How to reverse Transport requests from sand box to development client

Dear all,
I am doing some testing on Sand box, I made some transport requests from development to sandbox, which effected some settings in sandbox.
Now I want to reverse those transport request from sand box to development, unfortunately I didn't make any note of transport requests which I transported from Development to Sandbox.
Please educate me how to reverse transport requests from sand box to development.
your suggestions are highly appreciated
thank you
Venu Gopal

There is no reverse, you have to create a new transport with the original settings.
Programs keep track of their versions and are easier to pull a previous version, configuration can be tougher, open all the folders in SE10 to see if you can determine the configuration changes.

Similar Messages

  • How to reverse transport request

    Hi Experts,
    We transported some changes from quality to development. Now we realized that, we dont want those changes in Development.
    Plz suggest me, Is there any procedure to reverse this transport request?
    Thanx in advance.
    Rgds,
    Ram

    Hi Reddy,
    You can't Reverse transport request.
    But there is a work around to get back your old changes or format.
    For EX: if you have transported any infoobject or any cube .. there is a chance of getting back the old changes through the Version comparison.
    http://help.sap.com/saphelp_nw70/helpdata/en/a9/7e2ae837e511d5b3bf0050dae02d7c/content.htm
    Hope this Link helps you verymuch...
    In the above it has clearly been mentioned on Version management.
    Regards,
    Ravi Kanth

  • Transfering data from sand box to development server

    Hi, we created some production orders using co01 t-code in sand box. we would like to copy / move those orders in development server. is it possible? if yes pls guide me. thanking you in advance.

    Yadav,
    Please tell us why do you want to move the production order from sandbox to development?? The number ranges and other stuff would be completely different in both the environments and hence it would be difficult to copy ONLY the production order. Also production order is a transactional data.
    The other option would be to apply the transport that you created in sand box to development box..this way the config will be there and now you can create all the required master data in development box and then create the production order.
    Try and revert back.
    Regards,
    Swapnil

  • Copy transport Request from Devlopment to Sand Box

    Hi All,
    Is there any way to move transport request from one system i.e. Development to Sandbox system(another system) without release.
    Regards,
    Manmohan

    Hi,
    If you do not want to release your actual transport request. Alternatively you can create transport of copies, release that, and test it on dev system.
    In case testing is successful, you can release your actual transport and move it across.
    If it is not, make the necessary changes and still you can record the changes in your actual transport request as you haven't released yet.
    cheers !!!
    Ashish

  • How to transport requests from development  to production server

    hi gurus
    i am new to SDN
    can u pls give me detailed information how to transport requests from development server to production server?if possible give me screen shot documents
    regards
    surya

    Hi
    Transporting
    There are help pages that discuss creation of transports.
    In simple terms, you: create a transport package
    add objects to the package  export the package, plus optionally any related objects to a predefined folder/directory on the portal server into a file with an extension of .EPA copy the .EPA file to the import folder of your QA system and import it  test the contents on the QA system  copy the .EPA file to the import folder of your production system and import it  Create a transport package file
    Here is the step by step procedure to create a transport package:
    For Export
    1. Go to system administration, and click on transport?export.
    2. In the middle pane, select the folder you want to export and right click on the Transport Package. 3. Fill in the General Properties i.e the name of the package, id and description. 4. And say finish and open the object for editing.
    5. When the object has been opened then right click on the object you want to transport, and say "Add object to the Transport Package".
    6. Check the checkbox of the item u have added and see the properties if it has been added properly. 7. Now click on the save button.
    8. After the object is saved, click on the export button. 9. U will have an option to select where to store the .epa file which will be generated. U can overwrite an existing one by selecting the browse button, or store it with the generated name in the location it automatically generates. 10. Now Click on the Start Export button.
    11. once the export is completed, it shows a report on how much time is taken to generate the .epa file. 12. Here there is an option for downloading the .epa file. Click on the link and download the file. This file is ready to be uploaded into any other EP Server.
    For Import:
    Pre-requisites: You have to copy the .epa file created while export into the local drive. Optionally, you have to manually copy the .epa file generated in the export function into the Import directory of the server ie. chooseFollow the steps below for importing a certain file. 1. Go to System Administration in the portal, and click on Transport?Import. 2. For the source of the package, Click on the radio button Server for the .epa file you have copied lately. Else, click on the radio button on client if you are operating in the client and select the .epa file you have stored on the local drive. 3. Now select the file from the browse option and click on Upload.
    4. Now click on the import button. 5. Once the import process is finished, the report is shown. In the whole process, the par files are not included in the .epa files. For the par files to be included into the .epa files then we have to change the pcdStartup.properties file in the server. The property to be changed is Pcd.TransportApplication.Export.ExcludeObjectTypesAfterRuleProcessing: Keep this property's value as empty for enabling the par files to be uploaded into the .epa. You can check for this property in the portal in the following -System Administration-Support-Portal Content Directory-PCD Configuration.

  • Hi,how can i transport objects from one server to other like (Dev To Qty)

    Hi Sir/madam,
       Can u explain how can i transport objects from one server to other like (Development To Quality To Production).
    Regards,
    Vishali.

    Hi Vishali,
    Step 1: Collect all Transports(with Packages) in Transports Tab(RSA1)- CTO
    Step 2: Release the subrequests first and then the main request by pressing Truck button
    Step 3: STMS or Customized transactions
    Object Collection In Transports:
    The respective Transports should have the following objects:
    1. Base Objects -
    a. Info Area
    b. Info object catalogs
    c. Info Objects
    2. Info Providers u2013
    a. Info Cubes
    b. Multi Providers
    c. Info Sets
    d. Data Store Objects
    e. Info Cube Aggregates
    3. Transfer Rules u2013
    a. Application Components
    b. Communication Structure
    c. Data Source replica
    d. Info Packages
    e. Transfer Rules
    f. Transformations
    g. Info Source Transaction data
    h. Transfer Structure
    i. Data sources (Active version)
    j. Routines & BW Formulas used in the Transfer routines
    k. Extract Structures
    l. (Note) If the transfer structures and related objects are being transferred without preceding
    Base Objects transport (e.g. while fixing an error) it is safer to transport the related Info
    Objects as well.
    4. Update Rules u2013
    a. Update rules
    b. Routines and formulas used in Update rules
    c. DTPs
    5. Process Chains u2013
    a. Process Chains
    b. Process Chain Starter
    c. Process Variants
    d. Event u2013 Administration Chains
    6. Report Objects u2013
    a. Reports
    b. Report Objects
    c. Web Templates
    Regards,
    Suman

  • How to create transport request in object transport

    How to create transport request in object transport from server to server
    thanks in advance
    arya

    hi,
    when ever u r creating any object in devlopment and saving it will ask for request.create request and release in se09.
    put mail to basis people to transport ,thy will transport using STMS transaction.

  • Transport request from one server to another

    Hi All, We have two servers AB1 and AB2. We would like to transport request from client 101 (AB1) to client 110(AB2). How do i make transport route between these two servers. Thanks, Sam

    Hi Sam,
    You need to configure Transport Management System between these two system by following Configuring TMS - Software Logistics - SAP Library and by considering below detailed steps:
    1. After SAP Gui installed. (Development system is always domain controller.)
    2. Logon to Client :000User: DDIC.Pwd: ******
    3. Put a T-code (se06) in the command field
    4. Click standard installation and click post installation (yes)
    5. Put a T-code (STMS) in the command field and give a description then save it.
    6. Click System overview push botten, click extras option from the menu and click Distribute and activate configuration. (Yes)
    7. Back to the stms main screen and click Transport routes from the push botten
    8. Click Configuration button from the Menu.
    9. Click Distribute and activate from the configuration menu.
    10. Now your sap system is activate in domain controller.
    11. Now logon to QAS system.
    12. Client: 000User: DDICPwd: ****
    13. Put a T-code (se06). In the command field.
    14. Click standard installation and click post installation (yes)
    15. Put a T-code (STMS) in the command field.
    16. Click other Configuration push butten in the bottom of appear screen.
    17. Give information about development system.
    18. Then save it. OK
    19. Now QAS is waiting for include domain controller.
    20. Logon to Development system.
    21. Click system overview push butten.
    22. Click sap system from the menu.
    23. Select the QAS systems.
    24. Click Approve butten from the sap system menu.
    25. Now QAS is member system of domain Controller.  (Development system)
    26. Suppose if you want configuring Production also, following the same step in the QAS.
    Also you can follow links SAP Basis Tutorials/ Training: Transport Management System ( TMS ) Configuration In SAP Step By Step With Snap Shots
    Hope this will help you.
    Regards,
    Gaurav

  • To revert back a transport request from prd to dev server

    hi experts
        how to revert back a transport request from prd server to
        dev server?
        a transport request has been wrongly transported
        and it has make major changes in production server,
       now  we want to revert back that request , we know the   request no.
    regards
    pankaj

    All you have to do is create an order of transport type "Transport of copies" in PRO.
    I give you the steps to follow:
    1. Go to SE01 and create a new order (remember the type "Transport of copies").
    2. Enter the data of the order of transport that is going to come back.
    3. Enter the target, here is where you asign the target system to carry the request.
    4. Now just add the number of request to the new request you just created.
    5. Finally released the request from this transaction.
    6. Check on the queue of transport in DES, the request must appear there.
    I hope you serve =)

  • How to install transport request files into the SAP system

    Hi Experts,
                    I want to install transport request files into my SAP source and target system . I am from BW/BI background so can anyone help me out with the step by step procedure for the above installation.
    Thanks in advance
    Regards
    Shiva

    Hi,
    What I understand is, you want to transport request from one server to another.
    for example, Development to Qualtiy or Quality to Production.
    For this your transport system must be configured. Please search help.sap.com or google for "How to configure Transport System (STMS)".
    If you want to copy transport request from one system to another system which is not in your landscape, you need to physically move/copy transport request (cofile and datafile) to the target system in /usr/sap/trans/cofiles and /usr/sap/trans/data
    Then import that request using SCC1.
    You can alos perform TEST import for result.
    Regards.
    Rajesh Narkhede

  • Move transport requests from one landscape to another

    HI Gurus,
       I am facing a situation where i need to import the Transport Request from one landscape to another.
        Consider i have two  landscapes DE1 TE1 PE1  and  DE2 TE2 PR2. and both the landscapes are on
        different release.
         I have created a Transport Request DE1Kxxxxxx.
         And now i want to use this transport request in the other landscape of DE2 TE2 PR2.
       How can i do that. Is there any process in using the Transport Request created in another landscape of different release.
    Please guide me.
    Thanks in Advance,
    Sachin Kumar.

    Hi,
    Just do manual copy of both data and cofile to second landscape...there you need to change the naming conventions(SID)....But it will works only that is a customizing request...cause developments will depends upon installation nubers....
    warm regards
    Harish K Reddy

  • Transporting requests from development server to production server

    Hi gurus,
    can anyone tell me how to transport requests from development server to production server.

    You can use SAPGUI now instead of calling tp at OS level.
    Serious: Totally wrong forum!

  • Regarding Transport request from system to file or product CD

    Hello Gurus,
    Can anyone tell me how to transport transport request from  system to file or product CD.
    It is urgent.
    Thanks in advance.
    Best Regards,
    zubera

    Hi Albert,
    Thanks for your reply.
    I want to know the steps how to tranport TP ( tranport request ) from system to file.
    Please can you detail procedure or any link to transport TP from SAP to file and file to SAP system.
    Thanks in advance.
    Best Regards,
    zubera

  • How to track Transport request released

    hi Experts,
    How to track Transport request released from one development system (D01)to another
    development (D02).
    is there any way we get know .
    Amit

    Hi,
           From SE09 & SE10 you track the transport requests, and even you can find the transport request details from the following database tables.
    E070                             Change & Transport System: Header of Requests/Tasks
    E070A                            Change & Transport System: Attributes of a Request
    E070CREATE                       Change & Transport System: Creation Date of Request
    E070DEP                          Change & Transport System: Dependencies of Requests
    E071                             Change & Transport System: Object Entries of Requests/Tasks
    E071C                            Change & Transport System: Client-Specific Lock Flag
    E071E                            Lang. Transport: Positive List for Generic Object Selection
    E071K                            Change & Transport System: Key Entries of Requests/Tasks
    E071KC                           Change & Transport System: Key Entries of Requests/Tasks
    E071KF                           Change & Transport System: Nametab Info. on (CHAR)Key Fields
    E071KFINI                        Change & Transport System: Nametab Info. on (CHAR)Key Fields
    E071K_30                         Change & Transport System: Key Entries of Requests/Tasks
    E07T                             Change & Transport System: Short Texts for Requests/Tasks

  • Create/split transport request from existing request

    Hi
    I want to know how to create/split  transport request from existing transport request in ECC 6.0
    Regards
    Kumar

    hai kumar,
    split the request means ?
    u can assign objects of one request to another  and merge two requests
    but u cant split one requet in to , u can assign task from one request to another
    u have lot fo options just search in menu and u get them
    regards
    m.a

Maybe you are looking for