How to remove a grobal parameter in SAP memory
As known to all, we can use SET/GET PARAMETER to pass parameters among multiple programs.
Now I'm just curious about how to remove a grobal parameter in SAP memory, and how can I get the list of all grobal parameter in SAP memory.
Any idea?
Hi william,
1. how to remove a grobal parameter in SAP memory
Well, i dont think we can REMOVE.
At most, we can RESET it to blank(initial)
2. set parameter id 'BUKRS' FIELD ''.
regards,
amit m.
Similar Messages
-
How to set a checkbox parameter in sap crystal Report
Hi Experts
SAP B1 crystal Report How to acheive the check box as a parameter.here i attached the screen shots.
Regards
VinothHi,
Please check this thread. Do not post multiple threads on same subject.
http://scn.sap.com/thread/3520806
Thanks & Regards,
Nagarajan -
How to add some extra parameter in SAP instance profile
Dear Gurus,
I want to add login/min_password_lng and login/fails_to_user_lock in my instance profile.Please guide me the steps how I can add this by using RZ10 T.Code so that it takes changes in program RSPARAM.In our scenario we have 1 CI server and 2 application server.
Please guide me the steps so that I add this parameter.
Advance Thanks
NirmalHi,
1. Execute RZ10 T-code
2. Choose the Instance Profile such as <SID>_DVEBMGS00_<HOSTNAME>,<SID>_D00_<HOSTNAME>
3. In Edit Profile , select "Extended Maintenance"
4. The Profile will be open in Display mode. To Add/change the new Profile Parameter, the Profile needs to be in Change mode.
5. To add New Profile Parameter Push Create/ Press F5,
6. New Screen will be generated with Parameter Name and Parameter Value Inputs. Provide the required parameter name and its value (in your case [login parameters|http://help.sap.com/saphelp_nw04/Helpdata/EN/22/41c43ac23cef2fe10000000a114084/content.htm]). Then Press Copy.
8. Once the changes are made, choose Copy to return to the initial screen of Transaction RZ10.
9.Then save and activate the profile that has been changed.
10. After this the instance has to be restarted.
Regards,
Bhavik G. shroff -
How to remove the window border in SAP Script
Hi,
In my requirement when I create any window in SAP Script, in the output the border around the window should not be displayed.
Request to suggest how to proceed on this.
Thanks,
NareshHi.
I assume that in the window's code, there is a "BOX" statement. Just comment it out and you are done. If you are using SMARTFORM, there is a respective checkbox in the windows properties.
Reward please if it helps.
Regards,
George -
How to remove the Tcode SU01 from sap menu for a role
I want to create a role to assign to the users who are prohibited to change their own user data.So I want to give it all authorizations but su01,how to achieve it?
Message was edited by: begue longHi Manohar,
You do not need to give them authorizations for <dummy>, unless the user group realy is "<dummy>" without ". Very unlikely and hardly appropriate...
Here, <dummy> is coming from the abap language element
DUMMY
From the ABAP keyword documentation: "The authorization check is successful if one or several authorizations are created for the authorization object in the user master record and if - for at least one of the authorizations - each of the value sets defined there for the authorization fields specified using FIELD includes the value val1 ... val10 to be checked. Authorization fields that are not included in the statement or that have DUMMY specified for them are not checked. If the check is successful, sy-subrc is set to 0. Otherwise, it is set to a value not equal to 0."
Be carefull of ST01. It is a great tool, but does have it's technical limitations.
Kind regards,
Julius
Message was edited by: jbussche -
How to remove a block of data in memory?
hello:
there is a block of data in memory, now i should add 4 bytes in them , so i should remove some data behind, i don't know what function i should use?
i think remove some data from one place to another is copy data from one place to another , is that ok?
Best regards!
futureI have some records in the internal table t_int1. I want to retrieve some set records from that table and put them all in some other table, based on a single field which is not a key. Can i use READ statement to achieve this.
Could you please let me know any simple way of doin this.
Answer :
data:
itab2 like standard table of t_int1 with header line.
Loop at t_int1.
read table t_int1 with index 1.
check ur condition----
check each line and insert it ---work out the syntax for this
IF t_int1-xyz = data1
append line of t_int1 to itab2. or try insert
cnt = cnt + 1 -
u will get no. of records added to next itab.
else.
cnt1 = cnt1 + 1 -
u will get no. of records not added to next itab.
endif.
end loop. -
How to clear the values present in SAP memory.
Hi,
i am building a module pool program in that im using subscreen which is designed as 'selection-screen 0500 as subscreen.'
when we validate the selection screen elements, if it come acrosses any error condition it disables every field in theselection-screen enabling the error field(error value is still present). this works fine here.
but i need to clear the values present in that field.to retain the values im using memory ids.
solution required immediately.
Thanks,
Nagaraju.Hi,
Use FREE MEMORY.
FREE MEMORY deletes the entire ABAP memory including all the data that was exported with EXPORT TO MEMORY ID key.
If helpful pl reward.
Cheers... -
How to remove "Other" from my iPhone 5 memory to free up space?
I tried doing a rest and it didn't help my problem. Are there any other things I could try?
jessraygor wrote:
... Any suggestions other then the reset to "new Phone"
No.
Other is usually around 1 GB...
A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup... But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup... Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414 -
How to use list box parameter in crystal Reports
Hi Experts,
How to acheive list box parameter in sap B1 crystal reports.
Regards
VinothHi,
check this thread
Crystal Report Drop Down Selection List
Drop down list parameter
https://scn.sap.com/thread/1782598 -
How do remove commitment value in the PO ? any SAP note avl?
Hi,
Project (WBS)releated service PO (Account assignment category P and Item category D), in which SES,GR,IR have been completed for entire Project services for the year 2005,PO history also updatd for SES, GR,IR in the 2005 only.But Now system is showing still commitment value in the PO for the year 2009?.
Henece how do remove the inconsistency of the commitment value in the PO for the year 2009?. (i.e value is comming from COOI table entry).Is there any SAP NOTEs are available for this case?
Note:
But this case no PR has been refered in the PO. PO has been directly created, and PO QTY,Value changes have not been done after SES,GR,IR completion.
But still system commitment value is showing in the PO for the year 2009, so HOW do remove the value?
i am looking suitable answers.
Regards,
kumarHi,
Pre-requisites for a commitment update are:
o In transaction OKKP, the commitment management indicator must be
active for the given controlling area in the current fiscal year.
The controlling area is the highest organizational unit in Controlling,
however this area is missing from the accounting data of the PO.
o The accounting objects must be active for commitments:
- Work orders: The commitment management indicator must be set
in transaction KOT2 for the given order type.
- Cost centers: In transaction KS02, in register "Control", the
commitment update indicator must NOT be set.
- Projects: see note 47992
o In transaction CUNI, the unit of measurements used at item level
must be set to value based commitment.
Please check the following notes 152571, 634298, 459509 and
772206 carefully and also 165823.
Please check also if the "delivery complete" indicator is set in the PO item (see note 735404).
Usually for service POs the "Delivery completed" indicator will be
hidden and this indicator is fully controlled by the "final entry
sheet" indicator in ML81N. You must allow to set this indicator trough a field selection customizing for your PO item.
Regards,
Edit -
Hi,
I created SAP BO Explorer report on top of SAP BEx Query.
In SAP BEx Query, Decimals were hided but when i created OLAP Universe on top that SAP BEx Query and Created Index on top of Information Space in SAP BO Explorer and then created Exploration Views. But i'm getting Decimals in my Exploration Views where as SAP BEx Query in RSRT, no decimals were appearing.
Can anyone suggest me how to remove decimals in SAP BO Exploration Views.Hi Ramana,
I am not use how you connect to SAP BEx query (Via universe or BWA or HANA)
What I could say is BWA and HANA, you cannot adjust this
For universe, you could try in universe layer, there is note about this
For BWA and HANA, this function might be enhanced but you 'd better raise OSS to SAP to check with them
Best regards
Alex yang -
How to define the application parameter 'sap.xss.BaseConfigurationID'
Hello All,
I am developing a webdynpro ESS custom self service application. I have completed the development of the DC. But at the end when I am creating the application for the DC, I am not able to figure it out how to define the application parameter 'sap.xss.BaseConfigurationID' for the application. I have defined remaining all the parameters as specified in the following link.
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/43/3b95dab4ab1800e10000000a1553f6/content.htm]
Could any one please detail the process to define the parameter 'sap.xss.BaseConfigurationID' ?
Thanks a lot.
Regards,
Seshu.Pick a representative file.
Get info. (Command-i)
There you will see a place "Open with" where you can select the application for that file.
Hit the "Change all..." button to do this for all files of this type.
charlie -
How to Remove the underline from the selection screen parameter
How to remove the underline from a selection screen parameter ?
>
Anoop Menon wrote:
> hi Avinash,
>
> I am not able to understand the use of the 'comment line properly.
>
> The last part of the statement which says modif id is confusing.
>
> Please clarify..... I am unable to activate my code when I put the selection screen commebnt statement.
Use this and update it to your requierement !
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 1(30) comm.
PARAMETERS test(1) type c.
SELECTION-SCREEN end of line.
INITIALIZATION.
comm = 'test'. -
How to pass multi value selection parameter to SAP Function Module?
Hi ,
Anyone know how to pass CR multi value parameter - array to SAP Function module ?
eg multi selection of customer in CR
and then pass to Function module
in SAP FM, the SQL select these customer only
How should the import parameter / table of SAP Function module designed?
and how should CR pass the data to SAP FM
thx
JohnMoved to Integration Kit forum
-
How to remove one sap Instance where 2 instance running in same server
How to remove one sap BW Instance from server where 2 instance running in same server.
We have 2 BW Instances ( QW1 and CW1) running in the same physical server (windows 2003 + MSSQL). Now we want remove one Instance from the server completly. Could any one give steps or procudure which we should follow to remove one instance without disturbing another one. Both instances are Central Instances.
SAP System component version: SAP NetWeaver 2004s (2007)
Please help me in this...let me know if you need any more inforamtion.
Thanks in advance.
SridharHi Sridhar,
You can definitely remove an instance completey. When you select uninstall option using sapinst, it will give you a list of running instances on the node using profile files.
You can select which one to uninstall.
Best Regards
RAGHU
Maybe you are looking for
-
Having problem with textHeight
Hi, I'm trying to create a menu like a list. Data are from XML (ASP). The problem is I just can't tell Flash to use the textHeight data for calculating the distance between two items. When I trace the textHeight, the data is correct, but the final lo
-
Manually trying to set up Linksys wireless router.
To make a long story short I hit something on my macbook so that whenever I put a new application into the system it never loads the cd with the right program. I am trying to manually connect my wireless router. I know the default address for most Li
-
List of variables/tokens (like ${flexlib}) in mxmlc?
hi, I sometime saw the use of special token like ${flexlib}, ${document} to specify flex library path (mxmlc or flex builder compiler options), I searched the net but can't find much info about such variables. Does anyone know where or how can I list
-
Failed Run Task Sequence Error (0x80070570)
Hi, I Have problem with deployment windows vista enterprise: Failed to Run Task Sequence An error occurred while starting the task sequence (0x80070570).For More information, please contact your system administrator or helpdesk operator. It's possibl
-
There is constant flickering or blinking on pages.
This is so annoying. The web pages flicker or blink especially when the cursor is is passed over the top of the webpage where the toolbar, shortcuts and open tabs are. Sometimes it blinks even if the mouse is not being used. Some suggestions that I h