How to remove standard buttons on Custom Control?

Hi ABAPers,
How to remove the standard buttons that are appear on custom control and also how to remove the description of line column details.
Because in my requirement I have to create one custom infotype in which I have to add four custom controllers. In record creation it displaying that buttons and line description. So I want to remove those buttons and line descriptions.
Could you please give me the solution for this?
Thanks in advance,
Regards,
kishore

Hi Deepak,
    CALL METHOD G_EDITOR1->SET_TOOLBAR_MODE
      EXPORTING
        TOOLBAR_MODE           = 0
      EXCEPTIONS
        ERROR_CNTL_CALL_METHOD = 1
        INVALID_PARAMETER      = 2
        OTHERS                 = 3.
    IF SY-SUBRC <> 0.
             MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
Regards,
Kishore.

Similar Messages

How to remove the buttons in ALV GUI?

Hi All,
I am using the FM REUSE_ALV_GRID_DISPLAY for disaplying the ALV grid. i need how to remove these buttons ( mail word processing, loal file, Mail recipient, ABC analysis, Microsoft Execl and Graphics ) from the ALV Gui?
please give solution.
Regards,
Santha

hi,
IT_EXCLUDING TYPE SLIS_T_EXTAB OPTIONAL
you need to append the Fucntion codes to the it_exclude and then pass it to the parameter it_excluding.
append '&ABC' to it_excluding.
append '&BAC' to it_excluding.
call function 'REUSE_ALV_GRID_DISPLAY'
IT_EXCLUDING = it_exlcuding
Regards
Anver

How to remove clear button on message file upload bean item?

Dear Guru's.
How to remove clear button on message file upload bean item .
Regards,
Srinivas

Hi Raghu,
This is srinivas i am also facing this issue how u achieve this can u share me this is urgent for me .
Regards,
Srinivas

How to change standard PCA hierarchy for Controlling Area?

Dear all,
I'd like to change standard PCA hierarchy for Controlling Area. System doesn't allow me to do this with the following message:
=====================================
Standard hierarchy CIS for COAr 0700 already contains profit center(s)
Message no. KM160
Diagnosis
You wish to change the standard hierarchy of a controlling area, however, profit centers have already been assigned to the hierarchy. For this reason, you may not change the standard hierarchy for this controlling area.
=====================================
How can I change it?

I will clarify the business requirements behind this request.
We are currently implementing PCA for a customer. However, technically, PCA was already switched on several years ago and it was used for some not-really-accounting customer functionalities (Z* reports) .
So, currently the PCA hierarchy is total mess. No logical heirarchy, a lot of weird profit centers... Not posibly to use this for segment reporting at all. And I would like to sort this out for this project.
Is it possible to reorganize current standard hierarchy? Remove profit centers and profit center groups out of there? Forbid postings?

How to remove NO Button on dialog page

Hello friends,
i want to remove no button on my dalog page how to do? my code is below , below this code still i can see on dialog page no button.. can any one help me out..
OADialogPage dialogPage = new OADialogPage(OAException.WARNING,descMesg, null,"" ,"" );
dialogPage.setOkButtonLabel("ok");
dialogPage.setOkButtonItemName("YesButton");
dialogPage.setOkButtonToPost(true);
dialogPage.setPostToCallingPage(true);
System.out.println("Entering To Delete");
pageContext.redirectToDialogPage(dialogPage);
Thanks
krish.

You can specify your own button bar with the required buttons.
Extract from Developer's guide.
The setFooterNestedRegionCode and setFooterNestedRegionApplicationID methods in the OADialogPage class have been deprecated.
If you use the standard OK/NO buttons provided on the dialog page, you do not need to make any changes.
However, if you are using the OADialogPage.setFooterNestedRegionCode and OADialogPage.setFooterNestedRegionApplicationID methods to render customized buttons under the footer region, you must update your code to use the new method OADialogPage.setPageButtonBarRegionRefName instead. This new method lets you set a reference to a page button bar region, built declaratively with OA Extension. You can add any number of custom buttons to the page button bar region. OA Framework renders the page button bar region under the footer. Adding your custom content to a page button bar region allows the page buttons to be rendered and positioned in the proper places specified by the latest UI standards. To render the Return To navigation link under the footer, use the existing setReturnToLinkLabel and setReturnToLinkURL methods in OADialogPage.
To render a nested region, created with OA Extension, under a dialog page header, use the new OADialogPage.setHeaderNestedRegionRefName method.

How To Remove Standard CheckIn Form in CheckIn menu option list

Hi to all.
I need To Remove Standard CheckIn Form in CheckIn menu option list.
I want to use only my customized profiles.
Is there any doc or sample related.
Thanks in advance,
Soni

Unfortuantely, you must create your own custom component. I'm not going to explain how to do that since that requires a lot of typing, but if/when you decide to tackle that, you will need to include this in your resource file:
<@dynamichtml custom_finish_layout_init@>
<$include super.custom_finish_layout_init$>
navBuilder.deleteItem('MY_PERSONAL_CHECKINS_'+pneCheckinDocProfiles.length);
<@end@>
However, keep in mind this is what I use for my content server (10gR3 with CS10gR3CoreUpdate component, build 186). I have no idea what future patches may or may not have done with profile naming conventions or changes. I'm confident this will still work, but cannot be for certain.
Good luck.
PS. Please award points if deemed necessary

CRM Survey - How to remove Radio button defaults.

Hi experts,
I am trying to remove Radio button default. By default it is selected when I am trying to set attribute for answer options. Even if I unchecked, it reverts and set as selected again. Actually, I need remove Radio button default for the customer sees a response pre filled.
Please advise on how can I remove Radio button default for answer options.
Banu

Hi,
I see it now.
You need to change the config of your radio buttons in the transaction itself.
Goto CRM_SURVEY_SUITE, locate your survey, click on the change button ( a pencil) this will take you to the survey configuration.
There navigation to the section in the left hand pane that corresponds to the radio buttons. And you will see Yes and No for answers to the questions. Double click on each of them to display on the right side work area and change the property 'Selected' (which is a check box) to unchecked.
This should be easy.
Regards
Prasenjit

How to remove forward button from notification Page?

Hi All,
I would like to remove (disable ) forward button from Req approval work flow ? How can i achive this functionality ?
I will be appriciate for help.
Thanks
pat

Well, I'm guessing that you are using PO workflows, and using one of the standard lookups? Without having any details of what you are using, trying to second guess the answer is somewhat difficult.
If it's the case that you are talking about the PO workflows, then the buttons are standard functionality based on the lookup type that is used as the notification response. Trying to suppress this doesn't actually make much sense - you are sending someone a notification, asking them to take action, and then not giving them any ability to respond to the notification.
You would need to customize / personalize the notification page if you want to remove the buttons. The question then is - how will the process continue if you are removing the ability to respond to the notification?
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

How to remove calender button beside date prompt in infoview

Post Author: Durga
CA Forum: Desktop Intelligence Reporting
Hi ,
We have developed one deski report which will run through infoview.
while opening in the infoview in the beside the date prompt calender button is appearing.
But we dont need the calender button beside the date prompt.we want to select from LOV's only.
Please advice how to remove the calender button in infoview which is developed in Deski.
Regards,
Durga.

Changing the data of the date to char will get ride of the calendar control.

How to remove JTree +/- button?

I already have my own +/- icon(leafticon, openIcon, closeIcon) but JTree has default +/- button so it is become doube, so how to remove +/- JTree default button?
thx...

DarrylBurke wrote:
IMO the correct way to go about this is to substitute your custom icons for the default ones using UIManager. Don't forget to wrap the icon as a UIResource or it may not be recognized by some LaFs (may still not be recognized by some LaFs, but you increase your chances by using a UIResource ...)UIManager.put("Tree.expandedIcon", new IconUIResource(myCustomExpandedIcon));
UIManager.put("Tree.collapsedIcon", new IconUIResource(myCustomCollapsedIcon));dbyap it work. but i want to remove it, so i set to the non exist icon and it is gone. is it right or not?
ImageIcon icon = new ImageIcon("c:\\iconNonexist.png"); // actually the image is not there
UIManager.put("Tree.expandedIcon", new IconUIResource(icon)); // work the +/- is gone
UIManager.put("Tree.collapsedIcon", new IconUIResource(icon)); // work the +/- is gone
// UIManager.put("Tree.expandedIcon","none"); // not work

How to remove the buttons coming from report program?

Hi All,
I need to remove the buttons from an iview which is a sap transaction. when i execute the report program which uses a ldb (PCH) shows a selection screen having all the buttons.
We have created variants for this.Now i want to remove the buttons which are coming from the report program.how to do this ?
Lakshmi.

Goto sicf ->sap->bc->gui->sap->its->
open Webgui application
in the GUI Config enter the following parameters.
~noHeaderOkCode = 1
~webTransactionType = EWT.
All buttons can also be removed by ~webgui_simple_toolbar =0 ..
Also now open the trancsaction of the program form SE93 for which you want to hide
the Menu bar, in its properties select the EASY WEB TRANSACTION radio button.

How to remove the buttons which are coming from a report?

Hi All,
I need to remove the buttons from an iview which is a sap transaction. when i execute the report program which uses a ldb (PCH) shows a selection screen having all the buttons.
We have created variants for this.Now i want to remove the buttons which are coming from the report program.how to do this ?
Lakshmi.

Hi,
I think u r mentioning about the addition buttons that appear in the selection screen when using a logical database. for removing these buttons u can use a function module RS_SET_SELSCREEN_STATUS for setting ur own pf-status
do this in "at selection screen output" of the program..
in the tables parameter, u have the option for giving the ok-codes that u want to remove. append all the ok-codes into this table.
for getting the ok-codes u can use "tab" and go the button.. press F1. it will give the ok-code.
Regards,
Anoop

How to call standard form in custom form

sir,
please help me .in calling standard form through custom form
Edited by: user11996389 on May 15, 2012 10:00 PM

Hi,
As far as I understand, you have a standard form, S and a custom form, C. You want to call S from C.
The API mentioned in my previous reply is the standard way to call one form from another in Oracle Apps. You may invoke this API from a trigger like WHEN-BUTTON-PRESSED. The API has a few mandatory parameters which you need to provide in order to successfully call the form. As mentioned, please refer to the Developer's Guide.
If you have any doubts or face any problems/errors, post the details here. Forums members will be reluctant to help if you do not put in some efforts of your own.
Regards,
Sujoy

How to have push button in Table control

Hi Experts,
I have an internal table which I populate in table control. How can I have pushbutton in table control(in every row). If done how to have funtion code which will trigger PAI.
Thanks and regards.
Venkat

Hi,
I dont think that pushbuttons will be of much use as when you click a button same code will be executed all time.
So, you can take either selection column in table control (use the SELCOL in the table attributes)
or you can also take a checkbox in table control and then can perform action on lines which were selected by the user.
Hope this helps you out.
Regards,
Tarun

How to remove continue button from slide "Quiz Result"?

After clicking on the button gets the first slide. I want to remove the button. Help. I am a newbie. The settings are not found. Thank you

It's standards Captivate functionality that you cannot add Interactive Objects such as click boxes or buttons to the Quiz or Quiz Results slides.
If you're having issues with the Continue button NOT working on the Quiz Results slides, check your Quiz Settings as shown in my earlier post on this thread. It may be that you have the settings that make it mandatory for the user to pass the quiz before they'll be allowed to continue.
Check also in Quiz Settings in case the default Action for Pass or Failure is set to Continue. It might be set to No Action or something else that the Continue button cannot do for some reason.
If none of the above seems to be the case, remove the Quiz Results slide (by turning off Show Results in Quiz Settings) and then turn it on again the same way. If your project was upgraded from an earlier version of Captivate 3 or 4 it may be that the Quiz Results slide is currently defective. It's happened to me when upgrading older projects to Cp5 format. So re-generate the Quiz Results slide again and see if the Continue button now works better.
By the way, there's a button widget that ships with Captivate 5 which, because it's only a Static Widget and not an Interactive Widget, you CAN add it to the Quiz Results slide.

How to remove standard buttons on Custom Control?

Similar Messages

Maybe you are looking for