How to remove or cancel TR created due to 651 warehouse Mvt Type from LB10

Hi friends,
Before configuration as No TR creation for 651 Warehouse Mvt Type, some TRs had created for 651 Mvt Type. What can be done to remove them from LB10 transaction output?
Or if it will remain there will make any difference?
Please help me.
Regards
Siva

Hi,
In LB02 you can set 'final delivery' for the related TOs. After that you can create TRs manually or you can do the necessary movements manually via TO (LT01, LT10).
/Check the related interim storage bins and I think it will be clear what to do. [after confirming TOs, interim storage bins' balances have to be 0 and your stock levels in WM should be in harmony with IM stock levels]/
(I don't know this WM movement type but I think maybe you can apply the suggestion above)
BR
Csaba

Similar Messages

  • How to remove save, cancel option when end user runs the workbook in Portal

    Hi,
    how to remove save, cancel option when end user runs the workbook and make some small changes like using page items or increasing rows and columns
    I already made 2 changes
    1) I removed the option in Oracle Enterprise Manager under discoverer viewer of saving
    2) I also removed the option of Allow saving changes made in Viewer when adding workbook to portal
    But still the end user gets options of saving when made small changes to workbook like increasing rows and columns
    Is their any place, I need to make changes?
    Thanks in Advance
    Rowdheer

    Don't use JSP to serve a binary file. It almost implies the use of awful scriptlets and the invocation of both the response writer and the response outputstream which would only lead to IllegalStateException headaches in the server logs.
    Use a Servlet instead. Specify the file name as request parameter and let the servlet read the file and write it to the outputstream of the response.

  • How to remove games (which i doesn't exist in my iOS device) from game centre?

    How to remove games (which i doesn't exist in my iOS device) from game centre? Thanks for help.

    Take a look at this Apple support article; it may help:
    One computer using multiple iTunes Store authorizations
    When i want to buy items from itunes from a new device , it asks for my bank card number , and takes 1-2 dollars from it. Is this ok?
    I'm not sure what you mean by this. What "items"? If you are referring to music, videos or movies, you get only one download per purchase, so if you buy the items again, whether from another device or the same one, yes, you will be charged again. Only apps allow redownloading without additional charge.
    Regards.

  • How to remove dg broker and create 2nd physical standby?

    We have a dg broker setup 2 years ago for our production DB for DG standby. But we never used it. It kept down since then. However, we still have the configuration in the database like this:
    Primary:
    log_archive_config string DG_CONFIG=(dxp1p, DXP1P_STD)
    log_archive_dest_1 string location="/u04/dxp1p/archive", valid_for=(ONLINE_LOGFILE,ALL_ROLES)
    log_archive_dest_2 string SERVICE=DXP1P_VA MAX_CONNECTIONS=3 REOPEN=60 db_unique_name=DXP1P_STD
    dg_broker_config_file1 string /u01/dxp1p/data/dgconf1.dat
    dg_broker_config_file2 string /oracle/product/10g/dbs/dr2dxp1p.dat
    dg_broker_start boolean FALSE
    1st Standby:
    log_archive_config string DG_CONFIG=(dxp1p, DXP1P_STD)
    log_archive_dest_1 string location="/u02/dxp1p/archive/" , valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=DXP1P_STD
    dg_broker_config_file1 string /oracle/product/10g/dbs/dr1dxp1pdr.dat
    dg_broker_config_file2 string /oracle/product/10g/dbs/dr2dxp1pdr.dat
    dg_broker_start boolean FALSE
    When I tried to logon to dgmgrl, got this message:
    ORA-16525: the Data Guard broker is not yet available
    I would like to remove the dg broker and let the current standby continuing running normal. Plus I would like to add another standby database to the primary at different location. I tried to change:
    log_archive_config to 'read, receive, nodg_config'
    log_archive_dest_2 to 'SERVICE=DXP1P_VA LGWR ASYNC=20480'
    It seems breaking the archive send, and got the message from alter log:
    =================================================
    Errors in file /oracle/admin/dxp1p/bdump/dxp1p_lns1_29074.trc:
    ORA-16057: DGID from server not in Data Guard configuration
    LNS: Failed to archive log 4 thread 1 sequence 168101 (16057)
    Mon Jul 30 17:47:27 2012
    Errors in file /oracle/admin/dxp1p/bdump/dxp1p_arc0_5962.trc:
    ORA-16057: DGID from server not in Data Guard configuration
    Mon Jul 30 17:47:27 2012
    FAL[server, ARC0]: Error 16057 creating remote archivelog file 'DXP1P_VA'
    FAL[server, ARC0]: FAL archive failed, see trace file.
    Mon Jul 30 17:47:27 2012
    Errors in file /oracle/admin/dxp1p/bdump/dxp1p_arc0_5962.trc:
    ORA-16055: FAL request rejected
    ARCH: FAL archive failed. Archiver continuing
    Mon Jul 30 17:47:27 2012
    ORACLE Instance dxp1p - Archival Error. Archiver continuing.
    Mon Jul 30 17:47:57 2012
    Thread 1 cannot allocate new log, sequence 168102
    Private strand flush not complete
    Current log# 4 seq# 168101 mem# 0: /u02/dxp1p/redolog/redo04a.log
    Current log# 4 seq# 168101 mem# 1: /u03/dxp1p/redolog/redo04b.log
    Beginning log switch checkpoint up to RBA [0x290a6.2.10], SCN: 12200747321258
    Mon Jul 30 17:47:57 2012
    Thread 1 advanced to log sequence 168102 (LGWR switch)
    Current log# 5 seq# 168102 mem# 0: /u02/dxp1p/redolog/redo05a.log
    Current log# 5 seq# 168102 mem# 1: /u03/dxp1p/redolog/redo05b.log
    Mon Jul 30 17:47:58 2012
    ARC1: Archivelog destination LOG_ARCHIVE_DEST_2 disabled: destination Data Guard configuration error
    =================================================================
    I changed back right away since this is critical production DB. Maybe it works, but I may not wait enough long time for the archive send resume? I will also need to create 2nd standby. My plan is to remove the dg broker, since this is not used for long time anyway. To add 2nd standby by changing the primary DB parameter log_archive_dest_3.
    Please advice. Thanks!

    Hello;
    Would follow this note :
    How to Safely Remove a Data Guard Broker Configuration [ID 261336.1]
    What type of second Standby, just another physical ?
    Since you don't find my information helpful I won't waste anymore of your time.
    Best Regards
    mseberg

  • How to remove duplicate entries in OID due to an AD-OID bootstrap

    Don't worry about the "why" but there were changes made to the mapping file for an AD-OID synch and dipassistant commands mp and bootstrap run and now there are some duplicate entries for users in OID. The only difference between the duplicates for each of those user (besides the creation/modify timestamps) is their ORCLGUID. Their orclobjectsid, orclobjectguid, dn, uid, etc. are the same. Also, our OID is used for SSO to an oracle portal. So ... is there any way to programmtically get rid of the duplicates or do I have to manually go through and delete. And if manually, which one of the two should be removed? The one created first or last?
    You'll have to excuse myself and my co-workers 'cause we're still newbies when it comes to OID. :-)

    Found an easier way to delete my unwanted users ... Softerra LDAP Administrator 3.5. :-)
    After I did the deletes, we implemented a new mapping file (see my post at Changing Domain Rules in mapping file for Active Directory-OID synch ) and ran bootstrap. Now I just have to update the GUID and DN in portal.wwsec_person$ with the new orclguid and dn from OID for each affected user.

  • WM-TO can't be created for STO Returns (IM mvt type 673-WM mvt type 602)

    Dear Gurus,
    When I do the STO Returns with Billing (Company Code to Company Code), after Post Goods Receipt in Return Delivery Order (in material document, system shows that IM mvt type is 673; WM mvt type is 602), and no TR created. This makes me not able to do the next step to create TO to put the stock in bin.
    So, I go to this configuration:
    Logistics Execution \ WM \ Interfaces \ Inventory Management \ Define Movement Types \ LE-WM Interface to Inventory Management
    and look for the row that link between IM mvt type 673 and WM mvt type 602 to tick on Create Transfer Requirement (X). However, I couldn't see this link between the 2 movement types.
    Please help how I can put stock in the bin (not using LT01) for this case.

    Please update the missing link in the configuration between the two movement types. I assume that your receiving storage Location is Warehouse Managed.
    Since the Goods Receipt for a Return deliver has already been executed, check whether the quantity has been receiived with special returns stock category. You have 2 options
    1. Check whether any open Transfer requirements are created from the receipt and convert the TR in to TO.
    2. Reverse the PGR and redo it again and receive the Material in warehouse Bins.
    Let me know if it works.

  • Creating two materials doc in mvt type 101

    Hii,
    In which stuation two materials documents are created in mvt type 101 (for PO)
    the material is valuated at Moving avarage price.

    Hi,
    For subcontracting PO's...

  • How to remove a cancelled Mavericks installation from applications?

    Hi, > i'm very untechnical.
    I started downloading Mavericks a while ago but changed my mind in the middle of the installation and pressed cancel since I'm afraid I have plugins on my computer that are not compatible with it. In my applications folder I can see the Mavericks and how long it had installed before I cancelled it, there's this little stripe.. I want to clean up a little and remove the mavericks download, afriad it takes up some diskspace or just ***** up for my apps on the computer, is this just something i created in my mind?  Anyway, if I delete it, I can always get it from apple support right..
    When I try to delete the Mavericks from my application folder, it says "Some of the items you are moving are in use by another application and that it could cause some problems for my apps". Hm, is this an error message to ignore, or is there another way to get around this?
    Best,
    Leyla

    Leyla,
    the partially downloaded Mavericks installer will only take up disk space; its mere presence won’t affect the apps on your computer.
    Have you tried restarting your MacBook Pro, logging in, dragging the Mavericks installer to the Trash, and then emptying the Trash? Do you still get the “in use” message that way?

  • How to remove build errors while creating an Order App. for Handhelds

    Hi Friends,
    As per the Tutorial: Developing an Order Application for Handhelds provided at the given link http://help.sap.com/saphelp_nwmobile71/helpdata/en/8F/0B674240449C60E10000000A1550B0/frameset.htm
    I am creating mobile application for PDA . I have finished many steps but at one step I am getting build errors.
    The step is when we create service and paste the code provided in the document.
    public void generateTestData() {
    //@@begin implementation
          if( !(((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).getOrderOrderheaders().size() > 0))
             OrderOrderheader order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
             order.setOrderid("0023378");
             order.setLongtext("Repair front door");
             order.setServiceunit("SU01");
             order.setCreatedOn(Date.valueOf("2007-06-30"));
             order.setCreatedAt(Time.valueOf("08:45:00"));
             order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
             order.setOrderid("0024897");
             order.setLongtext("Analyse malfunction");
             order.setServiceunit("SU01");
             order.setCreatedOn(Date.valueOf("2007-07-01"));
             order.setCreatedAt(Time.valueOf("09:00:00"));
             order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
             order.setOrderid("0034534");
             order.setLongtext("Repair escalator");
             order.setServiceunit("SU03");
             order.setCreatedOn(Date.valueOf("2007-07-03"));
             order.setCreatedAt(Time.valueOf("19:45:00"));
             order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
             order.setOrderid("0024589");
             order.setLongtext("Analyse computer problem");
             order.setServiceunit("SU04");
             order.setCreatedOn(Date.valueOf("2007-07-01"));
             order.setCreatedAt(Time.valueOf("15:45:00"));
             order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
             order.setOrderid("0027890");
             order.setLongtext("Repair door lock");
             order.setServiceunit("SU03");
             order.setCreatedOn(Date.valueOf("2007-07-05"));
             order.setCreatedAt(Time.valueOf("10:00:00"));
             OcaRoot.getInstance().commit();
    //@@end
    The issue is I am getting a red line below each set methods as I have shown by underlining. I am struggling with how to rectify the error.When I write ORDER and write . after it , it shows only get methods in the popup not the set methods.
    Please suggest .
    It will be a great help.
    Regards,
    Nitesh

    Hi Nitesh
    Check if the data object you created is bi directional in DOE?
    Regards
    Vidyadhar

  • How to remove hard drive to create external back-up drive

    All,
    I have an old Powerbook G4 that has seen better days... I'd like to take the hard drive out of it an make myself an external back up drive.
    Has anyone done this?
    Lindsay

    That should function just fine, with one possible exception. Some very old 2.5" HD's were up to 12.5mm tall (and now at least one of the newest high capacity/300GB drives is over 10, but you don't have to worry about that in your case), and as the specs for this particular case state, it can accept a max height of 10mm. I don't know if Apple ever used 12mm drives in TiBooks, but I don't think so. Even my older Pismo HD is 9 or 9.5mm.
    And from your OP, it sounds like you're retiring the TiBook and using its HD as backup for your new MB, which has USB2, so as you say, speed shouldn't be a concern in that situation.

  • How to configure ATP check for "create standard order in SD (OR type)"

    first, I had check my stock, I only have ten PC
    , but when I enter 100 PC in a OR order, and issue ATP check, it is carries out, why? I had set availavility check into 02 in MRP3 view

    Availability check
    1. Availability check is an integral part of the business process that determines if the required delivery quantity can be met on a required delivery date. For this purpose the system takes into account pre-delivery activities such as scheduling for picking or packing times and the time taken to produce or obtain the material. It also performs several background functions such as Backorder processing, rescheduling and ATP quantities.
    2. Backorder processing: processing of a sales order that has not been fully confirmed or not confirmed at a certain delivery date.
    3. Rescheduling: is a proposal of how u2013 confirmed quantities already assigned to a sales order can be reassigned to other sales orders that have a higher priority.
    4. Available to promise (ATP): is a process of checking the available quantities of a material. The ATP quantity consists of warehouse stock + planned receipts (incoming stock) u2013 planned issues (outgoing stock). to examine stock on hand (CO09) proceed to logistics u2013 sales & distribution u2013 sales u2013 environment u2013 availability overview.
    5. Replenishment lead time (RLT): is the time taken for the material to become available either internally (in house production) or externally (from a vendor). The most important things to consider during an external procurement are purchasing and MRP2 (procurement) views of MMR where the processing time for purchasing, planned delivery time and goods receipt processing time are taken into account. On the other hand internal procurement is based on in house production time (MRP 2 view) goods receipt processing time or alternatively RLT time, which is found on MRP 3 view.
    6. RLT (Replenishment Lead Time) is the time taken for the material to become available. RLT is only used when doing an ATP check (Available To Promise). The value of RLT for a material is specified on material master record.
    7. There are three types of availability checks u2013
    Check on basis of ATP quantities.
    Check against product allocation.
    Check against planning.
    Configuring Availability check through Checking Groups
    1. The checking group + checking rule determine how the availability check is to be performed.
    2. The checking group determines whether and how the system checks the stock availability and generates requirements for material planning. The checking group defines what type of requirements will be passed on i.e. summarized requirements (daily/weekly) or individual requirements for each sales order.
    3. The checking rule applies to how the availability check is to be carried out at the transaction level. Note that you must define checking rules for each individual application such as for production orders for example. In Sales and Distribution, the checking rule is specified internally within the system and cannot be changed.
    4. The checking rule, in conjunction with the checking group, determines the scope of the availability check for every business operation; that is, which stocks, receipts and issues are to be included in the availability check and whether the check is to be carried out with or without the replenishment lead time.
    5. Briefly explaining the above u2013 checking group determines which type of requirement to be passed on to MRP whether it be individual or summarized and checking rule which is at the transaction level and can be configured independently for each application module, determines which stocks, receipts and issues to be taken into account. For performing an availability check checking group has to work in conjunction with checking rule.
    6. Advantages of individual processing over summarized processing u2013
    Backorder processing is possible.
    You can access (MD04) order, line and schedule line individually which gives a greater control on available stock and requirements placed on stock.
    The system automatically uses individual requirements in case of special stock items.
    7. Required data for the Availability check to be carried out u2013
    The Availability check must be switched on at the requirement class level.
    The Availability check must be set at the schedule line level.
    A requirements type must exist by which the requirements class can be found.
    A plant must be defined in the sales order for each schedule line item (in other words plant must be defined for every material in MMR).
    A checking group must be defined in the material master record in the MRP3 screen in the availability check field.
    8. Configuring Availability check and defining Checking Groups u2013
    Checking groups are introduced into the sales order based on the setting in the material master record.
    SAP standard checking groups are 01 u2013 summarized requirements and 02 u2013 individual requirements or you can create your own by copying the standard ones.
    Total sales and total deliveries columns are there to configure a checking rule to sum up requirements to post to MRP either individually or by day or week.
    Block quantity required can be set if you want several users to be able to process the material simultaneously in different transactions without blocking each other.
    The no check indicator is CHECKED when you DO NOT want the system to carry out ATP check.
    9. Defining material block for other users u2013 the block check box is an indicator that enables you to block material master records of a particular material during the availability check and restrict other users from accessing same master record and reserve the material. If the block is not set, two users can confirm the same material at the same time for two different orders, not knowing if the stock is available or not. If you select this field, the material is blocked during the availability check and other users cannot: a) Make changes in the material master record. b) Create purchase orders for the material. C) Create orders for the material.
    10. Defining default values for checking groups - Checking groups are introduced into the sales order based on the setting in the material master record.
    However if there is no entry present in the material master record for the checking group, a default value can be set here, depending on material type and plant.
    This default value will be used by the system depending on the material type mentioned in MMR and plant in sales order.
    If an entry exists, this default value is over written by MMR.
    11. Controlling Availability Check u2013 in this section, you tell the system what stock on hand and what inward and outward movements of stock it must take into account when performing the availability check in addition to whether or not to consider the replenishment lead time.
    12. These settings are based on the checking group that is assigned to the material master record and the checking rule that is predefined and assigned to the sales and distribution transaction.
    13. These settings carry out control both for sales order and delivery as well. This is due to the fact that you may want to include specific stock or incoming stock for the sales order, yet at the time of the delivery only include physical stock on hand waiting to be shipped.
    14. It is possible to indicate to the system that you would like the availability check NOT TO CHECK the stock at the storage location level. This indicator is used to set the scope of the availability check.
    15. It is used to switch off the check at storage location level. You create a reservation for a particular storage location. However, the scope of the availability check is set in such a way as to exclude the storage location. In this case, the system carries out the check at plant level only and does not take the storage location into account that is specified in the reservation.
    16. Should you not want the system to automatically check RLT, you may indicate so here. RLT is the time taken for a material to become available. It is only used when doing an ATP check and is taken from MMR.
    17. defining the elements in the availability check entirely depends on the business needs, but a few tips are given under u2013
    When controlling the Availability check at the time of the sales order, a purchase requisition does not necessarily indicate by it is going to come into the plant.
    A shipping notification on the other hand - a confirmed purchase order u2013 is a good indicator of receiving stock on a specified date.
    It is always recommended not to select the shipping notifications for the delivery requirements type as you may not actually receive the stock into plant or warehouse for which you are creating a delivery.

  • How to remove an account on the mac without the music being deteleed from the iPhone and ipod

    I would like to remove all m music on my mac but when i went to delete all the music and it said if i remove or delete it would also delete my music on my iPhone

    Morning rzayas59,
    Thanks for using Apple Support Communities.
    The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them.
    You can sign in to another iTunes Store account on your iOS device by following these steps.
    For more information on this, take a look at this article:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Best of luck,
    Mario

  • Loop I created: how to remove?

    Hi,
    I've been 'hitting' the 'delete' button to no avail to remove a loop I created. Anybody knows how to remove a loop I created accidentally? I don't want to know how to remove loops provided with the software. I only want to remove my own loop. Thanks.
    Using Logic Pro X V10.0.4 with Macbook air 2013.

    Try this:  1st go to your project settings>assets and make sure that the first box (copy audio files into project) is not checked.  Then drag your loop into the project.  If it is a MIDI loop you will need to drag it to an audio track, if it is an audio loop then drag it to a blank area of the arrange and a track will be created.  Need I say you should do this on a fresh project in case there already is a copy in the project folder?  Now select the region and go to (local arrange menu) functions>show audio file in finder (the key command on my system is shift+command+R).  That is where the loop is.

  • To remove the cancelled Billin doc from VFX3

    Hi all,
    We have a cancelled billing doc in VFX3. This is because the accounting document is not generated for the same due to some foreign exchange value mismatch as the biiling doc was created in one month and cancelled in another month. So credit memo was created and released to accounting. But in VFX3 we can still find the cancelled billing doc which was not released to accounting.
    My question is how to remove the cancelled billing doc from VFX3. Please help me out and do the needful. Awaiting for the responses..........
    Regards,
    Pushkara

    Hi,
    When i changed the date also i'm getting the same error.
    Reversal of document 465v1 901005447v2 2010v3 not possible in FI
    Message no. F5A005
    Diagnosis
    Item &v4 in accounting document 465  901005447 2010
    was valuated with an open item foreign currency valuation.
    System Response
    Document cannot be reversed.
    I tried by changing the foreign exchange also. Still it didn't work.
    Please do the needful.
    Regards,
    Pushkara

  • Have tried it and want to remove it.....controls clicked wiil not clear it from the hard drive.. tell me how to remove it..

    sames as the question....tell me how to remove....thanks

    #close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.

Maybe you are looking for