How to remove white spaces from XML content using Coldfusion?

Hi,
Can anybody help me in removing white spaces in between the tags from the below XML content using coldfusion?
XML content:
<?xml version="1.0" encoding="UTF-8"?> <chart showdates="true" today="08/12/2009"> <phases> <phase color="CCFFCC" name="Funded"/> <phase color="CDCD67" name="Concept"/> <phase color="99CCFF" name="Feasibility"/> <phase color="0099FF" name="Development"/> <phase color="0099FF" name="Development"/> <phase color="CC99FF" name="Close-out"/> <phase color="909090" name="Sustaining"/> </phases><program name=""> <project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "> <version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "> <phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/> <phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/> <phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/> <phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/> <phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/> </version> </project> </program> </chart>
Output I am expecting is like below,
<?xml version="1.0" encoding="UTF-8"?><chart showdates="true" today="08/12/2009"><phases><phase color="CCFFCC" name="Funded"/><phase color="CDCD67" name="Concept"/><phase color="99CCFF" name="Feasibility"/><phase color="0099FF" name="Development"/><phase color="0099FF" name="Development"/><phase color="CC99FF" name="Close-out"/><phase color="909090" name="Sustaining"/></phases><program name=""><project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "><version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "><phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/><phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/><phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/><phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/><phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/></version> </project></program></chart>
Thanks in advance,
Regards,
Manoz.

Daverms,
Thanks for the quick turn around..
I have applied the solution what you suggested above (<cfprocessingdrirective suppresswhitespaces="yes"), still whitespaces are existing in my output.
The output what I am getting is,
(blue color part is my output & red color indicates whitespaces)
<?xml version="1.0" encoding="UTF-8"?>
<chart showdates="true" today="09/12/2009">
<phases>
<phase color="CCFFCC" name="Funded"/>
<phase color="CDCD67" name="Concept"/>
<phase color="99CCFF" name="Feasibility"/>
<phase color="0099FF" name="Development"/>
<phase color="0099FF" name="Development"/>
<phase color="CC99FF" name="Close-out"/>
<phase color="909090" name="Sustaining"/>
</phases>
<program name="">
<project enddate=" 01/01/2010 " id="12059" startdate=" 20/06/2003 ">
<version enddate=" 01/01/2010 " number=" 1" startdate=" 20/06/2003 ">
        <phase color="CCFFCC" currentdate="20/06/2003" name="Project Start" plandate="20/06/2003" type="phase"/>
        <phase color="CDCD67" currentdate="" name="Concept Closure" plandate="" type="phase"/>
        <phase color="99CCFF" currentdate="20/06/2003" name="Feasibility Closure" plandate="20/06/2003" type="phase"/>
        <phase color="F0FF00" currentdate="" name="Alpha Test" plandate="" type="milestone"/>
        <phase color="F0FF00" currentdate="26/07/2004" name="Beta Test" plandate="31/05/2004" type="milestone"/>
        <phase color="0099FF" currentdate="29/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="24/02/2006" name="Project Closed" plandate="01/01/2010" type="phase"/>
        </version>
<subproject enddate=" 16/10/2008 " id="11809" name="espWatcher Pricing Toolkit" startdate=" 01/08/2003 ">
<version enddate=" 16/10/2008 " number=" 1" startdate=" 01/08/2003 ">
        <phase color="CCFFCC" currentdate="01/08/2003" name="Project Start" plandate="01/08/2003" type="phase"/>
        <phase color="99CCFF" currentdate="" name="Feasibility Closure" plandate="" type="phase"/>
        <phase color="0099FF" currentdate="15/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="16/10/2008" name="Project Closed" plandate="16/10/2008" type="phase"/>
        </version>
</subproject>
<subproject enddate=" 31/12/2070 " id="35704" name="espWatcher version 2 (2005)" startdate=" 01/01/2005 ">
<version enddate=" 31/12/2070 " number=" 1" startdate=" 01/01/2005 ">
        <phase color="CCFFCC" currentdate="01/01/2005" name="Project Start" plandate="01/01/2005" type="phase"/>
        <phase color="99CCFF" currentdate="01/07/2005" name="Feasibility Closure" plandate="01/07/2005" type="phase"/>
        <phase color="0099FF" currentdate="31/03/2006" name="Commercialization" plandate="31/03/2006" type="phase"/>
        <phase color="CC99FF" currentdate="31/12/2070" name="Project Closed" plandate="31/12/2070" type="phase"/>
        </version>
</subproject>
</project>
</program>
</chart>
However this solution removes most of the whitespaces, I want exact output as flash file is expecting so..
Where ever I am calling the CF functions, there I am getting the whitespaces. like below cases.
startdate="#getProjectStartDate(sProjectIdList)#" -> output I am getting for this statement is -> " 12/09/2009 "
Please assist me...
Regards,
Manoz.

Similar Messages

How to remove white space between two answer reports

How to remove white space between two answer reports
In Dashboard section I have 2 rqeuest. Each request renders Table View. When I display dashboard, it show white space separating the 2 table views. How do I get rid of the white space/white band ?

See this link
Re: Eliminating the space between two reports in OBIEE dashboard page Section
Regards,
Sandeep

Is it possible to exclude white space from creating records using UNPIVOT

SELECT
        FROM
            Table1
            UNPIVOT EXCLUDE NULLS
                NEW_COLUMN
                FOR COLUMN_NAME IN
                   FIELD1, field2, --------------FIELD20
            )I don't want to create row for whitespace (empty value) in any of field1-field20 columns. Row should create for each of value present in any of FIELD1-FIELD20. Is it possible to exclude white space from creating records using UNPIVOT? I am just looking for syntax if there any. thanks

Hi,
Sorry, it's very unclear what you want.
Whenever you have a question, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ {message:id=9360002}
Have you tried the the UNPIVOT EXCLUDE NULLS option? See the SQL Language manual for details.
It that doesn't do what you want, then you may need to UNPIVOT in a sub-query, generating more rows than you want, and use a WHERE clause in the main query to remove the unwanted rows.

How to remove extra spaces from Data Matrix Label?

Hi All,
Kindly let me know how we can remove extra spaces from Data Matrix Label.
Suppose we have this following code in SO10.
^FO1380,1879^COY,78^BY4^BXR,6,200^FH^FD[)>_1E06_1DF01001T_1D6JUN&v_huf&&v_hul&_1DV&v_supnum1&_1D16K&v_del&_1D6D&v_flddat1&095_1D2L&v_unload&_1D
P&v_article&_1D4L&v_madein&_1D_1E_04^FS.
Variable have there own value. and the desired result will be shown like the attachment.
But in my code it splits into new line when CMIR value has 3 spaces.
If CMIR value is 1S0 820 355 A . then it creats a new line.
Kindly suggest me any possible solution.
Thanks,
Partha

Hi Gaurav,
In print preview we can't see any space or new line. But when it scanned by TSB (barcode scanner) it will generate a new line when there is 3 space CMIR value.
So where should I write SHIFT CMIR LEFT DELETING LEADING space this code?
Because there is no space coming at the time of debugging or print preview.
And in SO10 the code written as
^FO1380,1879^BY4^BXR,6,200^FH^FD[)>
Here CMIR value is 1SO 820 303 A
and generated output is like this.
And desired output should be like this.

How do I generate HTML from XML & XSL using XSL Processor ?

I want to generate a HTML from XML & XSL using XDK for C on
linux-8i.
I run the XSLSample well.
But it only generate a XML from a XML & a XSL.
Can any one give me some advise or sample code?

Just use HTML tags instead of xml tags in your stylesheet, and
you'll generate HTML instead.
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
    <html>
      <body>
        <xsl:for-each select="ROWSET">
          <table border="1" cellspacing="0">
            <xsl:for-each select="ROW">
              <tr>
                <td><xsl:value-of select="EMPNO"/></td>
                <td><xsl:value-of select="ENAME"/></td>
              </tr>
            </xsl:for-each>
          </table>
        </xsl:for-each>
      </body>
    </html>
</xsl:template>
</xsl:stylesheet>

How to remove the prolog from XML in Oracle?

Our system works like this:
1. Pass in a piece of XML to the database as a CLOB
2. Database converts this to XMLTYPE (stored as a CLOB (you can skip over this, Marco *{;-) ))
3. An application then reads the XML from the database and inserts it into another bit of XML
4. The application continues its processing based on this new composite XML.
Up until now, the XML loaded into the database in step 1 (by various systems) has never contained a prolog. However, a new system has come along and is now passing in a prolog. This causes problems for the application in step 3.
Aside from trying to get the new system to not pass in the prolog, is there a way to remove it from within Oracle?
The two solutions I've come up with don't feel elegant:
1. Use XMLTABLE to extract the main root node (which could be different, depending on which system sent in the data, and could change)
2. Convert the prolog into a comment, using REPLACE, before converting the CLOB into an XMLTYPE.
If I was forced to use one of these methods, I'd go with 2, but I really, really hope there's a better way of doing it.
Has anyone got any other suggestions, please?
PS. We're currently on 10.2.0.4 and are shortly about to move to 11.2.0.3, but the solution has to work on both versions, for added fun and excitement!

This is the error the application gives: "Error obtaining Additional Info SAX Exception : No processing instruction starts with 'xml'" which the app dev says is due to the presence of the prolog in the middle of the xml the app has build up.So basically, the app just "pastes" the XML in the middle of another without caring about the structure? What kind of design is that?
IMO, the app has to be fixed, not the input XML.
Plenty about how to add the prolog, nothing about how to remove it!You can use XMLQuery function to extract the root element :
SQL> create table tmp_xml3 of xmltype
2 xmltype store as basicfile clob;
Table created
SQL> insert into tmp_xml3 values (xmltype('<?xml version="1.0" encoding="UTF-8"?><root/>'));
1 row inserted
SQL> select * from tmp_xml3;
SYS_NC_ROWINFO$
<?xml version="1.0" encoding="UTF-8"?><root/>
SQL>
SQL> select xmlquery('*' passing object_value returning content)
2 from tmp_xml3;
XMLQUERY('*'PASSINGOBJECT_VALU
<root/>
Edited by: odie_63 on 22 août 2012 15:26

How to remove an Element from XML by confirming Attribute of that element

Hi guys
I have an XML file where i have all users DB. Now i want to remove a user from that XML file. I want to check an user id attribute which is uniqe with existing users in XML file, if its the same user then delete this user from XML file and save the changes in XML file.
here is my XML file:
<?xml version="1.0" encoding="UTF-8"?>
<users>
<user id="zahid" password="X8UrUN79avT27LYwUESiliAV328=" name="Zahid Nawaz" phone="9599808" email="[email protected]" role="Tnr+vPuuAAsix8heVWD4mioCgLQ=" />
<user id="Admin" name="alpha beta" password="fEqNCco3Yq9h5ZUglD3CZJT4lBs=" phone="456782656" email="[email protected]" role="Tnr+vPuuAAsix8heVWD4mioCgLQ=" />
<user id="Guest" name="beta alpha" password="+ml3yZuAnbaOHFaIjsOL0ARxmzk=" phone="8765432" email="[email protected]" role="+s6D7jAUvcj5ggPMlOLokiJFLpA=" /><user id="Guest1" name="unknown unknown" password="+ml3yZuAnbaOHFaIjsOL0ARxmzk=" phone="123122112" email="[email protected]" role="+s6D7jAUvcj5ggPMlOLokiJFLpA=" />
</users>for example i want to delete a user which have user id= Guest.
How can i do it in Java. Any code example please. i am using JDOM document and SAXBuilder for parsing.
Waiting for your replay.
Thanks in Advance
Best regard

Hi,
Till now i tried the following code which give null pointer exception at following line
element.getParentNode().removeChild(element);
     public String removeUserByID(String id) throws Exception{
               DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
             DocumentBuilder builder = factory.newDocumentBuilder();
             TransformerFactory tFactory = TransformerFactory.newInstance();
             Transformer tFormer = tFactory.newTransformer();
               doc = builder.parse(usersXml);
             Element element = (Element)doc.getElementsByTagName("user id="+id).item(0);
//             Remove the node
             element.getParentNode().removeChild(element);
//             Normalize the DOM tree to combine all adjacent nodes
             doc.normalize();
             FileOutputStream fos = new FileOutputStream(this.usersXml);
               XMLOutputter out = new XMLOutputter();
               out.output(((org.jdom.Document)doc), fos);
          /*     Source source = new DOMSource(doc);
             Result dest = new StreamResult(System.out);
             tFormer.transform(source, dest);
             System.out.println();
             return "true";
          if following line i m trying to use first attribute of my XML file where i am passing a string which is for example like "user id=Guest". id is a string which have user Id "Guest".
Element element = (Element)doc.getElementsByTagName("user id="+id).item(0);So any suggestion??Whats wrong here?
Best regards and thanks again 4 ur reply.

How to remove empty lines from xml files after removing nodes from document

<pre>
Hi
<b>i have xml document, which is shown below
after removing some nodes from the document ,i am getting empty lines in place of removed nodes,how to resolve this and get the proper xml document without any errors</b>
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE Message SYSTEM "TRD01.dtd">
<Message>
<Header>
<CounterPartyType>CLIENT</CounterPartyType>
<CreationTime>20134455</CreationTime>
<ErrorCode>363 </ErrorCode>
<ErrorEnterPriseId>N</ErrorEnterPriseId>
<ErrorStatus>1</ErrorStatus>
<ErrorSystemId>STL</ErrorSystemId>
<ErrorTimes>31</ErrorTimes>
<MessageType>T</MessageType>
<RecipientEnterpriseId>N</RecipientEnterpriseId>
<RecipentSystemId>EXM</RecipentSystemId>
<Remarks>REMARSK</Remarks>
<SenderEnterpriseId>N</SenderEnterpriseId>
<SenderSystemId>TR</SenderSystemId>
</Header>
</Message>
<ErrorCode>363 </ErrorCode>
<ErrorEnterPriseId>NIHK</ErrorEnterPriseId>
<ErrorStatus>1</ErrorStatus>
<ErrorSystemId>STL</ErrorSystemId>
<ErrorTimes>31</ErrorTimes>
XPathExpression expression5 = xpath.compile(xmlpath5);
Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
Node node5 = (Node) result5;
node5.getParentNode().removeChild(node5);
XPathExpression expression6 = xpath.compile(xmlpath6);
Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
Node node6=(Node) result6;
node6.getParentNode().removeChild(node6);
XPathExpression expression7 = xpath.compile(xmlpath7);
Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
Node node7=(Node) result7;
node7.getParentNode().removeChild(node7);
doc.normalize();
doc.normalizeDocument();
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
t.setOutputProperty(OutputKeys.METHOD,"xml");
t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
the xml output i am getting is
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Message>
<Header>
<CounterPartyType>CLIENT</CounterPartyType>
<CreationTime>20134455</CreationTime>
<MessageType>TRD01</MessageType>
<RecipientEnterpriseId>N</RecipientEnterpriseId>
<RecipentSystemId>STL</RecipentSystemId>
<Remarks>REMARSK</Remarks>
<SenderEnterpriseId>N</SenderEnterpriseId>
<SenderSystemId>T</SenderSystemId>
</Header>
</Message>
<b>could you please let me know how to avoid empty lines in the xml doucment output</b>
this is the method i am using to get the result
public void ValidateRecord(String xml){
try{
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder db = factory.newDocumentBuilder();
//parse file into DOM
/*DOMParser parser = new DOMParser();
parser.setErrorStream(System.err);
parser.setValidationMode(DTD_validation);
parser.showWarnings(true);*/
System.out.println ("HI THIS xml is validation "+xml);
Resolver res = new Resolver();
db.setEntityResolver(res);
Document doc = db.parse(new InputSource(new StringReader(xml)));
XPathFactory xpf = XPathFactory.newInstance();
XPath xpath = xpf.newXPath();
// XPathExpression expression = xpath.compile("//A/B[C/E/text()=13]");
String xmlpath="/Message/Header/CounterPartyType/text()";
String xmlpath1="/Message/Header/RecipentSystemId/text()";
String xmlpath2="/Message/Header/ErrorSystemId/text()";
XPathExpression expression = xpath.compile(xmlpath);
XPathExpression expression1 = xpath.compile(xmlpath2);
Object result = expression.evaluate(doc, XPathConstants.NODE);
Object result1 = expression1.evaluate(doc, XPathConstants.NODE);
Node node = (Node) result;
Node node1 = (Node) result1;
System.out.println("the values of the string is " +node.getNodeValue());
System.out.println("the values of the string is " +node1.getNodeValue());
// for (int i = 0; i < nodes.getLength(); i++) {
//System.out.println(nodes.item(i).getNodeValue());
// CAHNGING THE RECEIPENT NODE
XPathExpression expression2 = xpath.compile(xmlpath1);
Object result2 = expression2.evaluate(doc, XPathConstants.NODE);
Node node2 = (Node) result2;
System.out.println(node2);
node2.setNodeValue(node1.getNodeValue());
System.out.println(node2);
//removing the nodes from document
String xmlpath3="/Message/Header/ErrorCode";
String xmlpath4="/Message/Header/ErrorEnterPriseId";
String xmlpath5="/Message/Header/ErrorStatus";
String xmlpath6="/Message/Header/ErrorSystemId";
String xmlpath7="/Message/Header/ErrorTimes";
XPathExpression expression3 = xpath.compile(xmlpath3);
Object result3 = expression3.evaluate(doc, XPathConstants.NODE);
Node node3 = (Node) result3;
node3.getParentNode().removeChild(node3);
XPathExpression expression4 = xpath.compile(xmlpath4);
Object result4 = expression4.evaluate(doc, XPathConstants.NODE);
Node node4 = (Node) result4;
System.out.println("node value");
System.out.println(node4.getParentNode().getNodeName());
node4.getParentNode().removeChild(node4);
XPathExpression expression5 = xpath.compile(xmlpath5);
Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
Node node5 = (Node) result5;
node5.getParentNode().removeChild(node5);
XPathExpression expression6 = xpath.compile(xmlpath6);
Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
Node node6=(Node) result6;
node6.getParentNode().removeChild(node6);
XPathExpression expression7 = xpath.compile(xmlpath7);
Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
Node node7=(Node) result7;
node7.getParentNode().removeChild(node7);
// Node b13Node = (Node) expression.evaluate(doc, XPathConstants.NODE);
//b13Node.getParentNode().removeChild(b13Node);
doc.normalize();
doc.normalizeDocument();
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
t.setOutputProperty(OutputKeys.METHOD,"xml");
t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
t.transform(new DOMSource(doc), new StreamResult(System.out));
catch (Exception e) {
e.printStackTrace();
System.out.println(e.getMessage());
</pre>
Edited by: user12185243 on Apr 6, 2013 6:38 AM
Edited by: user12185243 on Apr 6, 2013 6:41 AM
Edited by: user12185243 on Apr 6, 2013 6:43 AM
Edited by: user12185243 on Apr 6, 2013 6:45 AM
Edited by: user12185243 on Apr 6, 2013 9:00 AM

either this way we can do this
1)
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
<b> factory.setIgnoringElementContentWhitespace(true); </b>
DocumentBuilder db = factory.newDocumentBuilder();
or
2)
java.io.StringWriter sw = new java.io.StringWriter();
StreamResult sr = new StreamResult(sw);
t.transform(new DOMSource(doc), sr);
String xml1 = sw.toString().trim();
<b> xml1=xml1.replaceAll("\\s",""); </b>
System.out.println(xml1.trim());

How to remove empty space from a file

Hi all,
Can any one help on how to remove the blank spaces from a file.
I used trim function but unable to remove the spaces.
I have a file in which there is a name like 'JAIRAM' and am storing this file in a variable FILE_CONTENTS.
Now am unable to compare FILE_CONTENTS with another value as it is storing empty spaces also from the file.
Please help on this
Thanks,
Srini

Trim only trim at the beginning or at the end. Can you try using the replace sql function.. see below..
SQL> select replace('abc def',' ','') from dual ;
REPLAC
abcdef
cheers

How to remove white space between sliced images ? Please help.

I've created a site by exporting sliced images from Photoshop into Dreamweaver. Some images have a thin white line between them that I can't get rid of. I think it's because they are in a table format. There is no cell padding. Can you help me remove them? (see code below) The images I'm talking about are the horizontal buttons used in the navigation bar. Thank you in advance!
Here is a link to the site: Site Preview
--------------CODE---------------
<table width="1001" height="751" border="0" align="center" cellpadding="0" cellspacing="0" id="Table_01">
    <tr>
      <td colspan="17">
        <img src="../Images/Optimized-Header.gif" width="1002" height="188" alt="logo header"></td>
      <td>
        <img src="../images/spacer.gif" width="1" height="194" alt=""></td>
      </tr>
    <tr>
      <td rowspan="2">
        <img src="../images/white-space-top-left.gif" width="44" height="45" alt=""></td>
      <td colspan="16">
        <img src="../images/Creekside-Layout-Final_03.gif" width="956" height="1" alt=""></td>
      <td>
        <img src="../images/spacer.gif" width="1" height="1" alt=""></td>
      </tr>
    <tr>
      <td colspan="3"><a href="../creekside_homepage.html"><img src="../images/about-btn1.gif" width="157" height="44" alt="about"></a></td>
      <td colspan="3"><a href="../steam_and_sauna_page.html"><img src="../images/steam-and-sauna-btn2.gif" width="233" height="44" alt="steam and sauna"></a></td>
      <td colspan="3"><a href="../creekside_hot_tubs_page.html"><img src="../images/hot-tubs-btn3.gif" width="162" height="44" alt="hot tubs"></a></td>
      <td colspan="3"><a href="../creekside_rentals_page2.html"><img src="../images/rentnals-btn4.gif" width="151" height="44" alt="rentals"></a></td>
      <td colspan="3"><a href="../creekside_contact_page.html"><img src="../images/contact-us-btn.gif" width="211" height="44" alt="contact us"></a></td>
      <td>
        <img src="../images/white-space-top-right.gif" width="42" height="44" alt=""></td>
      <td>
        <img src="../images/spacer.gif" width="1" height="44" alt=""></td>
      </tr>
    <tr>

Your slices appear to be a little bit off.
Use Photoshop for images only. Use DW to build your web pages. Exporting HTML from graphics apps is not going to produce good cross-browser results. It's really only for quick prototypes; not real web sites.
See this 3 part tutorial:
Taking a Fireworks (or Photoshop) comp to a CSS Layout in DW
Part 1 - Initial Design
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Part 2 - Markup preparation
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
Part 3 - Layout and CSS
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

How to remove white spaces with GUI_Download FM

Hi Gurus,
I need to download my text file using GUI_DOWNLOAD FM without leading white spaces, can u pls advice me.
I am giving the code I am using below.
CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
BIN_FILESIZE                    =
        filename                        = l_filename
    filetype                        = 'ASC'
APPEND                          = ' '
     WRITE_FIELD_SEPARATOR           = 'X'
HEADER                          = '00'
     TRUNC_TRAILING_BLANKS           = 'X'
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
SHOW_TRANSFER_STATUS            = ABAP_TRUE
IMPORTING
FILELENGTH                      =
      TABLES
        data_tab                        = gt_temp
FIELDNAMES                      =
   EXCEPTIONS
     FILE_WRITE_ERROR                = 1
     NO_BATCH                        = 2
     GUI_REFUSE_FILETRANSFER         = 3
     INVALID_TYPE                    = 4
     NO_AUTHORITY                    = 5
     UNKNOWN_ERROR                   = 6
     HEADER_NOT_ALLOWED              = 7
     SEPARATOR_NOT_ALLOWED           = 8
     FILESIZE_NOT_ALLOWED            = 9
     HEADER_TOO_LONG                 = 10
     DP_ERROR_CREATE                 = 11
     DP_ERROR_SEND                   = 12
     DP_ERROR_WRITE                  = 13
     UNKNOWN_DP_ERROR                = 14
     ACCESS_DENIED                   = 15
     DP_OUT_OF_MEMORY                = 16
     DISK_FULL                       = 17
     DP_TIMEOUT                      = 18
     FILE_NOT_FOUND                  = 19
     DATAPROVIDER_EXCEPTION          = 20
     CONTROL_FLUSH_ERROR             = 21
     OTHERS                          = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

hi , try this,
REPORT ZMP_SALES_HEDER_DOWLNLOAD.
types:begin of ty_vbak,
      vbeln type vbeln,
      erdat type erdat,
      ernam type ernam,
      netwr type netwr_ak,
      vkorg type vkorg,
      kunnr type kunnr,
      end of ty_vbak.
data:it_vbak type table of ty_vbak,
     wa_vbak type ty_vbak.
select-options:s_vbeln for wa_vbak-vbeln.
start-of-selection.
select vbeln
        erdat
        ernam
        netwr
        vkorg
        kunnr from vbak
        into table it_vbak
        where vbeln in s_vbeln.
   CALL FUNCTION 'GUI_DOWNLOAD'
     EXPORTING
*      BIN_FILESIZE                    =
       FILENAME                        = 'C:/temp.XLS'
*      FILETYPE                        = 'ASC'
*      APPEND                          = ' '
      WRITE_FIELD_SEPARATOR           = 'X'
*      HEADER                          = '00'
*      TRUNC_TRAILING_BLANKS           = ' '
*      WRITE_LF                        = 'X'
*      COL_SELECT                      = ' '
*      COL_SELECT_MASK                 = ' '
*      DAT_MODE                        = ' '
*      CONFIRM_OVERWRITE               = ' '
*      NO_AUTH_CHECK                   = ' '
*      CODEPAGE                        = ' '
*      IGNORE_CERR                     = ABAP_TRUE
*      REPLACEMENT                     = '#'
*      WRITE_BOM                       = ' '
*      TRUNC_TRAILING_BLANKS_EOL       = 'X'
*      WK1_N_FORMAT                    = ' '
*      WK1_N_SIZE                      = ' '
*      WK1_T_FORMAT                    = ' '
*      WK1_T_SIZE                      = ' '
*    IMPORTING
*      FILELENGTH                      =
     TABLES
       DATA_TAB                        = IT_VBAK
*      FIELDNAMES                      =
*    EXCEPTIONS
*      FILE_WRITE_ERROR                = 1
*      NO_BATCH                        = 2
*      GUI_REFUSE_FILETRANSFER         = 3
*      INVALID_TYPE                    = 4
*      NO_AUTHORITY                    = 5
*      UNKNOWN_ERROR                   = 6
*      HEADER_NOT_ALLOWED              = 7
*      SEPARATOR_NOT_ALLOWED           = 8
*      FILESIZE_NOT_ALLOWED            = 9
*      HEADER_TOO_LONG                 = 10
*      DP_ERROR_CREATE                 = 11
*      DP_ERROR_SEND                   = 12
*      DP_ERROR_WRITE                  = 13
*      UNKNOWN_DP_ERROR                = 14
*      ACCESS_DENIED                   = 15
*      DP_OUT_OF_MEMORY                = 16
*      DISK_FULL                       = 17
*      DP_TIMEOUT                      = 18
*      FILE_NOT_FOUND                  = 19
*      DATAPROVIDER_EXCEPTION          = 20
*      CONTROL_FLUSH_ERROR             = 21
*      OTHERS                          = 22
   IF SY-SUBRC = 0.
   MESSAGE 'DATA ULOADED TO temp FILE' TYPE 'I'.
   ENDIF.

How to remove elements/attributes from XML using Xpath in XSLT ??

Hello ,
Is there anyway or method of Xpath from which I can delete the elements and attributes from XML at runtime ??
Like I have such XML and I have to remove per attribute highlighted below
<person per="and">
<e:emp a="ir" b="ad" >
</e:emp>
</person>
And want a result like this
<person>
<e:emp a="ir" b="ad" >
</e:emp>
</person>
Thanks

To achieve this you can use the bpelx:remove function: http://download.oracle.com/docs/cd/E12483_01/integrate.1013/b28981/manipdoc.htm#CIHJBJFD
your assign will look like:
<bpel:assign>
<bpelx:remove>
<target variable="person" query="/person/@per" />
</bpelx:remove>
</bpel:assign>
Regards,
Melvin

How to remove element namespaces in XML file using DOM or SAX?

Hi Guys,
I developed a JAVA mapping in XI to add name spaces for XML file, after mapping,name spaces xmlns="http://www.mro.com/mx/integration" and xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" were added correctly, but for some nodes, such as <Header> and <Content>, a name space xmlns="" was added automatically.Please check below files to compare.
It looks like be added automatically by XI. I didn't process anything for these nodes in JAVA program.
Now the issue is, how can I remove these redundant namespaces? Such as xmlns="".
Can I remove them using DOM or SAX in JAVA Mapping?
Thanks in advance.
====>Original XML file
<?xml version="1.0" encoding="UTF-8"?>
<LLYLPPInterface language="EN">
   <Header>
      <SenderID>GBIP</SenderID>
      <CreationDateTime>2008-02-13T22:49:34-05:00</CreationDateTime>
      <RecipientID/>
      <MessageID/>
   </Header>
   <Content>
      <LLY-LPP>
         <INVOICE>
            <INVOICELINE>
               <PONUM>4780000008</PONUM>
               <POLINENUM>1</POLINENUM>
               <INVOICEQTY>1</INVOICEQTY>
               <LOADEDCOST>68</LOADEDCOST>
            </INVOICELINE>
         </INVOICE>
      </LLY-LPP>
   </Content>
</LLYLPPInterface>
===>Target XML file after JAVA mapping
<?xml version="1.0" encoding="utf-8"?>
<LLYLPPInterface language="EN" xmlns="http://www.mro.com/mx/integration" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <Header xmlns="">
          <SenderID>GBIP</SenderID>
          <CreationDateTime>2008-02-13T23:11:55-05:00</CreationDateTime>
          <RecipientID/>
          <MessageID/>
     </Header>
     <Content xmlns="">
          <LLY-LPP>
               <INVOICE>
                    <INVOICELINE>
                         <PONUM>4780000008</PONUM>
                         <POLINENUM>0</POLINENUM>
                         <INVOICEQTY>1</INVOICEQTY>
                         <LOADEDCOST>68</LOADEDCOST>
                    </INVOICELINE>
               </INVOICE>
          </LLY-LPP>
     </Content>
</LLYLPPInterface>
Edited by: Eddie Zhang on Feb 14, 2008 9:22 AM
Edited by: Eddie Zhang on Feb 14, 2008 9:24 AM

Hi Milan,
Thanks for your replay.
Actually when I used module XMLAnonymizerBean to convert namespaces, the header of XML, such as <?xml version="1.0" encoding="UTF-8"?> was converted to format <?xml version='1.0' encoding='UTF-8'?>, quote was converted to single quote. Although I set parameter anonymizer.quote = ", it still didn't work, single quote appeared instead of quote.
I'm not sure why this happened. Can anyone help to clarify this?
Thanks
Edited by: Eddie Zhang on Feb 15, 2008 2:11 AM

How to remove HTML encoding from csv file using powershell

Hi guys i am exporting data from a sharepoint list using powershell which works fine. My problem is that some of the fields contain HTML mark up. Is there a way to remove all of the html mark up from the array before writing it to csv ?
I have tried playing about with System.Web.HttpUtility.HtmlDecode but with no luck the code runs but no html is removed.
Below is a sample of my script.
Set-Variable HOME $env:USERPROFILE -Force
(Get-PSProvider FileSystem).Home = $HOME
if(-not(Get-PSSnapin | where { $_.Name -eq "Microsoft.SharePoint.PowerShell"}))
Add-PSSnapin Microsoft.SharePoint.PowerShell;
# imports assembly needed for url stuff to do
Add-Type -AssemblyName System.Web
$SPWeb = Get-SPWeb "http://site url"
$SPList = $SPWeb.Lists["List Name"]
$exportlist = @()
$SPList.Items | foreach {
$obj = New-Object PSObject -Property @{
"Employee full name" = $_["EMPLOYEEFNAME"]
"Employee login name" = $_["EMPLOYEENAME"]
"Department Name" = $_["DEPARTMENT"]
System.Web.HttpUtility.HtmlDecode("OBJECTIVESTOBEACHIEVED_0") = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_0"]
"OBJECTIVESTOBEACHIEVED_1" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_1"]
"OBJECTIVESTOBEACHIEVED_2" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_2"]
"OBJECTIVESTOBEACHIEVED_3" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_3"]
"OBJECTIVESTOBEACHIEVED_4" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_4"]
"OBJECTIVESTOBEACHIEVED_5" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_5"]
"OBJECTIVESTOBEACHIEVED_6" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_6"]
"OBJECTIVESTOBEACHIEVED_7" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_7"]
$exportlist += $obj
$exportlist | select "Employee full name", "Employee login name", "Department Name", "OBJECTIVESTOBEACHIEVED_0", "OBJECTIVESTOBEACHIEVED_1", "OBJECTIVESTOBEACHIEVED_2", "OBJECTIVESTOBEACHIEVED_3", "OBJECTIVESTOBEACHIEVED_4", "OBJECTIVESTOBEACHIEVED_5", "OBJECTIVESTOBEACHIEVED_6", "OBJECTIVESTOBEACHIEVED_7" | Export-Csv ~/Export.csv -noType
$SPWeb.Dispose()
any help would be much appreciated.

Should have googled before posting !
"OBJECTIVESTOBEACHIEVED_0" = [Microsoft.SharePoint.Utilities.SPHttpUtility]::ConvertSimpleHtmlToText($_["F1_S4a_OBJECTIVESTOBEACHIEVED_0"],-1) -replace '\s+', ' '
Clears all the additional white space. As always jrv you
have saved the day, many thanks for all the help.
Mal

How to remove empty tags from XML

Hello,
I have a XML file which contains some empty tags and some values with "?". I need to remove all empty tags and tags which have a value "?".
Sample Data:
<a>
<b></b>
<c> Hello </c>
<d>world ?</d>
<e>oracle</e>
</a>
Expected result:
<a>
<c> Hello </c>
<e>oracle</e>
</a>
Thank you for your time.
Thanks,
Edited by: 850749 on Apr 7, 2011 6:25 PM

Dear Odie,
May I make your example a bit more complicated by adding an additional complexType, please:
---Original ----
<DEPT>
<EMPID>1</EMPID>
<EMPNAME>Martin Chadderton</EMPNAME>
<SALARY>??</SALARY>
<SALARYq></SALARYq>
</DEPT>
----- New ----
<DEPT>
<EMPID>1</EMPID>
<EMPNAME>Martin Chadderton</EMPNAME>
<SALARY>??</SALARY>
<SALARYq></SALARYq>
<EMPLMNT_HISTORY>
<DEVISION>1</DEVISION>
<FROM_DATE>2011-01-01 </FROM_DATE>
<TO_DATE></TO_DATE>
</EMPLMNT_HISTORY>
</DEPT>
Your solution works perfectly for <SALARY>, but how would you suggest also to deal with <TO_DATE> ?
Massive thanks for your help!
N.B. Just to emphasise, in my case I have 3 levels (complexType > complexType > complexType) and many elements and I would like to know if there is any generic option to say
to remove all the empty elements from the result, as it causes to the SSJ (Systinet) Webservice to crash.

How to remove white spaces from XML content using Coldfusion?

Similar Messages

Maybe you are looking for