can any one tell me how can relate an idoc generated in SAP with the new idoc generated in a legacy system. I mean how could I identify, which idoc is generated for a particular idoc in legacy system and vice versa.
    Thanks,
    Nilanjana

    Thanks Suhas but when i am getting error message related to partnr profile when pressing this 'TRACE IDOC' button even with idoc in status 53.
    Edited by: nilanjana sinha on Nov 11, 2011 8:20 AM

  • How to relate dispute case for a AR document

    Hi Gurus,
    I have a requirement to change the reason code change date of dispute case(DIspute management) for the related AR document.
    Basically i am posting a AR document through BAPI. Now i wanted to take the last dunned date(MADAT) and find the related dispute case after that change the reason code change date using last dunned date.
    so my question how to relate relevent dispute case for the AR document?
    Thanks advance.
    Regards,
    Radhakrishna.

    Hi.............
                 Better and simplest way you can get it through a simple qury report. Create a query by joining two tables ODLN and OINV. OINV's docdate means the closing date of delivery challan.
    Regards,

  • When im trying to download a free App an error appears and sais that my previously purchase was declined.how is related a free app with a paying one?

    When im trying to download a free App an error appears and sais that my previously purchase was declined.how is related a free app with a paying one?

    Because that's the way you setup your account. Whether the app is free or not is irelevent, apparently the payment method you selected when originally setting up your account is no longer valid, hence your account is not longer valid. Either fix your selected payment method or setup a new app store account without a credit card:
    http://support.apple.com/kb/ht2534

  • How to relate a report page to a tabular form?

    I have a table called PRODUCT
    SQL> desc product
    Name                                      Null?    Type
    PRODUCTNUMBER                             NOT NULL VARCHAR2(15 CHAR)
    PRODUCTDESCRIPTION                                 VARCHAR2(30 CHAR)
    LOCATION                                           VARCHAR2(10 CHAR)
    WARRANTY                                           NUMBER(4)
    PRODUCTSN                                 NOT NULL VARCHAR2(25 CHAR)
    STATUS                                             VARCHAR2(20 CHAR)Now I create a view, and based on this view I create a report page
    CREATE OR REPLACE VIEW V_PRODUCT_OVERVIEW AS
    SELECT PRODUCTNUMBER, PRODUCTDESCRIPTION, LOCATION, WARRANTY, COUNT(PRODUCTSN) QUANTITY
    FROM PRODUCT
    GROUP BY PRODUCTNUMBER, PRODUCTDESCRIPTION, LOCATION, WARRANTY;For each type of product (identified by PRODUCTNUMBER), there may be many instances (identified by PRODUCTSN). I want to put an edit button beside each record on the report page. After clicking the edit button, it will redirect to a detail page, which is based on the specific PRODUCTNUMBER, where I can add or modify products.
    SELECT PRODUCTSN, PRODUCTSTATUS
    FROM PRODUCT
    WHERE PRODUCTNUMBER = #THE_PRODUCTNUMBER_OF_LAST_PAGE#I don't know how to accomplish this, especially how to relate these two pages, and how to pass the PRODUCTNUMBER from the first page to the second. Any idea is appreciated! Thanks!

    Can't run sample appliation. When I run the appliation, login using "demo/#lower_case_workspace_name#", the browser comes with error message:
    ORA-06550: line 2, column 8: PLS-00201: identifier 'CUSTOM_AUTH' must be declared ORA-06550: line 2, column 1: PL/SQL: Statement ignored
    Error      ERR-10460 Unable to run authentication credential check function.

  • How to create Inbound Idoc from XML file-Need help urgently

    Hi,
    can any one tell how to create inbound Idoc from XML file.
    we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml'  we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
    Please let me know the process to trigger inbound Idoc with out using  XI and any other components.
    Thanks in advance
    Dora Reddy

    Hi .. Did either of you get a result on this?
    My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
    I see lots of mention of using a Function Module.
    Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
    Or is there something tht can be done with Standard SAP?
    Thanks
    Lee

  • How to call the Jsp through BPM Obejct

    Hi,
    I have gone through the some topic, how to call the Jsp through BPM Object.
    I have followed step below,
    1. I have create the sample jsp page
    2. Import into BPM studio under webroot\custom Jsp
    3. Created the screenflow and added the "Interactive Component call" object
    4. Right Click the Object and selected Maintask and Implementation type as "BPM Object Interactive Call"
    5. Selected the use JSP presentation object option and when i click ok its showing "BPM instance object must be selected"
    But when i select the Instance Variable tab, its not showing anything.
    Can any one help me how to call the Jsp in screenflow with step by step procedure, that would be very greate help for me.
    Regards,
    Anandh P

    Hi,
    You are running a jsp report through rwservlet. In this case paper layout will be displayed. You have to deploy your jsp as web report to get the web layout. Please refer to the doc below, which describes how to deploy the web report.
    http://download-uk.oracle.com/docs/html/B10314_01/pbr_run.htm#1011901
    To run the jsp report, URL may look like
    http://www.wwt.com/reports/<jsp name>?<parameter list>
    Hope this helps
    Vinayak

  • How to relate STEPUID/DMUID in RSDDSTAT_DM to STATUID in RSDDSTATTREXSERV

    I am trying to troubleshoot slow performance of a query in BIA.
    It spends more than 250 secs on DB (BIA). How to relate STEPUID/DMUID in RSDDSTAT_DM to STATUID in RSDDSTATTREXSERV. I can get StepUid and DMUID from the query statistics.
    I know that I can get DataManager UID by executing the query in rsrt and then go to RSDDSTATTREXSERV. But I want to see the BIA statistics for query executions by the end users.
    Is DMUID in RSDDSTAT_DM same as STATUID in RSDDSTATTREXSERV?
    I assume that all the queries that hit BIA have an entry in RSDDSTATTREXSERV.

    Marc,
    We have changed the huge dimension to line item dimension. Also changed the reorg multiplier to 0.25 so now every blade has one part and total there are 15 parts. But the query performance is still VERY poor. Query spends 30+ seconds in BIA even when this is the only query running in the system.
    You can imagine that when this (and similar) queries are run under some load, the runitmes go as high as 250 secs. this is effecting performance of other cubes as well. Also, with BIA mimimum runtime of any query on this cube is 30 sec. With aggregates, some queries return in less than 10secs.
    Our BIA is sized as per SAP recommendations. Size of the indexes does not exceed 50 % of the total available phyical memory.
    Any inputs welcome.
    Thanks,
    Saurabh Bansal
    Update: We applied the note you suggested. No huge gains.
    Also, we have now upgraded to Rev 49. Runtimes are still over 25 secs (DB time) for all the queries on this cube which is obviously unacceptable.
    Edited by: Saurabh Bansal on Jan 9, 2009 10:09 PM

  • How to use factory calender in BPM (NWDS 7.1 environement )

    hi guys,
    I have requirement to send u201Cnotification of missed deadlineu201D using factory calendar.
    The time to send notification is in hours and its is less than a day. So a task created on Friday 5u2019o clock should send missed alert on Monday 9 AM (assuming business run from 9 to 5).
    this need to be achieve using BPM workflow can any suggest me how to use factory calendar in BPM .

    Hi,
    You can use "BUSINESS_DATE_CREATE" function module in the ECC system for your requirement.
    This will calculate exact date and time and return next business day.
    You need to some datetime convertions on the BPM side to get it working
    Regards, Anil

  • How to relate data of tables returned by FM for reading data from ST03N

    Hello,
    I am using the FM SWNC_COLLECTOR_GET_AGGREGATES to retrieve data displayed in T-Code ST03N into my report.
    I am able to get the required data in different tables like Times, Memory, Usertcode, Userworkload, Hitlist_database.
    However I am unable to undertand how to relate the data of these different tables, prepare another internal table with only the fields that are required for my report and then display those details.
    Like, I want to loop through one of these internal tables, read data from other internal tables and consolidate my required data. But I am unable to understand based on what criteria I can read other internal tables inside a loop of any one of the above said internal tables.
    I searched a lot and found many threads and blogs related to ST03N and learnt a lot about this T-code. But I could not find how to relate the data of all these tables.
    Request you to please help.
    Thanks and Best Regards,
    Eswar

    Hi,
    I see the common fields like TaskType, EntryId. But, I want to make sure that these are the fields that are enough to read the records or is there any other way that I can be sure that I am getting the correct record in my read statement. So my question is specific to the tables returned from the FM SWNC_COLLECTOR_GET_AGGREGATES and not a generic one.
    Thank you for your help.
    Best Regards,
    Eswar.
    Edited by: eswar praveen on Aug 20, 2010 12:19 PM

Maybe you are looking for

  • Vendor account Group

    Hello SAPians, I have a issue with regard to Vendor Account Group,can you please help me with some information Issue is: User want to change the Vendor account group of some vendor and there are few things need to be changed for TAX year 2012. what c

  • Digitally signing the config profile

    The 'General' tab of the web configuration tool provides an interface for signing the profile. I have an internal certificate authority installed. Can someone provide guidance on how to generate a certificate for the profile using the internal CA so

  • Saving as .psd ("layers" option checked), why don't others see the layers?

    Recently I've been having an issue where I've been saving a file in .psd format and I have no issues opening it up, editing it and seeing all the layers. But I have sent it to several people and everyone has opened it and only seen a single layer as

  • Can't register billing information on Portugal iTunes

    Hi, I'm trying to sign in iTunes' Portugal store, and when I enter my username and password it says that there is still some information left to fill out. It takes me to an agreement page, I check the combo box agreeing and then it shows the form wit

  • Updated to 4.4.3, now Netflix is gone and can't scroll on Internet

    I updated my 3 day old unit to 4.4.3 last night and I turn Apple TV on today and find that Netflix is gone and when I go to the Internet option I cannot scroll off of YouTube under Internet.  When I try to go down it makes a 'ding' noise and kicks me