How to restart UCCX Server 8.0.2 SU4
We have a HA UCCX cluster and I need restart the primary and backup. Does anyone know where to go in the UCCX web interface to restart each of these or does it have to be done through the cli?
Hi,
For restarting the engine or any specific subsystem through web interface, please navigate to Cisco Unified CCX Serviceability->Tools ->Network services->Cisco Unified CCX Engine->Susystem Manager
For restarting the enitre UCCX server, Login into your UCCX cli, type the command utils system restart
First restart the Publisher (node1) and after it comes up restart the Subscriber (second node).
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851cli.pdf
Hope it helps.
Anand
Pls rate helpful posts !!
Similar Messages
-
How to restart password server?? Urgent!
Hi
Suddenly OD is showing up with Password server stopped - and nobody can log in or do anything related to passwords!
How do I restart the password server? Here's the log:
-12-15 09:21:20 CET - T[0xB0207000] - Plugin <BSD>, Version <2.0>, processed successfully.
2008-12-15 09:21:20 CET - T[0xB038D000] - Registered node /Configure
2008-12-15 09:21:20 CET - T[0xB038D000] - Plug-in Configure state is now active.
2008-12-15 09:21:20 CET - T[0xB0491000] - Plug-in LDAPv3 state is now active.
2008-12-15 09:21:20 CET - T[0xB0595000] - Registered Locally Hosted Node /BSD/local
2008-12-15 09:21:20 CET - T[0xB0595000] - Registered node /BSD/local
2008-12-15 09:21:20 CET - T[0xB0595000] - Plug-in BSD state is now active.
2008-12-15 09:21:20 CET - T[0xB040F000] - Registered Locally Hosted Node /Local/Default
2008-12-15 09:21:20 CET - T[0xB040F000] - Registered node /Local/Default
2008-12-15 09:21:20 CET - T[0xB040F000] - Plug-in Local state is now active.
2008-12-15 09:21:20 CET - T[0xB0513000] - Registered node /Search
2008-12-15 09:21:20 CET - T[0xB0513000] - Registered node /Search/Contacts
2008-12-15 09:21:20 CET - T[0xB0513000] - Registered node /Search/Network
2008-12-15 09:21:20 CET - T[0xB0513000] - Plug-in Search state is now active.
2008-12-15 09:21:21 CET - T[0xB030B000] - Registered node /Cache
2008-12-15 09:21:21 CET - T[0xB030B000] - Plug-in Cache state is now active.
2008-12-15 09:21:22 CET - T[0xB0207000] - Plugin "Active Directory", Version "1.6.3", is set to load lazily.
2008-12-15 09:21:22 CET - T[0xB0207000] - Plugin "PasswordServer", Version "4.0.3", is set to load lazily.
2008-12-15 09:21:32 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:21:34 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:21:34 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:21:57 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:22:22 CET - T[0xB0103000] - Plugin "PasswordServer", Version "4.0.3", loaded on demand successfully.
2008-12-15 09:22:22 CET - T[0xB0103000] - Plug-in PasswordServer state is now active.
2008-12-15 09:29:10 CET - T[0xA0786FA0] -
2008-12-15 09:29:10 CET - T[0xA0786FA0] - DirectoryService 5.5 (v514.23) starting up...
2008-12-15 09:29:10 CET - T[0xB0185000] - Initializing TCP ...
2008-12-15 09:29:10 CET - T[0xB0207000] - Plugin <Cache>, Version <1.0>, processed successfully.
2008-12-15 09:29:10 CET - T[0xB0207000] - Plugin <Configure>, Version <3.0>, processed successfully.
2008-12-15 09:29:10 CET - T[0xB0207000] - Plugin <Local>, Version <1.0>, processed successfully.
2008-12-15 09:29:10 CET - T[0xB0207000] - Plugin <LDAPv3>, Version <3.0>, processed successfully.
2008-12-15 09:29:10 CET - T[0xB0207000] - Plugin <Search>, Version <3.0>, processed successfully.
2008-12-15 09:29:10 CET - T[0xB0207000] - Plugin <BSD>, Version <2.0>, processed successfully.
2008-12-15 09:29:10 CET - T[0xB038D000] - Registered node /Configure
2008-12-15 09:29:10 CET - T[0xB038D000] - Plug-in Configure state is now active.
2008-12-15 09:29:10 CET - T[0xB0491000] - Plug-in LDAPv3 state is now active.
2008-12-15 09:29:10 CET - T[0xB0595000] - Registered Locally Hosted Node /BSD/local
2008-12-15 09:29:10 CET - T[0xB0595000] - Registered node /BSD/local
2008-12-15 09:29:10 CET - T[0xB0595000] - Plug-in BSD state is now active.
2008-12-15 09:29:10 CET - T[0xB0513000] - Registered node /Search
2008-12-15 09:29:10 CET - T[0xB0513000] - Registered node /Search/Contacts
2008-12-15 09:29:10 CET - T[0xB0513000] - Registered node /Search/Network
2008-12-15 09:29:10 CET - T[0xB0513000] - Plug-in Search state is now active.
2008-12-15 09:29:10 CET - T[0xB040F000] - Registered Locally Hosted Node /Local/Default
2008-12-15 09:29:10 CET - T[0xB040F000] - Registered node /Local/Default
2008-12-15 09:29:10 CET - T[0xB040F000] - Plug-in Local state is now active.
2008-12-15 09:29:10 CET - T[0xB030B000] - Registered node /Cache
2008-12-15 09:29:10 CET - T[0xB030B000] - Plug-in Cache state is now active.
2008-12-15 09:29:10 CET - T[0xB0207000] - Plugin "Active Directory", Version "1.6.3", is set to load lazily.
2008-12-15 09:29:10 CET - T[0xB0207000] - Plugin "PasswordServer", Version "4.0.3", is set to load lazily.
2008-12-15 09:29:19 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:29:20 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:29:20 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:29:44 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:29:58 CET - T[0xB0103000] - Plugin "PasswordServer", Version "4.0.3", loaded on demand successfully.
2008-12-15 09:29:58 CET - T[0xB0103000] - Plug-in PasswordServer state is now active.
2008-12-15 09:52:11 CET - T[0xA0786FA0] -
2008-12-15 09:52:11 CET - T[0xA0786FA0] - DirectoryService 5.5 (v514.23) starting up...
2008-12-15 09:52:11 CET - T[0xB0185000] - Initializing TCP ...
2008-12-15 09:52:11 CET - T[0xB0207000] - Plugin <Cache>, Version <1.0>, processed successfully.
2008-12-15 09:52:11 CET - T[0xB0207000] - Plugin <Configure>, Version <3.0>, processed successfully.
2008-12-15 09:52:11 CET - T[0xB0207000] - Plugin <Local>, Version <1.0>, processed successfully.
2008-12-15 09:52:11 CET - T[0xB0207000] - Plugin <LDAPv3>, Version <3.0>, processed successfully.
2008-12-15 09:52:11 CET - T[0xB0207000] - Plugin <Search>, Version <3.0>, processed successfully.
2008-12-15 09:52:11 CET - T[0xB0207000] - Plugin <BSD>, Version <2.0>, processed successfully.
2008-12-15 09:52:11 CET - T[0xB038D000] - Registered node /Configure
2008-12-15 09:52:11 CET - T[0xB038D000] - Plug-in Configure state is now active.
2008-12-15 09:52:11 CET - T[0xB0491000] - Plug-in LDAPv3 state is now active.
2008-12-15 09:52:11 CET - T[0xB0595000] - Registered Locally Hosted Node /BSD/local
2008-12-15 09:52:11 CET - T[0xB0595000] - Registered node /BSD/local
2008-12-15 09:52:11 CET - T[0xB0595000] - Plug-in BSD state is now active.
2008-12-15 09:52:11 CET - T[0xB040F000] - Registered Locally Hosted Node /Local/Default
2008-12-15 09:52:11 CET - T[0xB040F000] - Registered node /Local/Default
2008-12-15 09:52:11 CET - T[0xB040F000] - Plug-in Local state is now active.
2008-12-15 09:52:11 CET - T[0xB0513000] - Registered node /Search
2008-12-15 09:52:11 CET - T[0xB0513000] - Registered node /Search/Contacts
2008-12-15 09:52:11 CET - T[0xB0513000] - Registered node /Search/Network
2008-12-15 09:52:11 CET - T[0xB0513000] - Plug-in Search state is now active.
2008-12-15 09:52:12 CET - T[0xB030B000] - Registered node /Cache
2008-12-15 09:52:12 CET - T[0xB030B000] - Plug-in Cache state is now active.
2008-12-15 09:52:12 CET - T[0xB0207000] - Plugin "Active Directory", Version "1.6.3", is set to load lazily.
2008-12-15 09:52:12 CET - T[0xB0207000] - Plugin "PasswordServer", Version "4.0.3", is set to load lazily.
2008-12-15 09:52:20 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:52:21 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:52:22 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:52:46 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:54:57 CET - T[0xB0103000] - Plugin "PasswordServer", Version "4.0.3", loaded on demand successfully.
2008-12-15 09:54:57 CET - T[0xB0103000] - Plug-in PasswordServer state is now active.
2008-12-15 09:55:27 CET - T[0xA0786FA0] - Shutting down DirectoryService...
2008-12-15 09:56:56 CET - T[0xA0786FA0] -
2008-12-15 09:56:56 CET - T[0xA0786FA0] - DirectoryService 5.5 (v514.23) starting up...
2008-12-15 09:56:56 CET - T[0xB0185000] - Initializing TCP ...
2008-12-15 09:56:56 CET - T[0xB0207000] - Plugin <Cache>, Version <1.0>, processed successfully.
2008-12-15 09:56:56 CET - T[0xB0207000] - Plugin <Configure>, Version <3.0>, processed successfully.
2008-12-15 09:56:56 CET - T[0xB0207000] - Plugin <Local>, Version <1.0>, processed successfully.
2008-12-15 09:56:56 CET - T[0xB0207000] - Plugin <LDAPv3>, Version <3.0>, processed successfully.
2008-12-15 09:56:56 CET - T[0xB0207000] - Plugin <Search>, Version <3.0>, processed successfully.
2008-12-15 09:56:56 CET - T[0xB0207000] - Plugin <BSD>, Version <2.0>, processed successfully.
2008-12-15 09:56:56 CET - T[0xB038D000] - Registered node /Configure
2008-12-15 09:56:56 CET - T[0xB038D000] - Plug-in Configure state is now active.
2008-12-15 09:56:56 CET - T[0xB0491000] - Plug-in LDAPv3 state is now active.
2008-12-15 09:56:56 CET - T[0xB0595000] - Registered Locally Hosted Node /BSD/local
2008-12-15 09:56:56 CET - T[0xB0595000] - Registered node /BSD/local
2008-12-15 09:56:56 CET - T[0xB0595000] - Plug-in BSD state is now active.
2008-12-15 09:56:56 CET - T[0xB040F000] - Registered Locally Hosted Node /Local/Default
2008-12-15 09:56:56 CET - T[0xB040F000] - Registered node /Local/Default
2008-12-15 09:56:56 CET - T[0xB040F000] - Plug-in Local state is now active.
2008-12-15 09:56:56 CET - T[0xB0513000] - Registered node /Search
2008-12-15 09:56:56 CET - T[0xB0513000] - Registered node /Search/Contacts
2008-12-15 09:56:56 CET - T[0xB0513000] - Registered node /Search/Network
2008-12-15 09:56:56 CET - T[0xB0513000] - Plug-in Search state is now active.
2008-12-15 09:56:56 CET - T[0xB04A2000] - Local Plugin - index passed integrity check
2008-12-15 09:56:56 CET - T[0xB030B000] - BSD Plugin - index passed integrity check
2008-12-15 09:56:56 CET - T[0xB030B000] - Registered node /Cache
2008-12-15 09:56:56 CET - T[0xB030B000] - Plug-in Cache state is now active.
2008-12-15 09:56:56 CET - T[0xB0207000] - Plugin "Active Directory", Version "1.6.3", is set to load lazily.
2008-12-15 09:56:56 CET - T[0xB0207000] - Plugin "PasswordServer", Version "4.0.3", is set to load lazily.
2008-12-15 09:57:07 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:57:08 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:57:08 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:57:30 CET - T[0xB0081000] - Network transition occurred.
2008-12-15 09:59:14 CET - T[0xB0103000] - Plugin "PasswordServer", Version "4.0.3", loaded on demand successfully.
2008-12-15 09:59:14 CET - T[0xB0103000] - Plug-in PasswordServer state is now active.
Seems ok or what? - But nothing works!Since update to OS X Server 10.5.6 I have the same problem.
what is to do?? -
How to restart HTTP Server, OC4J after failure.
Hi ,
I want to test "Death detection and Automatic Restart" feature for a failed instance.
Environment details :
- Oracle 10g AS Release 2. (J2EE and Web Cache)
- Microsoft Windows XP OS
Here are the steps that I have done to implement this for HTTP Server.
1) Following change done in opmn.cml file
<process-set id="HTTP_Server" restart-on-death="true" numprocs="1">
<module-data>
<category id="start-parameters">
<data id="config-file" value="D:\OraHome_1\Apache\Apache\conf\httpd.conf"/>
<data id="start-mode" value="ssl-disabled"/>
<data id="command-line" value="-D MyDefine"/>
</category>
<category id="ping-parameters">
<data id="ping-url" value="/"/>
</category>
<category id="restart-parameters">
<data id="reverseping-timeout" value="345"/>
<data id="no-reverseping-failed-ping-limit" value="3"/>
<data id="reverseping-failed-ping-limit" value="6"/>
</category>
</module-data>
<start timeout="60" retry="3"/>
<stop timeout="60"/>
<restart timeout="30"/>
<ping timeout="30" interval="30"/>
</process-set>
2) Running following command
- opmnctl reload opmn.xml
- dcmctl resyncinstance -ct ohs
- dcmctl updateconfig -ct opmn
To test this out, I execute this command
- opmnctl stopproc ias-component=HTTP_Server
Will the HTTP Server restart automatically after 30 second ?
Is the "restart-on-death" feature is default ?From Metalink Note:298551.1
By default, as in the schema definition file, opmn.xsd, the restart-on-death parameter takes a default BOOLEAN value of "TRUE" which means that OPMN mandate is to ping the managed processes ( OC4J instances and Apache ) at certain pre-defined intervals, monitor them for a response within a certain specified timeout period and retry the operation 3 times before concluding that the process is dead due to its non-responsive state and killing and restarting it to guarantee that the managed processes are up and able to service client requests on an ongoing basis - this is OPMN's mandate in ensuring failover and availability of the processes it manages.
"restart-on-death" is defalt? -
Restarting App server and Process Scheduler
Hi all,
Can any body send me the document on how to Restart App server and Process Scheduler.
Thanks In Advance
KarthikUse the psadmin utility under $PS_HOME/appserv.
https://peoplebooks.uta.edu/PSOL/pt846books/eng/psbooks/tsvt/chapter.htm?File=tsvt/htm/tsvt03.htm%23H3005
Nicolas. -
10 g AS (How to restart)
Hi
My database is up but how to restart Application server ?
(Environment AIX 5.3, 10 g )
Regards
DenHi,
To start all
#Opmnctl startall
To start one component
# opmnctl startproc process-type= (your component)
To check the status
#opmnctl status
To start iasconsole
# emctl start iasconsole
To check the status
emctl status iasconsole
Cheers,
Hamdy -
How to convert RAW files that saved in UCCX server to wav file?
Hi all,
How we can covert the RAW files that are saved in UCCX server to wav file by using command prompt in UCCX servers. Or is there some other way? So that we should be able to hear the sound of these files.
C:\Program Files\Cisco\Desktop_Audio
Regards
Ali RazaHi,
I use Switch File Audio Convertor from NCH Software to do this.
It is a commercial product but there is a time limited evaluation and if you decide to keep it it is only $30.
http://www.nch.com.au/switch/index.html
It is great for converting audio files to the correct format for music on hold as well. -
How to add swap in solaris 11 and still will take effect even you restart the server
Hi,
I would like to ask on how to add swap file in solaris 11 will still take effect even you restart the server.
swap -l
zfs create -V 2G swappool/swap2
swap -a /dev/zvol/dsk/rpool/swap2
Regards,
AndrewHi Andrew,
After completing the steps above, you will need to add an entry for the new swap volume to the /etc/vfstab as described in this doc if you want the swap volume to be used when the system is rebooted:
Adjusting the Sizes of Your ZFS Swap and Dump Devices - Managing ZFS File Systems in Oracle® Solaris 11.2
Thanks, Cindy -
How to modify JSP on Weblogic without restarting a server
Hello,
Could someone explain how to modify JSP on Weblogic without restarting a server?
We use WL 10.2.
I search and modify required jsp on a server, but nothing happens on a Web Browser. I run in Development mode.
Please advice,
Thanks,
YuriHi Yuri,
As you are in Development mode you have one options to use the Auto Deploy folder which can be found in the following path (domain_name/autodeploy).
More information on Auto Deployment check the below link:
http://download.oracle.com/docs/cd/E11035_01/wls100/deployment/autodeploy.html#wp1021626
Other option is to use the following parameter "*page-check-seconds*" in your weblogic.xml file
For more information check out the below link
Topic: jsp-descriptor
http://download.oracle.com/docs/cd/E13222_01/wls/docs103/webapp/weblogic_xml.html#wp1038491
Hope this helps you.
Regards,
Ravish Mody
http://middlewaremagic.com/weblogic/
Middleware Magic | Come, Join Us and Experience The Magic… -
How to make changes effect in log4j.xml without restarting weblogic server
Hi ,
I have successfully configured log4j in my weblogic server 8.1.
Everytime i made a change in log4j.xml i need to restart the server
is there any configuration or parameter to set without restarting server??
Thanks in advance,
CKI don't think you need to restart the server, atleast I never needed to when making changes to jsp pages. You only need to restart when you make changes to java classes. Some might argue jsp is converted to servlet which is a java class.....
Try refreshing the page when you make any changes. This works for me, if it doesn't work try turning reloadable="true" in your context path in tomcat's server.xml -
How to restart server forcelly
I want to restart my server forcelly.
Can any body help me to do this.
I will thank ful.On word - Power cord.
Pull it out. Wait 30 seconds. Push back in.
But if you want a sofware solution then all such solution will require OS specific code, which means you would need to specify what OS and version you are working on. -
Site does not load after some minutes of creation or after restart the server
Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, ConfiguringHi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring -
How to start the server in debug mode
HI
Im working on weblogic server 8.1 sp. My requirement is to run the application in hosted on weblogic server with out restaring the server i.e dynamiically turn to debug mode with out stopping. IM using Log4j method for logging. please let me know how to do it... if any one have sample java code
Thanks & regards
shivaI am not sure, how can you do it on the fly, but if you want to restart the server here are the parameters you need to add to the java arguments
-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=$Port
(where Port will be any port you want to connect to).
Thanks
Togotutor
<b><a class="jive-link-external" href="http://www.togotutor.com">http://www.togotutor.com</a> (Learn Programming and Administration for Free)</b>
Edited by: togotutor on Aug 12, 2010 3:44 PM -
I have created a Linked Server to Access Database of 64 MB in Size located in Remote System to SQL Server 2012.In Start for Some time it works fine and after it is giving the Error
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Previously I thought it as Permission Issue. By trying some fixes proposed in forums it not fixed. But, after restarting the SQL Server Services without changes to the linked Server it works perfectly. How could i fix it. I don't want restart the SQL Server
Service it leads to Some other process failures.
RehaanKhan. MAfter all the Errors, When I am restarting the SQL Server its working correctly.
Whats the problem it is clearing itself after restarting of SQL Server. Why ?. I can't find anything regarding this in SQL Server .
The following are the Errors i got connecting to SQl Server.
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Error-2:
Executed as user: RMS\Administrator. Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST". [SQLSTATE 42000] (Error 7303) OLE DB provider
"Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.". [SQLSTATE 01000] (Error 7412). The step failed.
After unchecking the Allow In Process in OLEDB.ACE Provider Properties.
Msg 7399, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" reported an error. Access denied.
Msg 7301, Level 16, State 2, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot obtain the required interface ("IID_IDBCreateCommand") from OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
for to fix above error i have followed the instructions in the following link,
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/08/19/permissions-needed-to-set-up-linked-server-with-out-of-process-provider.aspx
This also failed to work. I Restarted SQL Server and make the Linked Server Properties Default to my Configuration and it works fine.
Can you suggest me a solution for this issue. Every time i don't want to restart SQL Server Services as it effects other jobs and Processes.
Thank you.
RehaanKhan. M -
How to change default Server NFS version in Solaris 10 ?
How to change default Server NFS version in Solaris 10 ?
I need to change default version of NFS server version, currently i have NFS_SERVER_VERSMAX=2, for changing NFS version i changed this variable in /etc/default/nfs, but still its using version 2,
Please let me know where else i need to change./
Thanks a lot in advance!!!Did you change the /etc/default/nfs on the server or on the client?
What is NFS_SERVER_VERSMIN set to? The NFS server is allowed to use any version in the span of NFS_SERVER_VERSMIN and NFS_SERVER_VERSMAX.
NFS_SERVER_VERSMAX=4
The default of NFS_SERVER_VERSMIN is 2.
And, as mentioned, you will have to restart your NFS server for changes to take effect.
.7/M. -
How to restart the J2EE Engine
I ran a couple tests the other day, and the next time I looked the J2EE Engine was down. (Could not send or receive PTP messages to it).
When I brought up the J2EE Engine Administrator, it put upt the following help box:
<b>Unable to lookup connection default
http:host1:8101/msgserver/text/login returned empty list of connection parameters</b>
I had to reinstall to get it to work.
Does anyone know how to restart the J2EE engine ?
Thanks, JohnHi,
judging by the URL given in the error message (which is a URL that queries the message server), your engine must be of 6.40 version. Well, on 6.40 you should have the SAP Management Console (SAP MMC) that you can open and start the engine from. TO open it, go to Start -> Programs -> SAP Management Console. Inside, locate your SAP System, right-click on it and select Start.
That's it.
Just for a reference, <a href="http://help.sap.com/saphelp_nw04/helpdata/en/9b/dd7277f3e64ecba59f7fbac7edd2fe/frameset.htm">this</a> page contains also some screenshots of the MMC.
Maybe you are looking for
-
<blockquote>Locking duplicate thread.<br> Please continue here: [[/questions/925643]]</blockquote> Something may have happened when I cleaned out the cache & cookies ... but, I am not sure. I have lines in my aol email now ... the font is all differe
-
Hi Gurus, Our customer needs to have two types of components (related to purchase flow). - Material without quality, so, the GR will be a 101. - Material with quality. The flow must be a 103 and a inspection lot must be created. How can i define the
-
Problems with Buy List in Mac App Store
Hi I'm from Spain, and i've delated accidentally iPhoto from the "Comprado List" in English could be "Buy List", and I don't what to do for Restore the List abd to do iPhoto appear again in the list. Anyone has that problem?
-
Adobe LiveCycle Designer & Mac?
Please help me understand this: I have a Mac. I have Acrobat Pro XI via the Creative Cloud. There is a button within Acrobat Pro XI that says "Edit Text & Images" When I press this button it says "This form cannot be edited in Acrobat. Please use Ado
-
I have converted some files from my Nikon D300 NEF to DNG format with the latest version of DNG conert but the appearance is horrible colors too saturated and warm and very fuzzy. Anyone can help me? thanks