How to resolve the z table activation error?

I have a Z table.
Added a couple of fields and activated it. it was fine.
then changed one of the fields as a key field and activated it.
it took a long time even though there is no data and terminated.
I removed the key indicator and tried activating it. it showed errors.
Then I deleted it using SE14 and recreated with the same name. Now I am getting the following error:
         See log E4911620080227134551:ACT                                                                               
TABL ZPRICECONDN was not activated                                                     
      Check table ZPRICECONDN (E49116/02/27/08/13:45)                                        
      Enhancement category for table missing                                                    
/     Table ZZPRICECONDN: Key length > 120 (Restricted functionality)                         
      A table called ZPRICECONDN exists in the database                                      
/     No active nametab exists for ZPRICECONDN                                               
      Termination due to inconsistencies                                                        
/     Table ZPRICECONDN (Statements could not be generated)                                  
/     Error number in DD_DECIDE (9)                                                             
/     Check on table ZPRICECONDN resulted in errors                                          
How to resolve this?
Do I have to do any database manipulations?
I looked at 306296 but DROP command is not available in ABAP?
Pl advise.
Thanks
Ven

Hi,
  Whenever you make some changes to the database table, you need to activate it through the
database utility function (SE14).
Enhancement category for table missing: 
  to resolve this: SE11>>Table name>> Extras>>Enhancement category...and choose the option 'can be enhanced'.
/ Table ZZPRICECONDN: Key length > 120 (Restricted functionality)
   Reduce your key fields length to <120.
After doing those changes activate it through the database utility.
I hope, it will work for you.
Regards,
Jallu

Similar Messages

  • How to resolve the serial communicat​ion error in HP34970?

    I want to use serial port to commnucation between pc and hb34970. In gpib mode, it is ok. But in serial mode, report error. just like this:
    for setting com2: 
    16:11:47.359 2009-8-26 [Init_dq_Device]error:-1073807339--HP34970A Initialize.vi->Init_DQ_Device.vi->main_app.vi VISA read.visa name:ASRL2::INSTR
    for setting com1:
    16:13:25.921 2009-8-26 [Init_dq_Device]error:-1073807339--HP34970A Initialize.vi->Init_DQ_Device.vi->main_app.vi VISA read.visa name:ASRL1::INSTR
    I don't know the meaning of -1073807339 and whether i should set:ASRL1::INSTR for com1. Anyone can help me about this problem.
    Thanks very much.
    attach my subvi.
    Solved!
    Go to Solution.
    Attachments:
    Init_DQ_Device.vi ‏48 KB

    Hi, Dennis Knutson
    very glad to see you.
    For my vi, i only provide a UI for user to select GPIB or serial mode, and setting related port.
    About "Also, the 34970 llb you are using should be replaced with the 8.x project library.", What do you
    mean? There is a new driver for 34970,right?
    I search the forum and find a old thread:Agilent 34970 Visa Timeout.
    There is your answer:
    I made a mistake. The initialize function already had a timeout function. I just didn't look at the VI closely enough. There is a case statement that sets either the serial port parameters or just sets the VISA timeout. If you are setting the timout right after the VISA Open, it's just getting set back to 10 seconds. Change it in the case statement and see if that works. Sorry, and I hope this works.
    Do you think this is the same with my problem? Your mean to modify default 10 seconds to more longer timeout,right? 
    Thanks.

  • How to resolve "the connection was reset"error?

    ''Question duplicated; please continue at [/questions/1056868]''
    i was trying to load www.facebook.com and this is the error i get
    The connection was reset
    The connection to the server was reset while the page was loading.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    thanks

    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • I have started to get this error message: 5.1.3 bad address syntax in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice?

    I have started to get this error message: "5.1.3 bad address syntax" in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice?  My email account is through Optimum online and I am using Airpost Express.
    P.S. The error sound "bong" is driving us nuts!

    Please post on the Office for Mac product forums that Microsoft hosts. It's their product and they can best troubleshoot the issue.

  • How to resolve the problem in jdeveloper903 oc4j starting:JspTagLib listener error

    I just download a jdeveloper903,i hava a problem:
    when i start the oc4j alone,it prompt "JspTagLib listener error:null". Then,After depoly the jsp application with JspTag to oc4j,I found the jsp page can not run,but,the jsp application can run in the
    develope environment.
    how can resolve the problem,help!!Thanks.

    I think you might have better luck asking your question in the JDeveloper forum at:
    http://forums.oracle.com/forums/forum.jsp?id=315684
    later -- Jeff

  • TS3694 how can i resolve the issue of this error 1015?

    how can i resolve the issue of this error 1015?

    Google it. You can not get help for your jailbroken phone here.

  • How to Resolve the Broken Dc's on CBS.

    Hello all,
    I am facing few broken Dc's in CBS. I tried to resolve the broken DC's by the following procedures, but was not able to completely resolve the broken DC's on CBS. few procedures are
    1. No built and Deploy errors in NWDI
    2.Had released all the activities from transport, no more activity's are in pending state in TSK.
    But I am facing broken DC's in compile state, Metadata and Used Dc's. Can any of you suggest me how to resolve the broken DC's on CBS.
    Thanks you all,
    Anil

    Hi Anil,
    first of all please notice that I've moved this thread to the NWDI forum.
    See the guide:
    Understanding Broken DCs and Dirty DCs
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30b7c94e-fc6b-2910-30b8-d34a7b51309e
    You find some other useful documents in the top-most thread of this page in NWDI forum (SAP NetWeaver Development Infrastructure (NWDI))
    Direct link to the thread:
    Most important NWDI related guides and documents
    The specified item was not found.
    Best Regards,
    Ervin

  • How to create the custom table?

    Hi, how to create the custom table and how to integrate the table with defferent R/3?
    my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
    Tks
    DPk

    how to create the custom table
    There are two approach in creating a table.
    1. Bottom-up approach
    2. Top-down approach.
    Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
    1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
    2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
    3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
    4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
    5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
    6. Go to data element page and save, check and activate.
    7. Go to main table page and save, check, and activate.
    8. Also, you have to save the technical settings of the table.
    The table is now ready for operation. You can use it in your program or you can use it to enter information.
    Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
    It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
    SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
    how to integrate the table with defferent R/3
    Transport the Table to the another server/client/qas/prd
    Kanagaraja L

  • How to get the list of active devices in current wifi network?

    Hi All,
    I am going to a start a new Network based app. So please any one give me an idea on the below question.
    How to get the list of active devices in current wifi network?

    Nope I want the log-in user to retrieve its Group where he is belong. I have this following code
    strUsername = Request.getParameter("username").toLowerCase().trim()+"@dev.test.com.ph";
    strPassword = Request.getParameter("password").toLowerCase().trim();
    Hashtable env = new Hashtable();
    env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
    env.put(Context.PROVIDER_URL, MY_HOST);
    env.put(Context.SECURITY_AUTHENTICATION, "simple");
    env.put(Context.SECURITY_PRINCIPAL,strUsername);
    env.put(Context.SECURITY_CREDENTIALS, strPassword);
    // enable tracing
    env.put("com.sun.naming.ldap.trace.ber", System.err);
    // Create the initial context
    DirContext initCtx = new InitialDirContext(env);
    // Get the target context
    DirContext targetCtx = (DirContext)initCtx.lookup("");
    SearchControls constraints = new SearchControls();
    constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
    // Perform the search on the target context
    NamingEnumeration enum = targetCtx.search("","(userPrincipalName="+strUsername+")",constraints);
    javax.naming.directory.Attributes attrs;
    NameClassPair item;
    String[] attrIds = new String[]{"MemberOf"};
    // For each answer found, get its "Groups" attribute
    // If relative, resolve it relative to the target context
    // If not relative, resolve it relative to the initial context
    while (enum.hasMore()) {
    item = (NameClassPair)enum.next();
    Out.println(item);
    attrs = targetCtx.getAttributes(item.getName(), attrIds);
    Out.println(attrs + "<br>");
         initCtx.close();
    It returns all this string :
    {memberof=memberOf: CN=CMCanadaRD,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=iMngrCanadaRW,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=Domain Users,CN=Users,DC=dev,DC=test,DC=com,DC=ph, CN=Backup Operators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph, CN=Administrators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph}
    How can i retrieve the Group named CMCanadaRW and CMCanadaRD on the Attribute?
    Thanks

  • How to stop the bridge.exe active as to install the new application eg.Flash CC?

    how to stop the bridge.exe active as to install the new application eg.Flash CC? please help?
    I can't install the any new application every time.

    Please refer:
    http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html
    Regards,
    Ashutosh

  • How to resolve the loop in universe level

    how to resolve the loop in universe level

    Hi, Kashim
              In univese level loops resolved by Chasm Trap and Fan Trap methods.
    Chasm Trap:  A chasm trap is a type of join path between three tables when two many-to-one joins converge on single table, and there is no context in place that separate the converging join paths.
    There is "many-to-one-to-many"relationship beween the three tables in the universe structure.you can define a context for each table at the many end of the joins.
    A chasm trap is not dependent on the object types, the query could be made up of only dimensions,only details,or only measures,or any combination of the three types with the "many " tables for chasm to occure.
    you can also detect the chasm trap Automatically, tool---->Detect context
    To resolve the chasm trap, you need to make two separate Queries and than combine the results Depending on type of objects defined for the fact tables and the type of end user environment,
    Fan trap: it is occured when there is a "one-to-many" join to the table that "fans out " into another "one-to-many" join to another table.
    Avoid fan trap: The first place by relating all measure objects in the universe to the same table in the universe structure,Avoid placing a measure on anything other than the last table in a in a table path, which is the table with the "many" cardinality attached to it.
    This methods is not recomended as it only works for measure objects and may result in inefficienies in processing the query. This resolution works the same for chasm and fan traps.
    you can create more alias tables based on your requirement in single universe. and it is true conext, when two or more paths.
    Theese methods also apply for resolving loops:
    Short cut join also one method for resolving loops
    Aggregate aware function used another waty for resolving loops
    if you are not resolving the loop result is  redusing the number of records.

  • How to resolve After Effects CC 2014 error:

    how to resolve After Effects CC 2014 error: Could not create the file '/Users/User/Library/Preferences/Adobe/After Effects/13.0/dummy'.
    Every time I try launch any of my CC programs, i keep getting this error message, has anyone come across this before?
    I tried uninstalling and but still got the same error after the reinstalling

    fixing permissions problem that impedes start of Adobe applications

  • TS1702 Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

    Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

    Maybe here:
    IOS 6 App store crash: Apple Support Communities

  • How to resolve Unexpected End of file error in Web Crawling

    how to resolve Unexpected End of file error in Web Crawling....
    I am getting java.net.SocketException :Unexpected End of file error in Web Crawling.
    How to get rid of this error.
    Please help anybody ASAP.

    1. Handle this exception - not recommended since you will be creating an exception handling overhead unnecessarily.
    2. Check for EOF using available() method in InputStream. It returns 0 if there are no bytes to read.

  • How to fix the .pdf file with error "invalid annotation object"

    how to fix the .pdf file with error "invalid annotation object"

    As long as the PDF opens, then just try saving it to a new file name. There may be a preflight script that would help troubleshoot the issue.

Maybe you are looking for