How to Relink to Modified Files

I've looked everywhere, am at my wits end. I'm color correcting a film and ran all the used footage through noise reduction pass in after effects. The new files are the sime file type (prores 422 (HQ)), the same duraction, same start / end etc. The only difference is file size and creation date.
With FCP7, APP, Avid I can simply force a relink and have the editing software use the noise reduced files which I then export to Davinci. FCPX however, will not under any circumstances let me relink these new noise reduced files.
Anyone have any suggestions? I've generally liked FCPX until running into this. Manually replacing every instance of every clip is not a reasonable suggesion.
TLDR; Warn the user the files are changed, but GIVE THEM THE OPTION TO OVERRIDE.

The message FCPX gives me is:
"Incompatible file.
The original file and new file have no shared media range.
Relinked files must have the same media type, same frame rate, and similar audio channels as the original files, and must be long enough to cover all the clips that reference the files."
Here are the two inspector windows.
Original ProRes AE Processed ProRes
The differences I can see is that AE took out the Color Profile: HD (1-1-1), added a blank copyright field, has a different file size (probably due to easier compression due to noise reduction), and a more recent creation date.

Similar Messages

Relinking to modified file names is working in CS3 and not in CS2

We are trying to remove a few characters identified as illegal(cannot be used in the file names in Windows) from the file names and then modify the InDesign layout files to relink to the modified file names. We are using the InDesign CS3 server to open up the application and work on the layout files using Java and CORBA mode(used CS3 SDK). First we remove the illegal characters from the file names. Next we will go through all the links in a layout file and will identify the links with illegal characters and relink it to the modified files. The relinking will happen to only those files which has a state NORMAL before the file names are modified. This approach works fine for the CS3 files but for CS2 after the file names got modified the link rolls back to the file path on the original m/c where the link was created and the relinking is not working.
Have anyone did something similar to that, if so can you provide with some details on how to address this issue.
Do let me know if you need any more specific information for providing your inputs to address this issue. Any inputs will be highly appreciated.
Thanks

Thanks. I got it resolved by saving the document by passing in a OptArg.makeFile() instead of OptArg.noFile(). I modified this based on what I read from Adobe Livedocs which said that any CS2 file opened in CS3 will be converted to CS3 and will be considered as a new document.

How can I make a droplet save a modified file next to the original file?

I am having a problem getting a Photoshop Droplet save a modified file next to the original file. That is, when I drag a file "page_6.pdf" from some directory onto my droplet, I want it to do its work and save a modified "page_6.psd" in that same directory.
This isn't working for me on Photoshop CC 2014 on Mac OS 10.10.
I have an Action which has an Open command, with the filename "page_1.pdf". Then it has a bunch of editing commands. Then it has a "Save As... Photoshop format" command, and a Close command. When I run this action within Photoshop, it brings up Open and Save As dialogues, and works fine.
In creating the droplet, I used File... Automate... Create Droplet..., and selected the following options:
Override Action "Open" commands
Destination menu value = Folder
Using Choose... button, select an output folder, Directory_1/ .
Check Override Action "Save As Commands" is checked
For File Naming, I use [Document Name] + "_deleteme" + [extension]
When I drag a folder, say "page_5.pdf" from some directory onto the droplet, Photoshop runs the Action on the document. However, it saves the modified document in Directory_1/, regardless of where the original file came from. And it always names the modified document "page_1_deleteme.psd", instead of using the Document Name of the original file.
If I modify the Open command in the Action to mention a different file, then the droplet always names the modified document with that name. It's as if Document Name in the File Naming dialogue always reflects what's in the Open command in the Action. But -- I asked the droplet to Override Action "Open" commands!
When I set the Destination menu value to "Save and Close", then when I drag a file onto the droplet, the droplet opens a File Save dialogue and forces me to tell it where to store the file. I don't understand this behaviour, and have a hard time reconciling it with the documentation at Photoshop Help | Processing a batch of files .
(Interestingly, when Destination menu value = None or Save and Close, Photoshop displays an alert about overwriting an existing droplet when I click OK to save. But when Destination menu value = Folder, there is no alert about overwriting existing droplet.)
How can I set up a droplet so that it writes the modified file in the same directory as the original file, and with the same root filename, but a different extension to reflect the different output file format?
Has anyone else made a droplet behave this way on Photoshop CC 2014 on Mac OS X 10.10?
Thanks in advance for your help.

Thanks for your insights.
Does my Action need to include an Open command? I sure thought so, because of how the Photoshop Help | Processing a batch of files documentation describes 'Override Action “Open” Commands'.
"...If the action contains an Open command that opens a saved file and you don't select this option, the Batch command opens and processes only the file you used to record the Open command..." I don't want to operate only the file I used to record the Open command. However, this sentence doesn't say that an Open command should be part of a droplet Action.
"...Deselect this option if the action was recorded to operate on an open file..." Maybe I if I rethink my Action as operating on an open file, then the Droplet will take care of the Open for me. However, I have less control over the options the droplet's Open command uses.
I'll try disabling the Open command, and create a Droplet with that.

How do i fix a file where relinking or updating file is too slow and generating 60+MB pdf from a 4mb Indesign file?

I have an 18 page files linking several pdf images and working with this file is horribly slow. These pdf images(total of 15) easily take a min to relink or update (pdf's are at max 2mb but majority are less than 1mb). The Indesign file is only 4mb but when i export or print to pdf I get a 60-70mb file. Exporting or printing these 18 pages easily takes 30 min. I can't use the file with a higher display quality unless i have the patience of watching a plant grow on that day. I've read a majority of ways why InDesign would be slow. At work im operating Windows 7, Indesign 6 and I have 32MB of RAM. Extremely frustrating and reminding me of the days of dial up internet. I've already done a SAVE AS and tried to reduce linked files image size and to no avail has not helped. I was able to get my 72mb pdf file to reduce to 6mb after using Adobe Acrobat and getting rid of the hidden information but I lose alot of quality in the linework. I am guessing its because these pdfs are generated from Revit or Autocad is why it might be holding onto some hidden info. So how do i make this file work faster (relink,export,pdf etc)?

Just to note as well, InDesign only links to files, there's no embedding, you would see a 4mb file, but if it's linked to a 10mb pdf and it has to include all that PDF in the final file then it will be circa 14mb file.
What you have is a vector heavy PDF and there's no real way to reduce that without losing quality.
You may have better joy by opening the linked PDFS in acrobat and using File>Print and choose Adobe PDF (or another method) to basically refry the CAD pdfs.
I'd do this with a copy of all the files though just in case something goes drastically wrong.
Frankly, I feel it's the nature of how CAD pdfs are made that's causing the downfall here, refrying these and Printing these files to PDF removes a lot of the complicated things happening in CAD files and makes a very dulled down PDF version.
Once you've done this then try FIle>Export from indesign to make your pdf.

How to edit or modify a .swf file?

I am trying to edit a .swf file and make some changes in the css styles.How to edit or modify a .swf file?

You need the fla file that created the swf. You edit the fla and publish the swf. Swf's don't usually involve css styles.

How can I burn a disk of photos with a modified file name?

After importing photos from scan device, I use Photos > Batch > Change to rename files. When burning a disk the changed file names do not transfer with the image but use the original file name. How can I burn a disk of photos with the modified file name?
This is what I have done so far with no success.
Drag selected photos from Event to Burn Folder where the file names were changed. Burn folder lists file with original file name.
Drag albums to Burn Folder with the same result.
In Filer I am able to change the iPhoto Library > Master > Date > Filename and then drag to burn disk folder and see the changed name but this is a single file exercise without a view of the file's image, but to use the new file name in iPhoto events I have to repeat the naming convention.

File > Export.
In the resulting dialogue note the "Name" section. Choose to use the Title as Filename.
Regards
TD

Question. How do I update / modify my site? Do I work with the original file "modify"?

How do I update / modify my site? Do I work with the original file "modify"?

Not sure why modify is in quotes ... but yes you work with the original and then publish again or export the HTML again.

How to get rid of Index of file:///C:/Users/lago/AppData/Roaming/SpecialSavings/ Up to higher level directory Name Size Last Modified File:SpecialSavings_2.0

I am unable to uninstall this high risk addon shown below in Firefox Ad Data
Index of file:///C:/Users/lago/AppData/Roaming/SpecialSavings/
Up to higher level directory
Name Size Last Modified
File:SpecialSavings_2.0.0.crx 25 KB 19-Aug-12 6:03:42 PM
Anyone know how to get rid of it please?

I am unable to uninstall this high risk addon shown below in Firefox Ad Data
Index of file:///C:/Users/lago/AppData/Roaming/SpecialSavings/
Up to higher level directory
Name Size Last Modified
File:SpecialSavings_2.0.0.crx 25 KB 19-Aug-12 6:03:42 PM
Anyone know how to get rid of it please?

How and where to modify the BAI File for Electronic Bank Statement

HI,
Can anybody explaing me How and where to modify the BAI File for Electronic Bank Statement.
thanks
Sap Guru
kischowdary--gmail.com

Hi
Actually there were two formats BAI & BAI2, BAI2 format is latest one.
Please ask for the latest file from bank and try to process.
Thanks
Kalyan

How to relink files inside an avchd package ?

I messed up a library and lost a project, then I found a copy of it in the backup folder, now when I open the project it asked me to relink files, but a part of them are inside an avchd package. How to relink those files ?
Thanks

you mean to normally import them or is there a specific reimport function ?
Thanks

How can I read a file in a jar file and modify it?

Hi,
Now, there is a jar file which contains a file that I want to modify. How can I get the file. After I get the file, I will modify it and replace the file in jar file. How can I complete it? Thank you.

there is no direct method of updateing files in ajar file
u have to do it this way
u have to first unjar the file in a particular folder
using java code java.util.jar package
than through FileReader and FileWriter class u update ur
the file whichever u want to update
and then gain through java.util.jar package
u create ur jar file again

How can I modify File Explorer to open This PC by default, instead of the new Home view?

The methods that worked in Windows 8.1 no longer work. I tried this method but all that did was mess-up the Home view...
http://superuser.com/questions/819521/how-to-make-windows-10-file-explorer-open-this-pc-by-default

Hi,
First, I have to say, I cannot get direct way to point the File explorer to This PC as in Windows 10. As an alternative method, we can delete some things in 'Home' and attach 'This Pc' into it via Registry key. Make it look like that we open This
PC.
1. Click Windows icon and type regedit in
Search box, and click Regedit to open Registry editor.
2. Right click to export this key for backup: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\
3. Click Windows icon and type Folder option in Search box, and click
Folder option to open it.
4. Under View tab, clear the checkbox Hidden extensions for known file types.
5. Copy following lines into Notepad, and save it as Fix.reg on Desktop.
Windows Registry Editor Version 5.00
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace\{1CF1260C-4DD0-4ebb-811F-33C572699FDE}]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace\{374DE290-123F-4565-9164-39C4925E467B}]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace\{3ADD1653-EB32-4cb0-BBD7-DFA0ABB5ACCA}]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace\{A0953C92-50DC-43bf-BE83-3742FED03C9C}]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace\{A8CDFF1C-4878-43be-B5FD-F8091C1C60D0}]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace\{B4BFCC3A-DB2C-424C-B029-7FE99A87C641}]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\HomeFolder\NameSpace\DelegateFolders\{20D04FE0-3AEA-1069-A2D8-08002B30309D}]
@="This PC"
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\HomeFolder\NameSpace\DelegateFolders\{d34a6ca6-62c2-4c34-8a7c-14709c1ad938}]
@="Favorites Folder"
6. Double click the fix.reg and Press Yes to apply the changes.
Open the File Explorer again, and you will see the Volumes under Home View
Kate Li
TechNet Community Support

How to relink media in CS6

When I first open a project in PrPro it asks a strange request to relink media. No files have been moved and all my media is on one hard drive. I understand how to relink media but this is strange. It asks "Where is the File "V1-etc, etc, etc? I've never labeled a clip V1.
Could this be pertaining to the V1 video track?
Could this have happened if I updated PrPro, not thinking, with a Premiere Pro CC update on my CS6 program and this is causing the problem?
I have a timeline in PrPro that was worked on in Resolve. In the timeline it shows all my clips offline. But, in my bins, the clip that is shown offline in the timeline is ONLine in my bin.
How can I relink the media to get it to show correctly in the timeline.
I have a suspension this is a result of updating something I should not have updated.
Dan you advise?
Mandla

It seems PrPro created a bin as well. There's no way I'm creating a bin labeled like this. The one clip that you see is relinked was from me highlighting all the off line clips, choosing that clip to relink in the hopes that all would come online. This labeling doesn't make sense. I did have archived timelines labeled The Broken 527, but other than that nothing more.

How to tell if multiple files are selected when they are opened in windows

Hello, can someone help me, my question is how to tell if multiple file selections were made when they were opened (right-click->open). Through modifying the registry I already have my Java program start up when a file with specific extension is double-clicked.
The problem is when multiple files are opened at the same time, an instance of java program is created and run for each of the selected files. Ideally I would like it so that only one instance of java program is run, regardless of the number of selections.
When you try it with Microsoft media player or winamp for example, it seems that only one process is created and run (I don't see many processes spawning when I watch it using task manager). Maybe this is more of Windows issue rather than Java programming issue. Any help is appreciated.

If anybody wants to know, this can be solved by either 1) using DDE 2) using DropTarget (from Windows) 3) make a light-weight EXE dispatcher (eg. in C), and use file to have IPC between the dispatcher (which gets the filepath for each of the selections) and the java program. There can be other methods of course. Using the second option is the simplest but it requires WinXP and higher. I implemented it using option 3.. the downside of this is there's a warning message pop up when trying to open many (>20?) files at the same time by Windows. However, option 1 'seems' to have the same limitation. Having a java program created each time for each of the selections seems to be too slow, for viable option.

Error/warning message "you don't have permission to modify files in this network location"

Hi,
We have a windows server 2008 running, and we access it via remote desktop. And there's this certain folder that all users access, and where we save important files. So, since this is where important files are stored, we wanted to disable deletion (and if
possible moving) of the folder and everything under it. However, it's harder than i thought. Right now, we have the permissions "Delete" and "Delete files and subfolders" disabled already, BUT when we try to save a file to this folder,
we got this warning/error message:
"You don't have permission to modify files in this network location"
The file is saved however, but there's no content. But when we try to cut/copy an existing file to this folder, it works.
Does anyone know how a workaround on this issue. I've already spent days configuring the settings, and when one works, another issue comes up. This is really frustrating.
Thank you.

Hi,
What are NTFS Permissions and Share Permissions of the shared folder? If you remove delete permissions, when someone tried to create a new folder, they couldn't rename it. Without Delete permission, we can open, modify a file and save with the same file name
but cannot create a new file with a new name.
For more detailed information, please refer to the thread below:
NTFS Permissions Question - Allow creation but not deletion
https://social.technet.microsoft.com/Forums/windowsserver/en-US/3335a9b3-d49a-42f0-970a-3fe44b551274/ntfs-permissions-question-allow-creation-but-not-deletion
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to Relink to Modified Files

Similar Messages

Maybe you are looking for