How to transfer trailing spaces in the source field type c

Hello,
I have to splitt a string key of 120 characters into two InfoObjects (CHAR). The problem is, that the trailing spaces are lost in the character Field.
Has anybody an idea to avoid the lost?
Thank you.
Conversion Table for Source Field Type c
The characters in the source field are inserted in the target field, left-aligned. Trailing spaces in the source field are not transferred. If the target field is longer than the number of characters transferred, it is filled with blank characters to the right. If the target field is shorter, the number is truncated from the right.

Hi ,
Create two Characteristic InfoObjects in BW With length 60 Char and then in the Transfer Rules of this two InfoObjects write the Formula using Left() and right() function present in the Formula Builder .
That is First infoObject Contains the Left 60 Char and next one Contains the right 60 Char.
Regards,
Vijay.

Similar Messages

How to remove blank spaces in the source code of my page?

I created a page with the following code for testing:
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/>
     <dsp:droplet name="ProductLookup">
          <dsp:param name="id" value="xprod2046" />
          <dsp:param name="elementName" value="product" />
          <dsp:oparam name="output">
               <dsp:valueof param="product.DisplayName"/>
          </dsp:oparam>
     </dsp:droplet>
</dsp:page>
It only shows the product name in the browser. But if I look at the source code of my page he created 61 lines in response to this code, where a line is the product name and the other 60 have nothing.
I know how to remove these lines that the ATG creates no content because my project is full of these empty lines.
Anyone ever had this problem and could help me?
Thanks

Hi ,
Yup this is a problem ,
you can use following ways :
1- use jsp comments eg :
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/><%--
     ----%><dsp:droplet name="ProductLookup"><%--
          ----%><dsp:param name="id" value="xprod2046" /><%--
          ----%><dsp:param name="elementName" value="product" /><%--
          ----%><dsp:oparam name="output"><%--
               ----%><dsp:valueof param="product.DisplayName"/><%--
          ----%></dsp:oparam><%--
     ----%></dsp:droplet><%--
----%></dsp:page>
2- End tags at next line :
e g :
* <dsp:page
* ><dsp:droplet name=”xyz”
* ><dsp:oparam name=”output”
* >Name: <dsp:valueof param=”abc”
* /></dsp:oparam
* ></dsp:droplet
* ></dsp:page>
3- Always use TAB instead of using SPACEBAR whie writing source code.
4 - From JSP 2.1 onwards we have a page directive trimwhitespaces ( see if that works , i was not able to ), google for it for more info
5 - You can modify your build scripts to remove white spaces from jsps while building EAR.(complex though, as you may not want to trim all white space.)
6 - modifying the deployment descriptor.
<init-param>
<param-name>trimSpaces</param-name>
<param-value>true</param-value>
</init-param>

How to remove trailing space at the end of a song.

This is related to this thread: Shorten song length (remove trailing bars) in Garageband 10.0.1
I have also done some Googling and have found some links related to selecting and exporting regions, which I have tried, but this is what I noticed.
It does not work when I select certain instruments, eg Synthesizer - Soundscape - Subtle Shiftscape or Synthesizer - Lead - Screamlead. I believe that what is happening is that those sounds tend to have some additional length to it. No matter where I cut my region, the additional length still get added. I don't have that problem if I don't select those instruments.
Anybody has any ideas?

Are you using GB 10.0.2 as well?
I am using both - GarageBand 10.0.2 and GarageBand '11.
And if I deselect all regions, File - Add Region to loop library is of course greyed out. Is it possible to save multiple tracks as a loop?
No.
Yep, I've deselected all regions. Still no luck.
My answer above was in answer to your "This time GB felt I only needed the first 4 measures of the song, even though I defined an entire Region over the length of the song and selected everything with Ctrl-A..."
You should be able to export the complete song, if you deselect all regions, and select all of the song using the cycle region with "Export Cycle region only" enabled, or with "Export Cycle region only" disabled, nothing selected, and the end-of-song marker correctly set.
However, this will not get rid of the trailing empty bars.
Reimport the bounced song to a new Ringtone project and trim it and save it as a tone, or to a regular project and add it to the Loop Library.
Find the AIFF file of the loop in the Loop library - it will be installed in your User Library in your Home folder
~/Library/Audio/Apple Loops/User Loops/SingleFiles/

Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.

Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.?

I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!!

Trailing Space at the end of Record

Hi,
I need a blank space at end of header record when transferring data to a file on application server.
Appreciate help.
Code:
wa_header-empty         = space.           " Length 4 type char
wa_header-rec_type     = 'ZREF'.           " Length 4 , constant
wa_header-partner_id   = '1234'             " Length 35 type char
wa_header-i_usr_id      = 'COMPANY'.   " Length 35 type char
wa_header-p_id_qualf   = space.            " Length 4 type char
TRANSFER wa_header TO g_out_file.
Desired output: enclosed in brackets.
[    ZREF1234                               COMPANY                                ]
The desired output has 28 trailing space after the text 'COMPANY'.

Hi,
Have you Tried the SHIFT hope it will solve out your problem,
or use Concatenate To insert Spaces to Right Side inside a loop.
Hi, Please Go Through the following Thread too hope will help you out.
[How to retain spaces in a string|Re: How to retain spaces in a string...really urgent]
Kind Regards,
Faisal
Edited by: Faisal Altaf on Feb 18, 2009 1:33 AM

How to set white spaces between the fields in dataset??

Hi all,
I am writing a set on information to from infotypes to a text file. Its a fixed width file. How do set white spaces in the fields for dataset?
Example:
TYPES: begin of header,
                filler(40) type c,
                id(3)        type c,
                filler2(7) type c,
                delimiter type c,
             end of header.
DATA header type header.
header-filler1 = ' '.
header-id       = '100'.
header-filler2 = ' '.
header-delimiter = cl_abap_char_utilities=>newline.   ( do it to get a new line)
my_table = header.
append my_table.
DATA: out_file(256) type C,
      codepage_ref type ref to CX_SY_CONVERSION_CODEPAGE,
      out_char type c,
      size type i,
      insert_string type string,
      insert_size type i.
out_file = filename.
open dataset out_file for output in text mode ENCODING NON-UNICODE.
LOOP AT my_table.
    size = strlen( my_table ).
    insert_string = ''.
    DO size TIMES.
      offset = sy-index - 1.
      try.
          out_char = my_table+offset(1).
          IF out_char = SPACE.
            CONCATENATE insert_string '' INTO insert_string SEPARATED BY SPACE.
          ELSE.
            CONCATENATE insert_string out_char INTO insert_string.
            transfer insert_string to out_file NO END OF LINE .
            insert_string = ''.
          ENDIF.
        catch CX_SY_CONVERSION_CODEPAGE.
          insert_size = strlen( insert_string ) - 1.
          insert_string = insert_string(insert_size).
      endtry.
    ENDDO.
   transfer CL_ABAP_CHAR_UTILITIES=>NEWLINE TO out_file NO END OF LINE.
ENDLOOP.
close dataset out_file.
How do I get to insert the space for filler1 and filler2?
Edited by: Siong Chao on Oct 4, 2011 4:56 AM
Edited by: Siong Chao on Oct 4, 2011 8:27 AM
Edited by: Siong Chao on Oct 4, 2011 8:29 AM

problem lies in the open dataset codes
Used:
open dataset out_file for output in text mode encoding non-unicode message msg.
if sy-subrc= 0.
loop at my_table.
transfer my_table to out_file
transfer cl_abap_char_utilities=>newline to out_file no end of line.
endloop.

Bootcamp: How to transfer more memory to the windows side? i'm running low

Wondering if you anyone knows how to transfer more memory to the windows side (partition) without having to uninstall bootcamp and start over...... I am running low on memory on the windows side but don't have either of the software disks to start over.

Too many people don't allocate enough storage space (memory = RAM) and make the partition too small.
Only things you can do is backup both OS X and Windows, remove the BootCamp Partition, reformat the full drive, and restore.
WinClone will help you with Windows. http://www.twocanoes.com
SuperDuper or TimeMachine or Disk Utility Restore with OS X.

How to search a term in the source code

Hello ,
How to search a term in the source code. I have selection screen , on which a program name will be given and term to search. How can I proceed to know whether this term is available in the source code of the program
Thanks and regards,
Satya

Hi naga,
1. one option is to retrive the source code of the requried program,
into internal table using the syntax READ REPORT (just see f1 help on it)
READ REPORT prog INTO itab [MAXIMUM WIDTH INTO wid].
2. Then we can loop / search the internal table for the required term.
regards,
amit m.

How to transfer own -done with the iPad- movies from iPad to PC ?

How to transfer own -done with the iPad- movies from iPad to PC ?
The fotos are possible to transfer, but not the movies

Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

How to transfer my contact to the laptop

how to transfer my contact to the laptop

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
You should be syncing contacts to your computer regularly.

How to remove trailing space-sqlldr failed OCI-30951-exceeds max length

sqlldr failed to load the xml into xdb ( table created through schema registration) because of the padded space in element 'Country' whose maximum length is defined as '3'…Is there any way to remove the extra trailing space using the control file or xdb annotation in the xsd? Thanks!
<Address>
<StreetAddress1>1 BRKSTONE SQ </StreetAddress1>
<StreetAddress2>SUITE 5 </StreetAddress2>
<City>ANDOVER </City>
<State>MA</State>
<Country>USA </Country>
<ZipCode>01810</ZipCode>
</Address>
Here is the errors I got:
kgepop: no error frame to pop to for error 30951
OCI-30951: Element or attribute at Xpath /BranchRegulatoryFiling/Branches/Branch[1]/Address/Country exceeds maximum length
Errors in file :
OCI-30951: Element or attribute at Xpath /BranchRegulatoryFiling/Branches/Branch[1]/Address/Country exceeds maximum length
----- Call Stack Trace -----
Bus Error (core dumped)
Here is my ctl file:
load data
infile *
into table xml_stg_tbl
append
reenable disabled_constraints exceptions cnstr_xcptn_tbl
xmltype(XMLDATA)(
lobfn filler char terminated by ',',
XMLDATA lobfile(lobfn) terminated by EOF
BEGINDATA
/tmp/1025552.xml
Edited by: user10954036 on Jul 27, 2009 8:12 AM

Hi,
Its good that u pasted the complete log file. In your environment you have to run this upgrade tool only once from any of the middle tier.
And with respect to your error that u got in precheck is quite simple. All u have to do is just run this script from by connecting to portal schema using sqlplus.
Run dropupg.sql
Location-------- /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/dropupg.sql
Later you re-run the upgrade tool and let me know the status.
Good luck
Tanmai

HT201364 How can I reduce space on the startup disc to enable the download of Mavericks?

How can I reduce space on the startup disc to enable the download of Mavericks? I have enough overall disc space but the update won't download and tells me to reduce "startup" disc space.

I have enough overall disc space but the update won't download and tells me to reduce "startup" disc space.
How much free space do you have?
This warning usually indicates, that your free disk space is critically low.
Empty you Trash, delete files that you do not need at all, and move large media files, like iPhoto libraries or videos to an external drive.

How do you free space on the startup disk

how do you free space on the startup disk

If your disk is 80% full that is normal. Time Machine uses up to 80% of the disk space for local snapshots. To get rid of these snapshots simply plug in your Time Machine backup drive and run a backup.
If you have less than 20% disk space then it is time to roll up your sleeves and search for what you can delete and what you can offload to another disk.
If you have less than 10 GB you definitely need to delete or offload some files. You may want to maintain at least 20 GB of free space so when your disk starts filling again it will have some room before it hits that 10 GB mark again. More headroom is better. If you let the space fall much below 9 GB you might not be able to boot your machine.
Initial easy steps to gain disk space:
- Delete all files in the Downloads folder.
- Empty the trash.
- Start iPhoto, empty its trash and restart the computer.
Deleting files:
Run a Time Machine (or other) backup since you are about to delete and move files and you may need to recover from any inadvertent mistakes or decisions. You will need one external hard drive for your Time Machine (or other) backup and a second one onto which you will offload some files.
Then use the free application OmniDiskSweeper http://www.omnigroup.com/more to explore your volume in descending order by size so you can attack the problem from the top down, deleting the largest unwanted files first. Delete with caution and do not delete any system files. Remember to empty the trash after trashing the files.
Moving files:
Consider moving some of the no-often-used large files or directories to an external disk. Use ODS again to find them.
As noted above this will be at least your second hard drive. Your first one(s) is/are for your Time Machine (or other) backup(s). Do not offload files onto a Time Machine disk.
Format the second drive as Mac OS Extended (journaled). Using OWS to find large files/folders and copy them from the system drive to the external hard drive and delete them from your internal drive.
Then  > System Preferences > Time Machine > Options… > Remove the offload HD name from the exclusions list.
Now both your system disk and your external offload disk will be backed up onto your Time Machine disk.
For more about backups:
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
From: http://www.thexlab.com/faqs/freeingspace.html
To move your iTunes Music folder to another disk or partition:
To change the location of your iTunes Music folder, carefully follow the instructions in the AppleCare® Knowledge Base document "iTunes for Mac: Moving your iTunes Music folder."Additional information can be found in iTunes Help.
http://webcache.googleusercontent.com/search?q=cache:http://www.thexlab.com/105/ 00000849.html
Laptop users may want to consider having two iTunes libraries: a small library of current favorites on their computer, while their complete library resides on an external hard drive. Utilities like iTunes Library Manager enable you to easily have multiple iTunes libraries you can use with your account. https://www.macupdate.com/app/mac/7689/itunes-library-manager
To move your iPhoto Library folder to another disk or partition:
To move the iPhoto Library folder to a new location, employ the instructions in the AppleCare Knowledge Base document from http://support.apple.com/kb/PH2506 corresponding to the version of iPhoto you are using. Additional information can be found in iPhoto Help.
Laptop users may want to consider having two iPhoto libraries: a small library of current, favorite photographs on their computer, while their complete library, or archives of older photos are saved on an external hard drive. Utilities such as iPhoto Buddy and iPhoto Library Managerenable you to have multiple iPhoto libraries that you can use with your account.
https://www.macupdate.com/app/mac/12175/iphoto-buddy
https://www.macupdate.com/app/mac/7158/iphoto-library-manager

How to identify the source field you jumped off in rri-exit

Hello Forum,
I need your expertise regarding the following problem:
We want to fill target fields in the RRI-Exit depending on the source field you called a report.
When we jump from report 1 to report 2 in BEx Analyzer, we'll get the mdflag in the i_thx_sender table.
Is there any way to get the same information by calling rri in web? Or is there any workaround to get the information from which field the rri started?
Many thanks in advance for any idea.
Kind regards,
Tobias

Hi,
One simple way is goto CMOD and give project names with Z* or Y*. First findout the naming convensions following in your project and see.
Then gibe projects one by one and select COMPONENTS option and click on Display, if you find the following Function Exits means it is our DataSource project
EXIT_SAPLRSAP_001
EXIT_SAPLRSAP_002
EXIT_SAPLRSAP_003
EXIT_SAPLRSAP_004
Thanks
Reddy

How to Change the Value Field Type of a Value Field

Hi,
How can I change the value field type from Currency to Quantity of a value field? I have tried to do it in KEA6. I can change the value field and its description, but not the value field type from currency to qty. If I change this config, is there any other changes that I need to make so there is no side issue of this change?

Hi Prem,
Once you created value field as quantity or currency, you can not change this nature of value field. Based on this, system creates lots of data and tables. For this reason system will not allow any changes in quantity or currency.
Alternative way is to remove the old value field and create a new value field assign to operating concern and put all your seetings.
Please let me know if you require any clarifications.
Thank you,
Regards,
Santosh
Reward points if helpful.

How to transfer trailing spaces in the source field type c

Similar Messages

Maybe you are looking for