How to restrict Availability check for a particular storage location

Dear all,
As per the Business requirement, System should not consider the stock in a particular storage location.
while sales order creation, system should not confirm the requested delivery date based on the stock available in that particular storage location.
How could we map this requirement in SAP, Please educate me to resolve this issue. Your suggestions will be highly appreciated.
Thank you,
Raghu Ram.

Dear Lakshmipati,
as you said correctly this storage location is there in MMSC for the article which we are using in Sales Order.
I have tried to delete this storage location but system is not allowing to do so.
I could not understand, from where this storage location is being determined. we have not mentioned any where in article master data.
please help us to resolve this issue, and thanks for your help in advance.
thank you
Raghu Ram

Similar Messages

Restrict Availability check for Line item in sales order

Hi Folks,
My requirement is some what different than the usual,I want to stop availability check for a particular line item,while creating sales order on a particular condition (example when quantity is changed for that line item),please suggest if there is any way to do so.
Thanks for your valuable support.

Hi
we need to maintain the username of the person who has triggered this process through XI .
I BAPI we cannot instruct the BAPI to maintain a specific username.
that is why i am using this FM because this will allow us to maintain the change history with the username we want
Regards
Nikhil

Stop billing(sales) for a particular storage location.

Dear experts,
How can we stop billing to the customers completely for a particular storage location.
please suggest...
thanks in advance.
Regards

Hi,
This can be achieved by restricting the authorisation for that particular Sloc in VF01 which restricts from billing w r t that particular sloc.
Thanks

Exclude availability check for a particular stor. loc.

Hi,
I need to exclude a stor. loc. for availability check. MRP should not be excluded.
How can I do that?
Thanks in advance.
Sonal

Hi ,
For exclude the storage location from availability check plz follow the below
1. Go to transaction OPPJ
2.Select Determine Check
3.Select the availability type which you use and go to details
4.There you can find the Storage location check tab
5.put the check mark in No Storage location inspection and save.
So that the storage location will not be included.
Hope it will clear you.
Regards,
Vijay.

Creation of PO only for one particular storage location

Hi Friends
One of my material is extended to four storage location within a plant say S001 S002 S003 and S004 but here requirment is at the time of raising PO for this material,system should always propose only one particular storage location say S001. Is this possible
Need your guidance
Regards
VS

Hi supergene
system will never propose particular storage location based on material.
May be u can add particular storage location in <b>personal setting</b> so that for all PO it will be picked as default storage location.
system will propose storage location at the time of GR based on storage location maintained in Material master
Or
you can use the authorisation object M_MSEG_LGO. To restrict users from using storage location other than which they have authorised for
Vishal...

Prodn Or Mtrl Avail check for a particular Stor Locn ONLY

Hi,
I have a scenario, wherein ther are 2 Stor Locn
FG01 (finish goods)
RJ01 (rejected goods)
There is a prodn order being created for a particular material which consumes materials from RJ01 "ONLY".
How can I set the Mtrl Avail check in Production order execution such that it ignores all the other Stor Locn and does the ATP Check for RJ01 locn ONLY.
Thanks in advance,
Harris

Hi,
In the definition of scope of check for that checking group and rule (transaction OVZ9) make sure that the flag of "no storage location inspection is NOT SET.
... and of course that there's a storage location definition in the production order component.
Regards,
Mario

How to restrict Option values for a particular metadata in profile checkin

How to restrict Option values (drop down) for a particular metadata in profile checkin-
Metadata field Color is having options dropdown values (stored in table/views)-
Display name - Blue, Value=1
Display name - Red, Value=2
Display name - Yellow, Value=3
Display name - Green, Value=4
Display name - Black, Value=5
For a particular profile checkin form, for the metadata field Color I want the dropdown value consist of only top three options
Display name - Blue, Value=1
Display name - Red, Value=2
Display name - Yellow, Value=3
But this should be done on profile level only, should not impact the standrad checkin form and other profile checkin forms.
Please help me if any one having any suggestion to implement the above secnario
Thanks,
Sumit

Hi,
Into the rule containing the Color metadata, you can restrict the values of the list.
In "Has restricted list and pane", list the values 1, 2 and 3 (new line for each value) :
1
2
3
Romain.

Availability check for Make to stock and Make to Order

Dear All,
Client is selling Make to stock and make to Order material.
How and what settings need to do for Avaialbility check.or we can use standard one.
I hope in case of Make to Order availability check may not happen.
Please correct me.
Thanks in advance.
Regards,
Shrikant

hi,
yes for make to order we dont have AvChk. for make to stock items u need to follow the
below configuration.
Availability check
1. Availability check is an integral part of the business process that determines if the required delivery quantity can be met on a required delivery date. For this purpose the system takes into account pre-delivery activities such as scheduling for picking or packing times and the time taken to produce or obtain the material. It also performs several background functions such as Backorder processing, rescheduling and ATP quantities.
2. Backorder processing: processing of a sales order that has not been fully confirmed or not confirmed at a certain delivery date.
3. Rescheduling: is a proposal of how u2013 confirmed quantities already assigned to a sales order can be reassigned to other sales orders that have a higher priority.
4. Available to promise (ATP): is a process of checking the available quantities of a material. The ATP quantity consists of warehouse stock + planned receipts (incoming stock) u2013 planned issues (outgoing stock). to examine stock on hand (CO09) proceed to logistics u2013 sales & distribution u2013 sales u2013 environment u2013 availability overview.
5. Replenishment lead time (RLT): is the time taken for the material to become available either internally (in house production) or externally (from a vendor). The most important things to consider during an external procurement are purchasing and MRP 2 (procurement) views of MMR where the processing time for purchasing, planned delivery time and goods receipt processing time are taken into account. On the other hand internal procurement is based on in house production time (MRP 2 view) goods receipt processing time or alternatively RLT time, which is found on MRP 3 view.
6. RLT (Replenishment Lead Time) is the time taken for the material to become available. RLT is only used when doing an ATP check (Available To Promise). The value of RLT for a material is specified on material master record.
7. There are three types of availability checks u2013
Check on basis of ATP quantities.
Check against product allocation.
Check against planning.
Configuring Availability check through Checking Groups u2013
1. The checking group + checking rule determine how the availability check is to be performed.
2. The checking group determines whether and how the system checks the stock availability and generates requirements for material planning. The checking group defines what type of requirements will be passed on i.e. summarized requirements (daily/weekly) or individual requirements for each sales order.
3. The checking rule applies to how the availability check is to be carried out at the transaction level. Note that you must define checking rules for each individual application such as for production orders for example. In Sales and Distribution, the checking rule is specified internally within the system and cannot be changed.
4. The checking rule, in conjunction with the checking group, determines the scope of the availability check for every business operation; that is, which stocks, receipts and issues are to be included in the availability check and whether the check is to be carried out with or without the replenishment lead time.
5. Briefly explaining the above u2013 checking group determines which type of requirement to be passed on to MRP whether it be individual or summarized and checking rule which is at the transaction level and can be configured independently for each application module, determines which stocks, receipts and issues to be taken into account. For performing an availability check checking group has to work in conjunction with checking rule.
6. Advantages of individual processing over summarized processing u2013
Backorder processing is possible.
You can access (MD04) order, line and schedule line individually which gives a greater control on available stock and requirements placed on stock.
The system automatically uses individual requirements in case of special stock items.
7. Required data for the Availability check to be carried out u2013
The Availability check must be switched on at the requirement class level.
The Availability check must be set at the schedule line level.
A requirements type must exist by which the requirements class can be found.
A plant must be defined in the sales order for each schedule line item (in other words plant must be defined for every material in MMR).
A checking group must be defined in the material master record in the MRP3 screen in the availability check field.
8. Configuring Availability check and defining Checking Groups u2013
Checking groups are introduced into the sales order based on the setting in the material master record.
SAP standard checking groups are 01 u2013 summarized requirements and 02 u2013 individual requirements or you can create your own by copying the standard ones.
Total sales and total deliveries columns are there to configure a checking rule to sum up requirements to post to MRP either individually or by day or week.
Block quantity required can be set if you want several users to be able to process the material simultaneously in different transactions without blocking each other.
The no check indicator is CHECKED when you DO NOT want the system to carry out ATP check.
9. Defining material block for other users u2013 the block check box is an indicator that enables you to block material master records of a particular material during the availability check and restrict other users from accessing same master record and reserve the material. If the block is not set, two users can confirm the same material at the same time for two different orders, not knowing if the stock is available or not. If you select this field, the material is blocked during the availability check and other users cannot: a) Make changes in the material master record. b) Create purchase orders for the material. C) Create orders for the material.
10. Defining default values for checking groups - Checking groups are introduced into the sales order based on the setting in the material master record.
However if there is no entry present in the material master record for the checking group, a default value can be set here, depending on material type and plant.
This default value will be used by the system depending on the material type mentioned in MMR and plant in sales order.
If an entry exists, this default value is over written by MMR.
11. Controlling Availability Check u2013 in this section, you tell the system what stock on hand and what inward and outward movements of stock it must take into account when performing the availability check in addition to whether or not to consider the replenishment lead time.
12. These settings are based on the checking group that is assigned to the material master record and the checking rule that is predefined and assigned to the sales and distribution transaction.
13. These settings carry out control both for sales order and delivery as well. This is due to the fact that you may want to include specific stock or incoming stock for the sales order, yet at the time of the delivery only include physical stock on hand waiting to be shipped.
14. It is possible to indicate to the system that you would like the availability check NOT TO CHECK the stock at the storage location level. This indicator is used to set the scope of the availability check.
15. It is used to switch off the check at storage location level. You create a reservation for a particular storage location. However, the scope of the availability check is set in such a way as to exclude the storage location. In this case, the system carries out the check at plant level only and does not take the storage location into account that is specified in the reservation.
16. Should you not want the system to automatically check RLT, you may indicate so here. RLT is the time taken for a material to become available. It is only used when doing an ATP check and is taken from MMR.
17. Defining the elements in the availability check entirely depends on the business needs, but a few tips are given under u2013
When controlling the Availability check at the time of the sales order, a purchase requisition does not necessarily indicate by it is going to come into the plant.
A shipping notification on the other hand - a confirmed purchase order u2013 is a good indicator of receiving stock on a specified date.
It is always recommended not to select the shipping notifications for the delivery requirements type as you may not actually receive the stock into plant or warehouse for which you are creating a delivery.
regards
anand

How to configure ATP check for "create standard order in SD (OR type)"

first, I had check my stock, I only have ten PC
, but when I enter 100 PC in a OR order, and issue ATP check, it is carries out, why? I had set availavility check into 02 in MRP3 view

Availability check
1. Availability check is an integral part of the business process that determines if the required delivery quantity can be met on a required delivery date. For this purpose the system takes into account pre-delivery activities such as scheduling for picking or packing times and the time taken to produce or obtain the material. It also performs several background functions such as Backorder processing, rescheduling and ATP quantities.
2. Backorder processing: processing of a sales order that has not been fully confirmed or not confirmed at a certain delivery date.
3. Rescheduling: is a proposal of how u2013 confirmed quantities already assigned to a sales order can be reassigned to other sales orders that have a higher priority.
4. Available to promise (ATP): is a process of checking the available quantities of a material. The ATP quantity consists of warehouse stock + planned receipts (incoming stock) u2013 planned issues (outgoing stock). to examine stock on hand (CO09) proceed to logistics u2013 sales & distribution u2013 sales u2013 environment u2013 availability overview.
5. Replenishment lead time (RLT): is the time taken for the material to become available either internally (in house production) or externally (from a vendor). The most important things to consider during an external procurement are purchasing and MRP2 (procurement) views of MMR where the processing time for purchasing, planned delivery time and goods receipt processing time are taken into account. On the other hand internal procurement is based on in house production time (MRP 2 view) goods receipt processing time or alternatively RLT time, which is found on MRP 3 view.
6. RLT (Replenishment Lead Time) is the time taken for the material to become available. RLT is only used when doing an ATP check (Available To Promise). The value of RLT for a material is specified on material master record.
7. There are three types of availability checks u2013
Check on basis of ATP quantities.
Check against product allocation.
Check against planning.
Configuring Availability check through Checking Groups
1. The checking group + checking rule determine how the availability check is to be performed.
2. The checking group determines whether and how the system checks the stock availability and generates requirements for material planning. The checking group defines what type of requirements will be passed on i.e. summarized requirements (daily/weekly) or individual requirements for each sales order.
3. The checking rule applies to how the availability check is to be carried out at the transaction level. Note that you must define checking rules for each individual application such as for production orders for example. In Sales and Distribution, the checking rule is specified internally within the system and cannot be changed.
4. The checking rule, in conjunction with the checking group, determines the scope of the availability check for every business operation; that is, which stocks, receipts and issues are to be included in the availability check and whether the check is to be carried out with or without the replenishment lead time.
5. Briefly explaining the above u2013 checking group determines which type of requirement to be passed on to MRP whether it be individual or summarized and checking rule which is at the transaction level and can be configured independently for each application module, determines which stocks, receipts and issues to be taken into account. For performing an availability check checking group has to work in conjunction with checking rule.
6. Advantages of individual processing over summarized processing u2013
Backorder processing is possible.
You can access (MD04) order, line and schedule line individually which gives a greater control on available stock and requirements placed on stock.
The system automatically uses individual requirements in case of special stock items.
7. Required data for the Availability check to be carried out u2013
The Availability check must be switched on at the requirement class level.
The Availability check must be set at the schedule line level.
A requirements type must exist by which the requirements class can be found.
A plant must be defined in the sales order for each schedule line item (in other words plant must be defined for every material in MMR).
A checking group must be defined in the material master record in the MRP3 screen in the availability check field.
8. Configuring Availability check and defining Checking Groups u2013
Checking groups are introduced into the sales order based on the setting in the material master record.
SAP standard checking groups are 01 u2013 summarized requirements and 02 u2013 individual requirements or you can create your own by copying the standard ones.
Total sales and total deliveries columns are there to configure a checking rule to sum up requirements to post to MRP either individually or by day or week.
Block quantity required can be set if you want several users to be able to process the material simultaneously in different transactions without blocking each other.
The no check indicator is CHECKED when you DO NOT want the system to carry out ATP check.
9. Defining material block for other users u2013 the block check box is an indicator that enables you to block material master records of a particular material during the availability check and restrict other users from accessing same master record and reserve the material. If the block is not set, two users can confirm the same material at the same time for two different orders, not knowing if the stock is available or not. If you select this field, the material is blocked during the availability check and other users cannot: a) Make changes in the material master record. b) Create purchase orders for the material. C) Create orders for the material.
10. Defining default values for checking groups - Checking groups are introduced into the sales order based on the setting in the material master record.
However if there is no entry present in the material master record for the checking group, a default value can be set here, depending on material type and plant.
This default value will be used by the system depending on the material type mentioned in MMR and plant in sales order.
If an entry exists, this default value is over written by MMR.
11. Controlling Availability Check u2013 in this section, you tell the system what stock on hand and what inward and outward movements of stock it must take into account when performing the availability check in addition to whether or not to consider the replenishment lead time.
12. These settings are based on the checking group that is assigned to the material master record and the checking rule that is predefined and assigned to the sales and distribution transaction.
13. These settings carry out control both for sales order and delivery as well. This is due to the fact that you may want to include specific stock or incoming stock for the sales order, yet at the time of the delivery only include physical stock on hand waiting to be shipped.
14. It is possible to indicate to the system that you would like the availability check NOT TO CHECK the stock at the storage location level. This indicator is used to set the scope of the availability check.
15. It is used to switch off the check at storage location level. You create a reservation for a particular storage location. However, the scope of the availability check is set in such a way as to exclude the storage location. In this case, the system carries out the check at plant level only and does not take the storage location into account that is specified in the reservation.
16. Should you not want the system to automatically check RLT, you may indicate so here. RLT is the time taken for a material to become available. It is only used when doing an ATP check and is taken from MMR.
17. defining the elements in the availability check entirely depends on the business needs, but a few tips are given under u2013
When controlling the Availability check at the time of the sales order, a purchase requisition does not necessarily indicate by it is going to come into the plant.
A shipping notification on the other hand - a confirmed purchase order u2013 is a good indicator of receiving stock on a specified date.
It is always recommended not to select the shipping notifications for the delivery requirements type as you may not actually receive the stock into plant or warehouse for which you are creating a delivery.

How to configure availability check

can any one give me the availabily check steps

There are three types of availability check:
Check on the basis of the ATP quantities
Check against product allocation
Check against planning
In Customizing, you determine whether an availability check is to be carried out against the ATP quanitity or against planning. The check against product allocations is controlled in the material master and elsewhere in the system.
You control the availability check using general and SD-specific control features.
General Control Features
The following control elements need to be maintained in Customizing and in the material master record:
Strategy group
The allowed planning strategies (main strategy and further possible strategies) are combined in the strategy group. As of Release 3.0, the strategy group is specified in the material master record in the MRP 1 Screen. In Customizing, strategy groups are assigned, dependent on plant, to MRP groups. If the strategy group is missing in the material master record, it is determined on the basis of the MRP group, if it has been maintained.
Up to Release 3.0, the strategy group is determined on the basis of the MRP group
MRP group
The MRP group combines materials from the point of view of material requirements planning. This enables you to control planning for these materials in a particular way using, for example, the strategy group, consumption mode and planning period. You enter the MRP group in the material master in the MRP 1 screen. The strategy group is determined from the MRP group.
Planning Strategy
The planning strategy specifies the requirements type for planning and customer requirements. This represents the decisive control feature for the interaction between Production Planning and Sales and Distribution.
MRP type and item category
If no requirements type is found using the planning strategy, the system tries to determine a corresponding requirements type on the basis of the MRP type and the item category.
Determination of the requirements type via planning strategy has taken priority. This is not always the best option, however, as the following example will show. A requirements type is determined for a material, which causes availability to be checked against planning. In consignment stock processing, however, availability should be checked against stock. Until 3.0C the availability check had to be deactivated in these cases. As of Release 3.0C, you can determine how the requirements type is to be determined for each transaction by maintaining the Source field in Determination of requirement types using transaction in Customizing.
Requirements type
The various requirements are identified by their requirements type. The requirements type refers to the requirements class and its control features.
Requirements Class
The requirements class contains all control features for planning such as relevance for planning, requirements planning strategy and requirements consumption strategy. In addition, it is specified at a global level whether an availability check is to take place for the material in the sales and distribution documents on the basis of the ATP quantity (ATP = available to promise) and whether requirements are to be passed on. A finer degree of control can be obtained for sales documents using the schedule line category.
Control Features Specific to Sales and Distribution
The following SD-specific control features need to be maintained in Customizing:
Checking group
The checking group controls whether the system is to create indivdual or collective requirements in sales and shipping processing. In addition, a material block for the availability check with transfer of requirements can be set here. The checking group can also be used to deactivate the availability check. This option was created especially for the assembly order so that when the bill of material is exploded in the assembly order, the individual components, if necessary, can be classified as non-critical parts as far as procurement is concerned.
The checking group specifies in combination with the checking rule the scope of the availability check. It is proposed in the material master record on the basis of the material type and the plant, and copied into the sales and distribution documents.
Checking Rule
You use the checking rule to control the scope of the availability check for each transaction in sales and distribution. You also specify whether the check should be carried out including or excluding replenishment lead time. The individual checking rules define by transaction, which stock and inward and outward movement of goods should be taken into account for the availability check.
Schedule line category
You can control with the schedule line category whether an availability check and transfer of requirements should be carried out in the sales documents. The possible settings for this at schedule line level are dependent on the settings in the requirements class which is determined from the requirements type of the material.
Delivery item categoryThe delivery item category can be used to control whether an availability check takes place in deliveries.
Prerequisites
An availability check can only be carried out if the following prerequisites have been fulfilled:
The control elements described above for the availability check must be maintained in Customizing for Sales and the relevant assignments made to the sales transactions
The availability check must be switched on at requirements class level and - for the availability check in the sales documents - at schedule line category level
A requirements type must exist by which the requirements class can be found
A plant must be defined. It can either be proposed from the customer or material master record or can be entered manually in the document.
A checking group must be defined in the material master record on the Sales/plant data screen in the Availability check field
regards,
Siddharth

Bypass material D-Chain specific status check for a particular order type

Hello All,
For a material, I want to by-pass it's D-Chain specific status check for a particular order type.
Currently when you enter the that material in the order, I am getting warning: Material XYZ has status: ABC hold
I want to py-pass this warning message, how to do this? Can we configure this based on order type??
Pls. help me.
Thanks,
Shreekant

Hi Kapil,
Threre are some material for which D-Chain status ( MVKE-VMSTA) in the materila master are set in such a way so that deliveries can not be created. We need to bypass this restriction for couple of delivery types. One of them is the delivery type used for intracompany STO.
I am looking for some way out like user exit so that I dont need to change existing config change for those statuses.
Regards,
Subhankar

How can I take check box in particular cell of the table in smartforms??

Hi experts,
pls tell me how can I take check box in particular cell of the table in smartforms??
It is not interactive form.
I hv taken small windows as check boxes.but i think it is not a proper solution....give me another solution...

Hi,
first create text for a particular cell.
In that we have a text editor in that text editor we have symbols in include menu.
whatever the symboll u want to put to ur cell . just assign it.
please check it. if it helpful reward points.
regards,
satish.

Bapi or Function Module to do the availability check for Planned Orders

Hi all,
I need a Bapi or a Function Module to do the availability check for a Planned Orders. Anyone knows how?
I will use it in an Exit.
Thanks in advance
Points will be given

I think I found it.
If anyone is searching for it too, we will use these one:
CO_ZA_AVAIL_CHK_ORDER_MULTI

Cal Total Available budget for a particular Object No (Fund No)

Hi All,
Can anyone tell me how to cal Total Available budget for a particular Object No (Fund No)
Thanks

Hi,
Issue resolved on my own
Thanks

Reg:How to add availability check in sales view

hi all
How to add availability check in sales view
regards
JK

HI Janardan..
Check out the help.sap link for Availability check. It has a lot of info.
http://help.sap.com/saphelp_erp2005/helpdata/en/6b/2785347860ea35e10000009b38f83b/frameset.htm
If it helps Reward with points..
Regards Rk

How to restrict Availability check for a particular storage location

Similar Messages

Maybe you are looking for