How to remove a block of data in memory?
hello:
there is a block of data in memory, now i should add 4 bytes in them , so i should remove some data behind, i don't know what function i should use?
i think remove some data from one place to another is copy data from one place to another , is that ok?
Best regards!
future
I have some records in the internal table t_int1. I want to retrieve some set records from that table and put them all in some other table, based on a single field which is not a key. Can i use READ statement to achieve this.
Could you please let me know any simple way of doin this.
Answer :
data:
itab2 like standard table of t_int1 with header line.
Loop at t_int1.
read table t_int1 with index 1.
check ur condition----
check each line and insert it ---work out the syntax for this
IF t_int1-xyz = data1
append line of t_int1 to itab2. or try insert
cnt = cnt + 1 -
u will get no. of records added to next itab.
else.
cnt1 = cnt1 + 1 -
u will get no. of records not added to next itab.
endif.
end loop.
Similar Messages
-
How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?
Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed? -
How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?
Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed? -
How to remove payment block for AP invoices which has been cleared
How to remove payment block for AP invoices which has been cleared
Thanks
ChiruHi,
Thanks for immediate response in fb02 is in deable mode
mrbr unable to change
please provide to to remove blocking code i will assign points
Thnaks
Chiru -
How to remove a grobal parameter in SAP memory
As known to all, we can use SET/GET PARAMETER to pass parameters among multiple programs.
Now I'm just curious about how to remove a grobal parameter in SAP memory, and how can I get the list of all grobal parameter in SAP memory.
Any idea?Hi william,
1. how to remove a grobal parameter in SAP memory
Well, i dont think we can REMOVE.
At most, we can RESET it to blank(initial)
2. set parameter id 'BUKRS' FIELD ''.
regards,
amit m. -
How To remove billing Block collectively
Dear All,
We are having process of periodic billing in contracts
Kindly help me in removing the billing block of billing plan collectively of supose 10 contracts at a time of same period.
Thanxs
VijayDear Sir,
This is not working I needed to remove billing block of billing plan that also collectivly . By V.23 header data billing block can be removed collectivly
Thanks
Vijay -
How to remove extra spaces from Data Matrix Label?
Hi All,
Kindly let me know how we can remove extra spaces from Data Matrix Label.
Suppose we have this following code in SO10.
^FO1380,1879^COY,78^BY4^BXR,6,200^FH^FD[)>_1E06_1DF01001T_1D6JUN&v_huf&&v_hul&_1DV&v_supnum1&_1D16K&v_del&_1D6D&v_flddat1&095_1D2L&v_unload&_1D
P&v_article&_1D4L&v_madein&_1D_1E_04^FS.
Variable have there own value. and the desired result will be shown like the attachment.
But in my code it splits into new line when CMIR value has 3 spaces.
If CMIR value is 1S0 820 355 A . then it creats a new line.
Kindly suggest me any possible solution.
Thanks,
ParthaHi Gaurav,
In print preview we can't see any space or new line. But when it scanned by TSB (barcode scanner) it will generate a new line when there is 3 space CMIR value.
So where should I write SHIFT CMIR LEFT DELETING LEADING space this code?
Because there is no space coming at the time of debugging or print preview.
And in SO10 the code written as
^FO1380,1879^BY4^BXR,6,200^FH^FD[)>
Here CMIR value is 1SO 820 303 A
and generated output is like this.
And desired output should be like this. -
How to remove calender button beside date prompt in infoview
Post Author: Durga
CA Forum: Desktop Intelligence Reporting
Hi ,
We have developed one deski report which will run through infoview.
while opening in the infoview in the beside the date prompt calender button is appearing.
But we dont need the calender button beside the date prompt.we want to select from LOV's only.
Please advice how to remove the calender button in infoview which is developed in Deski.
Regards,
Durga.Changing the data of the date to char will get ride of the calendar control.
-
How to remove billing block for rejected order
Hi gurus,
There is a question about billing block that needs ur help..
A sales order's credit status in header level is "Not approved" and thus it's blocked for billing. We've rejected this sales order in all items, but this sales order is still showing in V23-Billing block report, how can we remove it from that report without changing Credit status?
Or we have to update the credit status and then reject it again?
Looking for your advice and thanks in advance.First tell me have you checked the credit status of that particular customer.
Have you rejected all the item in sales order of the same order in which you have set the credit limit.
then in that case you will have to increase the credit limit and then reject it.
I hope it completed your work
please let me know is it a proper solution. -
How to remove GR blocked Stock
Dear experts,
We found there is some stock in GR.Blocked stock, which we can can not release into unrestricted now as we have no pending
103 documents,how to make the stock into unrestricted.please suggest me.
Thanks in advance.
Varun
Moderator message:
Locked. Reason: basic question.
Please search before asking.
Edited by: Csaba Szommer on Dec 23, 2011 6:48 AMHi,
Please refer the below links hope it may help you
http://help.sap.com/saphelp_46c/helpdata/en/a5/6334ef43a211d189410000e829fbbd/content.htm
diffrence between GR Blocked stock and Blocked stock
Did you check MMBE to see the stock...
whether its showing there...
If its showing there...
Remove the stock from GR blocked stock...either via referencing the material document through which you post it to GR blk stock or via referencing the PO...
and release it to stock or consumption...
and then check ....
You can do above from MIGO itself...
Regards,
Udaya. -
How to read large blocks of data as quickly as possible in Labview?
<p> Hello friends,</p>
<p>I meet a problem in reading visa data. It's a usb-raw device, it needs a indepent thread to read the data without any delay(Thread priority Critical). I can do this in both CVI &Labview. The difference is, in CVI, I can exchange the buffer data(read by Visa-read) by exchange the pointer of the buffer, this could avoid data copy. But in Labview, how can I do this to avoid data copy which would delay the Visa-read loop?</p>
<p>PS. the data block(Buffer length) is big,512KB. And the length could not be small since it would make data loss. I have tested this. The program attached could work wihout problem, but if I try to show the data, there would be a data loss. How can I get it ?</p>
Attachments:
20141220122944.png 8 KBUse a Queue to send the data to another loop that can process the data. Have a look at the Producer/Consumer architecture.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions -
How to remove objects cached in data cache?
With following query, I can find out how the table cached in data cache with the indexes:
Select CacheName,DBName,OwnerName,ObjectName,IndexID,sum(CachedKB) as "CachedKb"
from master..monCachedObject
where ObjectName = 'invent'
group by CacheName,DBName,OwnerName,ObjectName,IndexID
order by CacheName,DBName,OwnerName,ObjectName,IndexID
Is it possible to remove the cached data for particular index from data cache? I want to verify the performance issue is on particular index and reproduce the performance issue.SImply unbind the objects from their named cache. Then, bind the objects again back to their named cache. The "re-bind" step doesn't have to be done if we are talking about "default data cache".
For objects bound to named cache other than "default data cache":
exec sp_unbindcache <dbname>,<tablename>,<indexname>
exec sp_bindcache <cachename>,<dbname>,<tablename>,<indexname>
Now data will be read from disk on first retreival.
For "default data cache" objects:
exec sp_unbindcache <dbname>,<tablename>,<indexname> -
Hi, I need help on how to remove my credit card data on my friend's iPad?
Hi, my friend borrowed my credit card to purchase smart office 2. I need help on how to change or remove my credit card details on her iPad. It turned out when I tried purchasing a game that i was again automatically charged. Thanks for helping me.
Settings->iTunes and App Stores->Apple ID->View Apple ID->Payment Information, Set the Payment Type to "None".
-
How to remove body from JMS data In OSB?
Hi
I am puttting xml type of data in a queue but the data is coming with body tag. My requirement is to place payload only in JSM queue without soap body.
Steps i followed are;
1. Created business service with
Service Type Messaging Service
Request Message Type XML
2. Created proxy service with
Replace [ entire node ] of [ . ] in [ body ] with [ $body ]
How to do that?
Thanks
VibhorAre you using the OSB test console to post the message?Have you ensured there is no <body> tag in the input?
I have checked what I have pasted above and it is working fine!
Thanks,
Prabu -
How to hide one block of data based on Filter selections
Hi,
I have a requirement where I should show only one block based of filter selections provided at the Query Level.
How can I achieve that?
Regards
ShirleyLets say you have a optional filter and you want to show block 1 if value are inserted and block 2 if no value selected.
For this You can create a variable status =IsPromptAnswered("") it will return 1 if prompt is answered.
In block property go to the hide if below formula is correct and for block 1 give status =1 and block 2 give status=0
I hope this will help.
Maybe you are looking for
-
How do I restrict PT60 Schema transaction to Personal Area?
I have tried to restrict it throgh personal area but no luck. Same with PPOME transaction even though the users have only restricted PA access but they are able to change Org structure. I ran the trace and it shows that it checked P_ORGIN for specifi
-
Select Query in the receiver JDBC
Hello all, Is it Possible to use the select query in eceiver JDBC. Thanks, Srinivasa
-
I restored my ipod 1 week ago but it says it needs to be restored again
i have an 5th gen ipod touch and last week it wanted to be restored for some reason i dont know. I restored it but now a week later it wants to be restored again but i almost installed nothing i just installed: youtube createrra elohell twitch and sk
-
Very Urgent- GRIR clearing in f.13
Hi SAP GIRUS, I am trying to clear GRIR Account using TCode F.13 . System is showing message " No clearing (difference too large)" . Dofference is of Rs. 0.48/. I have made all settings for tolerance- 1. Tolerance group for gl which include
-
How to set alarm for same date every month??
Is there a way (or an app) that will allow me to set an alarm for the 29th of every month?