How to remove trailing space at the end of a song.

This is related to this thread: Shorten song length (remove trailing bars) in Garageband 10.0.1
I have also done some Googling and have found some links related to selecting and exporting regions, which I have tried, but this is what I noticed.
It does not work when I select certain instruments, eg Synthesizer - Soundscape - Subtle Shiftscape or Synthesizer - Lead - Screamlead. I believe that what is happening is that those sounds tend to have some additional length to it. No matter where I cut my region, the additional length still get added. I don't have that problem if I don't select those instruments.
Anybody has any ideas?

Are you using GB 10.0.2 as well?
I am using both - GarageBand 10.0.2 and GarageBand '11.
And if I deselect all regions, File - Add Region to loop library is of course greyed out. Is it possible to save multiple tracks as a loop?
No.
Yep, I've deselected all regions. Still no luck.
My answer above was in answer to your "This time GB felt I only needed the first 4 measures of the song, even though I defined an entire Region over the length of the song and selected everything with Ctrl-A..."
You should be able to export the complete song, if you deselect all regions, and select all of the song using the cycle region with "Export Cycle region only" enabled, or with "Export Cycle region only" disabled, nothing selected, and the end-of-song marker correctly set.
However, this will not get rid of the trailing empty bars.
Reimport the bounced song to a new Ringtone project and trim it and save it as a tone, or to a regular project and add it to the Loop Library.
Find the AIFF file of the loop in the Loop library - it will be installed in your User Library in your Home folder
~/Library/Audio/Apple Loops/User Loops/SingleFiles/

Similar Messages

How do i remove extra space at the end of my song?

when i first started my song in GB i set it to 17 mins, now the song is only 2 mins How do I easily remove those extra minutes on my song so that I can export a smaller file?
Any help would be greatly appreciated.

zacharyfromlouisville wrote:
How do I easily remove those extra minutes on my song so that I can export a smaller file?
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)

Trailing Space at the end of Record

Hi,
I need a blank space at end of header record when transferring data to a file on application server.
Appreciate help.
Code:
wa_header-empty         = space.           " Length 4 type char
wa_header-rec_type     = 'ZREF'.           " Length 4 , constant
wa_header-partner_id   = '1234'             " Length 35 type char
wa_header-i_usr_id      = 'COMPANY'.   " Length 35 type char
wa_header-p_id_qualf   = space.            " Length 4 type char
TRANSFER wa_header TO g_out_file.
Desired output: enclosed in brackets.
[    ZREF1234                               COMPANY                                ]
The desired output has 28 trailing space after the text 'COMPANY'.

Hi,
Have you Tried the SHIFT hope it will solve out your problem,
or use Concatenate To insert Spaces to Right Side inside a loop.
Hi, Please Go Through the following Thread too hope will help you out.
[How to retain spaces in a string|Re: How to retain spaces in a string...really urgent]
Kind Regards,
Faisal
Edited by: Faisal Altaf on Feb 18, 2009 1:33 AM

How to remove blank spaces in the source code of my page?

I created a page with the following code for testing:
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/>
     <dsp:droplet name="ProductLookup">
          <dsp:param name="id" value="xprod2046" />
          <dsp:param name="elementName" value="product" />
          <dsp:oparam name="output">
               <dsp:valueof param="product.DisplayName"/>
          </dsp:oparam>
     </dsp:droplet>
</dsp:page>
It only shows the product name in the browser. But if I look at the source code of my page he created 61 lines in response to this code, where a line is the product name and the other 60 have nothing.
I know how to remove these lines that the ATG creates no content because my project is full of these empty lines.
Anyone ever had this problem and could help me?
Thanks

Hi ,
Yup this is a problem ,
you can use following ways :
1- use jsp comments eg :
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/><%--
     ----%><dsp:droplet name="ProductLookup"><%--
          ----%><dsp:param name="id" value="xprod2046" /><%--
          ----%><dsp:param name="elementName" value="product" /><%--
          ----%><dsp:oparam name="output"><%--
               ----%><dsp:valueof param="product.DisplayName"/><%--
          ----%></dsp:oparam><%--
     ----%></dsp:droplet><%--
----%></dsp:page>
2- End tags at next line :
e g :
* <dsp:page
* ><dsp:droplet name=”xyz”
* ><dsp:oparam name=”output”
* >Name: <dsp:valueof param=”abc”
* /></dsp:oparam
* ></dsp:droplet
* ></dsp:page>
3- Always use TAB instead of using SPACEBAR whie writing source code.
4 - From JSP 2.1 onwards we have a page directive trimwhitespaces ( see if that works , i was not able to ), google for it for more info
5 - You can modify your build scripts to remove white spaces from jsps while building EAR.(complex though, as you may not want to trim all white space.)
6 - modifying the deployment descriptor.
<init-param>
<param-name>trimSpaces</param-name>
<param-value>true</param-value>
</init-param>

How to remove trailing space-sqlldr failed OCI-30951-exceeds max length

sqlldr failed to load the xml into xdb ( table created through schema registration) because of the padded space in element 'Country' whose maximum length is defined as '3'…Is there any way to remove the extra trailing space using the control file or xdb annotation in the xsd? Thanks!
<Address>
<StreetAddress1>1 BRKSTONE SQ </StreetAddress1>
<StreetAddress2>SUITE 5 </StreetAddress2>
<City>ANDOVER </City>
<State>MA</State>
<Country>USA </Country>
<ZipCode>01810</ZipCode>
</Address>
Here is the errors I got:
kgepop: no error frame to pop to for error 30951
OCI-30951: Element or attribute at Xpath /BranchRegulatoryFiling/Branches/Branch[1]/Address/Country exceeds maximum length
Errors in file :
OCI-30951: Element or attribute at Xpath /BranchRegulatoryFiling/Branches/Branch[1]/Address/Country exceeds maximum length
----- Call Stack Trace -----
Bus Error (core dumped)
Here is my ctl file:
load data
infile *
into table xml_stg_tbl
append
reenable disabled_constraints exceptions cnstr_xcptn_tbl
xmltype(XMLDATA)(
lobfn filler char terminated by ',',
XMLDATA lobfile(lobfn) terminated by EOF
BEGINDATA
/tmp/1025552.xml
Edited by: user10954036 on Jul 27, 2009 8:12 AM

Hi,
Its good that u pasted the complete log file. In your environment you have to run this upgrade tool only once from any of the middle tier.
And with respect to your error that u got in precheck is quite simple. All u have to do is just run this script from by connecting to portal schema using sqlplus.
Run dropupg.sql
Location-------- /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/dropupg.sql
Later you re-run the upgrade tool and let me know the status.
Good luck
Tanmai

How to transfer trailing spaces in the source field type c

Hello,
I have to splitt a string key of 120 characters into two InfoObjects (CHAR). The problem is, that the trailing spaces are lost in the character Field.
Has anybody an idea to avoid the lost?
Thank you.
Conversion Table for Source Field Type c
The characters in the source field are inserted in the target field, left-aligned. Trailing spaces in the source field are not transferred. If the target field is longer than the number of characters transferred, it is filled with blank characters to the right. If the target field is shorter, the number is truncated from the right.

Hi ,
Create two Characteristic InfoObjects in BW With length 60 Char and then in the Transfer Rules of this two InfoObjects write the Formula using Left() and right() function present in the Formula Builder .
That is First infoObject Contains the Left 60 Char and next one Contains the right 60 Char.
Regards,
Vijay.

I am using logic pro x and do not know how to fade a track at the end of a song or change the volume in a portion of the track.

I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.

Hi
rmarlia wrote:
I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.
Armadillosound wrote:
To create a fade out press T to open the tool menu and select the fade tool.
Completely inappropriate, and they all also not help with volume adjustments. Fades will only apply to Audio Regions in the Tracks area: they will not fade out the complete mix unless you first Bounce it, add that to the Tracks area, apply the Fades with the Fade tool, then Bounce in Place (Again).
Much much better to make use of Track automation to take care of Volume adjustments, and to Fade out the end of the song by applying Track Automation to the Output Channel
https://help.apple.com/logicpro/mac/10/#lgcpb1a1ea03
CCT

How to remove blank lines in the end of list .

hi,
in a complex report ,when there are only 20 pages,and linecount is 65(2) ,in the last page only 27 lines are filled and data is completed.then blank lines are printing from 27th line to 63 line.then end of page is triggering.
so plz help me how to remove the blank lines here and immediately print the endof page.

Hi,
will this work for you.
SET BLANK LINES OFF.
These statements allow you to specify whether you want to output blank lines or not. Use SET BLANK LINES ON to output blank lines or SET BLANK LINES OFF to suppress them.
Regards
Viswanath Babu

How to Remove Blank spaces in the text elements for a smartform

Hi All,
Can any one please help me out to remove the blank spaces in the text elements.
We are printing Labels using the Zebra Printer and we have rotated the windows to 90 degrees.
We are able to see out text and barcodes. But the issues is when we are printing the label. We are getting spaces in the Text and in the Text elements fields. I have tried to give &g_name(C)&. But it is not working even i worked with style sheet spaces no luck.
Currently out text and fields are printing like this
s h r i y a n
material number
1111 -001 -000
They should print like
shriyan
1111-001-000
According to the ZEBRA suggestions we are using the font helve.
Plase help us it is very urgent.
Reward point will be given.
Thanks

Hi,
Just use Condense g_name inside the program lines.
Just to see how it behaves put a hard breakpoint.
Break Username. and check the condense statement.
condense <your field> no-gaps.
Create program lines ahead of printing. give the field you want to condense in the input and output parameters of the program lines.
Use condense inside the program lines.
Thanks,
Vamshi.

PI removing blank spaces at the end of the lines in a plain text file

Hi -
I have an interface that transfers a file via FTP. I defined both the sender and receiver to transfer either Text or Binary but the interface removes every blank space I have after the last character. The file is a fixed lenght file.
Example:
Original file:
Hello world(space)(space)(space)(space)(space)(space)(space)(space)(eol)
where (space) is the space character and (eol) is the end of line char.
File after it is received.
Hello world(eol)
I already defined the parameter Row.fieldFixedLenghts with 10164 which is the lenght of the lines of the file.
Any ideas why it may be happening?
Thanks,
Carlos.

Hi -
I tried both the parameters:
xml.fieldContentFormatting
structure.fieldContentFormatting
The received file still has the problem. All the blank spaces are cleared out.
The file is a plain text file not an XML file. May this be the issue?
Thanks,
Carlos.

How to remove trailing spaces in SQL PLUS spool

Hi,
I've requirement to pull data from tables and I'm using sqlplus spool to automate data fetch from various tables:
I'm using the following script for the same :
set echo off
set feedback off
set pagesize 0
set linesize 2000
set heading on
set trimspool on
Spool table1.TXT;
prompt col1|col2|col3|col4|col5
select
LTRIM(RTRIM(col1))||'|'||
LTRIM(RTRIM(col2)) ||'|'||
LTRIM(RTRIM(col3)) ||'|'||
LTRIM(RTRIM(col4)) ||'|'||
LTRIM(RTRIM(col5)) ||'|'||
from TABLE1 ;
spool off
After using trimspool on option also I'm having trailing spaces issue how to fix it?
Thanks,
Mahender.
Edited by: user518071 on Oct 11, 2010 1:05 PM

Hi,
do you need LTRIM/RTRIM? This is namely your problem. By using a function around your column Oracle reserves the maximum lenght for the column. So what do you get without those functions? Furthermore you are concatenating all the columns. This is also a function. For getting '|' in between columns you can also set a seperator by using
set colsep '|'Herald ten Dam
http://htendam.wordpress.com

How to remove HTML comments at the end of the portal page

Hi,
I've noticed that even if you turn off performance comments, some code in the portal UI still sticks this:

at the bottom of every page.
Does anyone know how I can suppress these comments?
Thanks,
Chris Bucchere | bdg | [email protected] | www.bdg-online.com

Are you using GB 10.0.2 as well?
I am using both - GarageBand 10.0.2 and GarageBand '11.
And if I deselect all regions, File - Add Region to loop library is of course greyed out. Is it possible to save multiple tracks as a loop?
No.
Yep, I've deselected all regions. Still no luck.
My answer above was in answer to your "This time GB felt I only needed the first 4 measures of the song, even though I defined an entire Region over the length of the song and selected everything with Ctrl-A..."
You should be able to export the complete song, if you deselect all regions, and select all of the song using the cycle region with "Export Cycle region only" enabled, or with "Export Cycle region only" disabled, nothing selected, and the end-of-song marker correctly set.
However, this will not get rid of the trailing empty bars.
Reimport the bounced song to a new Ringtone project and trim it and save it as a tone, or to a regular project and add it to the Loop Library.
Find the AIFF file of the loop in the Loop library - it will be installed in your User Library in your Home folder
~/Library/Audio/Apple Loops/User Loops/SingleFiles/

Export to text removes trailing spaces in XI R2

I've found an article that talks about the problem of the export to text removing trailing spaces, but the article mentions that this is fixed in Crystal Reports XI with a newer version of u2ftext.dll to version 11.0.0.941.
[1218375 - Trailing spaces ignored when exporting to Text format|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333333373335%7D.do]
I'm using Crystal Reports XI R2 and my u2ftext.dll version is already 11.5.11.1470.
I'm I missing something or is there another solution to the issue in XI R2?
Thanks,
Jeff

2 Years, multiple people are asking this question.......Does anyone in support have a response for keeping the trailing spaces intact during export?

How to add spaces at the end of record

Hi Friends,
i am creating a file which contains more than 100 records.
In ABAP i have internal table with on field(135) type c.
some time record have length 120, somtime 130 its vary on each record.
but i would like to add space at the end of each record till 135 length.
Can you please help me how to add speace at the end of record.
regards
Malik

So why did you said that in your first posting? My glass sphere is out for cleaning...
Instead of type c use strings and add spaces until they have the appropriate length.
loop at outtab assigning <pout>.
while strlen( <pout>-val ) < 135.
concatenate <pout>-val `` into <pout>-val.
endwhile.
endloop.

How to remove save, cancel option when end user runs the workbook in Portal

Hi,
how to remove save, cancel option when end user runs the workbook and make some small changes like using page items or increasing rows and columns
I already made 2 changes
1) I removed the option in Oracle Enterprise Manager under discoverer viewer of saving
2) I also removed the option of Allow saving changes made in Viewer when adding workbook to portal
But still the end user gets options of saving when made small changes to workbook like increasing rows and columns
Is their any place, I need to make changes?
Thanks in Advance
Rowdheer

Don't use JSP to serve a binary file. It almost implies the use of awful scriptlets and the invocation of both the response writer and the response outputstream which would only lead to IllegalStateException headaches in the server logs.
Use a Servlet instead. Specify the file name as request parameter and let the servlet read the file and write it to the outputstream of the response.

How to remove trailing space at the end of a song.

Similar Messages

Maybe you are looking for