How to remove trailing zeros from a fraction part.

How to remove trailing zeros from fraction part, need standard API rather then some java code.

user8726363 wrote:
How to remove trailing zeros from fraction part, need standard API rather then some java code.I'm pretty sure we have all gathered that English is not your first language, but your question is not a good question in any language.
Back up. Take a deep breath.
Now - what's your problem ?
Please illustrate with results, and the code (just the class/method; not your entire application) that is causing them.
Winston

Similar Messages

How to remove trailing zeros from a decimal (type) value?

Hi Everyone,
I would like to 'drop' some trailing zeros from a decimal value, e.g.: 50.000000, and I am wondering how to go about this?
The value is definitely of decimal type, and in this instance I know that I want to eliminate exactly six (6) zeros.
Any help here will be greatly appreciated.
Kind Regards,
David

Try the below:
This is sort of a display issue, you may do it at Application side, which would be efficient.
Declare @s Decimal(10,6)='50.0000000'
Select Cast(@s as decimal(10,0))

How to remove leading zero from Material Number

Hello Everyone,
I need to figure it out how to remove leading zero from material number. Cureently extractor is sending material number as 100663. But when comes into BI i am getting as "000000000000100663" and similariy in report it is appearing as "000000000000100663". Now my client wants me to exclude preceeding zero for a material in all the reports.
Is there any setting in query desinger to handle this issure or in the backend.
Need your inputs.
Thanks,
Lasya.

Hi
you can use the function Module
CONVERSION_EXIT_ALPHA_OUTPUT in the start routine
to test this go to SE37 --- give the CONVERSION_EXIT_ALPHA_OUTPUT -
>display -
> F8
in the input give 000000456
and execute
the out put will be 456
for getting Zeros you can use
CONVERSION_EXIT_ALPHA_INPUT--- to remove leading zeros
Santosh
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:52 PM
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:54 PM

How to remove leading zeros from variable

hi,
 how to remove leading zeros from variable like it_vbap-matnr.
value in it_vbap-matnr is 000000000000000358
i want to remove leading zeros so that it become 358
regards
deepak

You can use Function Module 'CONVERSION_EXIT_MATN1_OUTPUT'
This Function Module will eliminate leading Zeros.
For each MATNR Value read form DB Table,u can eliminate Leading zeros and then modify ur Internal table.
I think u will not get leading Zeros into utr Internal table when u read from VBAP.
Bcoz MATNR in VBAP itself have Conversion routine.
If u r getting leading zeros,U can use following Logic.
tables:
vbap.
data:
 t_vbap like standard table of vbap.
select matnr
from vbap
into corresponding fields of table t_vbap.
loop at t_vbap into vbap.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_OUTPUT'
 EXPORTING
 INPUT = vbap-matnr
 IMPORTING
 OUTPUT = vbap-matnr
modify t_vbap from vbap transporting matnr.
endloop.
Hope this will work.....

How to delete trailing zeros from a quantity field to display in ALV?

Hi there,
i am retrieving the field LGMNG from LIPS table, which is of type QUAN(13). All LGMNG values there are stored as
1,000
20,000
50,000 etc.
But i want my values to be displayed as
1
20
50 etc.
i have tried the " shift v_variable right deleting trailing '0'" but it does not work.
also, if the value of LIPS_LGMNG = 0,000, i need those columns in ALV empty(that is no zeros or comma displayed)
can anyone please help?
Thanks a lot,
Mee

hi,
use this it will solve your problem, just write down this on your Fieldcatalog.
   WA_FIELDCATALOG-FIELDNAME = 'VALUE7'.
   WA_FIELDCATALOG-SELTEXT_L = 'Contribution EE(due)'.
WA_FIELDCATALOG-DATATYPE = 'INT2'.           " it will remove trailing zero
WA_FIELDCATALOG-DECIMALS_OUT = 0.
   APPEND WA_FIELDCATALOG TO IT_FIELDCATALOG.
   CLEAR WA_FIELDCATALOG.

I want to remove Trailing zeros from a charecter value

Hello ,
 i want to remove trailing zeros for a prticular value.Following is my code :
DATA: V_FLOAT TYPE F VALUE '4.8240000000000000E+03',
 V_CHAR(25) ,
 P10_4(10) TYPE P DECIMALS 4.
CALL FUNCTION 'CEVA_CONVERT_FLOAT_TO_CHAR'
EXPORTING
FLOAT_IMP = V_FLOAT
FORMAT_IMP = P10_4
ROUND_IMP = ' '
IMPORTING
CHAR_EXP = V_CHAR.
SHIFT V_CHAR RIGHT DELETING TRAILING '0'.
WRITE : V_CHAR ."NO-ZERO.
Output:
if we pass the value '1.3000000000000000E+01' it should be 13.0
ex2: '1.3400000000000000E+01' it should be 13.4
ex3:'4.8240000000000000E+03' it should be 4824
is there any way to get the solution without functional module. If so Please tell me with code.

hi
u can do it in number of ways.
Use TCODE SU3
Select default tab and select radio button 123467.89 in decimal notation and save it.
or u can try :
if you want to do this through ABAP program.
1. to delete trailing spaces.
SHIFT <V_VARIABLE> RIGHT DELETING TRAILING '0'.
to delete leading zeroes,
SHIFT <VARIABLE_NAME> LEFT DELETING LEADING '0'.
only for one abap program, u can use set country command
for all programs :
sap menu>system->go to user profil->own data>default --> and choose ur format.
hope this helps u.
Regards,
Prasanth
Reward all hepful replies

How to remove Leading zeros from MATNR "at Database Level"

Hi,
When we create a material in MM01 , we can either create material as Internal Material No. or External Material No. (By Explicitly entering a material No.)
Our requirement is that: When we create an Internal Material , there should NOT be any Leading Zeros in MATNR.
and for External Material No. , Leading Zeros Should be there. (In Database)
1) Now , we can create the No. Range for material in such a way that it will allow only AlphaNumeric entries for Internal Material , and Only Numeric Entries for External Material No.
This should slove the Purpose.
But According to the Client's requirement , Material No can be Numeric OR Alphanumeric for Internal As well as External Material No.
2) We can Add or Remove leading zeros from MATNR at application level. i.e. we can find some BADI / Enhancement where we will Use the Conversion FM (CONVERSION_EXIT_MATN1_OUTPUT or CONVERSION_EXIT_ALPHA_OUTPUT) and remove Leading Zeros from MATNR. But these changes will NOT reflect at Database Level , Because in MATNR Domain , there is a conversion Routine , That will Add Leading Zeros in MATNR While saving in the Database.
3) While Displaying the Material In SE11 , we can also set the "Display Format" as With leading Zeros OR Without Leading Zeros.
But we dont want to Just "Display" material with OR Without Leading Zeros. we want to actually create materials in that way.
What can we do , so that at Database Level our changes are Reflected.
Thanks and Regards,
Anand Gore
Edited by: anandgore on May 18, 2011 3:47 PM

That will Add Leading Zeros in MATNR While saving in the Database.
That is because you have it configured that way. You can configure the storage as you desire. The default is the behavior you are describing. You, or your functional analyst, need to review the documentation on the MM config settings for material master number storage.
Never use CONVERSION_EXIT_ALPHA_OUTPUT for material conversion. Also keep in mind that the MATN1 functions have their own BADI for extended formatting...

How to remove trailing zeros using EngineeringFormatInfo?

HI,
I found a measurement studio formatter for SI notation.
For details, see the NI document.
Here, I want to know how to remove any trailing zeros. I could not find any information about this.
For example,
code : string result = string.Format(EngineeringFormatInfo.Default, {0:s5}, double value)
if value = 1.2345678E-3, result is 1.23457E-3. It is ok.
if value = 1.2E-3, result is 1.20000E-3. But I want to get "1.23m".
In labview, I usually use "%#.5p" format string.

diluculo wrote:
HI,
I found a measurement studio formatter for SI notation.
For details, see the NI document.
Here, I want to know how to remove any trailing zeros. I could not find any information about this.
For example,
code : string result = string.Format(EngineeringFormatInfo.Default, {0:s5}, double value)
if value = 1.2345678E-3, result is 1.23457E-3. It is ok.
if value = 1.2E-3, result is 1.20000E-3. But I want to get "1.23m".
In labview, I usually use "%#.5p" format string.
I don't understand how you are getting 1.23457E-3 ? And claiming that is okay.
If you are using the format string that you claim you are using, then you should be getting 1.23457m.
It sounds like you are using string result = string.Format(EngineeringFormatInfo.Default, {0:E5}, value)

How to remove trailing zeros 20353675.0000000

All numeric decimal columns all are showing trailing zeros, how to remove them while processing within the query transform.
20353675.0000000
Thanks a lot for the helpful info

You can use the trunc function to remove the decimal places.
Syntax: trunc( number, [ decimal_places ] )
 <number> is the number to truncate.
 <decimal_places> is the number of decimal places to truncate to. This value must be an integer. If this parameter is omitted, the trunc function will truncate the number to 0 decimal places.
Eg: trunc(125.815) would return 125
 trunc(125.815,0) would return 125
 trunc(125.815,1) would return 125.8
 trunc(125.815,2) would return 125.81
 trunc(125.815,-1) would return 120

How to remove leading zeros from a string

Hi,
I have a situation here where i need to remove the leading zeros from the incoming data.
i.e if 0009 then it should be taken as 9
   if 0230 it should be taken as 230
Regards,
Ashish

Hi ,
Write UDF to parse data .
                String dataVal="0230";
          int parseVal = Integer.parseInt(dataVal);
          System.out.println("parseVal is "+parseVal);
result.addValue(parseVal); or return parseVal;
Nanda

How to remove leading zeros from the screen?

Hello friends,
I am working on dialog programming.
I have a field with is NUMC 13. so when value is populated, It removes the leading zeros.
How can I display the my value with leading zeros on the screen painter?

Call SE51, layout, double-click on field, attributes, tab Program, check Leading zeros.
Regards,
Raymond

How to removed leading zeros from a date field.

CONVERT(NVARCHAR, CONVERT(DATETIME, CONVERT(CHAR(8), STM.CreationDate)), 101)
This is what i currently have, but prints 02/03/2014 i would like to print the date without the zeros when applicable.
Thanks in advance.

>>REPLACE(LTRIM(REPLACE(CONVERT(NVARCHAR, CONVERT(DATETIME, CONVERT(CHAR(8), STM.CreationDate)), 101),'0', ' ')), ' ', '0')
Does this query really works? I doubt
Satheesh
My Blog |
How to ask questions in technical forum

How to remove the "0" from the sum cell when the other cells are empty?

Hello!
When I use the formula to sum the values from a few cells, there is a zero in the sum cell when the other cells are empty.
My question concerns how to remove the 0 from the sum cell when the cells that will be summed are empty.
Thank you!
/Johan Strömbeck

Hi,
Please try the Mr. Laurence's suggestion first. Then, we may try the other workarounds.
1) Go to Excel option> Advanced>Display Option for this worksheet> Uncheck Show a zero in cells that have zero value
2) Go to Conditional Formatting>New Rule>Format only cells that contain> Value equal to 0> Format the color with white
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support

Removing leading zeros from a string value

Hi All,
i have a Requirement like , i need remove leading zeros from a string value,
like , 00Raj00Shekar==>Raj00shekar,
how can i do this ?
if it is only with the custom functions ,where can add the fuction in Jdeveloper and SOA Middle ware?
Thanks in Advance,
Raj

Hi Raj,
you can use below function to get the desired output in xsl.
<xsl:value-of select='translate(oraext:left-trim(translate(<inpString>,"0"," "))," ","0")'/>
HTH,
Regards,
Vikas Manchanda

Remove leading Zeros from the mapped context node(Table)

HI,
I have he following requirement:
In the Leave approval application , in the Approver worklist we have the coloumn to display the resuqester's Perner.
The perner starts with leading zeros. We have to remove these leading zeros.
I have refer the following threads:
Removing leading zeros in a column
How to remove leading zeroes of string
and wiki document:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/java/remove%252bleading%252band%252btrailing%252bzeros%252bfrom%252ba%252bstring
but I am not able to create the calculated attribute in the Mapped Node( NWDS is not allowing indicating it is not allowed for mapped nodes.)
Any pointer how I can remove leading Zeros from existing column?
If I create the calculated attribute outside the mapped node then it is taking only the first value of the mapped node.
Please note we do not want to modify the RFC.
_vishal

Hi,
Thanks for inputs,
Now I created a test application where the original structure is as follows in the View Controller:
1) Context -> Z_Portal_Test_Input (mapped Node/folder) -> IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
note: this attribute Eid has the values (01, 02,03,04,05)
2)Context -> Z_Portal_Test_Input (mapped Node/folder) -> Output(mapped Node/folder) ->IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
Now as per your suggestion I created another node like this
Context -> Z_Portal_Test_Input (mapped Node/folder) ->testnode(value node) ->testValue(value attribute)
testnode cardinality is 1..1 and singlton = false
In the Layout
The tablecell editor of one coloumn is mapped to text     Z_Portal_Test_Input.testnode.testvalue
It is expected that this will show the values like(1,2,3,4,5) but it is showing value(1,1,1,1,1)
The code of get method is:
public java.lang.String getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement element)
    //@@begin getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement)
      String msg =wdContext.nodeZ_Portal_Test_Input().nodeOutput().nodeIt_Itab().currentIt_ItabElement().getEid();
        return removeLeadingZeroes(msg);
    //@@end
the functon removeLeadingZeroes(msg) is implemented as per the wiki link.
What wrong I am doing/ missing....
_vishal

How to remove trailing zeros from a fraction part.

Similar Messages

Maybe you are looking for