How to return the JSP page name

Hello guys:
for some reasons,i want show the page name on itself,but it always return NULL when use request.getPathInfo().
Thanks

Hiii,
If you want the relative path....then the following will do the job.
String vPath = request.getRequestURI();
Otherwise you can get the whole path with the use of following.
String rPath = getServletConfig().getServletContext().getRealPath("/your.jsp")
Hope that helps.

Similar Messages

How to get the jsp page name in jsp?

how to get the jsp page name in jsp? how the jsp get the jsp page name dynamic.
thanks in advance.

Try request.getServletPath()

How to test the JSP pages and sevlets using JUnit. ?

How to test the JSP pages using JUnit. How to configure what are all the steps to execute the JUnit test cases.

Hi xiepei,
since you are using modbus, a simple error checking is implicit in the protocol and is the comparison between returned checksum and the calculated one on the received message: checksum errors, if any, are an effect of communications errors (you should have at least 2 bits changed and on particular patterns to have the checksum be calculated correctly!). You won't be able to calculate BER on them, but you can calculate PER (Packet Error Rate).
Another flag for communication errors, on the other direction, is to intercept error messages from the device: if it fully implements modbus protocol, it should return some warning in case of error (I seem to remember that in some cases it returns the reveived message with some error bits added: please check in modbus documentation).
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to get the Portal Page name from PLSQL?

Can anyone tell me how to get the portal page name from my dynamic page using plsql?
Apparently you can get the page id and work it out from there, but my calls to get the page id are not returning any values anyway.
My code for attempting to get the page id is below.
<oracle>
declare
v_pageid varchar2(30);
begin
v_pageid := wwpro_api_parameters.get_value('_pageid', '/pls/portal30');
htp.print('Page is '|| v_pageid);
end;
</oracle>
Ideally I'd actually just like to get the page name. Is there a straightforward way to do this?
Thanks in advance!
Sarah

Few clarifications -
1. wwpro_api_parameters cannot be used to get default portal
page parameters such as '_pageid', '_dad', '_schema' etc.,
2. Page information can be obtained through any components which
are available in that particular page. For example, in case of
dynamic page, we need to publish it as a portlet and add it to the
page. This process creates necessary packages in the DB, but we
will not have access to the portlet methods.
So, I would prefer creating a simple DB provider & portlet and access
page title from its show method as follows -
//Declare local variable l_page_id, l_page_title as varchar2
select page_id into l_page_id from wwpob_portlet_instance$ where
portlet_id = p_portlet_record.portlet_id and
provider_id = p_portlet_record.provider_id;
select name into l_page_title from wwpob_page$ where id=l_page_id;
More information on DB provider can be found at
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/articles/understanding.database.providers.html
Secondly, usage of wwpro_api_parameters.get_value method is
incorrect. This method expects two arguments -
<ul>
<li><b>p_name : </b> The name of the parameter to be returned.</li>
<li><b>p_reference_path : </b> An unique identifier for a portlet instance on the current page.</li>
</ul>
p_reference_path would be something like 99_SNOOP_PORTLET_76535103 and not some type of path as its name suggests.
The following code fragment fetches all parameters available
for a portlet.
Note : Copy this code into 'show' method of your portlet.
//Declare l_names, l_values as owa.vc_arr
* Retreive all of the names of parameters for this portlet
l_names := wwpro_api_parameters.get_names(
p_reference_path=>p_portlet_record.reference_path);
* Retreive all of the values of parameters for this portlet
l_values := wwpro_api_parameters.get_values(p_names=>l_names,
p_reference_path=>p_portlet_record.reference_path);
//Loop through these arrays to get parameter information
htp.p('<center><table BORDER COLS=2 WIDTH="90%" >');
htp.p('<tr ALIGN=LEFT VALIGN=TOP>');
htp.tableData(wwui_api_portlet.portlet_heading('Name',1));
htp.tableData(wwui_api_portlet.portlet_heading('Value',1));
htp.tableRowClose;
if l_names.count = 0 then
htp.p('<tr ALIGN=LEFT VALIGN=TOP>');
htp.p('<td COLSPAN="2">'
||wwui_api_portlet.portlet_text(
'No portlet parameters were passed on the URL.',1)
||'</td>');
htp.tableRowClose;
else
for i in 1..l_names.count loop
htp.p('<tr ALIGN=LEFT VALIGN=TOP>');
htp.tableData(l_names(i));
htp.tableData(l_values(i));
htp.tableRowClose;
end loop;
end if;
htp.p('</table></center>');
Hope it helps...
-aMJAD.

How to send the jsp page to .txt format

Hi All
Please suggest me how to create a .txt file using the desformat. My requirement is file should be saved as txt format and it will be sended by mail to be user pager. He can see the txt file through his pager. I tried several techniques but it not working.
I am using the following URL:
http://123.223 /reports/rwservlet? report=Admission.jsp&destype=file&desname=c:/demo/Admission.txt&userid=am/ampazz@tempdb
The above URL is correct or any changes required.
Pls suggest me…
Thanking all
Regards
Srinivas

Some of the points might help you in thinking towards right direction, you might already know this but doesn't look like you are following in your code anyway.
1. The JSP that you are emailing is uncompiled source file. It need JVM environment to be able to run on.
2. The JSP is a view technology so try to separate the view logic from the business.
3. Try to put entire business logic in a Bean and use that in your JSP to start off with.
You may need to write the HttpServletResponse#content on to the Writer and then persist it on the filesystem. and then send that persisted file as an attachment.
Have a look at http://java.sun.com/j2se/1.5.0/docs/api/java/io/Writer.html
It provide different type of writer implementations.
HttpServletResponse#getWriter() provides PrintWriter instance.
Does it make sense?

How to find the view/page name in portal

Hi All,
I am new in SAP. I have to customize a Compensation page in HR module.
Could some one help me to find out these things:
--- How can I find out the page/iview name from portal which I want to customized i.e. I am on HR module of compensation page and I want to know the name of iview/page name.
--- How can I start development for customization.
Any type of help will be highly appreciated.
thanks in advance,
-Anand

Hi,
The component name is FITV_POWL_TRIPS. check this help for more details: https://help.sap.com/erp2005_ehp_03/helpdata/EN/46/51dd0698075e3fe10000000a11466f/frameset.htm
hope this helps u,
Regards,
Kiran

How to send the jsp page with the data as attachment

hi
my application is to display all the datas from the database.In the same page. i'm having a option to select mail address from the combo box and to send the page with the same format thru mail as an attachment .
<%      String from="192.168.10.1";
          String to=request.getParameter("to");
          System.err.println(to);
          String mailhost="localhost";
         System.err.println("hiiiiiiiii");
          try
               System.err.println("byeeeeeee");
               Properties prop=System.getProperties();
               prop.put("mail.smtp.host", mailhost);
               Session ss=Session.getInstance(prop,null);
            System.err.println("session props");
               Message message = new MimeMessage(ss);
               System.err.println("message");
               message.setFrom(new InternetAddress(from));
               System.err.println("form not null");
               message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
               System.err.println("from and to r set");
               message.setSubject("Hello JavaMail Attachment");
          // Create the message part
               BodyPart messageBodyPart = new MimeBodyPart();
          // Fill the message
               messageBodyPart.setText("have u got the attachement?");
               Multipart multipart = new MimeMultipart();
               multipart.addBodyPart(messageBodyPart);
          // Part two is attachment
               messageBodyPart = new MimeBodyPart();
               DataSource source = new FileDataSource("C:/Program Files/Apache Software Foundation/Tomcat 5.0/webapps/MgmtTool/emsReport.jsp");
               messageBodyPart.setDataHandler(new DataHandler(source));
               messageBodyPart.setFileName("emsReport.jsp");
               multipart.addBodyPart(messageBodyPart);
          // Put parts in message
               message.setContent(multipart);
               System.err.println("ready");
          // Send the message
               Transport.send(message);
               out.println("mail was sent successfully");
          catch(Exception e)
          {out.println(e);}
          %>
by using this code i 'm sending the emsreport page as attachment
i'm recieving only the tabular format but i cant able to get those data which are present on that page
i dont know wat to do???
kindly help me
thank u in advance

Some of the points might help you in thinking towards right direction, you might already know this but doesn't look like you are following in your code anyway.
1. The JSP that you are emailing is uncompiled source file. It need JVM environment to be able to run on.
2. The JSP is a view technology so try to separate the view logic from the business.
3. Try to put entire business logic in a Bean and use that in your JSP to start off with.
You may need to write the HttpServletResponse#content on to the Writer and then persist it on the filesystem. and then send that persisted file as an attachment.
Have a look at http://java.sun.com/j2se/1.5.0/docs/api/java/io/Writer.html
It provide different type of writer implementations.
HttpServletResponse#getWriter() provides PrintWriter instance.
Does it make sense?

How to determine the jspx page name in the EntityImpl Java Class

Hello, I'm new jdev programmer. I've come across a scenario that I haven't been able to figure out.
I have a small application with only two pages, but uses the same Entity class. I have two views (One view per page).
In the protected void doDML() method the Entity class, I want the custom logic I have in this method to fire if the call is coming only from a certain page.
Is there a way to determine which "Page" is active in this java class, so that I can do a simple if statement to check if this is the page, and then fire my custom logic in the method?
Thanks

I'll +1 Frank on this one.
There's been a few posts in the past few weeks like this, where I see people trying to access the view state in the model or vice-versa perhaps. I'd like to share one of my "tips and tricks" here:
Pretend that the model (your business components) and your view (the JSF page/ Swing app) are running on different machines (because they can!) You can physically deploy your model and your view on two separate machines; so, if you find yourself trying to get the view state in the model layer, or trying to grab a JDBC connection in the view layer - don't!
Hope this helps,
John

Can any body tell me how to map the jsp page with sling servlet

here is my content.jsp
<%@include file="/libs/foundation/global.jsp"%>
<cq:include script="/libs/wcm/core/components/init/init.jsp"/>
<div>
<h3>Login</h3>
<form name="frm" method="doGet" action="/LoginServlet">
<cq:include path="texot" resourceType="sapphirenow_web/components/foundation/textlog"/>
<cq:include path="text1" resourceType="sapphirenow_web/components/foundation/textlog"/>
<cq:include path="text3" resourceType="sapphirenow_web/components/foundation/submit"/>
    </form>
</div>
here is my LoginServlet.java
package com.sapphirenow.web;
import java.io.*;
import java.util.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.IOException;
import javax.servlet.ServletException;
import org.apache.sling.api.SlingHttpServletRequest;
import org.apache.sling.api.SlingHttpServletResponse;
import org.apache.sling.api.servlets.SlingAllMethodsServlet;
* @scr.component metatype="true"
* @scr.service interface="javax.servlet.Servlet"
* @scr.property name="sling.servlet.paths" value="/bin/mn"
* @scr.property name="sling.servlet.methods" values="GET"
public class LoginServlet extends SlingAllMethodsServlet
public void doGet(SlingHttpServletRequest request,SlingHttpServletResponse response) throws ServletException,IOException
          response.setContentType("text/html");
          PrintWriter out = response.getWriter();
          String name = request.getParameter("Username");
          String pass = request.getParameter("Password");
          out.println("<html>");
          out.println("<body>");
          out.println("Thanks Mr." + " " + name + " " + "for visiting roseindia<br>" );
          out.println("Now you can see your password : " + " " + pass + "<br>");
          out.println("</body></html>");
   its showing "The requested URL /LoginServlet was not found on this server." how to solve this pls help me

Hi,
Bellow some links which maybe hepls you:
-> http://sling.apache.org/site/manipulating-content-the-slingpostservlet-servletspost.html
-> http://edivad.wordpress.com/2011/07/18/cq-sling-servlets-resourcetype/
-> http://sling.apache.org/site/servlets.html
-> http://blogs.adobe.com/aaa/tag/sling
and some threads from the forum:
-> http://forums.adobe.com/message/4943006#4943006
-> http://forums.adobe.com/message/4915799#4915799
By the way there is a lot of information which you can find in th network.
Regards,
kasq

How to increase the size of textbox in the .jsp page of Human Workflow

Hi All,
I need to increase the size of the textbox in the .jsp page of Human Task.
I am showint some text in the textbox which are currently not editable, and as the length of textbox is small, the complete text is not visible.
If anyone know how to customize the jsp page of Human Task, please share.
Regards,
Vivek

Thanks Eric,
but i think this one is different.
I am trying to edit the source of .jsp page in JDev. which has the code for textbox as below:
<%=getField(payload, form, context, thisDisabled, locale, task, "CustID", "/ns0:task/ns0:payload/ns1:Customer_Verification_Data/ns1:Company_Information/ns1:CustID", "string")%>
now how can i add some class format in .css file and how will i access that particular class in this textbox.
Thanks,
Vivek

How to view the JSP file from JBuilder 2007?

Hi,
I want to know that how to preview the JSP page from jbuilder 2007. whenever i am changing the jsp code, i would like to see the reflection in preview page. but i couldn't find that tab in jbuilder. Is JBuilder not supporting the preview feature ?? :-(
awaiting for your immediate response.
thanks
pannar

it's more likely because you lack even a basic understanding about both JBuilder and JSP.
If you have even a modicum of intelligence the documentation is enough to get you up and running, but don't expect it to be a how-to document that holds your hand every step of the way through implementing an entire application from scratch.
And no, we're not going to write something like that for you.

How to load only the jsp page even after applying template

Hi,
I have a webpage template with header,footer, Dynamic Menu etc. Now I assigned this .jtpl template to all my existing fases jsp files.
The problem is when I submit a form in jsp, the entire page including template gets loaded again by which we can notice significant time for loading menus and other things.
Is there any way to avoid this entire template loading and make only the jsp page to load? Please help
May be this can be achieved by frames. But I dont have idea on how I can merge template with frames. If someone can provide that even would help me better.
Thanks in advance.

Hi
I found the solution .
<html>
<head>
<script language="JavaScript">
function checkRefresh()
if( document.refreshForm.visited.value == "" )
alert('first ime');
// This is a fresh page load
document.refreshForm.visited.value = "1";
// You may want to add code here special for
// fresh page loads
else
</script>
</head>
<body onLoad="JavaScript:checkRefresh();">
<form name="refreshForm">
<input type="hidden" name="visited" value="" />
</form>
</body>
</html>

How to redirect a JSP page after the session is killed

Hello!
I am quite new to JSP. I have a question about how to redirect a jsp page after the session is killed. Could anyone help?
thanks a lot in advance!

You can't, directly. There's no connection betweenthe server and browser.
even after invalidating the session. we can do it
directly using the statement
response.sendRedirect("....");
or we can use the meta refresh tag.if session is invalidated and if we try to do response.sendRedirect(".. ") it throws IllegalStateException

How to use custome tag lib in the JSP page?

How to use custome tag lib in the JSP page?...with JDeveloper

http://www.oracle.com/webapps/online-help/jdeveloper/10.1.2/state/content/navId.4/navSetId._/vtTopicFile.working_with_jsp_pages%7Cjsp_ptagsregistering~html/

How to return the name (or ID) of the Task FLow in Script

Sitaution; two task flows created which can be accessed via Tools > TaskFlows within FDQM
Task Flow "1.1 Multi Load - Import" --> Should run Batch Process Up to Import (enmBatchProcessLevel: 2)
Task Flow "2.1 Multi Load - Import Up To Validate" --> Should run Batch Process Up to Validate (enmBatchProcessLevel: 4)
I have developed one generic script which I would like to use for each task flow.
Only the enmBatchProcessLevel differs between the task flows and therefore I would like to parse this enmBatchProcessLevel as a parameter my generic script.
To be able to do this, the script needs to know on which task flow a user has clicked. So, I am looking for a function or statement which returns the name (or ID) of the task flow. Based on this name (or ID) a conditional statement can be performed in which a variable is dynamically filled. This variable can then be parsed as a parameter to my generic script.
For instance:
Sub GenericRoutine
     Dim strTaskFlow
     Dim intBatchProcessLevel
     '--Get the Task Flow Name
     strTaskFlow = ......<How to return the TaskFlow name or ID?>
     '--Validate the task flow and fill variable intBatchProcessLevel dynamically
     Select Case strTaskFlow
          Case "1.1 Multi Load - Import"
               intBatchProcessLevel = 2
          Case "2.1 Multi Load - Import Up To Validate"
               intBatchProcessLevel = 4
     End Select
     '--Execute generic script
     '--Call Batch script and parse intBatchProcessLevel as a parameter:
     Call sBatchProcess(intBatchProcessLevel)
     '--Execute generic script
End Sub
Sub sBatchProcess(Byval intBatchProcessLevel)
     Dim lngProcessLevel
     Dim strDelimiter
     Dim blnAutoMapCorrect
     '--Use intBatchProcessLevel to fill lngProcessLevel
     lngProcessLevel = intBatchProcessLevel
     strDelimiter = "_"
     blnAutoMapCorrect = 0
     Set BATCHENG.PcolFiles = BATCHENG.fFileCollectionCreate(CStr(strDelimiter))
     BATCHENG.mFileCollectionProcess BATCHENG.PcolFiles, CLng(lngProcessLevel), , CBool(blnAutoMapCorrect)
End Sub
Edited by: user13642656 on Jul 21, 2011 4:55 AM

Hi, thanks for your reply.
The Generic script contains 600+ records, which I would like to maintain once, when having multiple Task Flows for Import, UpToValidate, ValidateOnly, UpToExport, ExportOnly etc.
Is there a central storage in FDQM workbench for script, like a "Module" in Excel VisualBasic environment? Thanks!

How to return the JSP page name

Similar Messages

Maybe you are looking for