How to return full amount to customer?

The payment on security deposit has been released and applied to the customer's receivables.  Unfortunately, the customer changed his mind and wants the full check refund.   
Paid sec dep = 750
Partially returned - already cleared $175 from March 2008 bill (remaining 575)
Customer called and wants 750 in check refund instead of applying credits to bills
How do you return the full amount (750) to the customer?

Hello,
For the cleared item, reset the amount by using FP07.
Now all your SD amount should be ready for refund.
Ensure that the refund amount posted is 'On Account' payment....Now you can refund the amount....
Not sure about the refund process u'd follow @ u r prj...you can create repayment requests using FPTCRPO and then Refund run using FPY1.
Hope this helps
Rgds
Rajendra

Similar Messages

  • How to return a list of customer  datatype in jax-ws 2.0?

    @WebService()
    public class TestWS{
         @WebMethod
         public List<CustomType> doWS(Integer userId)
            Business biz = new Business();
            return biz.doWS();
    }Thx!

    This should work, what problem you are facing?

  • How to deduct return goods amount directly in invoice

    Dear Experts,
    Customer return the goods now, after six months he will raise an sales order.
    Now client requirement is the return goods amount deduct from this this invoice.
    they want to show in billing,total amount and deducted amount with reason.
    Regards,
    Amar Reddy

    hi
    Customer return the goods now, after six months he will raise an sales order
    I am sorry but this requirment dosen't make any sence.
    If customer is returning goods now, then there must be some document (sales order or invoice for these goods)
    But if invoice is cleared i.e. posted to accounting then you can not do anything.
    Now coming to your scenario.
    Customer returns goods QTY = 100
    and after 6 months placing order for= 200
    You can add 2 line items with 100 and 200 qty for same material and one of material can have '-' pricing condition type
    in V/06 make the positive/negative as blank for this condition type
    And to deduct amount you can give negative value
    But again how you will handle stock??
    so best way is to go for Credit / debit memo and keep system sync

  • Posting a partial payment for customer receipts with full amount

    Hi,
    Is there a way by which I can post the full amount of the invoice as a partial
    receipt (that is without clearing the open items but at the same time linking the invoice and the amount). If I use F-28 the system clears the line item if the partial payment amount equals the invoice amount.
    The scenario here is a PDC received from the customer. I would like to post the credit to the customer account as a partial payment and debit a special GL account for PDC received. For finding out the customer ageing I shall not use the credit (as the PDC has not yet materialised). This can be done by posting the PDC entry using a different document type and excluding it from the selection criteria. At the same time customer account statements should be sent to him/her after considering the PDCs received (the assignment field will contain the invoice number and therefore can be summed). Only when the PDC is deposited and cleared do I want to clear the partial payment (if the amounts match) using the assignment field. The Cheques due on any date can be obtained from the Special GL account.
    Or can anyone think of a better way to solve the issue.
    1. PDCs should be credited to the customer account when it is received.
    2. The users know about the invoices pertaining to the PDCs only at the time of posting the PDCs and not during the time it is deposited into the bank. Therefore the linking should be done at the receipt of PDC stage itself and not later.
    3. Customer account statements have to be sent after considering the PDCs.
    4. A/R information system should not consider the PDCs received to the customer account.
    5. I should be able to quickly choose the cheques I want to deposit and transfer it to the Incoming Bank Account.
    Any help will be appreciated with points (and lots of them )
    Rgds
    Shivram.

    Hi
    I would suggest you treat the PDC as a noted item which is only for statistical purpose. You can post the PDC cheque to the customer account through transaction code F-38 which will post as noted item in the customer account. If you want to analyse the age-wise outstanding from the customer exclude the noted item. You can enter the invoice no for which payment is received in the assignment column which will be useful for sorting purpose. If you want to know what are the cheques to be deposited for the day, you can take the same by selecting the due on date from the customer accounts using the noted item indicator. By using this indicator the credit management for the customer can also be done.
    After depositing the cheque, reverse the statistical posting and make fresh posting as debiting Bank a/c and crediting customer account.
    Hope it will help you to some extent.
    Regards,
    K Lakshmanan

  • Last month I was 1 day late paying my bill, so I tried to pay the full amount.  But the website would only allow me to pay the current bill amount.  Now, I show a past due amount.  If I tried paying it and Verizon didn't allow me, how is it past due?

    Last month I was 1 day late paying my bill, so I tried to pay the full amount.  But the website would only allow me to pay the current bill amount.  Now, I show a past due amount.  If I tried paying it and Verizon didn't allow me, how is it past due?

    I'm confused - If I go online to pay my bill, and it's one day after the due date, the current bill and full amount due would be the same?  If the current bill is not the "full amount due", then what is the extra amount that's snow showing past due?
    Also, when I go in to pay my bill, I show the Current bill amount, total amount due (which are the same), and then a box where I can type in the amount I am paying, with the default amount being already filled in with the total amount. 
    Is this a pre-paid or a post-paid (contract) account?

  • Does anyone know how to contact a responsible, responsive customer service rep?  Promises of resolution to my billing issues are never kept.  Return calls are never made.  I contacted Executive Relations and emailed 3 Verizon executives.  No reponse.  Any

    Does anyone know how to contact a responsible, responsive customer service rep?  Promises of resolution to my billing issues are never kept.  Return calls are never made.  I contacted Executive Relations and emailed 3 Verizon executives.  No reponse.  Any number, email  or help contacting a reponsive person is appreciated!  Thanks!

    http://www.BBB.org
    File a complaint they will call you.
    Good Luck

  • TS1702 I was charged the wrong amount on 3 albums I downloaded.  I received an email about special pricing, I downloaded the albums I wanted and was billed for the full amount.  How do I get a refund?

    I was charged the wrong amount on 3 albums I downloaded.  I received an email about special pricing, I downloaded the albums I wanted and was billed for the full amount.  How do I get a refund?

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • How to upload 2 amounts from FDM to HFM in the same Account/diff Custom 1?

    Hi,
    We are using Hyperion System 9.3.1 FDM.
    In the past, we always upload one amount only per account through FDM into our Custom 1(flows) into closing. Now, we have in the source file (accounting system) not only the closing balance but also the movements in another column.
    This means that from now on we will need to upload the closing balance as well as the movement flow through FDM into HFM into the same account but in diferrent Custom 1.
    At this point, we succeed to upload one of the amounts into Custom 1 (either closing either movement) but we do not succeed to upload both Custom 1.
    source file
    ENTITY ACCOUNT MOVEMENT CLOSING
    x 120000 10 20
    y 121000 -3 -17
    in HFM
    ENTITY ACCOUNT C1-OPENING C1-MOVEMENT C1-CLOSING
    (calculated)
    x 120000 10 10 20
    y 121000 -14 -3 -17
    As you see above, what we need is to be able to upload 2 different C1 into the same account.
    Could any one help us with this ?
    Did anyone had this kind of upload ?
    Thank you.

    Hello,
    Unfortunately this is probably going to be outside the scope of the forum members; as it will take billable hours and a engagement to write all the scripting required.
    Basically it can be done ... and it has been done before. You will just need to add an import script or an ImportAction script to do the additional work. FDM can only read 'one' amount at a time by default; and other customizations must be put into place to achieve the results.
    Thank you,

  • How to set Internet Explorer to return full URL for the Print Job Name

    Hello all,
    On printing a web page from IE 6, 7, and 8 using javascript window.print command, the name of the printjob is truncated only to the first 63 characters. Unlike IE 9, it returns the full URL, or at least longer.
    Does anyone know the way to set those IE versions to return full or wider URL string?

    Sorry for lack of detail in my first post. I don't believe this has anything to do with javascript. The javascript command window.print() simply gives out command to the browser to print the web content.
    The situation is that, I open a webpage, for example,
    http://www.google.com.my/#sclient=psy&hl=en&source=hp&q=some+long+parameter+value+in+the+query+string&pbx=1&oq=some+long+parameter+value+in+the+query+string
    Then I right-click on the page and choose 'Print...' to print the page to a printer. Therefore, Windows spooler system will queue the print job with all the metadata about the doc that is printing. 1 of this metadata is document/printjob name, which are
    set to the name of the doc. In case of a web page from IE, this field will be populated with the URL of the page.
    I notice that, when I do printing from IE 9 of the above URL, the field document/printjob name is the whole URL string. But while in IE 8 and below, only the first 63 characters of the URL are populated into the field. (I.e:
    http://www.google.com.my/#sclient=psy&hl=en&source=hp&q=some+l)
    I believe this field is set by the application that sent out the printing command to the spooler. In this case, it's IE.
    So, my question is, is there any reg settings for IE 8 and below to force them to put in the whole URL in that field instead of truncates them to only 63 characters?

  • How to return the correct row of data using diffferent conditions?

    I am having some problems with an sql query and I hope someone can help please?
    The data I am using is customers with multiple transactions. If a customer contains one transaction where the transaction type = 'W' then I need to set the output value to be transaction.ValueA. If the customer does not contain any transactions where the transaction type is 'W' then I need to set the output value to be
    the most recent transaction.ValueB where transaction.transaction_date <= customer.cust_mod_date.
    Here is an example of the data. For each test customer 10 and 20 I have put a star against the value I want to return
    CUSTOMER_ID CUST_MOD_DATE TX_DATE      TX_TYPE TX_VALUEA TX_VALUEB
    10          15/07/2009 16/07/2009     A     110      95
    10          15/07/2009 14/07/2009     A     100      90(*)          
    10          15/07/2009 13/07/2009     A     90          10
    10          15/07/2009 12/07/2009     A     80          5
    20          15/07/2009 15/07/2009     A     60          10
    20          15/07/2009 14/07/2009     W     50(*)     20
    20          15/07/2009 13/07/2009     A     40          30
    ie
    CREATE TABLE
    TMP_CUSTOMER (CUSTOMER_ID NUMBER, CUST_MOD_DATE DATE);
    insert into tmp_customer
    values(10, to_date('15/07/2009','dd/mm/yyyy'));
    insert into tmp_customer
    values(20, to_date('15/07/2009','dd/mm/yyyy'));
    CREATE TABLE
    TMP_TRANSACTION (TX_ID NUMBER, CUSTOMER_ID NUMBER, TX_DATE DATE, TX_TYPE VARCHAR2(1), TX_VALUEA NUMBER, TX_VALUEB NUMBER);
    INSERT INTO TMP_TRANSACTION
    VALUES (1,10, to_date('16/07/2009','dd/mm/yyyy'),'A',110,95);
    INSERT INTO TMP_TRANSACTION
    VALUES (2,10, to_date('14/07/2009','dd/mm/yyyy'),'A',100,90);
    INSERT INTO TMP_TRANSACTION
    VALUES (3,10, to_date('13/07/2009','dd/mm/yyyy'),'A',90,10);
    INSERT INTO TMP_TRANSACTION
    VALUES (4,10, to_date('12/07/2009','dd/mm/yyyy'),'A',80,5);
    INSERT INTO TMP_TRANSACTION
    VALUES (5,20, to_date('15/07/2009','dd/mm/yyyy'),'A',60,10);
    INSERT INTO TMP_TRANSACTION
    VALUES (6,20, to_date('14/07/2009','dd/mm/yyyy'),'W',50,20);
    INSERT INTO TMP_TRANSACTION
    VALUES (7,20, to_date('13/07/2009','dd/mm/yyyy'),'A',40,30);
    The query I have so far is
    (SELECT CUSTOMER_ID, CUST_MOD_DATE, TX_DATE, TYPE_FLAG, TX_VALUEA, TX_VALUEB, RN
    FROM (SELECT CUST.CUSTOMER_ID, CUST.CUST_MOD_DATE,TRANS.TX_DATE, TRANS.TYPE_FLAG, TRANS.TX_VALUEA,TRANS.TX_VALUEB,
    ROW_NUMBER() OVER (partition BY TRANS.CUSTOMER_ID ORDER BY TRANS.TX_DATE DESC) RN
    FROM TMP_CUSTOMER CUST,
    --- Return all transactions creating a type_flag field where Y = type W, else N ---
    SELECT CUST.CUSTOMER_ID, TX.TX_DATE, TX.TX_VALUEA, TX.TX_VALUEB, CUST.CUST_MOD_DATE, TX.TX_TYPE,
    CASE WHEN NVL(TX.TX_TYPE,'0') <> 'W' THEN 'N'
    WHEN NVL(TX.TX_TYPE,'0') = 'W' THEN 'Y'
    ELSE 'N'
    END AS TYPE_FLAG
    FROM TMP_TRANSACTION TX, TMP_CUSTOMER CUST
    WHERE TX.CUSTOMER_ID = CUST.CUSTOMER_ID
    AND CUST.CUSTOMER_ID in
    '10','20'
    ) TRANS
    WHERE CUST.CUSTOMER_ID = TRANS.CUSTOMER_ID
    --AND   TRANS.TX_DATE <= CUST.CUST_MOD_DATE
    AND CUST.CUSTOMER_ID in
    ('10','20'
    Can anyone please help with how I extract the record I am looking for
    ie customer 10 has amount 90
    customer 20 has amount 50.
    Thanks :-)
    GB

    SQL> select c_id
      2  ,      cust_mod_date
      3  ,      tx_date
      4  ,      tx_type
      5  ,      tx_valuea
      6  ,      tx_valueb
      7  from ( select c.customer_id c_id
      8         ,      c.cust_mod_date
      9         ,      t.tx_date
    10         ,      t.tx_type
    11         ,      t.tx_valuea
    12         ,      t.tx_valueb
    13         ,      row_number() over (partition by c.customer_id order by t.customer_id, t.tx_date desc) rn
    14         from   tmp_customer c
    15         ,      tmp_transaction t
    16         where  t.customer_id = c.customer_id     
    17         and    t.tx_date <= c.cust_mod_date
    18       )
    19  where case
    20          when tx_type = 'W' then 1
    21          when rn = 1
    22          and  not exists ( select null
    23                            from   tmp_transaction t2
    24                            where  t2.customer_id = c_id
    25                            and    t2.tx_type = 'W'
    26                          )
    27          then 1
    28        end = 1;
          C_ID CUST_MOD_ TX_DATE   T  TX_VALUEA  TX_VALUEB
            10 15-JUL-09 14-JUL-09 A        100         90
            20 15-JUL-09 14-JUL-09 W         50         20
    2 rows selected.

  • How to Handle TDS deduction by Customer

    Dear Experts,
    Can you please help me that how should I handle the case in which customer deducts our TDS. Actually, at one of my client site they can not predict that their customer is going to deduct TDS or not. So please tell me how should I handle this. Actually on Incoming Payment I have asked them to do on account paymenmt so that they can deduct it at the time of payment but sales invoice is of full amount. So they can not reconcille it.
    Please help me on this ASAP.
    Thanks
    Swapy

    Hi Swapy.........
    Please check this Thread......
    Not able to do Reconcillation with BP.
    Regards,
    Rahul

  • I bought this iPhone from Apple Retail Store for the full amount, but  it does not work with my SIM card only works with AT&T

    Hello,
    I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
    I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
    Thanks,
    Best Wishes

    When did you buy it?
    Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
    What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason.  Return it and get your money back, then use that to purchase an unlocked phone.

  • How to exit full screen mode mail message

    Inexplicably, when i open messages in Mail, they appear in something like full screen mode.   The message viewer window is not in full screen mode, but if i open any message, the message takes up the whole screen. I can drag the message in order to see other things on the desktop, but i can't adjust the size of the window to the size i want, and see no way of exiting full screen mode. I lookd in Help, but it only shows how to enter Full Screen, not how to exit it. 
    In the View menu, there is an option to enter full screen.  When i have the full screen sized message open on top, the enter full screen option in the View menu is greyed out.  If i have the normal sized window for the message viewer window on top, the enter full screen is not grayed out and could be selected.  I do not select it since there appears to be no 'exit full screen' option that i can see and i don't want to multiply this problem.
    I know this might be a silly question, but if they have an enter full screen option, why wouldn't they also have an exit full screen option? 
    Or is there an exit full screen option which exists somewhere that i have not been able to find?  I've searched Apple Discussions and Google but so far have not found a way to un-full screen my Mail messages.  This started this morning.
    Can anyone help?  
    I do not know how it got into full screen mode.  It was not something i did deliberately or knowingly.
    i have tried quitting and restarting Mail but the full screen message mode returns. 
    How can i get my mail messages out of this very annoying and awkward screen hogging mode?
    I have only been using Mail since last November when i got a new MBP with Mountain Lion, which meant that for the first time since 1995, i could not use the simple straightforward faultless Eudroa anymore.  So i have had my struggles with Mail.  Trying to get through it.  This is the most recent of various similar issues, inexplicable problems without apparent solutions.  Sort of Microsoft-like.
    I will be really grateful for any help.. thanks

    Press Control + Command + F on your keyboard to enter or exit full screen mode.

  • How do I do use the custom code and format for a percentage with 2 decimals in Report Builder 3.0?

    In Report Builder 3.0, I have the following custom code entered:
      Public Function SafeDivide(Numerator as String, Denominator as String) as String
    Try
    If Numerator = “” or Denominator = “” then
    Return “-“
    End if
    If Numerator = “-“ or Denominator = “-“ then
    Return “-“
    End If
    If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
    Return “-“
    End if
    If IsNothing(Numerator) or IsNothing(Denominator) then
    Return "-"
    End if
    Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
    Catch
    Return "-"
    End Try
    End Function
    I call the custom code in the cell with the following equation:
      =Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
    I have the format for the cell set to 0.00%, but it’s not being followed.
    I want the result to be formatted as a Percentage, but instead I get values like: 
    -78.9473684210
    80
    300
    -100
    I have the format for the cell set to 0.00%, but it’s not being followed.
    How do I do use the custom code and format for a percentage with 2 decimals?

    Hi AngP,
    After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
    compared.
    To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
    BackgroundColor:
    =iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • After invoice verified, how to return to vendor?

    we purchase mat. from vendor, now we want return some mat. to vendor, if we don't do invoice verification, we can reverse po via mvt 102 directly. but now i have done invoice verification, how to return to vendor in system.

    hi
    >If LIV and Payment to Vendor is done then
    1. ME21N - Create a Returns PO (Activate "Returns" indicator for PO line item)
    2. MIGO - Goods Receipt > Purchase Order (Returns PO) (Here system will hit Mvmt type "161" and you can also select Un-restricted/blocked stock from where you want to return the stock)
    3. J1IS u2013 Excise Invoice Other Movements
    Here click on u201Ccreateu201D button to create an outgoing excise invoice and reverse the CENVAT Amount.
    Here put all details as below and Press u201CEnteru201D.
    Ref.doc.type - MATD
    Doc Number - Material document No of 161 mvmt
    Doc Year
    Series Group
    Excise Group
    Vendor
    Here check BED, ECS and SECess values to be reversed and click on u201CSaveu201D button to post the excise invoice.
    4. J1IV - Post and Print Outgoing Excise Invoice.
    5. MIRO - Credit memo w.r.t. Returns PO.
    >Accounting  cycle flows like this;
    At the time of GR (MIGO);
    Stock A/c - Dr
    GR/IR Clearing A/c - Cr
    Excise Invoice Posting (J1IEX);
    CENVAT Receivable A/c - Dr
    CENVAT Clearing A/c - Cr
    At the time of LIV (MIRO);
    Vendor A/c - Cr
    GR/IR Clearing A/c - Dr
    CENVAT Clearing A/c - Dr
    At the time of Vendor Return (MIGO);
    Stock A/c - Cr
    GR/IR Clearing A/c - Dr
    Return Excise Invoice for Vendor Return (J1IS & J1IV);
    CENVAT Receivable A/c - Cr
    CENVAT Clearing A/c - Dr
    At the time of Credit Memo (MIRO)
    Vendor A/c - Dr
    GR/IR Clearing A/c - Cr
    CENVAT Clearing A/c - Cr
    hope it clears
    regards
    kunal

Maybe you are looking for

  • Animate lags on Retina MacBook Pro

    I got a new MacBook Pro, and Animate seems to really lag when scrolling through the timeline. I didn't have this issue on my old laptop. Is anyone else having this issue? Is there a way to fix it?

  • How can I get mail to automatically update calendar invites without actually opening calendar and disrupting my work?

    I like mail to continue placing new invitations into my calendar so that I can accept (or reject) them when convenient.  However I would like to be able to work in an application without being disrupted whenever someone sends me lots of invitations. 

  • Error with bc4j input date tag running a Jsp file.

    when im running the bc4j input date tag in a form, a jscript error comes up (object not found error)-> When i pick the date control. I have already checked the cabo directory and all files is there. The same enviroment in other developers PC�s works

  • Error -2147352567 when using Save Report vi

    Hi, I'm developing an end of line test bench software for a firm. Things were going fine till I came across an unexpected error which I fail to comprehend. My code runs a motor simulation and saves the data in two separate excel files. When I have th

  • Parallels Desktop/Boot Camp - USB Printer/Ext HD Access?

    I am able to access my printer and ext hd via AirPort Extreme when I load into the Mac OS. However, I can only print/view files from the Mac OS and am unable to print/access the hard drive when I am using Windows XP via Parallels Desktop, as well as