How to remove "Select" header in a ADFMultiselection Table.

Hi All,
Can anyone help me in removing the "select" header in a ADF MultiSelection table.
I have searched the forum, but I didnot find a convincing answer.
Jst let me know if anyone has a solution for this.
Thanks,

Hi,
you can't change it in your code. I think the only option is to create a custom skin and then replace the resource bundle. Creating a custom skin for this is more work than the effect may justify. So to hide the string you can use CSS like the following
.x2z{color:#D2D8B0}
which turns the font color into the background color
Frank

Similar Messages

How to remove selected image from a light table?

According to the Aperture User Manual, when I select an image on a light table, I should be able to remove it (while still leaving it in the light table browser). However, this seems to work only for the image I most recently added to the light table -- when I select an image I added just before the most recent, the button at the upper left for "Light Table Put Back Selected" is grayed out. (Also, the command-shift-P shortcut shown in the tooltip doesn't do anything.) Am I misunderstanding the use of this button? Doing something wrong? I added some images, and decided I wanted to put a few of them back, but can't figure out a way to do that. Makes the light table pretty useless except for layout of a set of images you are already committed to. Doesn't seem possible.

Hey, thanks -- everything worked as you described. It never would have occurred to me that the "put back" button refers to the browser selection not the layout selection, for reasons I give below.
I think Aperture exhibits some conceptual confusion here. First of all, a "light table" is created by the New > Light Table command, and you add images to the newly created light table just as you would add them to an album. But those images don't go on the light table layout until you drag them from the browser to the layout table. The "put back" button and "remove from light table" contextual menu command both mean remove from the layout. The phrasing of the contextual menu command make it sounds as if it will remove the clicked image from the light table's collection of images, like removing an image from an album -- it would have made more sense to name this command "put back". Furthermore, the "put back" button is above the layout display, not above the browser, which to me implies that it applies to selections in the layout display. To select an image in the browser, and click "put back selected" seems backwards -- if you just selected the image in the browser, your attention is focused on the browser, not the layout; from the browser's point of view, the button should read "bring back" not "put back".
The documentation didn't really help when I was trying to figure this out. Sometimes the Aperture documentation refers to just a "light table", as on the overview on page 732. On pages 733 and 734, though, it refers to a "light table album". On page 735 of the Aperture manual there is a very brief explanation of how "to add images to the light table" and "to remove an image from the light table". Here, "light table" refers to the layout not the album. The explanation of the "Put Back Selected" button says to select an image then click the button, and the picture shown is of an image selected in the layout, not in the browser.

How to get selected row index of a Table ?

hi gurus,I'm new to Webdynpro for abap
I'm displaying just Flight details in a Table so
how to get selected row index of a Table and need to be display in Message manager.

Hi,
For getting the row index use the following code.
DATA lo_nd_node TYPE REF TO if_wd_context_node.
DATA lo_el_node TYPE REF TO if_wd_context_element.
DATA index TYPE i.
* navigate from <CONTEXT> to <NODE> via lead selection
lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_node ).
lo_el_node = lo_nd_node->get_lead_selection( ).
index = lo_el_node->get_index( ).
node is the name of the node which is binded to the table.
For printing the message u can use code wizard.
Press ctrl-F7. Now Select generate message.
IN this select the method REPORT_SUCCESS
In the code now u can give index to Message text Exporting parameter. Comment receiving parameter.
Write the whole code in onLeadSelect of the table.
Regards,
Pankaj Aggarwal

How to insert select columns from one internal table to another

Hi,
How to insert select columns from one internal table to another based on condition as we do from a standart table to internal table.
regards,
Sriram

Hi,
If your question is for copying data from 1 int table to other ;
we can use
APPEND LINES OF it_1 TO it_2.
or if they have different columns then:
loop at it_1 into wa_it1.
move wa_it1-data to wa_it2-d1.
apped wa_it2 to it_2.
clear wa_it2.
endloop.
thnxz

How to assign select-option values to internal table

hi all,
how to assign select-option values to internal table
thanks in advance.

Hi,
You just need to loop at your select-option field and take the values from low and high fields.
for. e.g
loop at s_werks .
move:s_werks-low to <your itab>
if not s_werks-high is initial .
move: s_werks-high to <youritab>
endif .
append <your itab>
endloop .
OR use select statement.
regards,
Omkar.
Message was edited by:
Omkaram Yanamala
Message was edited by:
Omkaram Yanamala

How to remove the approved order from the table in sapui5

Hi Experts,
how to remove the approved order from the table in sapui5.
After Approving the order how to remove the order from the table in sapui5.
Please help me.
Thanks & regards
chitti Babu

Hi,
Probelm is OBIEE on your machine.Some one might have deleted pdf option.
Refer : http://obiee101.blogspot.com/2009/07/obiee-dashboard-default-controls.html
Try to find out tag that is to be removed from controlmessages.xl so that you have only HTML.
Update :
Stop BI Server.Try removing below tag and restart server.
(sawm:if name="enablePDF">(a class="NQWMenuItem" name="pdf" href="javascript:void(null)" onclick="return PortalPrint('@{pdfURL}[javaScriptString]',@{bNewWindow});">
<sawm:messageRef name="kmsgDashboardPrintPDF"/></a)</sawm:if)
Regards,
Srikanth
Edited by: Srikanth Mandadi on Apr 19, 2011 3:36 AM

How to remove the header in Report from SQVI

Folks,
I created a report by joining 4 tables in SQVI, the output data is around 200 pages. I need to remove the header from the report so I can down load to a excel.
Can some tell me how to switch of the header in SQVI ( Layout Mode). I did this before using Legend on/off but I quite didn't remember how I exactly did it.
Thanks,
Kumar

Hi,
It is not about the thing that, whether your source is XML or flat file. If you dont want some thing in your source file , dont consider it and dont map it with your target structure. think that, your not getting the header in your source. What is the header here.
<Emp_details>
<Emp_Id> Employee No </Emp_Id>
<Emp_Name> Employee Name </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 1234 </Emp_Id>
<Emp_Name> xxxx </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 5678 </Emp_Id>
<Emp_Name> yyy </Emp_Name>
</Emp_details>
you have two fields under node Emp_details. What do u want to avoid here?
Regards,
Reyaz

How to remove the header tag in the XML data ?

Hi All,
I am sending an XML data from SFTP to Proxy, in that I want to remove the header tag (first tag) from the xml, while loading the data. how to do that ?

Hi,
It is not about the thing that, whether your source is XML or flat file. If you dont want some thing in your source file , dont consider it and dont map it with your target structure. think that, your not getting the header in your source. What is the header here.
<Emp_details>
<Emp_Id> Employee No </Emp_Id>
<Emp_Name> Employee Name </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 1234 </Emp_Id>
<Emp_Name> xxxx </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 5678 </Emp_Id>
<Emp_Name> yyy </Emp_Name>
</Emp_details>
you have two fields under node Emp_details. What do u want to avoid here?
Regards,
Reyaz

How to remove JTable header from JScrollPane?

Hi!
Does anyone know how to remove the JTable header from the JScrollPane the table is placed in? I tried calling
scrollpane.setColumnHeader( null ) and
scrollpane.setColumnHeaderView( null )
but none of the above worked...
Thanks!
Fil

Hi,
The easiest way to do this is to put an extra layer between the table and the scrollpane as follows:-
JPanel p = new JPanel(new BorderLayout());
// Add it to the north rather than center so that the table background color
// won't cover the empty part of the view port.
p.add(table, BorderLayout.NORTH);
JViewport v = tableScroll.getViewport();
v.setView(p);
where table is your JTable and tableScroll is your JScrollPane.
Hope this helps,
Ian

How to remove the header name in KM navigation iview

Hi,
I have an KM iview with linklistexplorer as layout.
It is displaying "Name" as header along with all the files.
I want to remove this header "Name" from the iview.
Can anyone help me on this.
Raghu

Hi Raghu,
The layoutset you are referring to is using the collection renderer LinkListCollectionRenderer. This defines the properties to be rendered for each resource, which in the standard are
"rnd:image,rnd:displayname(contentLink)"
Change this to
"rnd:image,rnd:displayname(contentLink/noTitle)".
See http://help.sap.com/saphelp_nw70/helpdata/en/79/a1d23e6b2c3d67e10000000a114084/frameset.htm for an overview over these modifiers.
Hope it helps
Detlev

How to remove highlighting in the CVI Table

Hi,
I have a table in which i will be selecting a row but i dont want to see the row highlighted in the table.
please let me know how to remove the highlighting but still i want the row to be selected.
thank you

Hello Haneef,
Here is some quick code that will prevent most events from putting the table into the Selection State and keep it in the Edit State:
int CVICALLBACK ChangeColor (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
switch (event)
case EVENT_GOT_FOCUS:
SetCtrlAttribute (PANEL, PANEL_TABLE, ATTR_TABLE_RUN_STATE, VAL_EDIT_STATE);
break;
case EVENT_LOST_FOCUS:
SetCtrlAttribute (PANEL, PANEL_TABLE, ATTR_TABLE_RUN_STATE, VAL_EDIT_STATE);
SetCtrlAttribute (PANEL, PANEL_TABLE, ATTR_DIMMED, 1);
SetCtrlAttribute (PANEL, PANEL_TABLE, ATTR_DIMMED, 0);
break;
case EVENT_ACTIVE_CELL_CHANGE:
SetCtrlAttribute (PANEL, PANEL_TABLE, ATTR_TABLE_RUN_STATE, VAL_EDIT_STATE);
break;
case EVENT_SELECTION_CHANGE:
SetCtrlAttribute (PANEL, PANEL_TABLE, ATTR_TABLE_RUN_STATE, VAL_EDIT_STATE);
break;
case EVENT_TABLE_ROW_COL_LABEL_CLICK:
SetCtrlAttribute (PANEL, PANEL_TABLE, ATTR_TABLE_RUN_STATE, VAL_EDIT_STATE);
break;
case EVENT_RIGHT_CLICK:
SetCtrlAttribute (PANEL, PANEL_TABLE, ATTR_TABLE_RUN_STATE, VAL_EDIT_STATE);
return 1;
break;
case EVENT_KEYPRESS:
SetCtrlAttribute (PANEL, PANEL_TABLE, ATTR_TABLE_RUN_STATE, VAL_EDIT_STATE);
break;
return 0;
As you can see, I am swallowing the EVENT_RIGHT_CLICK because it is the only event that will put table in the Selection State. Please let me know if this works.
Regards,
Jeff L.
Applications Engineer | National Instruments

How to get selected row values in a table using check box

Hi ADF Experts,
JDEV Version 11.1.1.7.0
My requirement is getting the selected row valuesof a af:table using a checkbox(multi select).
Thanks,
Animesh

Hi,
add a transient attribute to the POJO entity and update this through a check box. The ensure you have autosubmit=true set on the check box. In a value change listener set or remove the row's checbox attribute value
Frank

How do I select rows from the same table that have multiple occurances

Hi Everybody,
I am trying to select records from a detail table by grouping it. The table has more than 1 million records and the query is not performing well. The basic question is how to select a distinct record from a table which matches all values in one column and any in the other.
desc SCV
ID NUMBER PK (ID + SCRID)
SCRID NUMBER FK(SC)
ID SCRID
1 1
2 1
3 1
4 2
5 2
6 3
7 4
8 4
desc PROJECTS
ID NUMBER PK
NAME VARCHAR2(100)
ID NAME
1 PROJECT1
2 PROJECT2
3 PROJECT3
4 PROJECT4
desc PJS
ID NUMBER
PROID NUMBER FK (PROJECTS)
SCRID NUMBER FK (SCV(SCRID + SCVID)
SCVID NUMBER
ID PROID SCRID SCVID
1 1 1 1
2 1 1 2
3 1 2 5
4 1 3 6
5 1 4 7
6 2 1 3
7 2 2 4
8 2 2 5
9 2 4 7
There are over 1 million records in PJS.
desc TBP
SCRID NUMBER
SCVID NUMBER
SCRID SCVID
1 1
1 2
1 3
2 4
2 5
3 6
4 7
4 8
The requirement is to select projects that have matching SCRID, SCVID from TBP such that
all distinct SCRID should match and within that and any SCVID match will do. (A "AND" between each SCRID and an "OR" for each SCVID in that SCRID like 'SCRID = 1 AND (SCVID = 1 OR SCVID = 2 OR SCVID = 3) AND SCRID = 2 AND (SCVID =....)
So, for the sample data it should return us PROID = 1
I have few queries written for this:
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 1
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 2
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 3
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 4
This query performs well but the cost is very high, hardcoding, sorting.
The 2nd option is to:
SELECT pjs.PROID proid
FROM TBP tbp,
PJS pjs
WHERE pjs.SCVID = tbp.SCVID
AND pjs.SCRID = tbp.SCRID
GROUP BY pjs.PROID
HAVING COUNT(DISTINCT pjs.SCRID) = (SELECT COUNT(DISTINCT SCRID ) FROM TBP)
This has a low cost but runs slowly.
One more way I tried was with the IN operator like
SELECT DISTINCT PROID FROM PJS A,TBP T WHERE T.SCRID = 1 AND T.SCVID = A.SCVID
AND PROID IN (SELECT PROID FROM PJS A,TBP T WHERE T.SCRID = 2 AND T.SCVID = A.SCVID
AND PROID IN (...SO ON with each DISTINCT SCRID.
Again this involves too much of sorting.
Any help will be appriciated.
Thanks in advance.

Hi Andrew,
Use DELETE t_itab statement inside the loop.
I have modified your code. It is perfectly working.See bellow -
LOOP AT it_zmember01 INTO wa_zmember01.
WRITE: / wa_zmember01-mnumber UNDER 'NUMBER',
wa_zmember01-mname UNDER 'NAME',
wa_zmember01-mdob UNDER 'DOB'.
WRITE / '-----------------------------------------------------------------'.
DELETE it_zmember01. " Modified
ENDLOOP.
DELETE it_zmember01. statement inside the loop will delete the current row of the table.
Regards
Pinaki

How to remove the Personalize link from the table layout displayed on Page.

While i create a new page and a table layout is created on this page it displays a link called Personalize this table. For every table i create the same is displayed.
If 10 such table layouts are there i get personalize options on all such 10 layouts on same page.
If anyone of u knows @ this please help me out how to remove that link from the page.

You can set the value for the profile FND: Personalization Region Link Enabled / FND_PERSONALIZATION_REGION_LINK_ENABLED to No.
For additional information, please check the Personalization topic of the Oracle Application Framework Profile Options chapter in the OA Framework developer's guide.

How to get selection screen elements and its table reference of a report ?

halo experts
How can I get selection screen elements and its table reference of a report ? . I tried rs_refresh_from_select_options. But I am unable to get the table and field it is referring to
For eg if my selection screen 1000 is
parameters: p_carrid type spfli-carrid,
select-options :s-_connid type sflight-connid.
is there any Fm or method which gives me what are the screen elements( p_carrid and s_connid ) and what table( splfi and sflight ) and field ( carrid and conid )it is referring to ?

The following code is an example of how you might dynamically determine all your PARAMETERS and SELECT-OPTIONS variables at run time. The PARAMETERS and SELECT-OPTIONS only point to a dictionary element--not a specific table. Even though you may say "spfli-carrid" or "sflight-connid", the data type really references the dictionary type and not a specific table/structure.
REPORT ZTEST_PROG.
TABLES sflight.
DATA:
       screen_tab TYPE STANDARD TABLE OF screen,
       wa_screen TYPE screen,
       scrn_nm TYPE string,
       scrn_leftover TYPE string,
       l_type TYPE REF TO cl_abap_typedescr,
       typ_nm TYPE string,
       typ_pre TYPE string.
FIELD-SYMBOLS <fs_data> TYPE ANY.
PARAMETERS p_carrid TYPE spfli-carrid.
SELECT-OPTIONS s_connid FOR sflight-connid.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-group3 = 'PAR'
      OR screen-group3 = 'LOW'.
        APPEND screen TO screen_tab.
    ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT screen_tab INTO wa_screen.
    ASSIGN (wa_screen-name) TO <fs_data>.
    l_type = cl_abap_typedescr=>describe_by_data( <fs_data> ).
    IF wa_screen-group3 = 'LOW'.
      SPLIT wa_screen-name AT '-' INTO scrn_nm scrn_leftover.
      TRANSLATE scrn_nm TO UPPER CASE.
    ELSE.
      scrn_nm = wa_screen-name.
    ENDIF.
    SPLIT l_type->absolute_name AT '=' INTO typ_pre typ_nm.
    WRITE:
             / 'Screen Name: ', scrn_nm,
             / 'DDIC Type:    ', typ_nm.
ENDLOOP.
When you get into defining internal tables you can determine those at run time with cl_abap_structdescr. The following is an example of how you might do that. You can loop through the "components_table" and evaluate each field of the structure in this way.
DATA: structure_reference TYPE REF TO cl_abap_structdescr,
      components_table TYPE abap_compdescr_tab,
      components_structure LIKE LINE OF components_table.
structure_reference ?= cl_abap_structdescr=>describe_by_data( any_structure ).
components_table = structure_reference->components.
I don't know if this answers any of your questions but I hope that some of it is useful.

How to remove "Select" header in a ADFMultiselection Table.

Similar Messages

Maybe you are looking for