How to return "HTTP/1.0 401 Authorization Required" from OSB's Message Flow

How can I return "HTTP/1.0 401 Authorization Required" header from OSB's Message Flow?
Using of "HTTP Transport -> Authentification" is not possible, because I need flow condition. Transports Headers activity from design palette doesn't allow to send such headers.
Practical usage: request for kerberos ticket by sending two headers: 401 and WWW-Authenticate: Negotiate...

Can you briefly expand the use case for better understanding?
HTTP Client---> Hand Shakes or what ever ----> HTTP Proxy (OSB )---> Pipeline----
Philosophy behind pipeline is that it is designed to work on the request. Correct me if I'm wrong.
What you are asking is ability to control the hand shake either in Pipeline or some way during proxy configuration. Unfortunately there is no configuration that is exposed for HTTP proxies in OSB to control that behavior.
Manoj

Similar Messages

  • Server returned HTTP response code: 401

    hi,
    I am trying to get the tutorial example to run but always fails at "ant install", with the following error code:
    file:C:/jwstutorial12/examples/common/targets.xml:15: java.io.IOException: Server returned HTTP response code: 401 for U
    RL: http://localhost:8080/manager/install?path=%2Fgs&war=file%3A%2Fjwstutorial12%2Fexamples%2Fgs%2Fbuild
    THe only thing I can think of is that the build.properties file is not good. It should be in my "home" directory. What exactly is my home directory and how do I define it?
    thanks,
    lingling.

    Double-check your password, keeping in mind that property files can override the properties defined in your ant file. Below the tomcat.properties overrides the username and password:
      <property file="tomcat.properties"/>
      <!-- Configure properties to access the Manager application -->
      <property name="url"      value="http://localhost:8080/manager"/>
      <property name="username" value="tomcat"/>
      <property name="password" value="tomcat"/>

  • 401 Authorization Required ERROR!!

    Hi everyone, here is my problem.  I cant change ANY setting for my linksys befsr41 v1 router.   i can log in witht he password (admin), but when i try and change a setting (ie filters) a password prompt pops up , then after entering my password 3 time i get the "401 Authorization Required" error. 
        so far i have reset to factory defaults, changed my firmware, and tried changing the password, nothing has worked.  i know its not a password issue.  i have spent hours on this and got no where SOMEONE PLEASE HELP ME!!!!
    -Matthew
    Message Edited by SDMF on 07-10-2007 11:19 AM
    (Mod Note: Edited due to non-compliance of forum guidelines.)
    Message Edited by daikunzeon on 07-10-2007 11:31 AM

    while the router is ON...press the reset button on the back of it for a whole minute.... while still pressing down, remove the power cable then release the reset button... clear your browser cache again then restart your computer... turn the router back ON again then access the router setup page once more..... you should leave username blank then use admin as your password.... remember your DSL/Cable configuration to get your Internet connection back ok?

  • How am I able to add and remove people from a group message?

    How am I able to add and remove people from a group message?

    You'd need to start a new thread.

  • How to return http status?

    My application gets a request from an external server and it has to send a http 200 status back if the request was received successfully. If the requesting server does not get a response then it will try to send the request again. Now how do I send a status code 200 to the requesting server from a jsp ?
    Thanks.

    This should work:
    <%@ page contentType="text/html;charset=UTF-8" language="java" %>
    <%
        response.setStatus(HttpServletResponse.SC_OK);
    %>or
    <%@ page contentType="text/html;charset=UTF-8" language="java" %>
    <%
        response.setStatus(200);
    %>But if a browser is making the request, it automatically returns HTTP 200 . I think even when another application is making a request, it automatically sends a 200 status in the header but I'm not sure about this.

  • IPP Error 0xF0191 / HTTP Error 401 - Authorization Required

    Hey guys,
    i'm struggeling with my iPrint.
    When I try to manage my Driverstore an error occurs
    "Authorization Required
    IPP Error: 0xF0191
    HTTP Error: 401"
    I already tried the work-around from the KB but i cant help myself.
    I also tried to add another user and another Driverstore but both also didnt work.
    Best Regards,
    Kevin

    w0zzup,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Returning HTTP status codes (401, 403, etc) to Flash 8

    Hi all,
    I'm using AMFPHP on the server-side and Flash remoting
    classes to communicate with it. Everything's working great, but i'd
    like Flash to be able to recieve HTTP status codes from the server.
    For example, if on the server side (in PHP) I go:
    header("Status: 401 Unauthorized");
    I'd like the remoting service on the flash side to be able to
    get the HTTP error code (401 in the example above).
    I know this is possible with
    [url=http://livedocs.adobe.com/flash/8/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context =LiveDocs_Parts&file=00002333.html]LoadVars.onHTTPStatus[/url]
    but it doesn't seem to deal with using it with Flash Remoting.
    Thanks all :)
    - Nilesh

    Hi, I am trying to PUT to update contact info and I get following error:
    2015-01-16 11:00:17,970 INFO [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(97) | accessHttpsPut.url=https://secure.eloqua.com/API/REST/2.0//data/contact/7606838, text={"id":"7606838","accountName":"openIdStr001","emailAddress":"[email protected]","type":"Contact"}
    2015-01-16 11:00:18,931 ERROR [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(140) | ClientProtocolException
    org.apache.http.client.HttpResponseException: Request is malformed.
    Is there any idea?
    Thanks so much.
    Sincerely.

  • How to do HTTP getRequest() with windows NTLM authentication from OBPM..??

    Hello All,
    Please share your expert ideas how me can do HTTP getRequest() with windows NTLM authentication from OBPM..??
    I am not sure even whether its possible or not, if not what could be the alternative way to do integration with MS SharePoint ??
    Version : Oracle BPM v 10.3.1
    Cheers
    Parveen Jaswal

    You are only as secure as web browsing to the LogMeIn website is (which appears to use HTTPS). If your login on that site is compromised, they will have a list of your computers that they can attempt to connect to. As long as you don't save the login credentials, they would then also need to know what username and password to use to connect to the computer. Granted, a little social engineering, and they could probably get some good ideas what to try for those, but if you chose to make your computers secure with complex and hard to guess passwords then it should be fine.
    I've been using LogMeIn from my Mac to my mom's Windows XP system from July 2009, and to my wife's Thinkpad running Win 7 since Oct 2009. None of the computers involved have had any security issues at all, let alone any caused by LogMeIn. For my wife's PC, it sits behind our NAT Firewall in our LinkSys Router (although I did have it behind a CheckPoint VPN Edge router for a while). My Mom's PC sits behind a Netgear Router providing its NAT Firewall. When my Mac isn't at home, it's generally behind that CheckPoint VPN router at my office now. It all works nicely from behind one router to behind another. The Piece that you install on the PC will log it into the LogMeIN website and that is how it gets through the router to the PC. You login to the website, select the PC to control, then login to that PC.

  • How to Call HTTP Sender Adapter of Other Scenar from HTTP Receiver Adapter?

    Hi,
    I have a requirement to call HTTP Sender Adapter of Other Scenario from HTTP Receiver Adapter?
    or
    call SOAP Sender Adapter of Other Scenario from SOAP Receiver Adapter?
    i.e
    SOME SENDER - > PI - > HTTP Receiver - > calling -> HTTP Sender -> PI -> SOME RECEIVER
    SOME SENDER - > PI - > SOAP Receiver - > calling -> SOAP Sender -> PI -> SOME RECEIVER
    if any one can provide me the screen shot for those SOAP / HTTP Sender or Receiver ADAPTER.
    or Point me to Some article with Screenshots .
    That would be appreciated with Point.
    Regards
    PS.

    Solved .  .

  • Server returned HTTP response code: 401 for URL

    i am trying to execute the following piece of code from a remote client:
    URL url = new URL("www.abc.com/servlet/someservlet");
    URLConnection conn = url.openConnection();
    but i am getting a server returned 401 error, i did some research and i think my client needs a some kind of authentication to call that servlet. Can somebody send me a code snippet on how to do this?
    thx

    Assuming that your user ID is in a variable called "userName", password is in "password", and your URL connection is "urlC", try something like this:
    // Construct the user name/password string and base64 encode it               
    String userPassword = this.userName + ":" + this.password;
    String encoding =
        new sun.misc.BASE64Encoder().encode(userPassword.getBytes());
    // Set the authorization request property - use basic authentication
    urlC.setRequestProperty ("Authorization", "Basic " + encoding);
    // connect to the URL
    InputStream content = (InputStream)urlC.getInputStream();HTH
    Lee

  • How to return complex data to PL/SQL pkg from java running in JVM

    Hi, I don't know where could I post this question, so I post it here.
    In Oracle, we could create object as type, and can pass it to Java (powered by JDBC I guess, but I don't know how to, if some one know, please tell me where could get the good document to teach me about this), but is there any way could return complex data (maybe in Oracle Object Type) to PL/SQL (not using long & seperated by sign string / using middle table)?
    If you know, please tell me how to / tell me the url or book name for how to do this, thanks!

    with t as (
               select  1 id,'a' type_cd from dual union all
               select  1 id,'a' type_cd from dual union all
               select  1 id,'b' type_cd from dual union all
               select  2 id,'c' type_cd from dual union all
               select 33 id,'b' type_cd from dual union all
               select 33 id,'b' type_cd from dual union all
               select 33 id,'c' type_cd from dual union all
               select 33 id,'d' type_cd from dual union all
               select  5 id,'c' type_cd from dual union all
               select  5 id,'c' type_cd from dual
    select  id,
            type_cd
      from  (
             select  id,
                     type_cd,
                     count(distinct type_cd) over(partition by id) cnt,
                     row_number() over(partition by id,type_cd order by 1) rn
               from  t
      where type_cd = 'c'
        and cnt     = 1
        and rn      = 1
            ID T
             2 c
             5 c
    SQL>SY.

  • How do you request a received and read report from a text message to a non-iphone

    how do i request a received and read report on text messages sent to a non iphone like i did with my droid?

    You cant with the native iphone app.

  • How to restore file system of the previous backup from OSB using webtool?

    Dear all,
    I have some problem regarding to the file system restoration.
    For example, I have backed up some files yesterday and today those files have been made change.
    So tomorrow I am planning to restore the files from the yesterday backup (the original files before made changes) to other host for testing the data.
    Is it possible to do that, since when i restore i can see only the latest ones and search options during restoration are not working well (as date, date range,.....) ?
    Your reply to me is very important.
    Thanks and regards,
    Rasmey

    There is no recovery partition on drives which haven't had 10.7 or 10.8 installed. You need to use a Mac OS X install DVD to restore the backup.
    (82545)

  • HTTP response code 401 when trying to import webservice

    Hi,
    I've created a Webservice how descripted in http://help.sap.com/saphelp_erp2005/helpdata/de/24/186440bdd39a0ae10000000a155106/content.htm. Now I try to import it in NWDS. I followed the step by step guide "81 Using a Web Service as External Service (Service)".
    My WDSL file of my webservice is available over http://server:8000/sap/bc/srt/rfc/sap/Z_MPO_XRFC_CAFTESTBO_GETBYNAME?wsdl
    When I try to use this url in step 4 (page 13) I get the following message:
    Cannot Load WebService WSDL from URI: http://server:8000/sap/bc/srt/rfc/sap/Z_MPO_XRFC_CAFTESTBO_GETBYNAME?wsdl reason: IO Exception occurred while parsing file:Server returned HTTP response code: 401 for URL:
    http://server:8000/sap/bc/srt/rfc/sap/Z_MPO_XRFC_CAFTESTBO_GETBYNAME?wsdl
    The HTTP errorcode means "no authorisation". But why does the NWDS don't ask for user and password?
    Any ideas?
    Best regards from cologne
    Martin

    Hello Martin,
    step 4 of page 13 is only for loading the WSDL and generating the external service model.  The user and password that you give here is not used for exectuting the web service.  The runtime configuration for your web service is done on page 23 of the tutorial.  Here is where you set the user and password for the execution of the web service.  You can choose either basic authentication or SSO with login ticket which will not send any text login information.
    Regards,
    Austin.

  • Error message : HTTP responce code: 401 Access denied

    Hi,
    I am working on Oracle OpenScript 8.5.
    After record the script when i click on playback I got an error message in the following Bold lines code.
    http.get(33, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "GET_DOC_PAGE"), http.param("Action", "GetTemplatePage"), http.param("Page", "TRAY_SEARCH_FORM")), null, true, "iso-8859-1", "utf-8/");
    http.get(37, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "SS_GET_PAGE"), http.param("siteId", "FCOE"), http.param("siteRelativeUrl", "%2Fhttp%3A%2F%2Fstclnx01.satyam.com%2Fidc%2Fidcplg"), http.param("ssUrlType", "2"), http.param("IdcService", "COLLECTION_DISPLAY"), http.param("hasCollectionID", "true"), http.param("dCollectionID", "42")), null, true, "utf-8/", "utf-8/");
    http.get(41, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "SS_GET_PAGE"), http.param("nodeId", "13"), http.param("siteId", "FCOE")), null, true, "iso-8859-1", "ASCII");
    The error message in Result view is HTTP responce code: 401 Access denied .
    The error message in Console View is oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 401  Access denied
    Note: When i comment that Bolded Code then the script was passed.
    Can any one help me... ..it's very urgent.
    Thanking you.
    Regards,
    Ramesh Dodda
    Edited by: Ramesh Dodda on Jun 11, 2009 1:27 AM
    Edited by: Ramesh Dodda on Jun 11, 2009 1:40 AM

    Hi
    Do you need a username and password to get to the application ?
    Regards
    Alex

Maybe you are looking for