How to return to position in DB

I have a DW site that has database access. The DB has grown
to about 3000 entries. When in the admin menu, I can edit
individual records and then click on update. The record is updated,
but then the next screen goes back to the top of the database. Is
there a way to instead go to the record that was just updated? If I
could have this feature, I would not have to page through the DB
listing to find where I left off.

Don't use dw record behaviors, so can't tell a short-cut
method.
The information you've given indicates that all 3000 records
are on one page
and after updating , when you go back to the main page you
want your cursor
to focus on the record that you just updated.
When you first select a record and click "edit" , the ID or
some other
unique value associated with that record gets sent, most
likely as a URL
parameter. The script then selects the record with that ID
and displays it
for editing.
After editing, when you click on "update" - Here you need to
change the code
to send the same ID back to the main page (the one with the
3000 records).
Over there you could use javascript to bring focus to the
record with the ID
(the value that got sent back from the edit page to the main
page). Unless
you have done some server-side scripting, it won't be as
simple to do this.
Also the javascript function that loops over the 3000 records
to compare the
ID will take a few secs to run that loop, so the page will
load slower.
The question that I should've asked first - What server side
script are you
using ?
If you can post the code of both web pages (the main page and
the editing
page) someone can maybe help you better.
You cannot lose until you give up !!!
"RobertBoy" <[email protected]> wrote in
message
news:[email protected]...
>I developed the admin pages using only DW. They consist
of a page to
>update,
> add, and delete. The update page uses the update record
behaviour. The
> add
> page uses an insert record behaviour, and the delete
page uses a delete
> record
> behaviour. The pages are very basic and don't really
need all the fancy
> formatting as only the administrator sees them. Hope
that explains what
> they
> are.
> Now, is there a way to go to the updated record after
updating one record?
>
> That does not sound clear, so I will explain further. In
my list of 3000
> records, I see one that needs updating. I have a link to
edit and one to
> delete at the right of each record (the links are part
of the repeat
> record
> behaviour). If I select "edit" that takes me to the
update record screen
> showing one record with each field able to be edited.
After making the
> change,
> I hit "update" and the record is updated and then I go
back to the start
> of the
> list of 3000 records. What I want to do is to hit
"update" and then go to
> the
> list of 3000, but instead of going to the start of the
list, I want to go
> to
> the record of the one I just updated. That way, I can
scroll down one
> down
> arrow click down and be at the next record in the
database. Hope this is
> clear
> now.
> Any ideas?
>

Similar Messages

How to return a profile in Game Center. where you want to enter the old nikneim?

How to return a profile in Game Center. where you want to enter the old nikneim?

It's not actually round. It is slight flattened vertically.
Anyway...
I have an Action that places guides at 50% (50pc) vertically and horizontally to give me the exact center of an image file, or you place them manually with View > New Guide.
After doing that I would place the circular select from that center point using Shift and Alt (Opt) and get it more or less where I wanted it. Then change the selection into a work path.
You can use Free Transform to reshape and position that work path by selecting it in the Paths panel.
Then place your text, and if you still need to fine tune, use Free Transform again, but on the Type layer.
You could also use Free Transform to reshape the BG graphic to make it round.

How to fix the position of controls, so table expands into whitespace and doesn't push lower controls down (invoice report in SSRS 2005)

I am designing an invoice report. There are some controls at the top of the report (company logo, date, invoice number etc), followed by a table listing the items in the invoice, followed by some controls at the bottom (subtotals, returns address etc). The report should always print onto a single page.
I want the controls at the bottom to have a fixed position on the page. There is sufficient whitespace between these controls and the table above for the table to expand to list many items. However whenever it expands it pushes the lower controls down. This results in them spilling onto a second page.
Is there a way to fix the position of controls and suppress the "gets pushed down when controls above expand" effect?

Thanks for that. I found a good solution using rectangles here: SQL Server 2005: Report Design Best Practices and Guidelines
Here's the relevant part (see underlining):
Using Rectangles to Keep Objects Together
Rectangles in Reporting Services can be used either as graphical elements or as containers of objects. As object containers, they keep objects together on a page and control how object move and push each other.
To keep multiple objects together on a page, put the objects within a rectangle. You can then put a page break before or after the rectangle by using the PageBreakAtStart or PageBreakAtEnd properties for the rectangle.
Using Rectangles to Control Item Growth and Displacement
Items within a rectangle become peers of each other and are governed by the rules of how peer items are positioned on the page as they move or grow. For example:
Items will push or displace each other within the rectangle.
Items will not push or displace items outside the rectangle, because they are not their peers.
If necessary, a rectangle will grow to accommodate the items it contains.
You can use this logic to your advantage when dealing with objects that expand. For example:
If you want to leave a blank space in your report for a table to expand into, group the blank space and the table in the same rectangle. When the table grows, it will push the blank space .
If you want to prevent a matrix from pushing items off the right edge of the page, put the matrix within a rectangle with blank space to its right. Now, the matrix is no longer a peer to the other item on the page and will not be able to push it until the matrix can no longer be contained within its rectangle.

[UIX] How To: Return multiple values from a LOV

Hi gang
I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
I'll base my example on the hr schema supplied with the standard RDBMS install.
Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
To meet this requirement follow these steps:
1) In your ADF BC model project, create 2 EOs for employees and departments.
2) Also in your model, create 2 VOs for the same EOs.
3) Open your employees VO and create a new attribute DepartmentName. Check selected in query. In expressions type (SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id). Check Updateable always.
4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="${bindings.DepartmentId.path}"
    destination="lovWindow0.uix"/>Change it to be:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="DepartmentId"
    destination="departmentsLov.uix"
    partialRenderMode="multiple"
    partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
<messageTextInput
    id=DepartmentName
    model="${bindings.DepartmentName}"
    columns="10"
    disabled="true"/>12) Open your departmentsLov.uix page.
13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
17) View the LOV pages source, and change the lovUpdate event as follows:
<event name="lovSelect">
    <compound>
        <set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
        <set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
    </compound>
</event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
<event name="lovUpdate">
    <compound>
        <set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
        <set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>
    </compound>
</event>Thats it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
A couple things to note:
1) In the messageLovInput id field we dont use the .path notation. This is mechanism for returning 1 value from the LOV and is useless for us.
2) Again in the messageLovInput we supply _uixState as an entry in the partialTargets.
3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
Im not going to take the time out to explain these 3 points, but its worthwhile you learning more about them, especially the last 2, as a separate exercise.
One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list MessageBox. In turn locate the messageBox control on your page (if any), and supply an id=MessageBox. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
I hope this works for you :)
Cheers,
CM.

Thanks Chris,
It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
Can someone help me out out here?
Kind regards
Ido

How to return a single datetime from multiple rows of MAX(value) in DAX

Hi
I have a Results table with ResultTime, Balance, Equity which is updated with a new row every 5 minutes. I've used SUMX to find opening and closing balances and it has worked so far.
Res_OpeningBalance:=SUMX(TOPN(1,Results,Results[ResultTime],1),[Balance])
Res_ClosingBalance:=SUMX(TOPN(1,Results,Results[ResultTime],0),[Balance])
But when I tried it with dates, the whole thing fell apart.
Res_MaxBalance_Date:=SUMX(TOPN(1,Results,Results[Balance],0),[ResultTime])
Since the highest Balance is likely to be represented through many rows due to it lasting more than 5 minutes, ResultTime (which is unique to each row) is summed up and returns messed up dates well into the future. How to return only one date (first or last
datetime) from the rows where Balance is at max?
I tried a TOPN of TOPN, but Excel was not amused.
=SUMX(TOPN(1,Results,Results[Balance],0),TOPN(1,Results,Results[ResultTime],0))
TIA!
Re
Dennis

I still don't understand RANKX, but I figured it out anyway. I get the correct data by using:
Res_MaxBalance:=MAX(Results[Balance])
Res_MaxBalanceDate:=CALCULATE(MAX(Results[ResultTime]),FILTER(Results, Results[Balance]=MAX(Results[Balance])))
Res_MinBalance:=MIN(Results[Balance])
Res_MinBalanceDate:=CALCULATE(MAX(Results[ResultTime]),FILTER(Results, Results[Balance]=MIN(Results[Balance])))
Res_MaxEquity:=MAX(Results[Equity])
Res_MaxEquityDate:=CALCULATE(MAX(Results[ResultTime]),FILTER(Results, Results[Equity]=MAX(Results[Equity])))
Res_MinEquity:=MIN(Results[Equity])
Res_MinEquityDate:=CALCULATE(MAX(Results[ResultTime]),FILTER(Results, Results[Equity]=MIN(Results[Equity])))
Re
D

How to return a html repsonse after form guide rendering in browser?

How to return a html repsonse after form guide rendering in browser indicating that server has recieved transmission and request is submitted succesfuly?
I am rendering the form guide in browser using guide invoke service and when i submit the data in browser to server through guide , it is displaying some random number in browser?
i need to display a resposne that request is submitted successfully?

how could i define a variable with "html data" ?
Create a variable of type document and then a service to read the html from where ever it's located. If you put it in LiveCycle, you can use the ReadRessource service. If it's on the file system, you can use the Read Document. If it's in the database, you can use the JDBC service.
Also, one more doubt where should i use this variable in my process to get the same?
You want the response once you've submitted the data, so the html is really the result of calling the process that's processing the data. So I would create an output variable of type document on that process.
Right now it displays a random number in the browser because your submit process is long lived. When a process is long lived (asynchronous), you invoke it and then you get an identifier back. It's kind of a fire and forget. You can use that identifier to check the status of the long lived process, since long lived processes can take hours, days to complete. You don't want your browser to wait that long, hence the identifier.
However if you change the process to be short lived (synchronous), the browser will wait for the result of the process, which really means the output variables for that process. If your output variable contains html, it'll display html.
So the key is make you submit process short lived and populate the output variables appropriately.
Jasmin

How to return more than one value from a function

hello everybody,
Can anyone tell me how to return more than a single value from a function, the problem is i have 4 points,
2 points form one line ,another 2 points form 2nd line ,each point is 3 dimensional(x,y,z coorinates) so i will pass these values to func(x1,y1,z1,x2,y2,z2,x3,y3,z3,x4,y4,z4), i will find the point of intersecton of two lines and i will get it as x,y,z , now how to return these 3 coordinates,usually the function returns only one value, please help me to solve it out.
Thanks.

I think the easiest way or trick here is (easiest isn't always the best as we know, but atleast this one will work) to create simple data array. and pass that. Create an array with:
<code>
class justArray {
int x=0
int y=0;
int z= 0;
...somewhere
justArray[] points= new justArray[4];
points[0].x= ..
points[0].y= ..
points[0].z= ..
points[1].x= ..
return points[]
</code>

Need ideas on how to return display back to normal

Any suggestions on how to return the display back to normal setting on my Mac OS X, my cat "pawed something on the keyboard and now everything is stretched so big I have to scroll way down to get to the dock and way over to see what's on the sides. Then my daughter tried to fix it and the display is now a square center with the black sides cut off. Any idea are greatly appreciated!

First try opening the Universal Access System Preferences and check the'Seeing' options. It's possible that the 'Zoom' option has been enabled. If that's what happened then you should be able to hold down the command and option keys, then press the '-' and '=' keys to zoom the image in and out. Hopefully that is all that is needed.
You should also check the Display System Preferences to make sure that you are set to the native resolution of your panel (should be the highest highest resolution listed).

HELP!! How to get the position of active windows in the desktop

How to get the position of active windows in the desktop

You mean, active windows other than the program you're running, or windows the program puts there? And a real desktop (like where MyComputer is), or a desktop pane?

How to change the position of a window created in the script?

Hello to all
A window called from another window are the same size. How can change the position of the window relative to the caller call window?

That is worked, but for abs.coord. How make releative coord.?
When I include that in my script, window show without elements ! See attachments №2

Stored procedure: how to return multline table

Environment: SQL Server 2008 R2, Windows
Tools: MSMS 2008 R2
Code:
CREATE PROCEDURE [dbo].[Cleanup]
(@id CHAR(12)
,@Date DATETIME
,@ID int OUT
,@Ln_ID CHAR(10) OUT
,@qcdate DATETIME OUT
,@P4 VARCHAR(8000)OUT
,@P9 VARCHAR(8000) OUT
,@P11 VARCHAR(8000) OUT
) WITH ENCRYPTION
AS
BEGIN
Update Table_mocha
SET P4=Replace(PE4,RTRIM(Cast(Q_ID as varchar(10))), '')
where id=@id and order_dt=@Date
Update Table_mocha
SET P4 = NullIf(P4,'')
where id=@id and order_dt=@Date
Update Table_mocha
SET P4=LTRIM(RTRIM(P4))
where id=@id and order_dt=@Date
SELECT @id=id, ln_id=@ln_id,@p4=p4, @p9=P9,@p11=P11
where id=@id and order_dt=@Date
Problem: having three updates would cause the database to lock. How would I pass input paramaters for those three updates in SP. How would I update multiple tables, how to avoid database lock, how to return multi-statment table - value (display
table contains multiple records)

I prefer to use different stored procedures to do different things.
CREATE PROCEDURE [dbo].usp_updatedata
(@id CHAR(12)
,@Date DATETIME
AS
BEGIN
Update Table_mocha
SET P4=LTRIM(RTRIM(Nullif(Replace(PE4,RTRIM(Cast(Q_ID as varchar(10))), ''),'')))
where id=@id and order_dt=@Date
End
CREATE PROCEDURE [dbo].usp_getData
(@id CHAR(12)
,@Date DATETIME
AS
BEGIN
SET NOCOUNT ON;
SELECT id, ln_id,p4, P9,P11
where id=@id and order_dt=@Date
End

How to return a pdf (iText) file using Portlet?

Dear all,
I want to know how to return a pdf file using iText API via Portlet.
I can manage to return a pdf file through a standalone servlet, but I don't have idea of how to generate a pdf file via Portlet.
Can anyone help me?
Thanks
George (HK)
Welcome to my blog at www.xanga.com/georgelkh

Hello,
that is easy. In your driver program, please check the inputs of the job/ generator function modules.
You provide GETPDF = 'X' attribute what will make the FM not to print the form or display the preview but to return the binary stream of the PDF data (type FPCONTENT) what is a RAW or something. Next look for the PDF output parameter to get the returned binary data and send it as you wish through JCo.
Regards Otto
p.s.: Note there is Adobe forms forum under NetWeaver, you can find me and the others doing Adobe every day

How to return the name (or ID) of the Task FLow in Script

Sitaution; two task flows created which can be accessed via Tools > TaskFlows within FDQM
Task Flow "1.1 Multi Load - Import" --> Should run Batch Process Up to Import (enmBatchProcessLevel: 2)
Task Flow "2.1 Multi Load - Import Up To Validate" --> Should run Batch Process Up to Validate (enmBatchProcessLevel: 4)
I have developed one generic script which I would like to use for each task flow.
Only the enmBatchProcessLevel differs between the task flows and therefore I would like to parse this enmBatchProcessLevel as a parameter my generic script.
To be able to do this, the script needs to know on which task flow a user has clicked. So, I am looking for a function or statement which returns the name (or ID) of the task flow. Based on this name (or ID) a conditional statement can be performed in which a variable is dynamically filled. This variable can then be parsed as a parameter to my generic script.
For instance:
Sub GenericRoutine
     Dim strTaskFlow
     Dim intBatchProcessLevel
     '--Get the Task Flow Name
     strTaskFlow = ......<How to return the TaskFlow name or ID?>
     '--Validate the task flow and fill variable intBatchProcessLevel dynamically
     Select Case strTaskFlow
          Case "1.1 Multi Load - Import"
               intBatchProcessLevel = 2
          Case "2.1 Multi Load - Import Up To Validate"
               intBatchProcessLevel = 4
     End Select
     '--Execute generic script
     '--Call Batch script and parse intBatchProcessLevel as a parameter:
     Call sBatchProcess(intBatchProcessLevel)
     '--Execute generic script
End Sub
Sub sBatchProcess(Byval intBatchProcessLevel)
     Dim lngProcessLevel
     Dim strDelimiter
     Dim blnAutoMapCorrect
     '--Use intBatchProcessLevel to fill lngProcessLevel
     lngProcessLevel = intBatchProcessLevel
     strDelimiter = "_"
     blnAutoMapCorrect = 0
     Set BATCHENG.PcolFiles = BATCHENG.fFileCollectionCreate(CStr(strDelimiter))
     BATCHENG.mFileCollectionProcess BATCHENG.PcolFiles, CLng(lngProcessLevel), , CBool(blnAutoMapCorrect)
End Sub
Edited by: user13642656 on Jul 21, 2011 4:55 AM

Hi, thanks for your reply.
The Generic script contains 600+ records, which I would like to maintain once, when having multiple Task Flows for Import, UpToValidate, ValidateOnly, UpToExport, ExportOnly etc.
Is there a central storage in FDQM workbench for script, like a "Module" in Excel VisualBasic environment? Thanks!

How to return jolt connection back to the joltpool?

hi
I used following codes to get joltconnection pool:
SessionPool sessionPool = sessionPoolManager.getSessionPool(poolName);
     DataSet request = new DataSet(requestString.length()*2);
     request.setValue("STRING", requestString);
     Result result = sessionPool.call(serviceName, request, null);
     return (String) result.getValue("STRING", null);
my question is : how to return jolt connection back to the joltpool? do I need
to do that?
when I used jdbc connection pool, I used conn.close() to return
to jdbc connection pool. Is there any method like "close()" in
jdbc connection?
Wei Jiang

Hi,
The below is the simple source code using Pool which it is extracted from
BEA's support web site.
and it is helpful.
The Pool doesn't need to return jolt connection back to the joltpool.
because it is done by Pool Manager automatically.
import bea.jolt.*;
import bea.jolt.pool.*;
public class Pho2 {
public static void main(String argv[])
try
String[] adresses = new String[1];
adresses[0] = "//aglaia:7040";
// creation du manager et du pool par defaut
SessionPoolManager sessionPoolManager = new SessionPoolManager();
int i = sessionPoolManager.createSessionPool(adresses, null, 1, 3, new
UserInfo(), null);
SessionPool sessionPool = sessionPoolManager.getSessionPool(null);
DataSet dataset = new DataSet();
Result result=null;
dataset.setValue("rhaine","coucou");
try
result = sessionPool.call("TOUPPER", dataset, null);
catch(Exception Ex)
System.out.println("session");
Ex.printStackTrace();
System.out.println("dataset="+dataset);
System.out.println("result ="+result);
System.out.println("ApplicationCode="+(new
Integer(result.getApplicationCode())).toString());
catch(Exception Ex)
System.out.println(Ex.getMessage());
Hope this helps.
Mr, Ko.
"wei jiang" <[email protected]> wrote in message
news:[email protected]..
>
hi
I used following codes to get joltconnection pool:
SessionPool sessionPool = sessionPoolManager.getSessionPool(poolName);
DataSet request = new DataSet(requestString.length()*2);
request.setValue("STRING", requestString);
Result result = sessionPool.call(serviceName, request, null);
return (String) result.getValue("STRING", null);
my question is : how to return jolt connection back to the joltpool? do Ineed
to do that?
when I used jdbc connection pool, I used conn.close() to return
to jdbc connection pool. Is there any method like "close()" in
jdbc connection?
Wei Jiang

How to Maintain Organizational Position of an Employee in PA30

Hi SAP Gurus,
I want to maintain PA30 of an Employee but i don't know how to maintain Organizational Position of an Employee in PA30.
I have maintained values in IMG in Personnel Management-Personnel Administration-Organizational Data-Organizational Assignment-Organizational Plan-Define positions
But when iam trying to take values in PA30 maintained by me in define positions then (with the help of F4) it is not showing the values maintained by me.
Kindly help me for the above
Regards,
Amitabh

hi
1.step1: ppoc_old
2.Step2:it will ask for Name of the org unit to create
3.give name and press F8
then u can see the name of ur organization and underwhich create the depts
after that
press staff assignments
create the positions
do it first
regards
partha

How to return to position in DB

Similar Messages

Maybe you are looking for