How to restrict or check values of field type drop down in context level

Hi All,
I need to know how Context Binding String option technique works for field in context node,
the code at Get_V is like below,
      CREATE OBJECT lr_descr EXPORTING iv_source_type = 'B'.
      lr_descr->set_binding_string( '//Ident/Values' ).
      rv_valuehelp_descriptor = lr_descr.
I seen Ident context node in this view, under attributes it don't have any values,
but it is of class type CL_BSP_WD_CONTEXT_NODE_DDLB,
so where he moving values or how this technique works...?
Thanking you.
Best Regards,
VjMhyd

Self,
SET_VALUE_TABLE
Edited by: vjmhyd on Jun 29, 2011 3:31 PM

Similar Messages

How to change the attribute of screen field to drop down list dynamically

Hi All,
Col X                   Col Y
A                        input field
B                       drop down list
This is a tabular disply where the Screen field attribute for Col y is NO DROP DOWN BOX.
My requirement is to change the attribute of COl Y to DROP DOWN list depending on the value of
COL X dynamically.

Dear Ajay,
Actually this requirement is to enhance the standard screen for Tcode :EHSVU21.
So depending on the 1st Column(Test no) value ,i have to change the 3rd Column(Low.norm.result)
property either to DROP Down or not.
So in the PBO only the changes to be made and there is no field in SCREEN internal table for changing the attribute to DROP down. I checked SCREEN internal table where the field VALUE_HELP and REQUEST is useful but not suitable for my case.
Any solution available?

How to get the selected value/key of a drop down list box in webdynpro Java

Dear SDN Members,
I have added some static data into a drop down list box by key UI element using the procedure specified in value help tutorial.
Now i want to display the value selected in a dropdown list box on view whenever i select an item in a dropdown list box.
Can any one put here the code part relating to this.
Your help will be awarded.
Thanks in advance,
Regards,
Sireesha.B

Hi Sireesha,
You want to display value based on the key selected in dropdown list. If you want to do like that
1) Create a context attribute for ex: key_value
2)In the properties of the attribute select the calculated as true.
3)It will create getter and setter methods for your attribute.
4)Go to implementation add the following code in getter method of your attribute
String attributeName = IPrivateCreate.IContextElement.KEY;
//KEY is your dropdown key attribute not the value attribute.
IWDAttributeInfo attributeInfo = element.node().getNodeInfo().getAttribute(attributeName);
ISimpleTypeModifiable simpleType = attributeInfo.getModifiableSimpleType();
IModifiableSimpleValueSet valueset = simpleType.getSVServices().getModifiableSimpleValueSet();
Object key = element.getAttributeAsText(attributeName);
return valueset.getText(key);
Regards
Suresh

How to restrict the particular value in BEx?

HI,
I have added particular dimension in query prompt. While refreshing i got more value in particular dimension. How to restrict the the value in bobj or bex?
Here i attached the screen shot. Please find the attachment.

Hi Mani,
Please make sure of your requirement. If you are using only one single query for multiple reports then i strongly recommend the below criteria or else it better to restrict the value in the BEx itself if you have no other reports on the same BEx query.
If you are trying to restrict a report to a default prompt value then use equal to in query filter prompt or you can also restrict them to list of values i.e multiple values.Please follow as per the screens below. I am mentioning two ways.
Method:1
Step 1: Click on Prompt Options(Blue Questionmark Symbol)
Step: 2 : Click on the Values after you check the prompt properties options as shown below.
Step 3: Search for values if they are keys by checking the "Search in keys" or else not required.
Method 2: Here is another Easy way is Just give the input in the value box as shown below.
Let me know if you need any further help.
Regards,
Naveen

How to restrict the length of input field

Hi,
How to restrict the length of input field. That is we should not be able to enter more thatn 10 charecters.
Regards,
H.V.Swathi

Hi swathi,
For this you have to create a simple data type. No need of writing a code.
Go to Dictionaries -> Local Dictionary -> Data Type - > Simple Type - > Right click and "Create Simple Type".
Here you should create a Simple type with String as built-in Type. Here you will also see the Length Constraints option.
Set the value of maximum length and minimum length. In your case set the value of maximum length to 10. At runtime this will not allow the user to enter more than 10 characters.
Now create an attribute and bind it to this newly created simple type. Bind the value of the input field with this particular attribute.
Regards
Manohar

How to restrict the duplicate values in lov column of VO based Adv Table

Hi Gurus,
I want to restrict the duplicate values at lov which is a colunm in an Adv Table.
If user enters duplicate values then first it should show an error msg that Duplicate values have been entered.
After the duplicate values have been removed, then the user can save all the values in the table.
My Adv Table is based on a VO.
The link how to restrict the duplicate values at form level
talks about Adv Table based on a EoVO, which doesnot work in my case.
My Approach,
I am iterating through RowSetIterator and committing through PROCEDURE.
I am able to avoid duplicate entry through a function checkRespId. (given below)
Below code is for iterating and committing.
public void saveline(String reqid,String userid)
System.out.println("RequestId/saveline"+reqid);
System.out.println("UserId/saveline"+userid);
OAViewObject vo = (OAViewObject)getRespLineVO1();
RespLineVORowImpl row = null;
int fetchedRowCount = vo.getFetchedRowCount();
RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
deleteIter.setRangeStart(0);
deleteIter.setRangeSize(fetchedRowCount);
for (int i = 0; i < fetchedRowCount; i++)
System.out.println("Inside the for LOOP");
row = (RespLineVORowImpl)deleteIter.getRowAtRangeIndex(i);
String respoidid = row.getAttribute("ResponsibilityId")+"";
String respname = row.getAttribute("ResponsibilityName")+"";
String stdate = row.getAttribute("StartDate")+"";
String enddate = row.getAttribute("EndDate")+"";
String linestatus ="A";
if(userid!=null)
if(!(respoidid.equals("null")) && respoidid!=null)
String checkingrespid=null;
checkingrespid = checkRespId(userid,respoidid);+contains no if not duplicate and yes if its duplicate+
System.out.println("checkingrespid for Resp with ID :"+respoidid+"exists or not "+checkingrespid);
if(checkingrespid.equals("No"))
String message, result = null;
Connection txn = getOADBTransaction().getJdbcConnection();
try
calling PROC ...
catch(Exception e)
message = "Error in Inserting into line" + e;
throw new OAException(message, OAException.ERROR);
else
throw new OAException("You have entered duplicate no. of values", OAException.ERROR);
else
System.out.println("respoidid is null");
break;
deleteIter.closeRowSetIterator();
public String checkRespId(String userid,String respoidid)
String createRow="No";
OAViewObject vo = (OAViewObject)findViewObject("CheckRespVO1");
if (vo != null)
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0, userid);
vo.setWhereClauseParam(1, respoidid);
vo.executeQuery();
System.out.println("ROW COUNT IS "+vo.getRowCount());
if(vo.getRowCount()>0)
createRow="Yes";
else
createRow="No";
return createRow;
Problem:
I remove the duplicate entries and click on save and get this error.
Unable to perform transaction on the record. \nCause: The record contains stale data. The record has been modified by another user.
\nAction: Cancel the transaction and re-query the record to get the new data.
Thanks,
Sombit

Hi Anil,
I am trying out your code but stuck in inserting the rows
using your code in URL: http://oracleanil.blogspot.com/2010/09/oaf-passing-table-type-object-to-oracle.html
I am always getting the same exception i.e COde blast in when I run.
My modified code is:
String[] as = null;
Number[] vNumber = null;
Number[] vNumberrespid = null;
Number reqidnumber = null;
reqidnumber = new Number(Integer.parseInt(reqid));
Connection txn = getOADBTransaction().getJdbcConnection();
String mCreateSearchRequestStatement = null;
OAViewObject vo = (OAViewObject)findViewObject("RespLineVO1");
int j = vo.getFetchedRowCount();
try
System.out.println("abouce try");
vo.reset();
if (vo.getFetchedRowCount() > 0)
System.out.println(String.valueOf("Fetched row count ").concat(String.valueOf(vo.getFetchedRowCount())));
int i = 0;
as = new String[j];
vNumber = new Number[j];
vNumberrespid = new Number[j];
while (vo.hasNext())
vo.next();
System.out.println(String.valueOf("Inisde the do while loop").concat(String.valueOf(i)));
vNumber[i] = (reqidnumber);
vNumberrespid = ((Number)vo.getCurrentRow().getAttribute("ResponsibilityId"));
as[i] = String.valueOf(vo.getCurrentRow().getAttribute("ResponsibilityName")).concat(String.valueOf(""));
System.out.println("Request ID "+reqidnumber[i]);//getting null even there is some value selected
System.out.println("ResponsibilityId "+vNumberrespid[i]);//getting null even there is some value selected
System.out.println("Resp Name "+as[i] );//getting null even there is some value selected
i++;
CallableStatement cs = txn.prepareCall("{call XX_PassTableType.XX_PassTableType_prc(:1, :2,:3)}");
ARRAY array = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumber);
ARRAY arraynew = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumberrespid);
ARRAY array1 = new ARRAY(new ArrayDescriptor("APPS.JTF_VARCHAR2_TABLE_100", txn), txn, as);
cs.setArray(1, array);
cs.setArray(2, arraynew);
cs.setArray(3, array1);
cs.registerOutParameter(3, 2003, "JTF_VARCHAR2_TABLE_100");
cs.execute();
ARRAY error = null;
error = (ARRAY)cs.getArray(2);
if ((error != null) && (error.length() > 0))
System.out.println(String.valueOf("Error is ").concat(String.valueOf(error.getArray())));
String[] retError = new String[j];
retError = (String[])error.getArray();
System.out.println(String.valueOf("Error in saving data").concat(String.valueOf(retError[0])));
cs.close();
catch (Exception exception)
throw new OAException("code blast", OAException.ERROR);
Thanks,
Sombit

How to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL)

Hi Experts,
Can you please tell me to how to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL) when saving of the shipment document.

shipment cost calculation only on the Leg level and not on header level. Currently a lot of confusion happened after creating the shipment cost document and found that the status is u201CBu201D.
now we intend to define detailed specifications to how to create this new user exit to update the shipment cost relevancy at shipment header.
The main functionality of the user exit to be created is to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL).can u pls tell how to do this.

How can I add a blank value in a standard drop down list

Hello,
I have a requirement to add a blank value into the standard drop down list of for i.e. the search criteria
"created on" -> (values are: yesterday/today/last week etc).
The problem is, that this field has always the default value "yesterday" but our customer wants to have a blank field as default.
Can anybody provide me steps how can I add this blank value ?
Many thanks in advance

Hi Bernard,
thanks for your reply.
Its for quotation.
Could you give me still some further detail steps, please ?
Many thanks
Andreas

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to capture the value selected in the drop down box

Hi all,
I am populating values in drop down box by using FM vrm_set_values in module pool.
like below
01 ABC
02 ACB
03 BCA
04 CAB
in module pool drop down box element name is RQGM-VALUE.
Problem is what ever the value is select in the drop down box from above element RQGM-VALUE is not filling any value.
i need to capture the value selected in the drop down box and pass it to another variable.

Hi,
Refer this standard code. Your issue will be resolve.
REPORT demo_dynpro_dropdown_listbox.
TYPE-POOLS vrm.
DATA: name TYPE vrm_id,
      list TYPE vrm_values,
      value LIKE LINE OF list.
DATA: wa_spfli TYPE spfli,
      ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
TABLES demof4help.
name = 'DEMOF4HELP-CONNID'.
CALL SCREEN 100.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE init_listbox OUTPUT.
CLEAR demof4help-connid.
SELECT connid cityfrom cityto deptime
    FROM spfli
    INTO CORRESPONDING FIELDS OF wa_spfli
   WHERE carrid = demof4help-carrier2.
    value-key = wa_spfli-connid.
    WRITE wa_spfli-deptime TO value-text USING EDIT MASK '__:__:__'.
    CONCATENATE value-text
                wa_spfli-cityfrom
                wa_spfli-cityto
                INTO value-text SEPARATED BY space.
    APPEND value TO list.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            id     = name
            values = list.
ENDMODULE.
MODULE user_command_100.
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'CARRIER' AND NOT demof4help-carrier2 IS INITIAL.
    LEAVE TO SCREEN 200.
ELSE.
    SET SCREEN 100.
ENDIF.
ENDMODULE.
MODULE user_command_200.
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'SELECTED'.
    MESSAGE i888(sabapdocu) WITH text-001 demof4help-carrier2
                                        demof4help-connid.
ENDIF.
ENDMODULE.

I have made one field as drop down in web ui. there are 3 values in drop down suppose a, b , c.

i have made one field as drop down in web ui. there are 3 values in drop down suppose a, b , c.
now i want to make c value as default value in drop down what to do?

Hello Bala,
you can find number of discussions regarding this on SCN.
Search and do code in DO_INIT_CONTEXT method of view to set the value in entity.
lr_entity ?= me->typed_context->context_node_name->collection_wrapper->get_current( ).
lr_entity->set_property( iv_attr_name = 'Attribute_name' iv_value = 'value' ).
Regards Harish Kumar

How do I add "Save As" to the Pages drop down menu?

How do I add "Save As" to the Pages drop down menu?

It took me awhile but I found what I was looking for. This is posted at http://www.tuaw.com/2012/07/29/get-save-as-back-on-mountain-lions-file-menu-easi ly-and-without/
Option 1. Terminal.app If you are comfortable using Terminal.app, you can add a different keyboard shortcut this with one simple line. First, quit all your apps except Finder and Terminal. Then paste this command (as one line) into Terminal.app (and press Return):
1
defaults write -globalDomain NSUserKeyEquivalents -dict-add 'Save As...' '@$S'
view rawdwrite-global-saveas.sh hosted with ❤ by GitHub
That's it!
Launch TextEdit and open the 'File' menu and you should see "Save As..." back in its rightful spot with its original Command + Shift + S shortcut, as shown in the image above.
Aside: After you enter the 'defaults write' command, you will not see any confirmation that it was entered correctly. Terminal.app is a little terse sometimes. If you want to verify it from the command-line, enter this:
defaults read -globalDomain NSUserKeyEquivalents
and look for "Save As..." = "@$s"; in the output.
Option 2. System Preferences.app If you would rather not use Terminal, it's still very easy to add the keyboard shortcut.
Launch the System Preferences.app, then open the "Keyboard" preference pane.
At the top you will see "Keyboard" and "Keyboard Shortcuts" – click "Keyboard Shortcuts" (labeled '1' below). Then in the list on the left side, click "Application Shortcuts" (labeled '2' below). Then click the "+" button (labeled '3' below):
Once you press that "+" button, a small window will appear asking you to enter the title of the menu item and the keyboard shortcut that you want to use.
Enter "Save As..." in the "Menu Title:" field, and then press the keyboard shortcut that you want to use. In the example below I pressed Command + Shift + S:
Note: It used to be true that you had to enter an actual ellipsis (which you can get by pressing Option+ ; on a US-English keyboard). However, when I tested this in Mac OS X 10.8.2, it worked with three consecutive periods.
Bonus Tip: Hide the "Duplicate" menu item.
In my original article I suggested that you also enter a keyboard shortcut for "Duplicate" and while youcan do that if you wish, you do not need to do that.
However, if you would like to hide the Duplicate menu item, you can do that. There are two steps: first, remap "Save As..." to Command + Shift + S (as shown above). Then the 'trick' is to remap "Duplicate" to Command + Shift + Option + S.
What you will have done is swap the keyboard shortcuts for "Duplicate" and "Save As..." which means that OS X will make "Duplicate" the optional command. If you open the "File" menu and hold down "Option" the "Save As..." command will change to "Duplicate"
(Thanks to TUAW reader 'rbascuas' for pointing this out in response to the original article!)
Important Addendum: "Keep changes in original document"
As we reported in August 2012, the "Save As..." command in early versions of 10.8 had an unexpected and likely unwanted side effect in Mountain Lion: it would save the changes in the new document (created by "Save As...") but would also save the changes to the original document.
However, Apple realized that users might not want that behavior, so in Mac OS X 10.8.2 they added an option "Keep changes in original document" which you can see here:
Option A: If you want to save the changes you've made in the document and then save the document with a different name, then make sure that the box is checked.
Option B: If you want your original document to stay as it was when you last saved it and create a new document based on the modified content of that document, then make sure that box is not checked.
If you do not see the 'Keep changes in original document' box, then the application is probablygoing to give you the "Option B" behavior, but if you are not sure, I would suggest choosing Cancel in the "Save" dialog, then copy and paste the contents of the document into a new file, and save the new file. I know that's several extra-and-less-convenient steps, but if you are worried about preserving the original document, better safe than sorry.
You could also save the file, duplicate it in Finder, and rename the new instance. Open old file and revert to previous save using 'Versions'.
Frankly,I wish that Apple had just left the "Save As..." command alone, but for some reason they didn't ask my opinion. That said, I'm glad that they brought it back in Mountain Lion. I would have paid $20 for that feature alone.
Note: This article was re-written and republished on 2013–02–21. The original process still works, but I wanted to update it to reflect some additional information.

Cond display of drop down based on value selected in another drop down form

Hi,
I have a requirement in my app in which I need to be able to conditionally display the values in the drop down down list based on the values selected in another drop down list...
Currently I have 2 drop downs.
First drop down is a list of Jacks from 2000 to 4999...
Second Drop down consists Chassis ranging from 1 to 900..
So when a user selects any jack between 2000 - 2999, in the second drop down only Chassis ranging from 1 to 300 should appear.
when anything between 3000 - 3999 is selected, Chassis ranging from 301 to 600 should appear..
and for jacks between 4000 - 4999, Chassis ranging from 601 to 900 should appear in the second drop down.
Can someone please provide me pointers on how to do this..
Thanks,
Nehal

Hi Larry,
Thanks for your response..
Here are the queries for my select lists.
P62_JACK
select list query for Jacks:
select JACK_NUM display_value, JACK_NUM return_value
from CTS_LIST_OF_JACKS
order by 1
P62_CHASSIS_BLADE_PORT
select NETWORKPORT display_value, NETWORKPORT return_value
from CTS_LIST_OF_NETWORKPORTS
order by NETWORKPORT_ID
jacks range from 2000 to 4000
chassis_blade_port ranges from 100 to 900...
Can you please let me know how to do it..
Thanks,
Nehal

FileChooser - "switch off" file name field and file type drop down choice..

Hi there,
I'm wondering, is there a simple way of not displaying the file name field and file type drop down choice that anyone knows of?
Reason being; my FileChooser is embedded in an application window and does not pop up as a dialog - the users are only acessing one file type, but it could be in any folder on their machine.
many thanks,
Fergus.

Moved to legacy SDK forum

How to restrict AS02 access to certain fields only

How to restrict AS02 (Asset Master Record) access to certain fields only. Currently when you assigned AS02 to a certain user, this will enable the user to change all the fields in the asset master record. Suppose i want only the user to restrict the access to certain field eg.NDJAR (Life in Yrs).
Thanks for your inputs.
Regards,
Robert

hello,
basis has to assign the proper activity with object A_S_ANLKL. in this case they have to allow activity 03 only with combination of Cocode,asset class. see some more details below.
This authorization object is the first part of the object "asset master record."
The definition at this level determines whether the user is authorized to process data in a given company code. The activity type for the transaction is also defined here. This authorization object is used for master data transactions, for the display of value fields, and for reporting.
Defined Fields
The following fields are assigned to the authorization object
Asset class (specified by entering a value in the pop-up window)
Company code (specified by entering a value in the pop-up window)
Activity type - there are three different activity types:
01 = Create
02 = Change (including blocking and deleting)
03 = Display

How to restrict or check values of field type drop down in context level

Similar Messages

Maybe you are looking for