How to report each command

Hi there
If successfully enable aaa with an acs
server to verify users within M$ AD Server.
Wich aaa config command do I have to set
if I would like to report all commands
a user from us puts on the commandline
on a switch???
thx

aaa accounting command 1 default group tacacs (Logs level 1 commands that user issues )
aaa accounting command 15 default group tacacs
(Logs level 1 to 15 commands that user issues in enable mode)
aaa config-commands (Logs commands user issues on config t mode)
Regards,
~JG
Do rate helpful posts

Similar Messages

How to save each section report into different excel sheet?

Hi all
How to save each section report into different excel sheet?
I have a report in which there are 4 sections north south west east now i need to save north in excel sheet 1 , south in sheet2, west in sheet3, and east in sheet4. under each section there is list report.
Please let me know is it possible are not if possible let me no the procedure to be followed.
Thank you

If you're running XI 3.1 you might be able to solve this as follows.
1. Create four users: east, west, north, south
2. Create a profile that filters on the variable you used for the section/break
3. Publish the report
3.1 Set users created above to be the enterprise recipients
3.2 Add personalization (the profile created above)
3.3 Check the Deliver objects to each user in Destinations
(3.4 You could use %SI_OWNER% to get a nice suffix to the report name)
This should cause four reports to be created, each with its own "personalized" contents.

How to run report on command line with user parameter?

Hi,
How do I run oracle report on command line (batch) with pre-set User Parameter values ? e.g. :P_1 ='SYSDATE' , :P_2 = 'DEPT_NO'
Thanks

Hello,
If you are using rwrun :
rwrun report=myreport destype=file desname=c:\temp\myreport.pdf desformat=pdf P_1='SYSDATE' P_2='DEPT_NO' userid=scott/tiger@dbalias
If you are using rwclient , just add server=<reports server name> :
rwclient server=myrepsevrername report=+myreport+ destype=file desname=c:\temp\myreport.pdf desformat=pdf P_1='SYSDATE' P_2='DEPT_NO' userid=scott/tiger@dbalias
Regards

How to run non-customised report from command prompt to gen trace file?

Hi
how to run non-customised report from command prompt to gen trace file?
EBS R12 RUP6.
RHEL5
rgrds

Hi,
See (Note: 285497.1 - Rwrun.sh Does Not Generate Trace Output Using TRACEOPTS in Command Line) and/or (Note: 737445.1 - R12 Concurrent Requests Run Forever; rwrun Errors REP-50125) for the command you need to use.
Thanks,
Hussein

How to print pdf file in SQL Server Reporting services report using command prompt?

Is there a way to automatically print a SQL Server Reporting services report on command prompt? For eg: We can save a pdf file using rs.exe utility. I want to print a pdf using rs.exe utility. Is it possible? I don't want to install any 3rd party software.

Thanks Simon for replying to my question.
In oracle form, there is oracle command to print the report from command prompt with the help of rwrun.exe
e.g: rwrun.exe REPORT="D:\Test\REP_25\MLA.REP" DESNAME="testprinter" DESTYPE="PRINTER" P_FORMNAME="MLA.FMX" P_SPRACHE="E" P_SPRACHE_NR2="1" P_WHERE_BEDINGUNG="order by land_nr" USERID="test/test.world" PSV_NAME="PSV_DEMO" PSV_JOB_ID="PS$9583" RECURSIVE_LOAD="NO"
BATCH="YES" NONBLOCKSQL="NO" ARRAYSIZE="1" PARAMFORM="NO" ERRFILE="c:\temp\psv16.tmp"<
and to save the report we just need to change DESNAME="c:\temp\OC_100001349.pdf" DESTYPE="FILE" in above command instead of DESNAME="testprinter" DESTYPE="PRINTER".
DESNAME and DESTYPE are the input parameters of the respective report.
In SSRS, we can run the file from the command prompt and save it.
rs -i "C:\Users\pujarswa\Documents\reports\new\LoadReport.rss" -s ww2004760:80/ReportServer_MSSQL -v fileName="C:\Users\pujarswa\Desktop\TipsReportLoad.pdf"
-v reportPath="/TipsReport/LoadListTabular" -t -v format="PDF" -v LandNr=4 -u ap\swati -p test@# -e Exec2005
But we cannot use same command for printing as you said we need to create another script for printing files.
I have gone through the links but I dont want to use Adobe Acrobat Reader exe for printing because client it may not have Adobe Acrobat Reader on their machine.
Also I want to pass a input parameter as type="Printer" to my report which will print directly for me and same I can acheive in command prompt passing type="Printer" fileName="C:\Users\pujarswa\Desktop\TipsReportLoad.pdf"

How to run a 10g report from command line ?

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to address an report server and run a report?
Thank you,
Dmitri

Steps to take.
(1.) In command prompt type RWSERVER SERVER=repserver1 to star the rep server.
(2.) If you get "Javaw.exe The procedure entry point psoasyn could not be located in the dynamic link library orapls10.dll." error do one of the following
        (a.) Type the full name for the server. D:\OracleDevR2\bin\rwserver SERVER=repserver1
               or, if it does not work
        (b.) Add D:\OracleDevR2\bin to the system env. variable PATH
(3.) Start OC4j
(4.) Now you can access the jobs using URL like:
    http://192.161.11.143:8890/reports/rwservlet/showjobs?server=repserver1
      where 192.161.11.143 is your machine's IP address.

Unable to run discoverer report from command prompt

Hi,
I'm trying to run the discoverer report from command prompt and i need to schedule the same.
How could i pass multiple values for the parameters?
If i don't pass the optional parameters, the parameter screen is getting pop-up? How to skip optional parameters?
Also, how to pass the data ranges (format for date parameters) ?
I'm using the below command in command prompt:
cd/d E:\oracle\BIToolsHome_1\bin
dis51usr /connect username/password@database /opendb "TIMS-PCJ status Report" /sheet "TIMS observation status report (based on performed date)" /parameter "Test Number" 40351 /parameter "From Date" "01-JAN-2007" /parameter "To Date" "28-FEB-2007" /parameter "Observation Status" C /parameter "Observation Name" "Abdominal Girth" /export HTML "C:\DISCOVERER_REPORT_SCHEDULING\DIS_OUTPUT\PCJStatusOutput11"
Any one please reply me. Its very urgent.
Regards,
Sreedhar

Hi,
How could i pass multiple values for the parameters? You should be able to use a comma separated list e.g.
/parameter "Observation Name" "'Abdominal Girth','Abdominal Girth2'"
How to skip optional parameters?I don't think you can. You have to supply all parameters and then decode out the parameters you don't need in the workbook.
how to pass the data ranges You cannot pass a date range. You can pass a start and end parameters. The default format for the date parameters is DD-MON-YYYY but this can change depending on the NLS settings and format of the data item.
Rod West

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

Crystal report SQL Command and using IN

Post Author: geozuh
CA Forum: Crystal Reports
Does any one know how to get a multiple value prompts to work in Crystal report SQL Commands? I have an extremely large database and do not want to pull back all the records to the report. I know I can do the filtering in the report, but due to the size of the database, I am restricked from doing do.
I would like to set the State as a multiple value parameter/prompt to be used in the SQL Command.
Ex.
Select CustID, FirstName, LastName
from Customer
where State in ('WI', 'IL', 'MN') --this would be turned into a parameter

Post Author: yangster
CA Forum: Crystal Reports
you are over thinking the problemsimply create a parameter within crystal for your state and change it to allow multiple valuesthen in the select expert put in state = ?stateif you do show sql query you will see that the values are pushed down to the sql level thus no performance hit vs putting the parameter directly in the command itself

How to execute unix command in plsql block( urgent)

Hi All,
i want rename the unix folder to New name on update non_employee table . So, please give me idea how to use unix command here.... Please suggest me ASAP ... Its urgent
CREATE or REPLACE TRIGGER NON_EMPLOYEE_AftUpd_trg
AFTER UPDATE ON NON_EMPLOYEE
FOR EACH ROW
BEGIN
IF :new.DIST_LIVELINK_PATH <> :old.DIST_LIVELINK_PATH THEN
rename unixfolder1 to :new.dist_livelink_path.
end IF;
END;

The solution will depend a lot on your Oracle version, which you forgot to mention ;)
btw shouldn't that be (in pseudocode)
rename :old.dist_livelink_path to :new.dist_livelink_pathotherwise it will always fail after the first time?
In Unix that would require the mv command.

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

Run the report through command prompt on Linux

can anyone tell me how can run report through command prompt (Reort server is on Linux)?
that thing I want to implement in form calling report.
Please guide about it..

hi,
There is a lots of documents available in the Internet for the same.
Regards,
Soumyajit

Passing user defined parameters in oracle reports thru command line

Hi All
We are currently using Reports 6i with Oracle 10g 10.2.0.4.0
I would like to know that is it possible to pass user defined parameters values while calling report from command line.
For Example: I am using following coding to call report from command line.
for /f "tokens=1-3 delims=/ " %%a in ('date /t mm/dd/yyyy -1') do (
set mm=%%b
set dd=%%a
set yyyy=%%c)
rwrun60 report=c:\reports\banks.rdf userid=express/test@test_rs2 destype=FILE desname=c:\reports\banks%dd%%mm%%yyyy%.pdf desformat=PDF BACKGROUND=NO BATCH=YES
The report contains some user defined parameter which is using in where condition of reqport query.
Select * from banks
where id = :Bank_ID
Now I want to Pass value for :Bank_Id from command line (like we pass parameter list while calling report with run_product), how it is possible?
Thanks
Hassan

Hi guys
Fortunately I am able to perform the required task as I just added the report parameter field as follows:
rwrun60 report=c:\reports\banks.rdf userid=express/test@test_rs2 destype=FILE desname=c:\reports\banks%dd%%mm%%yyyy%%h%%mi%%ss%%ts%.pdf desformat=PDF BACKGROUND=NO BATCH=YES ERRFILE=c:\reports\error.log LOGFILE=c:\reports\joblog.log bank_id='MCB'
bank_id is the report parameter using in where clause.
Regards,
Hassan

How to report database performance to upper management?

Hello all.
I am looking for a way to report database performance to upper management. I'll start by giving you an overview of our team structure. I manage a team of various roles: Level 2 support specialists, configuration managers, and DBAs - we are dubbed the
"Production Support Team". I report directly to the VP of Software Development who oversees the Design, DEV, and QA, team managers. This means that our team, Production Support, can be considered a peer team of Design, DEV, and QA.
The manager of each team compiles metrics from their team members and reviews them on a weekly basis to ensure we are headed in the right direction. We then take our metrics, and distill them down into a few key metrics that we then report to the VP
of Software Development. Those metrics are easy tom compile for the L2 support roles (number of tickets escalated, number closed, etc.). However, I've been struggling with how to report DBA performance for a long time. Every time I start
to compile numbers, I end up with tons of things that are great for a DBA, but don't mean much to upper management. Does anyone have any suggestions. Surely I'm not the only person that has had this issue?
I'd be happy to provide more info if needed. Thanks!
Clint

are you using an RTF template ?
in the RTF template you need to use this syntax for the HTML enabled field
<?html2fo:MOSC_COMMENTS?>
instead of <?MOSC_COMMENTS?>

Scheduling BOXI 3 Deski reports through Command Line

Can we schedule BO XI 3 Deski reports through Command Line.?
How can we do this?
Need help Plzzzzzzz!!!!!

Hi
you can use the BOE SDK to write a java or .NET program that does this. You can find some examples here:
http://www.sdn.sap.com/irj/boc/index?rid=/webcontent/uuid/a09374f5-a982-2b10-0297-85c67690b4f2 [original link is broken]
Regards,
Stratos

How to report each command

Similar Messages

Maybe you are looking for