How to remove the default exit option on MIDP1.0 on Nokia devices?

My application Astral effects displays visuals. It can not use any commands, because they cause conflicts with the visuals. Events from soft keys are handled through the keypressed method instead. I have made one Nokia version and one version for all mobiles with MIDP2.0.
I have also made one version for all mobiles with MIDP1.0. It works on all brands except Nokia.
When a soft key is pressed on the Nokia devices, the keypressed method never gets called. Instead a default exit option gets activated. It leaves the user with only one option, to exit the application. So how do I remove this default exit option?

You must also take care of the fools that "convert" any other file (*.txt, *.xls, *.pdf, etc.) to tdms by simply changing the extension in explorer.
(There are a few people here that "convert" *.bmp to *.jpg this way because attachments of bitmaps are not allowed. Just because the browser is smart enough to still display it despite the incorrect extension does not make it a jpeg image. Others write to an ASCII formatted txt file but give it an *.xls extension. While this does not make it an excel file, it forces the file to be opened by excel, which does its best to make sense of it. Works most of the time ).
Clearly, you need to check for proper extension after selection, but you should also handle the errors properly if the file is name *.tdms, but actually is something else.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

How to remove the default value of "Inventory No." in Equipment Master

Hi Experts,
Need your advise
How to remove the default value for the field "Inventory No" in Equipment Master? It will goes back to the default value(TRANSIT) when i delete or change the value.
Thank You
Best Regards

i think you cannot default this value from configuration, check is there any screen variant exist for your transactions IE01/IE02, else may be any user exit is active on the equipment master transactions.
Take help of your ABAPer and verify the above.
Praveen.

How to remove the default members of a dimension from the control table?

Hi all,
I am new to hyperion FDM 11.1.1.2.0.0 .
When I navigate to Metadata>Control Tables and try to delete the default memmbers
for the dimension like category and period i got the following error.
Error: Period( 8/31/2009 ) is an active Global or Local Period and cannot be deleted.
Then again i unchecked active checkbox for that dimension from Hyperion Essbase Integration Setup of Workbench Client.
After doing that i got the following error
Error: Unable to retrieve target System Data.
Can anyone tell me how to remove the default members of a dimension from the control table?
Thanks

Create a new record for the table.
Go change the POV to the new record.
Return to the control table and delete the default record.

How to remove the default theme from "Revolution theme" to create our own movies and put our own background..

how to remove the default theme from 'Revolution theme" to create movies of our own and a background..
how to create chapter maker for movies...

Are you using iDVD? Or iMovie?
If iDVD, post in -> https://discussions.apple.com/community/ilife/idvd.
If iMovie, post in -> https://discussions.apple.com/community/ilife/imovie.
Good luck,
Clinton

How to remove the voice mail option

How can i remove the voice mail option in my iphone 4s . Whenever i tap that icon the carrier charges me ? pls help me ...................

Hi, I'm having the same problem. I need the email icon disabled or removed. It can be done via the UI but I'm running it on a Citrix server and need it to default to disable or best case gone.

How to remove the default message in PDF generated through JRC?

Hi all,
I am in need of removing the default and automatic message(Register free at .... to remove this message) at the pdf footer has been generated while exporting a report through a java Program using JRC.
By how it is generated and how to customize the pdf?
Can anyone help me.
Thanks in advance,
Saravanakumar.

It doesn't work for me neither.
Tried many ways.
I followed the full instructions putting the jar in eclipse/plugins folder, restart eclipse.
Right click on the project, chose crystal report -> update keycode.
I edited the CRConfig.xml adding keycode tag with the value I copied from the jar.
None of above works.
Is there other ways to remove that line of message from the report?
thank you in advance.
Sean

How to Remove the default Block for payment in MIRO

Hi,
In MIRO after posting the document message is coming,
"Document no. 5105600184 created (Blocked for payment)"
But our requirement is to remove the default "Block for payment"
What is the necessary setting to be done to remove it.
Thanks
Prasant

Hi
Thanks for your reply.
But in vendor master "Payment Transaction Accounting View"
I have selected the check box" free for payment".
still the message is coming in MIRO
Prasant

How to remove the default Title in Message box?

Hi all,
In the message box, there will be a default prefixed title(' Warning: JavaScript Window - ') displayed for all types of messages(Information, Question, Warning and Error). The window title that we specify in the parameter displays after this warning text.
It may mislead the user, on the type of message being shown.
I came to know that only way to eliminate the warning is to certify a PDF, and this requires signing the PDF with digital certificate and then have the recipient verify the certificate.
Reference : [Adobe Forum|http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=710]
Is there any other way to remove the default Warning message shown on the message box ?
Thanks,
Prabhakar.

Hi,
As Rick suggested dont instantiate the business object.
If you want any data's from the business object then create a same container in the Task and directly bind the container's
with the Business object.
For example if you are using the BUS2012 and you need the purchase order number in the decision step,
then create a new container for PO number in the Task.
Then directly bind the BUS2012.PurchaseOrder ---> PO number[Task container].
Thanks,
Vijay.

How to remove the standard Exit and Help buttons from the iviews

Hi All,
We migrated the ESS application from standalone ITS based on 4.6c to ECC 6 based Integrated one. After converting that into ICF service and when we created the iview for it in the portal(EP 7) It is showing two hyperlink items EXIT and HELP by default at the top of every iview. So, Can anybody tell me how to remove them from visibility.
And also, the iviews are not showing the table grids etc in the integrated environment. Is there any change that need to be done, for getting the table grids and all to look as it is in the previous envoronment.
Thanks & Regards,
Ravi

Hello Ravi,
You should be aware that many of the ESS transaction are not supported on the Integrated ITS, see note 870126 for more details.
To remove the "Exit" and "Help" you can use the ~webgui_simple_toolbar parameter, please see note 1010519.
Some tables have an option to show the gridlines or not. Please see if there is a table options icon in the upper right of the table to change the configuration. I'm not sure if what kind of table you're referring to so it may or may not be available.
Edgar

How to remove the 'all files' option on the file dialog

Hi I was wondering if anyone has a good way to tackle this problem.
In my application the user has the ability to load the contents of a tdms file into an xy graph. I am accomplishing this with a simple file control. I'd like to make sure that they can't load a file that is not a .tdms. I have used the pattern *.tdms on the properties for the control and the default view of the browse popup shows only .tdms files as I would expect but there is still an option for the user to change the file type to 'all files'
What I'd like to do is either remove the ability for the user to choose the 'all files' type. Failing that, I'll probably have to have my VI look at the file extension before loading the file to ensure that it is the right kind to avoid errors.
Are there any other options that I should look at for accomplishing this task?

You must also take care of the fools that "convert" any other file (*.txt, *.xls, *.pdf, etc.) to tdms by simply changing the extension in explorer.
(There are a few people here that "convert" *.bmp to *.jpg this way because attachments of bitmaps are not allowed. Just because the browser is smart enough to still display it despite the incorrect extension does not make it a jpeg image. Others write to an ASCII formatted txt file but give it an *.xls extension. While this does not make it an excel file, it forces the file to be opened by excel, which does its best to make sense of it. Works most of the time ).
Clearly, you need to check for proper extension after selection, but you should also handle the errors properly if the file is name *.tdms, but actually is something else.
LabVIEW Champion . Do more with less code and in less time .

How to remove the default audio that comes with the video story when a new video story?

am using adobe photo shop elements 13
trying to create a new video story by basically joining all home videos in a chapter. the annoying this is that the new project comes with a default audio clipping which basically makes my home video's audio inaudible.
how do i remove this default audio clip so i can hear my home video 's audio and not some random music..
thanks

Hi Hemanth,
Check this link,
Remove Refresh link from No Result View.
Thanks,
Vino

How to remove the default icons from the toolbar of modal dialog box screen

Hello Friends,
Iam calling a screen from function module using CALL SCREEN statement.
The screen is of type Modal Dialog Box. I created some input fields and buttons in the screen. When the screen is displayed, I can see the tool bar at the bottom along with the input fields and buttons in the screen.
These icons are Continue(Enter), Check, Cancel. How can I supress this??
I mean in my screeen I want only my input fields and buttons but not the default toolbar. How to do that?
Regards,
Raju

Hi Raju,
Try this...
First try to capture the F-codes of ur button apppearing on the dialog box and then exclude it from the PF-status by passing it to itab.
types: begin of tab_type,
        fcode like rsmpe-func,
       end of tab_type.
data: tab type standard table of tab_type with
               non-unique default key initial size 10,
      wa_tab type tab_type.
clear tab.
move 'DELE' to wa_tab-fcode.
append wa_tab to tab.
move 'PRIN' to wa_tab-fcode.
append wa_tab to tab.
set pf-status 'STA3' excluding tab.
Cheers,
Simha.
Reward all the helpful answers..

How to remove the default Digital ID in my mac Adobe Acrobat Pro 8.3.1?

Dear All,
I have my mac Adobe Acrobat Professional 8.3.1, I never used it to sign a document, and last week, after I opened up a document created from my lab's PC computer with Window 9 version of Acrobat Pro, the Digital ID with someone's name somehow has been encrypted in my Mac. The reason I said that the name has been encrupted in my Mac is because no matter how I do with the form, including getting a new form to start with, or removing the signature filed or getting the form with another PC to work with my Mac acrobat, when I go to the Sign form, the particular name and ID, which requires a password, has always been there. I called the Adobe to help, was told that since this is verison 8.3.1, I was advised to come here. Please help me with. Thank you.

Thanks George for the help, I managed to create my own ID using your
approach, Advanced > Security Settings > Digital IDs > add ID, but when I
signed it with the PDF of my signature, it is showed as my name in Typing
such as "XXX YY", instead of the handwritten form. I managed to use the
same PDF of my signature (signed and converted to PDF) last week when I
used the Pro 9, how can I attach my signature the same way in handwritten
form instead of being convered to "XXX YY" and appears "digitally signed"
Thanks again.

How to remove the ALV Statistics option from Accounts user's userids

Dear Sir/Madam,
In our Accounts department each time one extra page is comming out. When the ALV Statistics option is make Unchecked, then it funtioninng normally that is, single page is comming out.
Is there any way to make this option permanently Unchecked ? If possible please advice and also whether there will be any unwanted implications of it ?
Please advice.
Thanks and Regards,
Pranab

Option 1 - Use SAP Report RSPRIPARADMIN you can set this for all users
Option 2 - user parameter SP01_FROM 0000000002 - This means print job will start from page 2
Option 3 - List -> Print -> click to properties button in print window -> expend cover sheets -> double click on ALV statistics , now uncheck the ALV statistics check box . now click on setting button and click on copy setting button
Edited by: Savo on Jul 1, 2011 4:06 PM

How to set the default selected option as NO_OPTION in a JoptionPane

This is just an example program to create the same scenario in the project.When clicked on OK button, it will pop up a JOptionPane confirm dialog with YES-NO buttons.I want to set the default selected button as NO button. In the below program, the keyboard focus is set on NO button, but in the look and feel the selection is still YES button. Can anyone suggest a solution to make both the focus on NO button?
public class Test extends JPanel implements ActionListener{
     Test() {
          JButton btn = new JButton("OK");
          this.add(btn);
          btn.addActionListener(this);
     public void actionPerformed(ActionEvent e) {
          Object[] o = {"Yes", "No"};
          JOptionPane p = new JOptionPane("Are u sure?",JOptionPane.QUESTION_MESSAGE,JOptionPane.YES_OPTION,null,o,null);
          //p.setWantsInput(false);
          p.setInitialSelectionValue(o[1]);
          try {
               UIManager.setLookAndFeel(new MetalLookAndFeel());
          } catch (UnsupportedLookAndFeelException e1) {
               // TODO Auto-generated catch block
               e1.printStackTrace();
          //p.setFocusCycleRoot(false);
          p.setInitialValue(o[1]);
     //p.getRootPane().getDefaultButton().requestFocusInWindow();
          UIManager.put("Button.defaultButtonFollowsFocus", Boolean.FALSE);
          p.createDialog(this, "").setVisible(true);
          if(p.getValue() == o[0]) {
               System.out.println("yes");
          }else if(p.getValue() == o[1]) {
               System.out.println("no");
          //p.setWantsInput(true);
          //p.showConfirmDialog(this, "Are u sure?");
          //p.setInitialSelectionValue(new Integer(JOptionPane.NO_OPTION));
     public static void main(String[] args) {
          Test t = new Test();
          JFrame f = new JFrame();
          f.getContentPane().add(t);
          f.pack();
          f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          f.setSize(500, 500);
          f.setVisible(true);
     }

not sure what you're trying to do, but try this
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
class Test extends JPanel implements ActionListener
Test()
    JButton btn = new JButton("OK");
    this.add(btn);
    btn.addActionListener(this);
public void actionPerformed(ActionEvent e)
    Object[] o = {"Yes", "No"};
    int value = JOptionPane.showOptionDialog(null,"Are u sure?","",-1,-1,null,o,o[1]);
    if(value == 0) System.out.println("yes");
    else if(value == 1) System.out.println("no");
public static void main(String[] args)
    UIManager.put("Button.defaultButtonFollowsFocus", Boolean.TRUE);
    Test t = new Test();
    JFrame f = new JFrame();
    f.getContentPane().add(t);
    f.pack();
    f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    f.setSize(500, 500);
    f.setVisible(true);
}

How to remove the default exit option on MIDP1.0 on Nokia devices?

Similar Messages

Maybe you are looking for