How to restrict issue the form through VOFM routine

Hi Experts,
I have  developed form using adobe form, I need to issue the output only one time, once the output issued again the output should not issue.
I need to control this logic through VOFM routine...how to restrict ?
Thanks in advance.

Srinath,
Use the below option.
VOFM->REQUIREMENTS->O?P Control.
Create a new routine.
In the routine, check the table NAST using application, object key and message type. If you find an entry, set the sy-subrc value to 4 else set the subrc value to 0.
Let me know if this helps.
Thanks,
Vikram.M

Similar Messages

  • Sorting in iTunes changed - How do I get the former method restored?

    For a couple years I used iTunes for Windows with 2 music content folders - the normal iTunes folder(s) under my Windows profile in which I kept iTunes-purchases and iTunes CD-ripped songs, and one in c:\mp3 for unprotected ripped or purchased MP3 files. Until I made a change in iTunes, I had the following sort order properties when the corresponding header bar was clicked:
    Title
    =======
    'Wonderful
    "Dalla...
    "In Crowd...
    (I Love you) For...
    1,2,3
    101 Eastbound
    A Beautiful Morning
    Your Wildest Dreams.
    The same sort of effect was seen when sorting by Artist or Album or whatever.
    I decided I wanted ONE music folder. On advice from a magazine (Maximum PC) column, in preferences I chose to have iTunes organize my music (previously unchecked) and then in the advanced tab chose to iTunes Consolidate my music. It copied my music and everything initially looked fine. But, after looking more carefully, I saw the following new effect:
    Title
    =========
    Abilene
    Your Wildest Dreams
    1,2,3
    101 Eastbound
    99 Miles from L.A.
    and,
    Artist
    ======
    a-ha
    A3
    ZZ-Top
    10cc
    5th Dimension
    It's as if the entire sort order algorthm is different as regards punctuation and numerals. So, I unchecked the option to have iTunes "organize" my music, but the order didn't change.
    What am I missing here?? How do I get the former order back to column sorting?
    I'd appreciate any help you could give me - this is pretty annoying.
    thanks.
    Windows XP SP2
    Intel 2Mhz Core 2 Duo
    100MB H/D, 2GB RAM
    iTunes 7.3.0.54

    Get info and change the sort field(s) for one song,
    then click Apply.
    Right click the song and select Apply sort field and
    pick which you want.
    Unfortunately this is not working as intended with iTunes 7.3 for Windows (Mac too?). The "Apply Sort Field ..." does apply the new Sort Artist, Sort Album, etc. to related songs, but iTunes refuses to recognize that the songs were updated. If you check the tags, sure enough their Sort Artist, etc. have been updated, but iTunes does not seem to make use of the change. The only way I've been able to make it work is to go back into Get Info for each song and just cycle through them one-by-one without changing anything. As you cycle through, then the songs move to their proper sort order based on the updated sorting option. This wasn't the case with 7.2, so this would be a new bug.

  • How we can populate the form data from 2D barcode

    Hi All,
    Can anyone tell me how we can populate the form data from 2D barcode, will this can be done through script(javascript)?.
    Thanks & Regards,
    Faisal Afzal

    I was hoping someone could put me in the right direction here. I am basically doing the same . I am decodeing the information stored in a 2D Bar code and sending this information to an XML file, then I am trying to combine that xml file with a blank PDF template but the process is failing beacuse there are some additional tag fields the XML data from the  Decode->Extract XML process.
    The XML file from the decode process gives the structure below..notice therer some extra tags (lines 2- 4)
    <?xml version="1.0" encoding="UTF-8"?>
    <xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
    <xfa:datasets>
    <xfa:data>
    <form1>
    The XML structure that is expected by the PDF template is as follows
    <?xml version="1.0" encoding="UTF-8"?>
    <form1>
    So the xml output of the Decode barcode + Extract XML process has three extra lines of tag. Is there a way I could use a process within liveCycle to clean out those three lines in real-time before sending the xml to be recombined with the PDF template.
    Thanks

  • How do I reorder the form results from a non-BC form in Muse?

    I have a problem with Muse, in that the emails that get delivered from filled-in forms have various fields in the wrong order and not the order that the fields appear in the actual form.
    How do I ensure the form results emails maintain the order of the fields in the form?
    For example, on the www.actconstruction.com Subcontractors form, several of the fields are wildly out of order. Here's a screen capture of the form results email:
    Here's the form as it appears on the site. You can see the fields are in completely different order to the results emai:
    So, how do I make sure the fields follow a particular order that I want them to (i.e. in the order I placed them in the form itself)?
    The form can be seen at www.actconstruction.com/contact-us.html. This shows the actual order of information. The form results email should follow the order exactly as shown on the web site.
    I've had complaints from clients about this and need to handle it immediately. Please have someone get back to me with a figure-out.
    Many thanks,
    Len Williams
    727-466-6888

    I have a problem with Muse, in that the emails that get delivered from filled-in forms have various fields in the wrong order and not the order that the fields appear in the actual form.
    How do I ensure the form results emails maintain the order of the fields in the form?
    For example, on the www.actconstruction.com Subcontractors form, several of the fields are wildly out of order. Here's a screen capture of the form results email:
    Here's the form as it appears on the site. You can see the fields are in completely different order to the results emai:
    So, how do I make sure the fields follow a particular order that I want them to (i.e. in the order I placed them in the form itself)?
    The form can be seen at www.actconstruction.com/contact-us.html. This shows the actual order of information. The form results email should follow the order exactly as shown on the web site.
    I've had complaints from clients about this and need to handle it immediately. Please have someone get back to me with a figure-out.
    Many thanks,
    Len Williams
    727-466-6888

  • Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?

    Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?
    The add annotations field shows as not allowed in the security options. So how do I send this form back with the changes??

    I think you you need to click 'save' first, then it is saved to acrobat, where it will prompt to send.

  • How do I customize the forms to the SharePoint list

    I need to customize a form to a SharePoint list that I created in Visual Studio.
    After the deploy list, try to customize the EditForm.aspx, NewForm and forms, however when publishing the form of a message that basically says catastrophic error is displayed:
    This form is not a standard SharePoint.
    How do I customize the forms to the list created?

    Hi,
    Here is a link which describe how to customize SharePoint list forms using Visual Studio, Please compare it with your code and see if there is any possibility causing the error.
    http://www.codeproject.com/Articles/223431/Custom-SharePoint-List-Forms
    More important, I’d strongly recommend you using InfoPath Form to custom list form for SharePoint. For your convenience:
    http://msdn.microsoft.com/en-us/library/office/aa947697(v=office.15).aspx
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • I am new to working with pdf.  I am trying to fill out a form that was attached to a web site.  I have a Macbook Pro.  I am just learning Acrobat.  How do I get the form to accept input?

    I am new to working with pdf.  I am trying to fill out a form that was attached to a website.  I have a Macbook Pro and I am trying to learn Acrobat.  How do I get the form to accept my input?

    If there are Acrobat PDF form fields, not jus a space for a form field, then you will have to add them. It would be better to ask the provider of the form to add the fields. If you cannot add the fields, then you can use the add text feature.
    Have you looked in the "Tools" panel for the "Forms" category?
    Try Acrobat Users Community Tutorials , http://acrobatusers.com/tutorials.
    See Adobe TV - Acrobat, http://tv.adobe.com/channel/how-to/acrobat-xi-tutorials/.

  • How to mass cancel the requisitions through program

    How to mass cancel the requisitions through program

    Check this...you should get good idea
    http://docs.oracle.com/cd/E18727_01/doc.121/e13410/T446883T443951.htm#4021290
    Mahendra

  • How do I redirect the form to my email when I submit?

    How do I redirect the form to my email when I submit?

    Hi,
      You could use the "Email Receipts" or Email Notification" features in Options tab.
    Please check these out and see if this is what you are looking form.
    http://forums.adobe.com/docs/DOC-2664
    You will need to add a email field to your form requesting the form-submitter to enter his/her email so that after the form-submit an email is sent to him/her.
    If this is not what you are referring, please provide more detail and write back
    Thanks,
    Lucia

  • HT2508 My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB

    My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB in?

    AFAIK cameras offer their own built-in format utility for inserted SD cards.  You should use that.  Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly.  Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
    Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan.  I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

  • Hello I would like to know how I can change the form of payment of App store for buying books I

    I would like to know how I can chage the form of payment of App store for buying books

    http://support.apple.com/kb/ht1918?viewlocale=de_de

  • How to export only the form field data in an XFA form when data connection is used

    I have used xml data connection to populate the values in the dropdown. The data to be loaded into the DropDown is very large , So I have used data connection using xml scheme.
    Then I used export data functionality to export all fields in the form to xml.Insead of exporting all the fileds it just export the values of the dropdown which has been binded through Xml Schema.
    I am not having the licenced version of Adobe Life Cycle. Could you help me solving this issue ? I just want both the data binding and the export data functionality.
    Thanks & regards,
    Karthikeya

    If you could use the below command you can get all the field values from the form.
    xfa.data.saveXML("pretty");
    Thanks
    Srini

  • Infopath: Rules run before Code...So Can we close the form through Code?

    Hi,
    I have a form with a couple of buttons. Clicking on any of the buttons first executes the RULES and then jumps to execute the code in the FormCode.cs file for the button click event. However, if I have "Close the Form" as one of the Rules for the button, the code does not execute. So, is there a way that I can close my Infopath fom after executing the code instead of closing from the RULES? Also "The form has been closed" is the message which pops up after closing form through rules. Can we redirect to the form library instead of showing this message?
    I tried to execute everything through code in FormEvents_Submit. It works fine if I have a single submit button. But how would i differenciate if there are multiple buttons like Approve, Reject etc.
    Thanks !

    Hi Aanu,
    Thanks for the reply.The proposed solution in the thread is to use;
    this.Application.ActiveWindow.Close();
    or
    thisXDocument.View.Window.Close(true) in order to close the form.
    Both of them don't work when I try to use them in Visual Studio. It complains of a missing namespace.
    Did this approach work for anyone?

  • How to print out the Forms and Table fields relationship, data mapping?

    I create a forms and tables relationship inside the Form Developer 11g, once I created the Data relationships between the form data field and the Table column name. I don't have any command to print it out, such as Layout Wizard.
    Are there any programs on Windows platform can print it out?

    hi all,
    i have try to do this
    public static void Readbinary() throws Exception
              String file = "D:\\05-09.190501+0800";
              DataInputStream dis = new DataInputStream(new FileInputStream(file));
              //but then how to read the content ??????can you give me more hint ?????
    i have find the netflow v5 structure by C
    struct NFHeaderV5{
    uint16_t version; // flow-export version number
    uint16_t count; // number of flow entries
    uint32_t sysUptime;
    uint32_t unix_secs;
    uint32_t unix_nsecs;
    uint32_t flow_sequence; // sequence number
    uint8_t engine_type; // no VIP = 0, VIP2 = 1
    uint8_t engine_id; // VIP2 slot number
    uint16_t reserved; // reserved1,2
    struct NFV5{ 
    ipv4addr_t srcaddr; // source IP address
    ipv4addr_t dstaddr; // destination IP address
    ipv4addr_t nexthop; // next hop router's IP address
    uint16_t input; // input interface index
    uint16_t output; // output interface index
    uint32_t pkts; // packets sent in duration
    uint32_t bytes; // octets sent in duration
    uint32_t first; // SysUptime at start of flow
    uint32_t last; // and of last packet of flow
    uint16_t srcport; // TCP/UDP source port number or equivalent
    uint16_t dstport; // TCP/UDP destination port number or equivalent
    uint8_t pad;
    uint8_t tcp_flags; // bitwise OR of all TCP flags in flow; 0x10
    // for non-TCP flows
    uint8_t prot; // IP protocol, e.g., 6=TCP, 17=UDP, ...
    uint8_t tos; // IP Type-of-Service
    uint16_t src_as; // originating AS of source address
    uint16_t dst_as; // originating AS of destination address
    uint8_t src_mask; // source address prefix mask bits
    uint8_t dst_mask; // destination address prefix mask bits
    uint16_t reserved;
    but how to translate the structure to java,then get the data from the file ?
    Edited by: 903893 on Dec 21, 2011 10:52 PM

  • How do I make the form/pdf fit to one page?

    I designed my first form today and it's two pages long.  How do I get it all to fit on one page?  It will be saved as a pdf.

    While designing the form it will help to be in Page View.  This gives a very close approximation to how your fields will appear in the resulting pdf.  In the Design tab use menu View-> Page View.  All page breaks will now appear as dotted lines.  To aid in fitting more fields you can place forms side by side or reduce the font size.  Eliminating the Header also helps.
    Jeff Canepa
    Software Quality Engineer
    Adobe Systems, Inc.
    [email protected]

Maybe you are looking for