How  to Retreive data from the SAP  by using  BAPI's  through the Web .

Shashi

<copy&paste_and_everything_else_removed_by_moderator>
Edited by: Julius Bussche on Sep 3, 2008 8:54 AM

Similar Messages

  • How to load data from a  flat file which is there in the application server

    HI All,
              how to load data from a  flat file which is there in the application server..

    Hi,
    Firstly you will need to place the file(s) in the AL11 path. Then in your infopackage in "Extraction" tab you need to select "Application Server" option. Then you need to specify the path as well as the exact file you want to load by using the browsing button.
    If your file name keeps changing on a daily basis i.e. name_ddmmyyyy.csv, then in the Extraction tab you have the option to write an ABAP routine that generates the file name. Here you will need to append sy-datum to "name" and then append ".csv" to generate complete filename.
    Please let me know if this is helpful or if you need any more inputs.
    Thanks & Regards,
    Nishant Tatkar.

  • How to transfer data from an account to a new account in the same mac

    How to transfer data from an account to a new account in the same mac (macbook)

    Search these forums for merge accounts and also peruse these:

  • How to exctract data from a report to use it in a process

    Hi! I would like to know how to exctract data from a report to use it in a process. Let's say that I have a report which have following fields: id_person, name_person. And then, I want to make a process which introduce the id_person (from report) into an associative tabel. How can I reffer to the fields from my report?
    I was thinking about something like that( this should be the code from my process)
    insert into associative_table(id_person)
    values(id_person) or
    insert into associative_table(id_person)
    values(Report_name.id_person) but it doesn't work....
    Thank you very much.

    Another option, use collections.
    Create an on load process that loads all the rows you would have in your report into a collection:
    begin
    HTMLDB_COLLECTION.CREATE_OR_TRUNCATE_COLLECTION(
    p_collection_name => 'ASSIGNED_CALENDAR_CONTACTS' );
    for x in (SELECT CONTACT_ID, CONTACT_FNAME, CONTACT_LNAME
    FROM CONTACT
    WHERE InStr( pkg_CalendarMgr.f_FetchContactIDsForDay( TO_DATE( :P3_CALENDAR_DT, 'YYYYMMDD' ), 'OF' ), CONTACT_ID ) > 0 )
    loop
    htmldb_collection.add_member(p_collection_name => 'ASSIGNED_CALENDAR_CONTACTS',
    p_c001 => x.CONTACT_ID,
    p_c002 => x.CONTACT_FNAME,
    p_c003 => x.CONTACT_LNAME);
    end loop;
    end;
    Then, instead of your report selecting from the table, have it select from the collection, this way your display will match what's in the collection:
    SELECT c001, c002 || Chr(32) || c003 CONTACT_NAME, 'Remove' remove
    FROM htmldb_collections
    WHERE collection_name = 'ASSIGNED_CALENDAR_CONTACTS'
    ORDER BY c003, c002
    Then you can have a button on the form that steps through the collection, one element at a time and does whatever you want it to.

  • How to read data from a router by using labview

    I am a  beginner labview. How to read data from a router by using labview ? 

    What kind of data are you trying to read?
    Does the router behave like a webserver that you log into?  If so, search the forums for threads discussing HTML.

  • How to retreive data from a maintainence view?

    Hi all,
    I have used select query to retreive data from a maintainence view. But it gave me a syntactical error that XYZ is not in abap dictionary , it's a database / projection view?
    So can't we get data from a view using select query?
    Please share if u have answers.
    Thanks & regards,
    Chandru

    Hi,
    Maintenance view will be created for database tables only.
    Just display the maintainence from SE11 and click Tables tab in the screen
    Here you can find the list of tables used to created for Maintainence view.
    YOu can use these tables to write SELECT.
    If you give us the maintainence table, we will help you.
    Thanks,
    Ramakrishna

  • How to upload data from excel to form using webutil

    Hi,
    In the sample provided by Oracle
    http://www.oracle.com/technology/products/forms/htdocs/webutil/howto_ole.html
    Note 247606.1 How to Copy Records From a Form Into Excel
    It shown the methods of how to copy data from form to excel but is there any sample to provide the step on how to read the cell from excel into Form in 10g.

    declare
    args client_ole2.list_type;
    application client_ole2.obj_type;
    vworkbooks client_ole2.obj_type;
    vdoc     client_ole2.obj_type;
    vworksheet     client_ole2.obj_type;
    vrange               client_ole2.obj_type;
    begin
    -- create app object
    application := client_ole2.create_obj('Excel.Application');
    client_OLE2.SET_PROPERTY(application, 'Visible','True');
    -- get workbooks object
    vworkbooks := client_ole2.get_obj_property(application, 'Workbooks');
    -- and open a file
    args := client_ole2.create_arglist;
    client_ole2.ADD_ARG(args, 'c:\tp_ae.xls');
    vdoc :=client_ole2.INVOKE_OBJ(vworkbooks,'Open',args);
    client_ole2.destroy_arglist(args);
    -- get a worksheet object
    -- for this to work you need to know the sheet name or its index
    args := client_ole2.create_arglist;
    client_ole2.ADD_ARG(args, 1); <-- name or index
    vworksheet := client_ole2.get_obj_property(vdoc,'Worksheets',args);          
    client_ole2.destroy_arglist(args);
    -- get a range object which in this case is just a cell
    -- for this to work you need to know the cell coordinates
    args := client_ole2.create_arglist;
    client_ole2.ADD_ARG(args, 'B6');          
    vrange := client_ole2.get_obj_property(vworksheet,'Range',args);
    client_ole2.destroy_arglist(args);
    -- and here you get the value
    message(client_ole2.get_char_property(vrange,'Value'));
    -- release objects          
    client_ole2.release_obj(vrange);
    client_ole2.release_obj(vworksheet);
    client_ole2.release_obj(vdoc);
    client_ole2.release_obj(vworkbooks);
    client_ole2.release_obj(application);
    end;

  • How to retreive data from the column of CLOb  dataype in BPEL.

    Hello Everyone,
    I have a scenario in which i have two databses primary and secondary. In first bpel process i am checking if primary database is down then store the payload in temp staging table in secondary database. That payload is getting stored in a cloumn of CLOB datatype in a text format.
    Now in second bpel process when primary is up i have to pull the data from the temp staging table...but here i want the data in the same format (like it came in the first process...the input payload format)....but as the CLOB will store the data as a text then how to reform that data in to ealier payload format.
    Can any one pls suggest me the solution...
    Thanks

    Confirm that you have the VISA Run Time Engine on the target machine. If you do not have it installed, you can install the VISA Run Time Engine from ni.com.
    Error -1073807346 Using VISA When Running LabVIEW Executable On Target Computer
    Message Edited by Mathan on 10-12-2009 07:11 AM

  • How to fetch data from a SAP BW Cube via Perl/PHP on a Linux machine?

    Hi all,
    here's the scenario:
    I need to fetch data from a cube of a remote SAP NetWeaver 7.  The data will later be used in a web application based on  Linux and  Perl/PHP. (I'd prefer using perl for the backend and doing the business logic of the web application.)
    I have:
    A Linux system with all its on-board tools and scripting languages.
    A user for the SAP BW which allows me to logon (very,very limited user rights, no se37,no se80,no rsaX and so on)
    Access to http://<SAP BW Server>:<Port>/sap/bw/xml/soap/xmla with the above mentioned user.
    My questions:
    - Could you please push me into the right direction how I can realize this? E.g. by pointing to tutorials / HowTos / sample code / CPAN modules etc..  (Most information I found so far referred to software based on a different operating system and on remote function calls using custom functions.)
    - I'm aware of the  SAPNW::RFC CPAN module, but do I necessarily have to perform a remote function call? ( If so, is there a "standard" function I could call for accessing a cube?)
    Thanks a lot in advance!

    You can take through the RFCS .check for some system function modules...but why do you need to route it through XI?How huge z the files?

  • How to delete data from hard disk before returning Macbook Air to the store

    I need to return a recently purchased Macbook Air to the store. How do I delete all data from the hard drive before I return the notebook?

    Ahh, you want to WIPE the entire drive,.....command R on startup, disk utilities....select MacIntosh HD,......ERASE it format it in MAC OSX extended journaled.
    after than, you can do a wifi or ethernet reinstall to factory OUT OF BOX new condition.    Usually takes 1.5 to 2 hours if you have a descent fast www connection.

  • How to Retreive data from custom list on specify conditions?

    Hi All,
    I have custom list.And the custom list data contains 100 rows of data.
    my requirement is  how to retrieve custom list data from specific condition like 20-30,50-70.
    Assume that i want to fetch 20 record to 30th record.
    How to use the caml query for the above situation.
    Please assist me.
    Rama

    Hi 
    Thanks for posting your issue, Kindly browse the below mentioned URL to find related the CAML query example
    http://karinebosch.wordpress.com/2012/02/03/caml-and-the-client-object-model/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • How to retreive data from structure MDEZ in T.code CO09

    As per our requirement 2 new columns are needed in a customize report .i.e
    - u201Cinc. lot dateu201D
    - u201Cavailable inc. lotu201D
    u201Cinc. lot dateu201D:to get the values for inc.lot.date
    From second screen of CO09(program: SAPLATP4 and screen number: 400) pick first date where MRP element is u201CPOitemu201D, u201CShpgNtu201D or u201CPrdOrdu201D.
    u201Cavailable inc. lotu201D: to get the values for available inc.lot
    Pick u201CCum. ATP QTyu201D from the same row.
    These data are stored in structure MDEZ. Actually I want dat00 and MNG04 based on field DELB0. If DELB0 filed is POitem or Prdord or ShpgNt then only I should retrieve the dat00 and MNG04. IF there are more than one POitem in MRP element then we should pick the first POitems' mrp date and *** ATP qty  .Can you please help me out how to get these data from the structure MDEZ.
    input parameters to get the values are material number and plant.

    Hi,
    First of all data is never stored in structure so there is no way you can retrive data from structure.
    you are looking into the screen field and it is not mandatory that it will always point to a table.
    Now  the qestion remains how to get the data ?  you need to find database table for that field there are many ways like SE84 or SE11 where used etc.
    Try to find the table if you still have the problem feel free to get back.
    Regards
    Bikas

  • How to retreive data from a field that contains a "|" symbol

    Hi,
    Hopefully my title won't confuse anyone .
    Well I am trying to create a group which would display an employee name(s).
    In my case, the value comes from a field which can contain multiple values separated by a "|" symbol. See picture below.
    I am pretty sure I will have to write a formula for this but simply don't know where to begin or how to write it.
    Table use in this example is "ProductionProjectGroups" and will be linking this table to the "Employees" table which will display the actual employee name.
    Does anyone knows how to display data if there is a "|" symbol in the field?
    If you request more info please let me know.
    Thank you in advance for the help.
    Joe

    Hi Abhilash,
    I am looking for help on how to extract the employee's name from this field.
    I have also posted more pictures with details as requested.
    Thank you
    Joe

  • How to pass data from a C++ program to LV to plot the data real time?

    Hello,
    I am writing a C++ program in which I need to plot the data in real
    time. I would like to pass data from my C++ program to LabView in order
    to perfrom the plotting. I was wondering if this is possible. If so,
    how can it be done? .
    Thank You

    There are several C++ examples and application notes here.

  • How to retreive data from a table and a structure

    Hi experts,
    I have a requirement to create an ALV report. I have to include fields from two tables 'PA0001' and 'CATSDB' and from one structure 'CATSAPPR'. I am able to retrieve data from tables using INNERJOIN. But i have no idea how to deal with Structure.
    I know that structure does not contain any data.
    But  i am not able to find any transparent table which has field 'ORDERTEXT' . I found field 'ORDERTEXT' only in structure 'CATSAPPR'.
    So please anyone tell me, either any transparent table which has field 'ORDERTEXT' or please tell me how to deal with structure, in this case.
    Please help me,
    Thanks in advance
    Anu

    check this
      Table-Fields                     Short descriptn
      AUFK- KTEXT          Order master data
    COCH- KTXT              Process Management: Control Recipe Header
    COCHP- KTXT             PI sheet: Control Recipe Header
    COMPHDR- KTEXT    OCM: Comparison results, indiv. records for order headers
    HIKO- KTEXT              Order master data history
    MAAVC_MDO-  KTEXT      MPO: Individual Master Data for Orders
    MCHPVS- AUFTEXT                           Batch Record: Shadow Table for Link to Archive
    OCMHOMO_ARCH- KFELD          Backup Table of Homogeneity List in Case of Archiving
    PSJHIEDATA- KTEXT                       Hierarchy data to test LDB PSJ
    TEWOCODEST- DESCRIPTION                      Order Codes (Texts)
    TEWOCODET- KTEXT           Allocation of Message Codes to Order 
    VLCSMORDER- KTEXT                                                   VELO : Service Order
    VSAUFK_CN- KTEXT               Version: Order master data
    Yogesh N

Maybe you are looking for