How to run a select count(*) with multiple rows returned

Hi,
I have to run a select count(*) for different reports.
1) Select count(*) from table
where state = 'CA'
2) Select count(*) from table
where state = 'NY'
3) Select count(*) from table
where state = 'NV'
Instead of running this query again for 50 times, is there a way for me to just put it in one query and get multiple row returns? Thank you.

Samantha wrote:
Hi,
I have to run a select count(*) for different reports.
1) Select count(*) from table
where state = 'CA'
2) Select count(*) from table
where state = 'NY'
3) Select count(*) from table
where state = 'NV'
Instead of running this query again for 50 times, is there a way for me to just put it in one query and get multiple row returns? Thank you.select state, count(*) from table group by state order by 1;

Similar Messages

How do i take one layer with multiple selections...

how do i take one layer with multiple selections and make those selections their own layer?

Yes sir. It w was really hard to explain. It is discontiguous segments that are separated by transparent areas. And I want those non transparent areas to be on their own layer. I have a photo shop file that has a bunch of buttons on them and they are on a transparent background. It is one layer. I want to select all the buttons and put them on their own layers. I can do this manually by selecting a button and cmd Just to a new layer, but when I have 200 buttons it is a daunting task.
Sent by MailWise<http://www.mail-wise.com/installation/4> – Your emails, with style.

HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Creating Select List with multiple columns

I want to create a select list with multiple columns. I followed the demo application model described in the by Denes Kubicek (Currently my reference for APEX !!)
The code is as follows:
CREATE OR REPLACE FUNCTION getcrops(p_cropid IN NUMBER)
RETURN VARCHAR2
IS
v_cropid VARCHAR2 (400);
v_fcode VARCHAR2 (400);
v_product VARCHAR2 (400);
v_var VARCHAR2 (400);
v_fname VARCHAR2 (400);
v_acres VARCHAR2 (400);
v_style_start VARCHAR2 (400);
v_style_end VARCHAR2 (400);
v_return VARCHAR2 (400);
BEGIN
FOR c IN (select "CROP"."CROPID" as "CROP ID",
     "CROP"."FIELDCODE" as "FIELD CODE",
     "CARROTPRODUCTLIST"."CARROTPRODUCTNAME" as "PRODUCT",
     "VARIETYLIST"."VARIETYNAME" as "VARIETY",
     "FIELD"."FIELDNAME" as "FIELD NAME",
     "CROP"."SIZEINACRES" as "ACRES"
from     "FIELD" "FIELD",
     "CARROTPRODUCTLIST" "CARROTPRODUCTLIST",
     "VARIETYLIST" "VARIETYLIST",
     "CROP" "CROP"
where "CROP"."CARROTPRODUCTTYPE"="CARROTPRODUCTLIST"."CARROTPRODUCTID"
and     "CROP"."VARIETYID"="VARIETYLIST"."VARIETYLISTID"
and     "CROP"."FIELDID"="FIELD"."FIELDID")
LOOP
v_cropid := TO_CHAR (c.'CROP ID', 'FML999G999G999G999G990');
v_fcode := c.'FIELD CODE';
v_product := c.'PRODUCT';
v_var := c.'VARIETY';
v_fname :=c.'FIELD NAME';
v_acres :=c.'ACRES';
FOR i IN 1 .. 12 - LENGTH (c."CROP ID")
LOOP
v_cropid := v_cropid || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'FIELD CODE')
LOOP
v_fcode := v_fcode || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'PRODUCT')
LOOP
v_product := v_product || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'VARIETY')
LOOP
v_var := v_var || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'FIELD NAME')
LOOP
v_fname := v_fname || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'ACRES')
LOOP
v_acres := v_acres || ' ';
END LOOP;
v_return := v_cropid || v_fcode || v_product || v_var || v_fname || v_acres;
END LOOP;
RETURN v_return;
END;
I created this anonymous Pl/SQL function at a application level ..Then I followed up to create a select list with a function inside. However I could not create select list with the command suggested in the demo which is
select getcrops(cropid) d, cropid r from crop;
APEX (2.1) returns a error message. What am I missing ? Should the function be called from somewhere else after creating a regular select list..? Where the functions (Pl/SQL) should be ideally stored for application level access..? and for across application level access ? How can I check the function works good. Help is appreciated.

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

Selection list with multiple columns

How can i create a selection list with multiple columns?

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

Select or deselect multiple rows with one single selection event

Does anyone know how to create a JTable which can select or deselect multiple rows with one single selection event in JTable. Fore example, if the table has
row1
row2
row3
row4
row5
row6
What I need is when user select row1 or row2, both row1 and row2 should be set to be selected. Then if user press CTRL and click one of row3 or row4, both of them should be selected including the previouse selected row1 and row2.
For deselection, if row1 and row2 are selected, when users deselect one of row1 or row2, both of them should be deselected.
Hopefully someone can give me a hint.

Here is a partial solution using a JList. Only one line gets highlighted when the user makes a selection in the list. But, two lines are returned. There is a blank line between every two lines.
     private void addLineToList() {
          String a = f_one.getText();
          String b = f_two.getText();
          if (a.length() == 0) {
               Utils.showInformationMessage("Item field is empty.");
               f_one.requestFocusInWindow();
               return;
          if (b.length() == 0) {
               Utils.showInformationMessage("Match field is empty.");
               f_two.requestFocusInWindow();
               return;
          model.addElement("item: " + a);
          model.addElement("match: " + b);
          model.addElement(" ");
          int size = model.getSize();
          pairList.setSelectedIndex(size - 3);
          f_one.setText("");
          f_two.setText("");
          f_one.requestFocusInWindow();
     private void editList() {
          if (pairList.getSelectedValue().toString().equalsIgnoreCase(" ")) {
               Toolkit.getDefaultToolkit().beep();
               f_one.requestFocusInWindow();
               return;
          if (!f_one.getText().equals("")) {
               int result = JOptionPane.showConfirmDialog(this,
               "The Item field contains text. Replace the text?",
               "Flash Card Activity", JOptionPane.YES_NO_OPTION,
               OptionPane.INFORMATION_MESSAGE);
               if (result == JOptionPane.NO_OPTION) return;
          if (!f_two.getText().equals("")) {
               int result = JOptionPane.showConfirmDialog(this,
               "The Match field contains text. Replace the text?",
               "Flash Card Activity", JOptionPane.YES_NO_OPTION,
               JOptionPane.INFORMATION_MESSAGE);
               if (result == JOptionPane.NO_OPTION) return;
          String item = "";
          String match = "";
          int index = pairList.getSelectedIndex();
          String choice = model.getElementAt(index).toString();
          if (choice.startsWith("item")) {
               item = choice;
               match = model.getElementAt(index + 1).toString();
               model.remove(index);
               model.remove(index);
               model.remove(index);
          else {
               item = model.getElementAt(index - 1).toString();
               match = choice;
               model.remove(index + 1);
               model.remove(index);
               model.remove(index - 1);
          int size = model.getSize();
          if (size > 2) {
               pairList.setSelectedIndex(size - 2);
          f_one.setText(item.substring(6));
          f_two.setText(match.substring(7));
          f_one.requestFocusInWindow();
     }

How can i create excel sheet with multiple tabs using utl file?

how can i create excel sheet with multiple tabs using utl file?
any one help me?

Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

See this page for helpful information.
http://samsoft.org.uk/iTunes/grouping.asp
B-rock

How to Run a SCSI Scanner with Firewire In OS X?

Does anyone know how to run a SCSI scanner with Firewire in Mavericks?
I have unsuccessfully tried the RATOC FR1SX SCSI-to-Firewire converter. The Ratoc is recognized as a Firewire device in the System Profiler (see pic below). However, the VueScan scanning software does not recognize the scanner. I know the scanner works because I have been using it in an old HP PC. As such I installled Windows 7 64 bit via Boot Camp to see if I could use the scanner, but had no luck.
I have an iMac 21.5-inch, Mid 2010.
ANY HELP?

The Mac scanner driver is not seeing it as a native SCSI device assuming VueScan supports the model of scanner you have. (You did not list the scanner model.)
Other than getting a modern non-SCSI scanner, a possible option would be to get a Thunderbolt PCI expansion chassis and a 'real' SCSI interface card. There is no guarantee this will work though as SCSI has been discontinued in the Mac world for years and years. If you then want to look at a SCSI card for use with the expansion chassis then look at the following.
Hmm, just looked the AttoTech SCSI cards have been discontinued as well, as I said SCSI is ancient history in the Mac world.

How to display the selection screen with icons as well as with text element

How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

Report zex33.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
parameters: p_werks type marc-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
parameters: p_whouse(10).
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
parameters: p_auart like vbak-auart.
selection-screen end of line.
initialization.
write ICON_PLANT as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_WAREHOUSE as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_ORDER as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.

Select list with multiple columns

I want to create a select list with multiple column option. What are the options. Any developments in apex 3.0.1 ? Thanks in advance. I tried the tutorials by Kubicek.
I am kind of stuck to see the function entry inside LOV definition returns a error.

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

How can a calender be synced with multiple apple devices

how can a calender be synced with multiple apple devices so that all the users can be able to access the calender and also the entries done by one of them?

Hi Muneshdm,
Welcome to Apple Support Communities.
See these articles for information on setting up iCloud on multiple iOS devices, as well as how to share calendars:
iCloud: Set up iCloud on your devices
http://support.apple.com/kb/PH2609
iCloud: Share a calendar with others
http://support.apple.com/kb/ph2690
Best,
Jeremy

[Forum FAQ] How do I send multiple rows returned by Execute SQL Task as Email content in SQL Server Integration Services?

Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT   Category, CntRecords
FROM         [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
   // TODO: Add your code here
            Variables varCollection = null;
            string message = string.Empty;
            Dts.VariableDispenser.LockForWrite("User::Message");
            Dts.VariableDispenser.LockForWrite("User::Category");
            Dts.VariableDispenser.LockForWrite("User::CntRecords");
            Dts.VariableDispenser.GetVariables(ref varCollection);
            //Format the query result with tab delimiters
            message = string.Format("{0}\t{1}\n",
                                        varCollection["User::Category"].Value,
                                        varCollection["User::CntRecords"].Value
           varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
           Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
        ' Add your code here
        Dim varCollection As Variables = Nothing
        Dim message As String = String.Empty
        Dts.VariableDispenser.LockForWrite("User::Message")
        Dts.VariableDispenser.LockForWrite("User::Category")
        Dts.VariableDispenser.LockForWrite("User::CntRecords")
        Dts.VariableDispenser.GetVariables(varCollection)
        'Format the query result with tab delimiters
        message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
        varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
        Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

Web dynpro screen with multiple rows with columns that can be edited

Web dynpro screen with multiple rows with columns that can be edited individually:
Hi
I am busy creating a screen in web dynpro for ABAP which we would like to make available via Portal ESS (Portal 7).
I need to add 'n type of table (or almost something like Excel) or something in which someone can type a few paycode numbers (there should be lets say 10 blank rows in which info can be typed in and if I click on a button or so, more rows must be added if necessary. Then in the other colums stuff like amounts must be entered which one should also be able to edit then and there.
Can anyone assist in what I can use for this? There does not seem to be some existing element that I can use.
Help will be appreciated.
Regards
Debbie

Hi Debbie,
Whiel Creating table you need to be care full that use chose INPUT FIELD as the CELL EDITOR. Just guessing that if ur table is not editable u might have choosen TextView as default cell editor type.
check link for details on TABLE UI
[http://help.sap.com/saphelp_erp2005/helpdata/EN/b5/ac884118aa1709e10000000a155106/frameset.htm]
easy way is to first add UI ELEMENT TABLE to your VIEW, then right click over it & select create binding from context. After you have a pop up where you can select what columns you want what should be its cell editor etc.
Greetings
Prashant

How to run a select count(*) with multiple rows returned

Similar Messages

Maybe you are looking for