How to remove trailing zeros 20353675.0000000
All numeric decimal columns all are showing trailing zeros, how to remove them while processing within the query transform.
20353675.0000000
Thanks a lot for the helpful info
You can use the trunc function to remove the decimal places.
Syntax: trunc( number, [ decimal_places ] )
<number> is the number to truncate.
<decimal_places> is the number of decimal places to truncate to. This value must be an integer. If this parameter is omitted, the trunc function will truncate the number to 0 decimal places.
Eg: trunc(125.815) would return 125
trunc(125.815,0) would return 125
trunc(125.815,1) would return 125.8
trunc(125.815,2) would return 125.81
trunc(125.815,-1) would return 120
Similar Messages
-
How to remove trailing zeros from a fraction part.
How to remove trailing zeros from fraction part, need standard API rather then some java code.
user8726363 wrote:
How to remove trailing zeros from fraction part, need standard API rather then some java code.I'm pretty sure we have all gathered that English is not your first language, but your question is not a good question in any language.
Back up. Take a deep breath.
Now - what's your problem ?
Please illustrate with results, and the code (just the class/method; not your entire application) that is causing them.
Winston -
How to remove trailing zeros from a decimal (type) value?
Hi Everyone,
I would like to 'drop' some trailing zeros from a decimal value, e.g.: 50.000000, and I am wondering how to go about this?
The value is definitely of decimal type, and in this instance I know that I want to eliminate exactly six (6) zeros.
Any help here will be greatly appreciated.
Kind Regards,
DavidTry the below:
This is sort of a display issue, you may do it at Application side, which would be efficient.
Declare @s Decimal(10,6)='50.0000000'
Select Cast(@s as decimal(10,0)) -
How to remove trailing zeros using EngineeringFormatInfo?
HI,
I found a measurement studio formatter for SI notation.
For details, see the NI document.
Here, I want to know how to remove any trailing zeros. I could not find any information about this.
For example,
code : string result = string.Format(EngineeringFormatInfo.Default, {0:s5}, double value)
if value = 1.2345678E-3, result is 1.23457E-3. It is ok.
if value = 1.2E-3, result is 1.20000E-3. But I want to get "1.23m".
In labview, I usually use "%#.5p" format string.diluculo wrote:
HI,
I found a measurement studio formatter for SI notation.
For details, see the NI document.
Here, I want to know how to remove any trailing zeros. I could not find any information about this.
For example,
code : string result = string.Format(EngineeringFormatInfo.Default, {0:s5}, double value)
if value = 1.2345678E-3, result is 1.23457E-3. It is ok.
if value = 1.2E-3, result is 1.20000E-3. But I want to get "1.23m".
In labview, I usually use "%#.5p" format string.
I don't understand how you are getting 1.23457E-3 ? And claiming that is okay.
If you are using the format string that you claim you are using, then you should be getting 1.23457m.
It sounds like you are using string result = string.Format(EngineeringFormatInfo.Default, {0:E5}, value) -
How to delete trailing zeros from a quantity field to display in ALV?
Hi there,
i am retrieving the field LGMNG from LIPS table, which is of type QUAN(13). All LGMNG values there are stored as
1,000
20,000
50,000 etc.
But i want my values to be displayed as
1
20
50 etc.
i have tried the " shift v_variable right deleting trailing '0'" but it does not work.
also, if the value of LIPS_LGMNG = 0,000, i need those columns in ALV empty(that is no zeros or comma displayed)
can anyone please help?
Thanks a lot,
Meehi,
use this it will solve your problem, just write down this on your Fieldcatalog.
WA_FIELDCATALOG-FIELDNAME = 'VALUE7'.
WA_FIELDCATALOG-SELTEXT_L = 'Contribution EE(due)'.
WA_FIELDCATALOG-DATATYPE = 'INT2'. " it will remove trailing zero
WA_FIELDCATALOG-DECIMALS_OUT = 0.
APPEND WA_FIELDCATALOG TO IT_FIELDCATALOG.
CLEAR WA_FIELDCATALOG. -
I want to remove Trailing zeros from a charecter value
Hello ,
i want to remove trailing zeros for a prticular value.Following is my code :
DATA: V_FLOAT TYPE F VALUE '4.8240000000000000E+03',
V_CHAR(25) ,
P10_4(10) TYPE P DECIMALS 4.
CALL FUNCTION 'CEVA_CONVERT_FLOAT_TO_CHAR'
EXPORTING
FLOAT_IMP = V_FLOAT
FORMAT_IMP = P10_4
ROUND_IMP = ' '
IMPORTING
CHAR_EXP = V_CHAR.
SHIFT V_CHAR RIGHT DELETING TRAILING '0'.
WRITE : V_CHAR ."NO-ZERO.
<u><b>Output:</b></u>
if we pass the value '1.3000000000000000E+01' it should be 13.0
ex2: '1.3400000000000000E+01' it should be 13.4
ex3:'4.8240000000000000E+03' it should be 4824
is there any way to get the solution without functional module. If so Please tell me with code.hi
u can do it in number of ways.
Use TCODE SU3
Select default tab and select radio button 123467.89 in decimal notation and save it.
or u can try :
if you want to do this through ABAP program.
1. to delete trailing spaces.
SHIFT <V_VARIABLE> RIGHT DELETING TRAILING '0'.
to delete leading zeroes,
SHIFT <VARIABLE_NAME> LEFT DELETING LEADING '0'.
only for one abap program, u can use set country command
for all programs :
sap menu>system->go to user profil->own data>default --> and choose ur format.
hope this helps u.
Regards,
Prasanth
Reward all hepful replies -
How to remove leading zero from Material Number
Hello Everyone,
I need to figure it out how to remove leading zero from material number. Cureently extractor is sending material number as 100663. But when comes into BI i am getting as "000000000000100663" and similariy in report it is appearing as "000000000000100663". Now my client wants me to exclude preceeding zero for a material in all the reports.
Is there any setting in query desinger to handle this issure or in the backend.
Need your inputs.
Thanks,
Lasya.Hi
you can use the function Module
CONVERSION_EXIT_ALPHA_OUTPUT in the start routine
to test this go to SE37 --- give the CONVERSION_EXIT_ALPHA_OUTPUT -
>display -
> F8
in the input give 000000456
and execute
the out put will be 456
for getting Zeros you can use
CONVERSION_EXIT_ALPHA_INPUT--- to remove leading zeros
Santosh
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:52 PM
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:54 PM -
How to remove leading zeros from variable
hi,
how to remove leading zeros from variable like it_vbap-matnr.
value in it_vbap-matnr is 000000000000000358
i want to remove leading zeros so that it become 358
regards
deepakYou can use Function Module <b>'CONVERSION_EXIT_MATN1_OUTPUT'</b>
This Function Module will eliminate leading Zeros.
For each MATNR Value read form DB Table,u can eliminate Leading zeros and then modify ur Internal table.
I think u will not get leading Zeros into utr Internal table when u read from VBAP.
Bcoz MATNR in VBAP itself have Conversion routine.
If u r getting leading zeros,U can use following Logic.
tables:
vbap.
data:
t_vbap like standard table of vbap.
select matnr
from vbap
into corresponding fields of table t_vbap.
loop at t_vbap into vbap.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_OUTPUT'
EXPORTING
INPUT = vbap-matnr
IMPORTING
OUTPUT = vbap-matnr
modify t_vbap from vbap transporting matnr.
endloop.
Hope this will work..... -
How to remove leading zeros for an item number within quickviewer
how to remove leading zeros for an item number within quickviewer. Pls help
ask your abap guy to do it. not portal guys business.
-
How to delete Trailing zeros in a string array
I am reading data from RS232 port and storing the values in an array of 16 nos. Then converting the array of numbers into string using 'number to fractional string" function with precession 2 and sending the data string to Table. I am printing this table further for report generation.
I am unable to remove the trailing zeros as i am defining precession 2 which is not needed for all the numbers in the table.
Please help me how to remove the trailing zeros after decimal point which is very much necessary for report generation.
regards
Prasanna Kumar N MUse format into string in a FOR loop with a format specified of %#f. See attached example (LabVIEW 7.0)
Message Edited by altenbach on 10-14-2006 05:40 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
AutoFormat.vi 17 KB
AutoFormat.png 3 KB -
How to delete trailing zeros after decimal ?
Hi,
i want to delete trailing zeros after decimal.
Example:
if it is 22.000 then output will be 22
if it is 22.010 then output will be 22.01.
plz let me know hw to do this ?DATA:
lv_decimal TYPE f DECIMALS 3,
lv_string TYPE string.
lv_decimal = '22.010'.
WRITE lv_decimal TO lv_string.
SHIFT lv_string RIGHT DELETING TRAILING '0'.
CONDENSE lv_string NO-GAPS.
* now no trailing zeros are in the decimal stored in LV_STRING
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jan 30, 2008 12:10 PM -
How to remove leading zeroes of a coloumn in a table
can someone tell me how to remove the leading zeroes in a table's coloumn .... its a NUMC data type..
i tried with abap statement shift leading zeroes, but its not working for me.... the sorting is missing..
in properties is there any option to remove the leading zerores>
nirajaHi Niraja,
I am displaying a table with information from SFLIGHT. The CONNID field is of type NUMC and so it too used to contain the leading zeroes. I so deleted the leading zeroes in my WDDOINIT method before binding the internal table to the context node. The table now does not display the leading zeroes as earlier. Find my coding as shown below:
METHOD wddoinit .
DATA: lr_node TYPE REF TO if_wd_context_node,
wa_sflight TYPE ig_componentcontroller=>element_node,
lt_sflight TYPE ig_componentcontroller=>elements_node.
SELECT * FROM sflight INTO TABLE lt_sflight.
LOOP AT lt_sflight INTO wa_sflight.
SHIFT wa_sflight-connid LEFT DELETING LEADING '0'.
MODIFY lt_sflight FROM wa_sflight TRANSPORTING connid.
ENDLOOP.
lr_node = wd_context->get_child_node( name = ig_componentcontroller=>wdctx_node ).
lr_node->bind_table( new_items = lt_sflight ).
ENDMETHOD.
Regards,
Uday -
How to remove leading zero in a inputfield
I have a inputfield UI element which is bind to a NUM type context. When it display a number, it always come with leading zero, like '001'. Can anyone teach me how to remove the leading zero.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3a/2232666aeb45f4b759848a4caf9c8b/frameset.htm
Use the Display leading zeros formatting option in the context attribute properties.
The other option is to use a data dictionary domain for the field that has a built in field conversion exit. The ALPHA conversion exit is commonly used on NUMC fields like Sales Order number to suppress leading zeros. The WD runtime will automatically use the underlying DDIC Domain Field Conversion Exit. You don't need to do anything except use that DDic to define the context. -
I have a field 'Bill No.' of Character(10) type in my dialog program. Once I input and save value e.g. '1' in this it gets saved as 1 but in the internal table it gets stored as '0000000001'. Pls let me know how to remove these leading zeros: perhaps I'll have to use LTRIM but I am not sure.
deepak.Hi
Use the fm CONVERSION_EXIT_ALPHA_OUTPUT.
DATA: P(10) VALUE '0000000001'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = P
IMPORTING
OUTPUT = P.
WRITE P.
Max -
How to remove leading zeroes of string
Hello All,
I have a scenario where Partnumber string type shows 00000000012345 format, I want to remove leading zeroe and displ only 12345 .
How to do it,
SuggestHi Pradeep,
Please go through this wiki. [https://www.sdn.sap.com/irj/scn/wiki?path=/display/java/remove%252bleading%252band%252btrailing%252bzeros%252bfrom%252ba%252bstring]
It explains how to remove zeros from strings.
extract from the wiki. This is an efficient way.
public java.lang.String removeLeadingZeros( java.lang.String str ){
if (str == null){
return null;
char[] chars = str.toCharArray();
int index = 0;
for (; index < str.length();index++){
if (chars[index] != '0'){
break;
return (index == 0) ? str :str.substring(index);
If you want to show this string in a table instead of the ones with zeros you can create a calculated attribute of type string on the same node and in the getter method read the string with zeros using getAttributeValue() api and pass the string to the above method and return that string value.
You can also have another approach if you will only have numbers in your string. Have a calculated attribute of type int. In the getter method read the String using getAttributeValue() api and then convert it to an int using Integer.parseInt(String) and return the int value.
Regards,
Sanyev
Maybe you are looking for
-
Problems with memory after i reset my ipod
I reset my 30 GB ipod and when checking out how much space i have found that i only had 7.7 gb available.
-
Adding Custom Fields to FAGLFLEXP Table
Hello, We have a requirement to update WBS Element for Planning related Data. So have added custom field(WBS Element) in structure CI_FAGLFLEX04. The field is visible when I open FAGLFLEXP table, but when I post data The custom field (WBS Element) i
-
CR08 report published on BOEXI works fine, but not on CRS08 (JDBC conn)
CR08 report published on BOEXI works fine, but same report published on CRS08 does not work (JDBC connectivity) The workflow is: 1 - Crystal Report was created using CR2008 using JDBC connectivity, 2 - Published on BOEXI, and 3 - Same report accessed
-
Budget effected for current year for changing a PO of last year
Dear Controlling firends, I am a MM guy and facing the titled difficulty. The problem is ,suppose a Po had been created in last fiscal year and at that time budget for last year has been consumed as committed. But now when I am changing that particul
-
Navigation bar not displaying current site
sometimes it shows the current site address, sometimes it just says enter an address as if you just opened a new tab.