How to restrict user to get values only from F4 in selection screen

Hi All,
We have given a Search hlep for a parameter in selection screen of a report,but now we are facing a issue, whlile executing the report user entering the data directly into field instead of selecting from F4 help.
Do anyone know how to restric the user from entering the data directly.
i have searched the fourm ,but not get any good tread.
Regards
CB
Moderator Message: Search harder, because there are many threads that have discussed the same issue before.
Edited by: kishan P on Dec 27, 2010 4:00 PM

You cna check my reply here To enter the value by selecting values from the F4 help only.

Similar Messages

How to restrict users in separate OU's from seeing each others presence

We have an Enterprise Lync 2010 server environment in place, and are using msRTCSIP-GroupingID to restrict address book lookups. We are now looking to restrict presence viewing to only user within the same OU. In other words it should not be possible
to see the presence of a user outside of your own OU, unless that user allows it explicitly.
It seems that the Multitenant pack for Lync can arrange that, but it's just not feasible to install that when you already have an active Lync environment in production. Is it possible to achieve this separation another way? Maybe with msRTCSIP-TenantId?
(which is already available in our current schema)

Hi,
Using the GroupingID will completely separate the users into unique address books. But searching by SIP URI will always work and you cannot prevent the users from communicating with other Lync users in the same organization. If you want
to restrict presence viewing to specific users, you can try ABS Configuration Tool.
http://www.justin-morris.net/how-to-hide-users-from-the-lync-address-book/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found
there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

How to add user defined functions in Menu bar of a Selection Screen?

Hi,
Can anybody please suggest me that how can I add user defined functions in the menu bar of a Selection Screen?
Regards
s@k

Dear Amit,
I am referring to the standard SAP program: RIEQUI20.
On the initial screen, there are 3 tabs.
Code:
SELECTION-SCREEN BEGIN OF TABBED BLOCK tab FOR 25 LINES.
SELECTION-SCREEN TAB (20) tab1 USER-COMMAND ucomm1
                     DEFAULT SCREEN 001.
SELECTION-SCREEN TAB (20) tab2 USER-COMMAND ucomm2
                     DEFAULT SCREEN 002.
SELECTION-SCREEN TAB (20) tab3 USER-COMMAND ucomm2
                     DEFAULT SCREEN 003.
SELECTION-SCREEN END OF BLOCK tab.
AT SELECTION-SCREEN.
CLEAR gv_okcode.
gv_okcode = sy-ucomm.
CLEAR sy-ucomm.
CASE gv_okcode.
    WHEN 'IH08'.
      CALL TRANSACTION 'IH08'. "Equipment Selection
    WHEN 'IW29'.
      CALL TRANSACTION 'IW29'. "Notification Selection
    WHEN 'IW39'.
      CALL TRANSACTION 'IW39'. "Order List Selection
    WHEN OTHERS.
ENDCASE.
*   Check date:
IF NOT datuv IS INITIAL
AND NOT datub IS INITIAL.
    IF datub >= datuv.
    ELSE.
      MESSAGE e884(ih) WITH datuv datub.
    ENDIF.
ENDIF.
IF variant IS INITIAL AND
     dy_vari IS INITIAL.
    PERFORM get_default_variant_f14 USING variant.
ENDIF.
PERFORM variant_existence_f14 USING variant.
IF datuv IS INITIAL.
    datuv = sy-datum.
ENDIF.
IF datub IS INITIAL.
    datub = sy-datum.
ENDIF.
IF sy-ucomm = 'ADDR'.
    PERFORM adress_sel_f01 USING 'EQUIR'.
ENDIF.
PERFORM check_parnr_f76.
* AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
STATICS: l_slset TYPE sy-slset.
*--- Set initial variant
PERFORM variant_init_f14 USING 'INST' 'INST' 'INST' 'RIEQUI20'.
IF variant IS INITIAL AND
     dy_vari IS INITIAL AND
    gv_variant_flag IS INITIAL.
    PERFORM get_default_variant_f14 USING variant.
    gv_variant_flag = 'X'.
ENDIF.
*--- Set Icon for adress-button
PERFORM set_icon_f01 USING dy_adrfl ad_icon text-ad0 text-ad1.
*--- get classification data from select option
*--- (if new variant or if called via submit or F3)
IF ( l_slset NE sy-slset ) OR
     ( s_comw[] IS NOT INITIAL AND gt_clsd_comw[] IS INITIAL ).
    l_slset = sy-slset.
    gv_class_old = dy_class.
    gv_klart_old = dy_klart.
    PERFORM copy_selopt_comw_f79 TABLES gt_clsd_comw s_comw.
    PERFORM class_search_init_f77 USING 'EQUI'.
ENDIF.
*--- set Icon for classification
LOOP AT gt_clsd_comw TRANSPORTING NO FIELDS
                      WHERE atcod > '0'.
    EXIT.
ENDLOOP.
IF sy-subrc IS INITIAL.
    gv_comw_flag = 'X'.
ELSE.
    CLEAR gv_comw_flag.
ENDIF.
PERFORM set_icon_f01 USING gv_comw_flag cl_icon text-cl0 text-cl1.
CALL METHOD cl_uid_cust=>selection_screen_output.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR variant.
PERFORM variant_inputhelp_f14 USING variant 'RIEQUI20'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR dy_parnr.
PERFORM f4_for_parnr_f76.
AT SELECTION-SCREEN ON BLOCK clse.
IF dy_class NE gv_class_old
    OR dy_klart NE gv_klart_old.
    gv_class_old = dy_class.
    gv_klart_old = dy_klart.
    CLEAR gv_comw_flag.
    REFRESH gt_clsd_comw.
    REFRESH s_comw.
ENDIF.
PERFORM class_exist_f77 USING dy_klart dy_class 'DY_CLASS'.
IF sy-ucomm = 'COMW'.
    CALL FUNCTION 'IHCLSD_VALUATION_POPUP'
      EXPORTING
        i_klart               = dy_klart
        i_class               = dy_class
        i_language            = sy-langu
        i_key_date            = sy-datum
        i_also_subclasses     = dy_subcl
      TABLES
        ct_comw               = gt_clsd_comw
      EXCEPTIONS
        exc_no_class          = 1
        exc_klart_not_allowed = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
*--- fill classification data in select option
    PERFORM copy_comw_selopt_f79 TABLES gt_clsd_comw s_comw.
ENDIF.
IF sy-ucomm = 'ONLI'.
    sscrfields-ucomm = sy-ucomm.
ENDIF.
Regards
s@k
Edited by: siemens.a.k on Jan 15, 2010 10:10 AM

How To Restrict Users To Only Create Purchase Requisitions with Item Catalog?

Hi, everyone
Please help me,
How To Restrict Users To Only Create Purchase Requisitions with Item Catalog? is it possible?
Regards, Manuel

Hi Steenie Norman
First click on the text item ---> Tools ---> Property Pallete ---->
and change the Keyboard State to Local Only also this Depend in your OS
hope this useful ....
Regards
Mohammed

How to restrict user to must enter value in compulsory fields

Greetings !
I had a personal information form. I want to restrict user to enter values in all fields e.g Compulsory fields (Username, D.O.B etc)
how i restrict user to must enter value in Compulsory fields

I created an example on apex.oracle.com
http://apex.oracle.com/pls/apex/f?p=18686:1:0:::::
like you see a red staric placed on ID it means it is complusory to enter because it is a primary key, i want this on every field or to restrict user to enter all data , if any field left blank it will give error "to Fill respective field ", but not on creation but on left blank (if user type ID e.g 12 and skip ename field and go on Job field it gives error to fill Ename first)

How to Restrict users to change password

Hi All,
I would like to restrict user to change password only defined number of times in a day, Is it possible to do it through group policies.
Please note i am already aware of "Minimum Password age" feature, however i do not want to use it as the minimum value that i can set here is 1 day. I would like to restrict users based on password reset threshold e.g. User can reset his password
in a day only twice or thrice.
Thanx & Regards,
Wasim Parkar

If you want to limit the user to have his/her password changed for a specific number of time every day, I have to say
NO thats not possible. PSO's as other mentioned,can be used to have different password policies. Maybe you can set the msDS-MinimumPasswordAge
to 00:04:00:00 which is equal to 4 hours. It means every 4 hours a user will be able to change his/her password. So in each day a user can change the password 6 times, since a day is 24 hours.
Do not forget a day start from 00:00 AM up to 11:59 PM. So in a 9 to 5 job, a user may change the password 2-3 times.
Hope it helps.
Mahdi Tehrani Loves Powershell
Please kindly click on Propose As Answer or to mark this post as
and helpfull to other poeple.

How to restrict user access in Oracle Application Server 10g (9.0.4)?

Can anybody please let me know how to restrict user access in 10g AS? To be specific, how to allow http requests from specific IPs only?

Hi,
You have to edit httpd.conf and modify acces rights for each protected directory
e.g.
<Directory /var/www/sub/payroll/>
Order allow,deny
Allow from 192.168.1.0/24
</Directory>
then you have to restart Oracle HTTP Server
jm--

How to restrict user at selection screen while executing in background mode

hi all,
how to restrict user at selection screen while executing in background mode
Regards
Deepak

Hi,
We can get the Program whether this is running in background or not then we need to use SY-BATCH, if the SY-BATCH is set to X then the program is running in Background,
so in the INITIALIZATION event, you can use this SY-BATCH and check the User names, and give the error messsage which you want to restrict
Regards
Sudheer

Seeburger Workbench access - restrict users to Message Monitor only

Hi All
Does anyone know if it's possible to restrict users to Message Monitor only access in the Seeburger Workbench?

Hi Andy,
if by "restrict" you mean if you can change the links available in the workbench, then sadly no - this is currently not possible. If you're ok with getting a HTTP Forbidden when clicking on other links than the Message Monitor, then yes - this can be configured within the SAP NetWeaver Administrator -> Identity Management. Check for example to documentation of the Message Monitor
Extracted from there:
    Log on to the NetWeaver Administrator (NWA).
    Open Operation Management | Users and Access | Identity Managemet (UME).
    Create a role and assign the manage action for com.seeburger.xi.frontend.messageidmonitor to that role.
    Now you can assign the newly created role to any user you want to grant access to the SEEBURGER Message ID Monitor.
This is for explicitly granting some user the access to the Message Monitor. The manage action is per default set to "Everyone". You need to remove Everyone on the corresponding frontends (search for actions with name com.seeburger.xi.frontend*)
Hope that helps
Greetings
-Sascha-

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How to restrict user to change original file in word document.

Hi experts,
I am begineer in DMS. I am not able to understand how to restrict user to make any changes to a word document attached any DIR or any object link.
Ex: I have a created a DIR attaching a word doc to equipment master.
However, the user is still able to make changes to that word document usign CV03 tcode. I am sure most of you might have faced this problem. Please respond.
We are using SAP 3.1i version. It is very old version.
Thanks in advance,
Kiran

Kiran,
The task that you have mentioned could be accomplished by setting up a status network for your document type. While setting up the status network, SAP has defined statuses which could potentially lock objects and fields corresponding to that status type.
More information could be found at
http://help.sap.com/erp2005_ehp_03/helpdata/EN/9f/857f3a1c7b11d294d200a0c92f024a/frameset.htm
I am not aware of 3.0i but you can navigate to customisation --> Cross Application Components --> Document Management --> Control Data --> Define Document Types --> Click on a doc type and go to
define doc status.
Here if you define a document with status type S the object is essentially locked for editing.
Sojan

!!!How to restrict user for making changes in Sales order , partner level

Hi all,
Can anybody tell me how to restrict user for making changes in Sales order at partner level, is it through user exit?

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

Please, help!!!!! How can i delete Angry birds not only from my device (iPhone 4), but from my iTunes account,too? I am a new user.

I am a new user of iPhone 4. I have problems with "Angry birds". I heard that i can fix the problem by deleting the application. So, the question is : How can i delete the game not only from my device, but from my iTunes account,too? Please, help!!!

You can just tap and hold any icon to put into Edit mode. There you can delete.
Or you can just tell iTunes not to sync it.
To remove from iTunes just click on it in list and press delete.

How to restrict user to change status.

Dear All,
we want to restrict users to change the status from set to assign to released status.
is there any authorization object to restirct user to change status?
i was trying with object CPRO_DPO Create Project Definition with activity 43 release ,but unable to do so.
Please do need ful
Regards
Ravindra

Hi Ravi,
probably you need to create user status profile.
Use TA BS02 to create status profile
here you have to add authorization key which needs to be defined in BS52
use b_user_stat auth object to give profiles in custom roles in PFCG
Thus you can block access to change status
Niranjan
Let me know if it helps
Points welcome
Thanks Mathias
Edited by: Niranjan Dandekar on Apr 2, 2009 1:21 PM
Edited by: Niranjan Dandekar on Apr 2, 2009 1:21 PM

Restrict variable values in the pop-up selection screen

Hi,
I have a variable based on a caracteristic that has 0COMP_CODE as attribute in a Web Report (BW 3.1B).
This variable has to be accessible so that users can select a value.
I need to restrict the values that users can see on the selection screen according to their 0COMP_CODE value, even in the pop-up.
I have tryed authorization variable and user exit, but none worked.
The best I could do was a "several single values" variable that was preselected with the caracteristics of their 0COMP_CODE, but it didn't worked in the pop-up.
Does anybody knows how to handle this?

As far as I could find out, it should be made through customer exit.
The point is : I have to use a customer exit variable that has been check as "ready for input".
I can't find a way to restrict the values displayed in the variable selection screen (in the help pop-up window for this variable).
The exit can pre-fill the selection fields with values, but whenever the user opens the window, he sees all the values.
I have tryed all the values for I_STEP (0,1,2 and 3) but none did it.
Does anybody knows how to limit those values?

How to restrict user to get values only from F4 in selection screen

Similar Messages

Maybe you are looking for