How to retrieve column name from Excel using POI HSSF eventusermodel?

Hi ,
I am simply reading the excel sheet and writing in a txt file. I have done the following in the switch construct. It works fine but I want to retrieve only the column header. But this code gives me all available strings in the excel sheet. Any pointer would be greatly appreciated.
case SSTRecord sid :
         SSTRecord sstrecord = (SSTRecord) record;
         for (int i=0; i<sstrecord.getNumUniqueStrings(); i++){
              System.out.println(" Column name" + sstrecord.getString(i));
break;bye for now
Sat

try labels:
        case LabelSSTRecord.sid:
            LabelSSTRecord lrec = (LabelSSTRecord) record;
            if (lrec.getRow() == 0) {
                System.out.println(" Column name "
                        + sstrec.getString(lrec.getSSTIndex()));
            break;

Similar Messages

How to retrieve user name from a given Subject?

I am in a situation where I need to retrieve user name from the Subject that is populated when user logs in. I have the active Subject and I do following to get the principals in the subject and iterate through them:
Set principals = subject.getPrincipals();
Iterator ite = principals.iterator();
while (ite.hasNext()) {
Principal prin = (Principal)ite.next();
String name = prin.getName();
But this contains all the principals, including user name, roles, password, etc. How do I programmatically determine which one is user name?

Don't you have different principal types? I am making a jaas module and I have different principals for roles, groups etc. I think of principals as attributes, the type in the attribute name and the principal name is the attribute value.
To get all the principals of the type SomePrincipal, you can use:
Set principals = subject.getPrincipals(SomePrincipal.class)
You can also take som principal an test wether it is an instance of som type:
if (Principal p instanceof SomePrincipal){..}
An other solution which might be better if you have many different attributes is to store both attribute name and value in the name of the principal.
If "mark" is a username the principal name will be "username:mark" el.
Then it will be easy to find the username.

File information -- How to retrieve file name from header variable

Hi
I am using File Adapters to read files(.xml) and then I need to perform some database operations.
One of the requirement is storing the file name read into the DB.
I searched through the forum and got the information on how to configure this in the header variable. The link below shows the same.
File Adapter
Now, I use the XSL mapper to map the source values(from input xml file) to the corresponding table column names. So how should I get the value of the file name.
I saw some of the in-built functions to be used for this but there is not enough documentation to proceed.
Can anyone please provide some solution on this.
/Kiran.

Hi,
Here are the steps that you need to do after you have declared the variable.
1) The variable that you have declared should have the following elements
a) Filename
b) Directory
2) Use the assign activity to copy the value of the filename part of this variable to the arg that needs to be passed to the database. (most probably an invoke variable).
If you still have any problems implementing this, mail me at [email protected]..and i'll send you the screen shots for the entire process.
ciao,
Gunjan

How to retrieve column names in a query in a case sensitive way

Given a query, I want to extract all the column names/aliases in the query in a case-sensitive way.
When I use dbms_sql.describe_columns() or java.sql.ResultSetMetaData classes getColumnName() or getColumnLabel()
it returns the columns name ONLY in Upper case.
My application needs to extract the column names in the same case as it appears in the query string.
Is there any API to get this without parsing the SQL query string?
Thanks
PS: The dbms_sql.describe_columns() returns the column name in upper case.
declare
IS
l_column_recs DBMS_SQL.DESC_TAB;
l_cur NUMBER;
l_column_count NUMBER;
BEGIN
l_cur := dbms_sql.open_cursor;
dbms_sql.parse(l_cur, 'select target_type from targets', dbms_sql.NATIVE);
dbms_sql.describe_columns(l_cur, l_column_count, l_column_recs);
FOR i IN l_column_recs.FIRST..l_column_recs.LAST
LOOP
dbms_output.put_line(l_column_recs(i).col_name);
end loop;
end;
/

As far as the result set is concerned, though, the column name is in all upper case. If you query the data dictionary, you would see that the TARGET_TYPE column in the TARGETS table is stored in upper case.
The way Oracle works is that column names that are not enclosed in double-quotes are converted to upper case in the data dictionary and elsewhere and then Oracle looks for the column name in the table definition. That is what allows Oracle to have case-insensitive identifiers unless a user specifies case-sensitive identifiers by enclosing the identifier in double quotes.
If you changed the query to be
SELECT target_type as "target_type"
FROM targetsOracle should report the alias in a case sensitive fashion because you've now indicated that the alias should be treated as case sensitive.
Justin

How to set column names when not using object of row data in constructer

hello i am using JTable constructer as
public JTable(int numRows,
int numColumns)
can i set column names for the columns .How?

hi,
sure you can: Create a subclass of DefaultTableModel and overwrite the method public String getColumnName(int) which returns the column name of a specific column. Then use this subclass as the data model for the table.
best regards, Michael

Retrieving Column Names from a Query

I need to be able to generate XML that looks like this:
<Categories>
<Category Name='Arrivals'/>
<Category Name='Departures'/>
<Category Name='Unused'/>
<Category Name='Out of Commission'/>
</Categories>
Where the name attribute value is the name of columns in a query. For example, a standard SQL query might look something like this:
select
year, arrivals, departures, unused, out_of_commission
from
some_table
I am able to generate the XML that represents the data just fine. However, my vended application is requiring this column header information. I've browsed and searched the XMLDB documentation but could not see a way to retrive the column names returned by the query. I think I Just need to be pointed in the right direction.
Thanks,
Steve

What technique are you itending using to generate the XML ?.
Does something like this work
select xmlelement("Categories",
xmlelement("Category", xmlattributes('Arrivals' as "Name"), Arrivals),
xmlelement("Category", xmlattributes('Departures' as "Name"), Departures),
xmlelement("Category", xmlattributes('Unused' as "Name"), Unsused),
xmlelement("Category", xmlattributes('Out Of Commission' as "Name"), Out_of_Commission)
from some_table

How to randomly select data from excel using labview.

A very good day to all. I am actually working on a system that will be selecting integer number from randomly generated set of number. If that wouldnt be possible, I would like the system to be able to select number from the set of numbers which have already been randomly generated from excel. kindly help me with the solution. To make myself clear, supposing I have set of numbers from 1 to 10, I want a labview setup that will be picking these numbers one after the other either with replacement or without from excel or self generated. I know this is possible in matlab but would prefer labview if possible. Thanks
Solved!
Go to Solution.

Most, if not all, of the languages I've run across have a rand() function that returns a random number between 0 and 1. Getting some other range is up to the programmer. Usual method is to multiply by the range you need and add an offset to adjust the mean. For instance if you need a random number between 200 and 300 the formula might look like " rand()*100+200 ". If you need an integer, you can use the round function (which will leave it as a float with no decimal pportion) or the conversion (to int). All of this is doable and straightforward in LabVIEW. Have a look: http://digital.ni.com/public.nsf/allkb/FCCDCD678EEF3A9186256D7B008054F5
If you feel more comfortable pulling from a file, try this: http://digital.ni.com/public.nsf/allkb/C944B961B59516208625755A005955F2

How to retrieve Host Name from reports?

Hi.
I've a report with excel template with links inside (XDO_LINK_?...)...
How can I create a link with a dynamic host name? Like http://<hostname>/xmlpserver/.....
Thank you
R.

I've found this:
https://blogs.oracle.com/xmlpublisher/entry/creating_dynamic_urls_in_your
how can I use this method in EXCEL template?
thanks, R.

How to retrieve data dynamically from db using db adapter in 11.1.1.4 jdev?

in my bpel process,i am invoking db by passing a variable which is there in db table.with that variable, iam trying to retrieve data.But i don't know the code for dynamic retrieval.I am a fresher.So please help me .

Hi',
I think you are trying to do this "select empName from emp where empID=$empid" and the $empid should dynamically come.
check this http://kr.forums.oracle.com/forums/thread.jspa?threadID=674513
-Yatan

How to retrieve distinguished name from EndpointContext?

I am building a web service on OAS10.1.3 that uses X509 authentication and LDAP as the security provider in its security configuration. I would like to extract the authenticated user's identity in the form of its full distinguished name, but the ServletEndpointContext API only returns the common name of the authenticated user.
Here is a simplified version of the code I am using to get the user's distinguished name:
public class MyService implements javax.xml.rpc.server.ServiceLifecycle {
private javax.xml.rpc.server.ServletEndpointContext context;
public void init(Object obj) throws javax.xml.rpc.ServiceException {
context = (javax.xml.rpc.server.ServletEndpointContext)obj;
public String helloUser(String message) throws java.rmi.RemoteException {
java.security.Principal principal = context.getUserPrincipal();
return principal.getName();
public void destroy() {
context = null;
context.getUserPrincipal only returns the common name in my application. I suspect that there is some security handler deployment descriptor that I do not have configured correctly, but can't seem to locate the correct documentation. Any help is greatly appreciated,
Dayn

I figured this out. Apparently, the concrete class implementing the Principal interface is not one of the known implementing classes such as X500Principal, but rather an undocumented (at least I can't find any) class: oracle.security.jazn.oc4j.JAZNUserAdaptor. Once the jazn.jar is added to my JDeveloper project properties, I can access the methods. Here is a code snippet:
public String getDN(ServletEndpointContext ctx) {
String principalDN = "Unknown";
Principal principal = null;
if (ctx != null) {
principal = ctx.getUserPrincipal();
if (principal != null) {
principalDN = principal.getName();
if (principal instanceof JAZNUserAdaptor) {
JAZNUserAdaptor user = (JAZNUserAdaptor)principal;
principalDN = user.getRealmUser().getFullName();
return principalDN;
}

How to retrieve the data from SAP-BAPI by using VB Code

Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
    oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
    oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
    oZEmp_Header.Value("ADDR1") = txtAddr1.Text
    oZEmp_Header.Value("ADDR2") = txtAddr2.Text
    oZEmp_Header.Value("CITY") = txtCity.Text
    oZEmp_Header.Value("PHONE") = txtPhone.Text
    boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
    x = oreturn.Value("Message")
    If x = "" Then
        MsgBox "Transaction Completed!..."
    Else
        MsgBox x
    End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.

I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
    SapConnection.logoff
    SAPLOGIN = False
Exit Sub
LogoutFehler:
    If Err.Number = 91 Then
        Exit Sub
    Else
        MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
    End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
   Set FunctionCtrl = CreateObject("SAP.Functions")
   Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
   SapConnection.Client = "010"
   SapConnection.Language = "EN"
   SapConnection.System = "PR1"
   SapConnection.SystemNumber = "00"
   'SapConnection.Password = ""
   SapConnection.GroupName = "PR1"
   SapConnection.HostName = "168.9.25.120"
   SapConnection.MessageServer = "168.9.25.120"
     If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
         Set SapConnection = Nothing
         DoCmd.Hourglass False
         MsgBox "No connection to SAP R/3 !"
         SAPLOGIN = False
         SAPLOG = False
         Exit Function
      End If
    SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
    If Not SAPLOGIN Then
        If Not SAPLOG() Then
            MsgBox "No connection to SAP !", 16
            SAPLOGOUT
            Exit Function
        End If
    End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
    If func1.exception <> "" Then
        MsgBox "Communication Error with RFC " & func1.exception
    End If
    DoCmd.Hourglass False
    SAPLOGOUT
    Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
    MatDescr = "PART NO. NOT FOUND"
End If
End Function

Retrieve Operation Name from WSDL

Hi All,
In a text box any WSDL can be given as input but its operation name should be displayed in a combo. Let me know how to retrieve operation name from WSDL. I want the java coding to be written in backing bean class.
Thanks,
Maanickka.

Hi,
the reference to a WSDL file produces a XML document to be returned. So you need to parse that document for methods. Have you tried this?
Frank

How to Select data using same column name from 3 remote database

Hi,
Can anyone help me on how to get data with same column names from 3 remote database and a single alias.
Ex.
SELECT *
a.name, b.status, SUM(b.qty) qantity, MAX(b.date) date_as_of
FROM
*((table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3)a,*
*(table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3)b)*
WHERE b.dept = 'finance'
AND a.position = 'admin'
AND a.latest = 'Y' AND (b.status <> 'TRM') AND b.qty > 0;
GROUP BY a.name, b.status ;
NOTE: the bold statements is just an example of what I want to do but I always gets an error beacause of ambiguous columns.
Thanks in advnce. :)
Edited by: user12994685 on Jan 4, 2011 9:42 PM

user12994685 wrote:
Can anyone help me on how to get data with same column names from 3 remote database and a single alias.Invalid. This does not make sense and breaks all scope resolution rules. And whether this is in a single database, or uses tables across databases, is irrelevant.
Each object must be uniquely identified. So you cannot do this:
select * from (table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3) a3 objects cannot share the same alias. Example:
SQL> select * from (dual, dual) d;
select * from (dual, dual) d
ERROR at line 1:
ORA-00907: missing right parenthesisYou need to combine the objects - using a join or union or similar. So it will need to be done as follows:
SQL> select * from (select * from dual d1, dual d2) d;
select * from (select * from dual d1, dual d2) d
ERROR at line 1:
ORA-00918: column ambiguously definedHowever, we need to have unique column names in a SQL projection - so the join of the tables need to project a unique set of columns. Thus:
SQL> select * from (select d1.dummy as dummy1, d2.dummy as dummy2 from dual d1, dual d2) d;
DUM DUM
X X
SQL> I suggest that you look closely at what scope is and how it applies in the SQL language - and ignore whether the objects referenced are local or remote as it has no impact to fundamentals of scope resolution.

How to pull only column names from a SELECT query without running it

How to pull only column names from a SELECT statement without executing it? It seems there is getMetaData() in Java to pull the column names while sql is being prepared and before it gets executed. I need to get the columns whether we run the sql or not.

Maybe something like this is what you are looking for or at least will give you some ideas.
        public static DataSet MaterializeDataSet(string _connectionString, string _sqlSelect, bool _returnProviderSpecificTypes, bool _includeSchema, bool _fillTable)
            DataSet ds = null;
            using (OracleConnection _oraconn = new OracleConnection(_connectionString))
                try
                    _oraconn.Open();
                    using (OracleCommand cmd = new OracleCommand(_sqlSelect, _oraconn))
                        cmd.CommandType = CommandType.Text;
                        using (OracleDataAdapter da = new OracleDataAdapter(cmd))
                            da.ReturnProviderSpecificTypes = _returnProviderSpecificTypes;
                            //da.MissingSchemaAction = MissingSchemaAction.AddWithKey;
                            if (_includeSchema == true)
                                ds = new DataSet("SCHEMASUPPLIED");
                                da.FillSchema(ds, SchemaType.Source);
                                if (_fillTable == true)
                                    da.Fill(ds.Tables[0]);
                            else
                                ds = new DataSet("SCHEMANOTSUPPLIED");
                                if (_fillTable == true)
                                    da.Fill(ds);
                            ds.Tables[0].TableName = "Table";
                        }//using da
                    } //using cmd
                catch (OracleException _oraEx)
                    throw (_oraEx); // Actually rethrow
                catch (System.Exception _sysEx)
                    throw (_sysEx); // Actually rethrow
                finally
                    if (_oraconn.State == ConnectionState.Broken || _oraconn.State == ConnectionState.Open)
                        _oraconn.Close();
            }//using oraconn
            if (ds != null)
                if (ds.Tables != null && ds.Tables[0] != null)
                    return ds;
                else
                    return null;
            else
                return null;
        }r,
dennis

How to get only column names from different tables as single table columns

Hi All,
I have one requirement in which we want only column names from different tables.
for example :
I have three tables T1 ,T2, T3 having
col1 clo2 clo3 --> T1 ,
col3 col5 ,clo6 --> T2 ,
Clo6 col8 col9 --> T3
columns i want to get only all Column names from all table as single Resultset not any data from that how can i get that empty resultset
because this empty result i want to bind in datagridview(front end) as Empty resultset
Please tell me anyways to do this
Niraj Sevalkar

If I understand you want an empty result set, just with metadata. SET FMTONLY do the trick:
SET FMTONLY ON
SELECT Col1, Col2, Col3, ....., Coln
FROM
T1 CROSS JOIN T2 CROSS JOIN T3
SET FMTONLY OFF
Another alternative is to include an imposible contition
SELECT Col1, Col2, Col3, ....., Coln
FROM
T1 CROSS JOIN T2 CROSS JOIN T3
WHERE 1 = 0
If you are using a SqlDataAdapter in your client application. You can use the FillSchema method. the select command may be any select statement that returns the columns you want. Under the covers FillSchema will call SET FMTONLY ON.
If you are using SqlCommand.ExecuteReader you can pass SchemaOnly to CommandBehavior argument. SET FMTONLY ON is called under the covers. Again the select command may be any select statement that returns the columns you want.
"No darás tropezón ni desatino que no te haga adelantar camino" Bernardo Balbuena

How to retrieve column name from Excel using POI HSSF eventusermodel?

Similar Messages

Maybe you are looking for