How to relink form executables - 6i

Platform: Windows Forms Developer 6.0.8.11 (client/server) - Yes, I know this is desupported and way outdated.
Per a workaround for a reported bug in this version, I have installed required support files from RDBMS 8.0.6.3.13.
Now I need to relink my form executables. The instructions say to run make -f ins_forms60w.mk install from my $ORACLE_HOME/forms60/lib folder. The problem is that this folder doesn't exist on windows. A search for this .mk file turned up nothing.
Any ideas would be appreciated.

Relinking the executables is only necessary when your application is deployed to an UNIX environment. Have you tried your application without completing this step?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Similar Messages

Relinking forms executable in 11.5.10.2

Hi friends,
My environment is 11.5.10.2 with 10.2.0.4 db on Solaris SPARC 10. I would like to relink the forms executables namely f60webmx and f60srvm. Can you please confirm if the below steps are correct.
1) source $APPL_TOP/APPSORA.env
2) cd $ORACLE_HOME/forms60/lib
make -f ins_forms60w.mk install
3) adrelink.sh force=y "fnd f60webmx"
are these the only required steps or are there any other steps involved too ?
Thanks

Hi Hussein,
I ran adrelink.sh force=y "fnd f60webmx"
but i got the following error message
Starting link of product 'fnd' on Tue Sep 14 07:44:35 AST 2010
Current product is fnd
Current product TOP is $FNDTOP
Current prodarea is /u01/oratest/prodappl/fnd/11.5.0
Backing up or removing executables...
rm -f /u01/oratest/prodappl/fnd/11.5.0/bin/f60srvm
Done backing up or removing executables.
Relinking module 'f60srvm' in product fnd ...
make -f /u01/oratest/prodappl/admin/out/link_fnd_13203.mk /u01/oratest/prodappl/fnd/11.5.0/bin/f60srvm
Starting link of fnd executable 'f60srvm' on Tue Sep 14 07:44:35 AST 2010
make: Fatal error: Don't know how to make target `/u01/oratest/prodappl/fnd/11.5.0/bin/f60srvm'
Done with link of fnd executable 'f60srvm' on Tue Sep 14 07:44:35 AST 2010
Relink of module "f60srvm" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /u01/oratest/prodappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Done with link of product 'fnd' on Tue Sep 14 07:44:35 AST 2010
adrelink is exiting with status 1
End of adrelink session
Date/time is Tue Sep 14 07:44:36 AST 2010
Line-wrapping log file for readability ...
Done line-wrapping log file.
Original copy is /u01/oratest/prodappl/admin/log/adrelink.lsv
New copy is /u01/oratest/prodappl/admin/log/adrelink.log
Its looking for f60srvm in $FND_TOP/bin.
Can i run the below command after sourcing the env file in $ORACLE_HOME to relink f60srvm
make -f ins_forms60w.mk install ($ORACLE_HOME/form60/lib)
Thanks

Relinking Forms executable in Oracle 11i

Hi Friends,
I am facing an issue where after i starts the forms server using adfrmctl.sh, it works fine for a few hours after which i receive an FRM-92050 error in forms application. I have to restart the forms server again to get it back working and this cycle continues. Once i get the FRM-92050 error, i check the OS for the processes and f60srvm as well as 1-5 f60webmx processes are up & the forms port is listening as well(using netstat -an|grep 9000). No changes have been done to the environment. I am thinking about relinking the forms executable. Is the following command enough and will it affect any other binaries. Should i take a complete backup of the system before running the below statement.
$ adrelink.sh force=y "fnd f60webmx"
Thanks

>
The previous DBA over here had warned against running Adconfig on either db/application tier as there are some custom environment files in the system and this will be overwritten once autconfig is run.Are the customizations well-documented? If so, it should be possible to extract the customizations to templates or custom .env files, so they will not be overwritten by AutoConfig. You should probably consider finding out about those customizations anyway, or the next time that you apply a patch that invokes AutoConfig, you could be in trouble. :-)
That's a side discussion, though. For your main issue, as Hussein suggests, it would be helpful to see the entire error message, not just the generic part.
Regards,
John P.
http://only4left.jpiwowar.com

Relinking forms executables results in "No rule to make target"

In the course of installing Forms 11.1.1.4 on weblogic 11gR1 (10.3.4), I ran into an issue after installing patch p9473270 (refer to Oracle Doc ID 1276725.1). The ERP system vendor recommends relinking the forms executables after applying this patch with the following commands:
Relink the Oracle forms binaries:
cd $ORACLE_HOME/forms/lib
make -f ins_forms.mk frmcmp_install
make –f ins_forms.mk frmbld_install
make –f ins_forms.mk frmcmpb_install
make –f ins_forms.mk frmweb_install
The second command resulted in an error:
$ make –f ins_forms.mk frmbld_install
make: *** No rule to make target `–f'. Stop.
After researching this issue, I tried the following command :
$ relink forms
This successfully relinked all forms executables.
-rwx------ 1 oracle dba 12510433 Jan 20 20:11 frmcmp
-rwx------ 1 oracle dba 20547 Jan 20 20:11 frmctrl
-rwx------ 1 oracle dba 13721638 Jan 20 20:11 frmcmp_batch
-rwx------ 1 oracle dba 12510975 Jan 20 20:11 frmbld
-rwx------ 1 oracle dba 15275747 Jan 20 20:11 frmweb
Any thoughts on the usage of "relink forms" vs. the make command? Or why I was encountering the error " No rule to make target"?
Bill

Hi,
Please see {thread:id=2426792}, appears that 11gR2 is not certified on Linux 6.
Cheers,

How to relink specific executables in OracleEBS11i on Windows using Adamin?

Hi,
I applied patch 4297568 (ILOG Scheduler Library 5.1.9) as a pre-requisite for 11.5.10 CU2.
One of the post patch steps is to relink specific executables. I want to know how to relink the following executable using admin on Windows.
MSO: MSONEW
WIP: WICDOL WICMEX WICMLX
WPS: WPCWFS
MSR: MSRNEW
MST: MSTNEW
ENG: ENCACN
I tried with admin and gave mso for the specific product but it didn't show the list of executables in mso product. when I gave fnd it gave me the list of executables.
Our env is Oracle EBS 11i (11.5.10) on Windows.
Thanks
Thiru

One of the post patch steps is to relink specific executables. I want to know how to relink the following executable using admin on Windows.How To relink a single executable via ADADMIN Utility [ID 388198.1]
I tried with admin and gave mso for the specific product but it didn't show the list of executables in mso product. when I gave fnd it gave me the list of executables.Can you reproduce the issue with other modules?
What is the status of mso product via OAM? Is it licensed and/or installed?
Thanks,
Hussein

Can we relink the executables for a particular schema using adadmin utility

Is it possible to do the following tasks for a particular schema (say inv):
1. Relink the executables for INV schema using adadmin utility.
2. Regenerate the forms for INV schema using adadmin utility.
3. Check if there are any invalid objects in the database where the issue is replicated INV schema.
Thanks,
Vijay

Hi,
Is it possible to do the following tasks for a particular schema (say inv):
1. Relink the executables for INV schema using adadmin utility.
2. Regenerate the forms for INV schema using adadmin utility.Yes, it is possible for specific schema -- See (Note: 141118.1 - How To Relink Forms Library Files Using Adadmin) for details.
3. Check if there are any invalid objects in the database where the issue is replicated INV schema.Through adadmin, it is not possible for specific schema. To check the list of invalid objects under the INV schema, you need to run this query:
SQL> select object_name, object_type
from dba_objects
where status = 'INVALID' and owner = 'INV';Regards,
Hussein

Relinking Forms and Reports executables

Hello All,
I am relinking forms and reports, using below commands, as part of Java 1.7 downgrade.
cd $ORACLE_HOME/forms/lib32
$ make -f ins_forms.mk sharedlib install
cd $ORACLE_HOME/reports/lib32
$ make -f ins_reports.mk install
What i found is, the timestamp of the files under these directories($ORACLE_HOME/forms/lib32 and $ORACLE_HOME/reports/lib32) is not that of today rather it's old timestamp. How to make sure that I have completed this task(relinking forms and reports executables) successfully?
Thanks,
Moor

Do you get any "Fatal Error" Or "Error Code" messages at the end of the log file?
Link fails applying Patchset 10.1.2.3: Error in invoking target 'proxy_install runm_install' of makefile ins_reports.mk (Doc ID 821253.1)
Relink Reports After Applying Any Patch, Getting Errors: collect2: ld returned 1 exit status, make: *** [rwbuilder] Error 1 (Doc ID 1218994.1)
Thanks,
Hussein

Timeline inside timeline: how to relink to original clips?

Hello. One of our editors has started huge project in FCP 7 from organizing every shoot day in separated timelines. Then he has started editing using these timelines like a source clips, so, finally we have "master edit" made using 10+ timelines, instead of source clips. Now I need to export an EDL file (master or source EDL - doesn't matter), and I can't: EDL file contain links to the timelines, used for edit, but not to the source files. Is there is a quick way how to relink enclosed timeline (cutted like normal source clip) in to the source clips, which were used in this enclosed timeline?
Thanks in advance,
Dmytro

Ahhh...thanks for the further explaination.
OK...did they build the main sequence out of the other timelines in that they appear as 10 solid, separate things? Or did he use them as source clips and cut several times? If the former, then it should be easier, just open the nests and copy and paste the original clips to replace the nests. If the latter...whoo-boy.
Talk to the client like this: Explain the issue with how he cut the sequence, how it is presenting a problem. Now, he can either pay your hourly rate to fix the issue so that you can online properly (which you'll be only so happy to do!), or you can offer that he fix it and save a few bucks. Up to them.
Or you can do it your way too...online each of the sequences separately...again, explaining that you'll be happy to do that, but also explain the time and storage involved in doing that.

How can Run Forms in Oracle9i DS

I have installed Oracle9i DS with complete option under Win XP Professional. I have now serious prob to run Form executables becoz of its new web technology.
1. when i run the form it gives error message, there is no HTTP listner on port 8888 in local machine.
Solution: Then i create the listner named HTTP and i gave port number 8888 and i started the listner.
2. Then again when i try to run, it opens the MSN explorer, but the opening process is going on without end.
Please give me a solution how to solve this problem.
--- Raj

I have the same problem here.
I have installed Oracle9i DS with complete option under Win XP Professional. Now I got the common problem
"HTTP listner on port 8888 in local machine has not started".
So, I started OC4J instance. But it gives message in command window like this
C:\Documents and Settings\Eugene>G:\oracle\OraDev\jdk\bin\java -Dorg.omg.CORBA.O
RBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inpris
e.vbroker.orb.ORB -Doracle.security.jazn.config=G:\oracle\OraDev\j2ee\Oracle9iDS
\config\jazn.xml -Doracle.home=G:\oracle\OraDev -DORACLE_HOME=G:\oracle\OraDev -
jar G:\oracle\OraDev\j2ee\home\oc4j.jar -userThreads -config G:\oracle\OraDev\j2
ee\Oracle9iDS\config\server.xml
Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized
Then it freezes... and nothing happens after that. Could you please, help me to figure out what can be preventing this service from starting. I don't think I have created any new listeners (don't know how to do it). I was palying with cauprefs.ora and cagprefs.ora files a bit, but now have restored them to the original state.
Thanks alot to everyone!
Yevgeniy

Query for oracle form executable

1)How can we run executable (Forms & Reports) generated by Form & reports utilities of Internet Developers Suit in two tier architecture.
2)We want to keep all executables at a particular location on our local server and run these from client’s (computer). I mean to say that run time engine for forms and reports to install at client withour using OAS.
3) How can we run the OC4J instance at client site? Although we do not want to install full IDS on client computer in two tier architecture

Ad 1). For production purposes you have to run your forms trough OAS (it's a licence thing, not a techie thing)
Ad 2). You could do some magic with network shares, etc. but again, see point 1
Ad 3). You don't want to run a OC4J instance for production purposes, since you cannot control client settings, etc.
So, in short: just buy the license for OAS and setup a proper server.

How to relink OPMN

We have an AS 9.0.4 installation on AIX 5.3 ML02.
After applying some APARs (AIX patch sets) we relink the AS 9.0.4 follow this Metalink Note: 245375.1
All the software, are relinked but I not see that the "opmn" are relinked (the executables in the /opmn/bin are unchanged and the libraries in the /opmn/lib to).
Obvious, the matter here, is the opmn don't start (opmnctl start) :((
The error in /opmn/logs/ons.log is:
SSLGetSGCClient in the libnnz9_dynamic.a
The news, if we reinstall the complete software the opmnctl start ran!
The OUI is doing something more, that the Note:245375.1!!!???
Tx,
Diego.

How about
ps -flu oracle | grep "opmn " | awk '$5==1 {print $4}'
You can combine grep with awk. The trailing space after "opmn" is to prevent showing processes with opmn in directory path such as my "/u01/app/oracle/product/10.2.0/crs/opmn/bin/ons" process.
You can also do something like
pstree -c -n -p | grep opmn | somestringprocessing
Let me know how it goes.
Yong Huang

Relinking of Executables

Would someone please point me to a well written explanation of what happens when Oracle executables are relinked and why that occasionally needs to be done? I also want to understand what the "link" is.
I am about to apply several Oracle patches and one includes instructions on executing the relink command in UNIX. I can execute the command, but I would like to understand why there is a need to do it and what effect it has.
Also, the patch instructions include instructions to re-link any customer executables. How do I know if I have any customer executables?
The instructions below are taken from the patch:
# This patch updates the client shared library.
# Please re-link all installed
# executables that are linked to this library
# ($ORACLE_HOME/lib/libclntsh.a).
# The simplest way to do this for Oracle executables is ;
# % cd $ORACLE_HOME/bin
# % relink all
# You will also need to re-link any customer executables using the client
# shared library.
Thank you,
Bill

Hi,
Relinking of executable means,
Generation of executable with updated library files which contains oracle internal functions etc. Most of the library files are found in $ORACLE_HOME/lib $ORACLE_HOME/lib32 directory. Only affected executables are generated or linked after the patch installation.
For a reference you can also look at following link which specified what make effect what executables (this link is old referring to 8i,9i databases).
http://ist.uwaterloo.ca/~baumbach/ORACLEnotes/STARTUP_relinking_oracle.html
Regards
Edited by: skvaish1 on Mar 24, 2010 12:15 PM

How to relink Oracle Binaries on Windows platform

Hi Gurus,
How to relink Oracle Binaries on Windows platform?
Database version - 11.1.0.7
Application version - 12.1.3
Thanks,
Khan

Hi Khan,
Running AD Relink
Run AD Relink as follows.
1. Set the environment.
You must set the environment to indicate the location of the configuration
parameters that define your system. This task is common to many AD utilities. See
Setting the Environment in Chapter 1.
2. Relink files.
Run AD Relink with the following command:
UNIX:
S adrelink.sh force=n "ad <executable name>"
Windows:
C:\> sh adrelink.sh force=n "ad <executable name>"
Additional Information: See Relinking AD Executables in Oracle
Applications Maintenance Procedures for complete instructions for
running this utility with the various command line arguments.Taken from R12 maintenance utilites documentation PDF.
Thanks
Edited by: EBSDBA on Sep 14, 2011 1:14 PM

How to take Form Tracking reports(Like C forms and H forms)?

Dear expert
How to take Form Tracking reports(Like C forms and H forms)?
thanks for Advance

hi,
this is to inform you that,
SAP has provided J1IUN, which might not be satisfying your requriment.
what we can do is to develop a Z report on the same and execute it
we have done the same in our previous assignment
hope this clears your issue
balajia

How to set form feed in output .lst file

sql >set pagesize 60
spoo abc
select * from xyz;
spoo off
In the file abc.lst header and placed details 60 lines. but at
the time of printing if paper lenght is 72 lines how to set form feed?

Try
set newpage 0

How to relink form executables - 6i

Similar Messages

Maybe you are looking for