How to remove User from ProcessRoleInstance Dynamically

Hi All,
I have a requirement of removing a user from the assigned users of a processRoleInstance at runtime.I have tried
executionContext.getProcessRoleInstance().removeRuntimeDefinedUser(user) but its not working properly.Even after executing it ,user remains as a processor of this ProcessRoleInstance.Please help.
Regards
Vikrant

i thiing it should work with updateing UI
try ....
MainPanel.remove(btnFix[1]);
MainPanel.remove(btnFix[2]);
MainPanel.remove(btnFix[3]);
MainPanel.updateUI();
best luck

Similar Messages

How to Remove User from Built in Administrators group With Group Policy Enabled

Hi,
I want to remove user from Administrator group which is in restricted group. So I cannot remove him through Active Directory what is the way to remove user from Administrator restricted group.
Thanks
Jibran Ishtiaq

> Disable Group policy
"Edit", not "Disable"
> Under Domain click Delegation and went to the restricted group account.
> Remove User from group.
Why "Delegation"? Simply edit the GP object where the "Restricted
Groups" setting is in place...
> Also we have two DNS but one from where I remove account is the primary.
How is DNS related to group policy?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How to remove user from custom DLU Group

Hi,
I have created a DLU policy that creates a local user, and places this user
in a custom local group (Group is already present on the system). Now I want
to remove this user from this custom group and place it in another custom
group. I have created a second DLU policy to place the user in the new
custom group. The new custom group is added fine, but the old custom group
assignment also remains. How should I set up the policy so that the user is
removed from the old custom group, or is this not possible?
Regards,
Hen

Hen,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How to remove text from .swf animation?

how to remove text from .swf animation? Can no find this text
in fla file. Flash 8.

exactly what 'text' are you referring to? text that you typed
on the Stage using the 'textTool'? simply select the text with the
'arrowTool' and hit delete.
If you are referring to a textField that you want to
eliminate after a certain amount of time, within your animation
sequence. first copy the text, create a new layer, paste the text
in place, then where you want to have the text 'disappear' insert a
'blank keyframe' at that point in the text layer.
OR place the textfield within a MC and remove it with code.
OR if the text is dynamic and you wish to use the position at a
later time, pass a value of null or and empty string to the field
at the point you wish. And there are other ways still. :) hope one
of these works for you.

How to filter results from 4 dynamic list menus depandant on how many of them are selected

I have a search page with a form with 4 list menus and 1 submit that post the results to the results page. I can create a record set that either retrieves the correct data from my database if a selection is made from all four menus Or i can create the recordset if only 3 menus have a selection or the same for 2 menus and 1 menu. However i want the user to be able to make a selection from either 1, 2, 3 or all 4 of the menus and the exact data be retrieved. At present if i try to combine the recordset using AND and ORs the results are not specific enough, for example the 4 menus are Location, Type, Price & Style if a user selects from all 4 i only want to retrieve data that matches all 4 criteria, but at the same time if the user selects only 2 of the menus the i want it to retrieve data that matches specifically those 2 variables. I´m not actually sure if i should be creating a more advanced sql query of if its the php side of things that i need to look at. This is my first dynamic site so please be aware i´m still a learner where php and sql is concerned. Please can anyone help?

Hey there,
Thanks for replying,
I too am using Dreamweaver recordset, my local server is XAMPP ( apache php mysql), i´have pasted my sql recordset below to give an idea of what i´m trying to do, however this does not work as i´m trying to select the exact data based on 4 menus PRICE TYPE LOCATION and BEDS, and also want the search to work if the user only selects options from either 1, 2, 3 or 4 of the menus, with the code as it is if the user select only two options from 2 of the menus the results don´t just find (for example) all results for location AND price they find all results for the location varibale OR the price variable rather than a match for both, if you see what i mean?
Any suggestions?
SELECT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number`
FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid
WHERE (location=varloc AND price = varprice AND type=vartype AND beds=varbed ) OR (price=varprice AND location=varloc AND type=vartype) OR (price=varprice AND location=varloc AND beds=varbed) OR (price=varprice AND beds=varbed AND type=vartype) OR ( location=varloc AND type=vartype AND beds=varbed) OR (price=varprice AND location=varloc) OR (price=varprice AND type=vartype) OR (price=varprice AND beds=varbed) OR (type=vartype AND location=varloc) OR (type=vartype AND beds=beds) OR (location=varloc AND beds=varbed) OR (price = varprice OR beds=varbed OR type=vartype OR location=varloc)
ORDER BY detailstable.trueprice ASC
Look forward to receiving your thoughts,
Linda
Date: Wed, 21 Oct 2009 14:36:33 -0600
From: [email protected]
To: [email protected]
Subject: how to filter results from 4 dynamic list menus depandant on how many of them are selected
Hiya,
I'm just doing my first dynamic site too, and am at a similar level to yourself.
Can you give us more info re the site. What software, eg Dreamweaver etc are you using, and is your server using PHP or ASP etc?
For what I've used, I amended the SQL side of things in the recordset in Dreamweaver. That way, you can test the SQL as you're setting up the recordset.
Let me know how you're going on anyway
Cheers
Andy
>

To remove user from Group

I created a new user account from SSH connection to our cluster. The user belongs to two groups by default: nobody and wheel. I tried to delete him from the two group by using dscl command, I got the following error:
/NetInfo/root/Groups > delete wheel GroupMembership ryan
<main> attribute status: eDSAttributeNotFound
/NetInfo/root/Groups > read wheel
AppleMetaNodeLocation: /NetInfo/root
GeneratedUID: ABCDEFAB-CDEF-......
GroupMembership: root
Password: *
PrimaryGroupID: 0
RealName: System Group
RecordName: wheel
RecordType: dsRecTypeStandard:Groups
SMBSID: ......
I would like to know how to remove him from the two groups. Thank you very much.
Apple Cluster Mac OS X (10.4.3)

I had to update the code to the following because Get-SPUser was not working properly:
$url = "https://sharepointdev.spfarm.spcorp.com/sites/desitecoll"
$userName = "spfarm\spprofileimport";
$site = New-Object Microsoft.SharePoint.SPSite($url)
$web = $site.OpenWeb()
$siteGroups = $web.Groups;
Clear-Host
$mySiteGroups = @();
foreach($group in $siteGroups)
Write-Host $group
$mySiteGroups += $group;
}#foreach
$members = $web.Groups[$mySiteGroups[0]];
$owners = $web.Groups[$mySiteGroups[1]];
$visitors = $web.Groups[$mySiteGroups[2]];
#Convert the user name to an SPUser account
$spUser = $web.Site.RootWeb.EnsureUser($userName);
Write-Host $spUser.ID
Remove-SPUser -Identity $spUser -Web $url -Group $owners
$web.Update();
$web.Dispose();
Write-Host "User " $userName "removed from " $owners
Was I not using Get-SPUser correctly?

How to remove songs from iPad?

I've read several threds from users asking how to remove songs from the iPad 1.0, but have not found anyone with the symptoms mine has.
For some unknown reason, the checkbox next to each song to remove them from the iPad is disabled.
My latest attempt at removing all of the music was to tell iTunes to "Sync Music" with "Entire Music Library' selected. That caused iTunes to push all 2700+ songs to the iPad. I checked to see if I could remove the songs from the iPad by de-selecting the checkbox, but the checkbox was still disabled.
So I told iTunes to stop syncing Music. I acknowledged the warning message that this would remove all songs from the iPad. Perfect - remove everything and I'll manually add the songs I want to put back on. However, the results were not what was intended... I am back to where I started:
When I open "Music" on my iPad, it shows lots of albums and songs (over 2700).
When I view my iPad using iTunes, "Sync Music" is disabled and the capacity indicator shows 11.1GB of space allocated to audio files.
When I view my iPad's Music folder using iTunes, it shows only 3 albums.
At this point, I am thinking my only option is to wipe the iPad and manually add everything back on. I'd rather not do that... but am out of options I can think of.

I cannot delete music from my iPad2. I've gone into iTunes and selected to manually manage my music. When I click on my iPad and then MUSIC, I don't see any songs listed. When I look at my iPad itself under usic there are a ton there. I just want to keep my iPad free of music. I don't need my music on my phone and my iPOD (yes, I still use an iPOD and I still like my music SEPARATE.)
HELP
Thanks.
PS: I'm using iTune 11.1.3.8
iTunes software and iPad software up-to-date

How to remove ICS from my Calendars

I have click link webcal://www.apple.com/batteries/images/ipod_icalreminder.ics use iphone.How to remove it from my Calendars?

V.K. wrote:
You need to disable the root user. From what I understand you enabled it from the install DVD's password reset.
Use [these instructions|http://docs.info.apple.com/article.html?artnum=106290] to disable it.
Those instructions led me down this path, I have not the head to deal with them again today. My eyes glaze-over listening to myself read them aloud. SZ
Message was edited by: ShakuZen

Who removed user from AD Universal secuirty group

Hello , i am trying to find who removed user from universal AD group , i checked audit management policy is enabled but some how event is not getting generated or unable to find those events so please help how to find who did that job - removed the user
from universal security group.
And suppose if anybody is deleting and the logs should be generated on one of the local site Domain controller is that correct ? so anywhere or it can be generated on the member server. Any free third party tool who can help here .
Thanks

Here is another informative technet blog resource that helps to track all the changes made in active directory : http://blogs.technet.com/b/askpfeplat/archive/2012/03/05/how-to-track-the-who-what-when-and-where-of-active-directory-attribute-changes-part-i-the-case-of-the-mysteriously-modified-upn.aspx
If you wish to audit such changes automatically, you may also consider on this automated solution (http://www.activedirectoryaudit.com/) that would be a better approach to audit all the critical changes
into real time and get instant notification for through customized email notification.

How to Block user from Sending IM or Hide Presence of there user who is not in his department

Hi All,
How to Block user from Sending IM or Hide Presence of there user who is not in his department.
Thank you

Hi Jp,
Method 1:
You can use the Enhanced Privacy Mode in Lync 2013
<section class="ocpSection">
Enable Privacy Mode
By default, everyone except Blocked Contacts can see your presence status. To modify the privacy settings, you can do the following:
In the Lync main window, click the Options button.
In the Lync - Options dialog box, click Status, and then do one of the following:
Click I want everyone to be able to see my presence regardless of system settings (override default settings).
Click I want the system administrator to decide - currently everyone can see my presence but this could change in the future.
</section>
About Enhanced Privacy Mode
If your organization has enabled Enhanced Privacy Mode in Lync, you can choose whether to limit visibility of your presence information to only those people you’ve added to your Contacts list. You do that by selecting one of the following on the
Options->Status window:
I want everyone to be able to see my presence
I only want people in my Contacts list to see my presence
Method 2:
Using Privacy Relationship, you can block a particular user by adding him to blocked contacts
Anil Kumar (MCITP)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Project Server 2013 - Remove user from resource pool via sync

Hello everyone,
has anyone managed to configure their Project Server 2013 box with a resource pool sync that will actually remove user from the resource pool (disable "User can be assigned as resource" or deactivate users) when the user is removed from the AD
group(s)?
Setup: Single box, SQL 2012 SP1, SharePoint/Project Server 2013 + PU March + CU April. 2 PWA instances, 1 in SharePoint and 1 in Project permission mode. Tried on 2 different machines (different setup, accounts, domains).
Proceedings:
Create AD user U, AD group G. Add U to G.
Go to PWA, setup resource pool sync with G, sync.
U is now in the resource pool, has no PWA permissions.
Remove U from G. Resync resoure pool.
U is still in resource pool, still a resource, still active, can still be assigned as resource.
Adding U back to G an repeating the whole spiel with a resource pool and a PWA group sync of G will result in U being added and removed from the user list (as expected), and U being added but not removed from the resource pool.
Having read
http://technet.microsoft.com/en-us/library/gg982985.aspx and
http://technet.microsoft.com/en-us/library/gg750243.aspx, there does not seem to be an omission on my part.
The first article states:
Note:
The corresponding Project Server User Account is not deactivated based on this synchronization. If the same Active Directory user is configured to synchronize with a Project Server security group, the Project Server user account will be inactivated when
that synchronization occurs. For more information, see
Best practices to configure Active Directory groups for Enterprise Resource Pool synchronization in Project Server 2013.
Unfortunately, this deactivation either does not seem to occur even with a PWA group sync or I misunderstood the article.
So, did anyone manage to setup their resource pool sync in a way, that new resource will be added, but also be removed from the resource pool?
Kind regards,
Adrian

Hi Adrian,
you tried to sync the same AD group that you used for the resource pool sync also with a Project Server permission group?
And on removal of the user of the AD group the project user/resource is not deactivated? Only removed from the group
Regards
Christoph
Hi Christoph,
even though I might have tried that before, I tried it again in several constellations. It didn't change anything. The the user will be properly added to and removed from the PWA group whenever I remove them from the AD group, the use will also stay active
(but cannot logon without permissions). However, the user will always remain in the resource pool, i.e. the "User can be assigned as resource." checkbox will remain unless it is cleared manually.
Having re-read the technet articles, none of the scenarios actually seem to descibe or address the process that I require, or maybe I'm just misunderstanding. Let me just try to outline the core issue:
Add user to AD group. Sync AD group with resource pool. User is now a PWA resource and PWA user.
Remove user from AD group, but do not deactivate/delete user from AD.
(Magic happens!)
User cannot be assigned as ressource in PWA.
So, is there anything to make this step 3 happen, or is it just not possible to sync users out of the resource pool anymore unless they are deleted/deactivated in AD?
Kind regards,
Adrian

HT1386 The first time I synced my iphone with my mac, I didn't realize that all of my photos from iphoto would transfer over to the phone. Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the

The first time I synced my iphone 4 with my mac, I didn't realize that all of my photos from the iphoto library would transfer over to the phone (more than 3,000). Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the phone. I tried to uncheck boxes and sync again, but I get a message that there is no room on the iphone. I've read as many articles as I can find, but still cannot manage this. Thanks for any help.

Open itunes, connect iphone, select what you want, sync

How to remove pics from my 3GS...???

How to remove pics from my 3GS..???

Photos taken with the phone can be deleted by selecting them and hitting the little wastebasket icon in the right bottom corner.
Photos you did sync to your phone, can only be removed by deselecting them in the photo pane in iTunes, the following sync will remove them from the phone.

Does anyone know how to remove images from google

i had instagram and i didnt upload images of myself but i only used my own image in the display picture and some how it has gone on to the google image search yesterday i deleted my account but when i checked to see if my images do appear in the google images i had some really bad regrets !! i reallywant to know how i can remove pictures off the google image search even doe this does not kind of relate thank you .

Does anyone know how to remove vocals from an import from I tunes...a polyphonic stereo mix ?
If you are talking about some "Karaoke" method using Logic I'll try to offer one. Before that I must say that most of the Karaoke methods are based on reversing the Phase of one of the stereo channel and bussing or merging the stereo into Mono. The result is: killing all Pan Centered in the mix - like Main Vocal, Bass, Kick, SN ect.
The artifacts of the Stereo FX of the main vocal will stay in the Karaoke, cause the FX is stereo etc.
Here is the Logic Setup I can offer to try some Karaoke trick using Logic.
1. Import a Stereo mix into a Logic Stereo track.
2. Create another stereo track and duplicate (copy) the Original Mix region to the duplicated track.
3. Hard Pan L/R both stereo tracks.
4. Insert an EQ and Gainer plugins into the duplicated track (R).
5. Set the Output select of the both tracks to a Bus and assign the new Aux Track Switch mode to "Mono".
6. Open the Gainer plugin and thick the "Phase Invert" Right button.
7. To keep the "lowend" instruments like the bass and kick, open the EQ plugin and enable the Low Cut filter and try some Hz settings 80-115, or different Q which will sounds better for your Karaoke.
P.S Click the image below to show its real resolution!
Regards,
A.G
======================================
www.audiogrocery.com
Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
======================================

How to remove Unicode from XML file

I get following error when unmarshal xml:
[java] org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x15) was found in the element content of the document.
Anyone know how to remove Unicode from xml file? Can I remove the unicode by rebuild the file?
Thanks

These sort of error usually occur when you're using a different character encoding to read the file than the one you wrote it with. Perhaps if you were to post the problem section of the file and/or the code that created it in the first place.

How to remove User from ProcessRoleInstance Dynamically

Similar Messages

Maybe you are looking for