How to Run an applicatio​n on multiple machines on the network

Hello,
I am making an application seeking information from the serial number and signed licenseregistered in the labview.
But wanted to make this application to seek information on computers that are on the network without having to install the same application on each machine.
Can anyone help me? I'm not getting.
Thank you.

Could you be more descriptive about the scope of the application?
Have you tried/considered setting up the application as a "Remote Panel" on a machine, and then have the other machines that need access to the application connect via their web browser?

Similar Messages

  • How to read and writre file into remote machine in the network

    HI Experts,
       i want to write the data and read data into file in remote machine(not in application server and presentation server).is it possible in abap.
    thanks in advance
    With Regads
    Naidu

    Hi naidu,
    1. We can use this type of path
    computername
    folder
    file.ext
    2. We can use this in GUI_UPLOAD
       and it will run on presentation server,
       connect to
    computer
       and read the file contents.
    regards,
    amit m.

  • Run invoke-command on multiple machines at the same time

    Hey all so I read that if I store my New-pssession in a variable then used that in my invoke-command it would run all computers at the same time.
    $a = Get-Content "C:\Users\cody-horton\Desktop\list.txt"
    $session
    for($i=0;$i -lt $a.Length;$i++){
    if(!(Test-Connection -Cn $a[$i] -BufferSize 16 -Count 1 -ea 0 -quiet)){
    Write-Host $a[$i] -foregroundcolor red
    else{
    $session = New-PSSession $a[$i]
    Invoke-Command -Session $session -FilePath "\\My computer\C`$\Users\public\Documents\zip folder.ps1"
    What exactly am I doing wrong I just need to run this script on multiple machines at the same time.
    Thanks.
    Edit: Also what would be the best way to close all the sessions thanks.

    Hi there,
    So what I think you are doing wrong here is that you are overwriting the value in $Session everytime you executed code inside for loop. try the below:
    $a = Get-Content "C:\Users\cody-horton\Desktop\list.txt"
    $session = @() #define this as an array
    for($i=0;$i -lt $a.Length;$i++){
    if(!(Test-Connection -Cn $a[$i] -BufferSize 16 -Count 1 -ea 0 -quiet)){
    Write-Host $a[$i] -foregroundcolor red
    else{
    $session += New-PSSession $a[$i] #add the new session to the array, at the end it will be a collection of sessions
    Invoke-Command -Session $session -FilePath "\\My computer\C`$\Users\public\Documents\zip folder.ps1" #I think the above one won't work..first you need to copy the script locally on the machine and then execute it#Why this won't work because of Second-Hop Authentication
    Have put comments where I edited your code.
    Hope this helps
    Knowledge is Power{Shell}. http://dexterposh.blogspot.com/

  • How do I apply same adjustments to multiple photos at the same time?

    How do I apply same adjustments to multiple photos at the same time?

    You can't but you can copy the adjustments made on one photo and apply/paste it onto another by:
    1 - Control (right)-clicking one the edited photo in the Edit mode and selecting Copy Adjustsments
    2 - Control-clicking on the next photo and selecting Paste Adjustments.
    OT

  • NAV 2013 R2; How to run a customized report (206 sales invoice) in the classic client

    Hello, in preparing a newly installed NAV 2013 R2, I'm questioning the following:
    In the Development Environment I have customized report 206 Sales - Invoice in the Design menu View Layout with the space of the logo (by Microsoft SQL Server Report Builder) and
    finally saved and compiled.
    When I do run it connects to the server of what I call the classic client or the real NAV 2013 R2 and I can select a posted sales invoice to show the new layout and the result is
    fine as customized as I wanted.
    When I later ordinary print one of the posted sales invoices this customized logo layout doesn't appear on the print. I print in PDF and paper. When I make a next new sales invoice
    this new layout is not in use either.
    Another thing is run print started from the Development Environment is called Sales - Invoice in the header and not just Invoice that it the name when printing when invoicing and
    printing of posted documents.
    Additionally this form of Sales - Invoice shows our company details and good information as web, e-mail, bank account and bank name that is well demanded on a perfect invoice.
    How to get these informations out normally?
    Is the classic client having a wrong report as sales invoice?
    How to run a customized report (206 sales invoice) in the classic client NAV 2013 R2?
    It is like the customized report (206 sales invoice) is not in use yet in the classic client.
    All you wise people out there are welcomed to help me now
    Best regards
    Carsten

    Try on Dynamics Community forum: https://community.dynamics.com/nav/f/34.aspx

  • How do I send single notifications to multiple people in the workflow?

    HI
    As I see you can send notification to one person at a time.
    For example, the approval notification goes to a approver once someone submits a expense report or po approval.
    How do I send single notifications to multiple people in the workflow?
    Any idea?
    Thanks in advance.

    Hi,
    You need to send the notification to a role, which can comprise one or more than one users. If you check the "Expand roles" checkbox, then a different copy of the notification will be sent to each member of the role; otherwise one notification is sent which can be viewed by all holders of the role.
    You should always send a notification to a role rather than a user, anyway - roles do not go on holiday, get sick or leave the company; users do.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://thoughts.workflowfaq.com ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • How can I install one app on multiple iPads at the same time?

    We have a volume purchasing account, but when purchasing an app we get multiple serial numbers that all seem to need to be entered individually. The iPhone config Utility will not sync multiple iPads at the same time. Am I missing something? This cannot be the method for mass deployment, it seem too complicated.

    You can do a  backup of you iPad then restore the backup to many devices.
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    Mobile Device Management Solutions for iOS
    http://www.apple.com/iphone/business/integration/mdm/
    http://www.apple.com/ipad/business/resources/
    "iOS mobile device management (MDM)
    With an unmatched breadth of features, a Self Service console forover-the-air (OTA) distribution of in-house and app store apps, and integration with Apple's Volume Purchase Plan (VPP), the Casper Suiteallows administrators to easily achieve the four major tenets of iOSmobile device management: Inventory, Configuration, Security Management, and App Distribution."
    http://jamfsoftware.com/products/casper-suite/

  • How  to fade groups of images or multiple images at the same time?

    I am creating a flash infographic, and want to fade images I have imported from Illustrator that are grouped. I would like to know how  to fade these groups and multiple images at the same time.
    Thanks!

    Use TweenMax for this.
    the syntax is like this:
    var arrayOfDisplayObjects:Array = new Array();
    //with arrayOfDisplayObjects.push(DisplayObject)
    //you can put any DisplayObject in the Array and when you want to fade them call this
    TweenMax.allTo(arrayOfDisplayObjects,1, { autoAlpha:0} );
    //to fade them in 1 second to alpha=0 and when reaching the zero make them invisible (to save processing power)

  • How to run itunes off an external hard drive using the new itunes

    I have windows 8.  I installed the new itunes and I want to know how to run itunes off an external hard drive. 
    thank you for your help.

    Same way as before, hold down shift as you start iTunes, Choose or Create a library.
    tt2

  • How can i select some row from multiple row in the same group of data

    I want to select some row from multiple row in the same group of data.
    ColumnA        
    Column B
    1                  OK
    1                   NG
    2                   NG
    2                          NG
    3                          OK
    3                          OK
    I want the row of group of
    ColumnA if  ColumnB contain even 'NG'
    row , select only one row which  Column B = 'NG'
    the result i want = 
    ColumnA         Column B
    1                         NG
    2                   NG
    3                          OK
    Thank you

    That's some awful explanation, but I think this is what you were driving at:
    DECLARE @forumTable TABLE (a INT, b CHAR(2))
    INSERT INTO @forumTable (a, b)
    VALUES
    (1, 'OK'),(1, 'NG'),
    (2, 'NG'),(2, 'NG'),
    (3, 'OK'),(3, 'OK')
    SELECT f.a, MIN(COALESCE(f2.b,f.b)) AS b
    FROM @forumTable f
    LEFT OUTER JOIN @forumTable f2
    ON f.a = f2.a
    AND f.b <> f2.b
    GROUP BY f.a

  • How do you insert new records into multiple tables using the same unique primary key?

    I’ve created a PHP site and MySQL server using a free app called XAMPP.  I have successfully created a form in Dreamweaver that will write data to a (name) table in the SQL database.  Here’s my question: How do you write to two (or more) tables in the same database and pass the same primary key to both tables?  In the SQL database, I defined the first field as ID and set it as the primary key with auto update.  So, when you insert a new record, it creates a unique primary key for that record.  In my form, I’m capturing info that needs to be stored to two tables at the same time; a Name table and Address table. Since the Name and Address tables use the ID field as the primary key, I believe I will need to pass the ID value from the Name table to the insert of the Address table to insure they both have the same primary key, right?

    No. You probably need the primary key from one table to be a foreign key in the other tables. In any case, I believe you can use two methods to obtain the auto generated key. First with SQL:
    http://dev.mysql.com/doc/refman/5.0/en/getting-unique-id.html
    And the other using a PHP function:
    http://us3.php.net/mysql_insert_id

  • Running HTML DB apps on one machine with the database on another

    I first want to apologize for this question being asked AGAIN.
    I have spent the better part of the day reading through a lot posts regarding this issue (and there are a lot). My boss sent me this requirement on a new project that Oracle Forms and Reports run on one server and connect back to the database on another server for security. HTML DB needs to do the same thing.
    The question:
    I have found out that the DAD file needs to be modified to allow this type of set up to work and the HTTP server needs to be running on that server. He is asking what in the DAD file needs to be changed to allow this to work. Would someone provide me with an example of what would need to be changed?
    Also, I'm confused on the implementation of this. Currently all the applications I've created are for "in-house" users. This project is the first (that I've done) that is going to be open to users outside the company. I'm confused on the link that will be supplied to the users. After I import my application into the production database, I run it to get the link and send that to our users. If the application is going to be run from a different server from the database, how is/will the link to run the application be built? I hope I'm describing this well.
    Thanks,
    Joe

    Joe,
    You wouldn't have the database server "open to the outside world". All you'd need to have open would be the port for HTTP traffic.
    There are two scenarios -
    1) Having them both (DB & Apache) on the same machine
    You would still only have the HTTP port open. The "fear" is that if the Apache server is compromised then they have access to the database machine.
    2) Having them on separate machines.
    In this case if the Apache server is compromised then, since by definition, you have a route from the Apache server to the DB server then they can still reach the DB machine from the Apache server machine.
    The thing to do here is to ensure your Apache server is patched and secure, regardless of whether it's running on the same machine as the DB or not.
    I'd be interested to see what others think.

  • Multiple Gateway on the Network

    Dear All,
    I have a situation here.
    The network has two internet connection
    A - Cable Modem (ADSL) - IP - 192.168.1.250 - used by server alone
    B - Fibre Optical Connection - IP - 192.168.1.1 - used by all clients
    Sever IP - 192.168.1.253 (used by the server for communicating over the internet & accepting VPN request from the Internet; Gateway - 192.168.1.250) & 192.168.1.254 (used for LAN)
    Server is configured for following 
    1. DHCP
    2. DNS
    3. Active Directory
    4. RRAS - VPN and Routing (RIP)
    5. Web & E-Mail Server
    6. Storage & File Server
    All the clients on the LAN will obtain their IP address from the server using the DHCP. The Gateway mentioned in the DHCP Config shall be 192.168.1.254. We have defined a static route defined in the RRAS and enabled RIP, that all communication on that interface
    shall be through the Gateway 192.168.1.1 by way of static route. However, when i run a tracert from the clients, it is shown that the client is using the Gateway 192.168.1.250 instead of 192.168.1.1.
    I know you may suggest that I can configure the DHCP to provide the default gateway as 192.168.1.1. But the problem is that this connection is sometimes un-reliable and are proven to disconnections. So when there is a connectivity issue, we are not able
    to force the client to change the gateway. Hence, we have opted for RIP which is more convenient and can accomplish the same without any client action.
    Please advise me if I am missing something or I have understood something wrongly. Please advise how I can achieve the above.
    Thanks and regards,
    Sri

    Hi,
    According to your description, my understanding is that you want to configure the clients use gateway 192.168.1.1.
    I want to confirm with you that:
    VPN server with 2 NICs, one(192.168.1.253) connects to Internet, the other one(192.168.1.254) connects to internal LAN. This server also configured as DC/DNS/DHCP/etc. server.
    It seems that main server(DC/DNS/etc.) is connecting to Internet directly, it is not recommended for security reason. And mutihomed DC is not recommended configuration due to some known issues. It is better to acquire a separate server to be used as DC/DNS/DHCP
    for the network.
    This is a blog describes about Multihomed DCs with DNS, RRAS, and/or PPPoE adapters, for you reference：
    http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
    Besides, are the internal LAN client or VPN client which you want to configure gateway as 192.168.1.1?
    For a client, traffic which need to be sent will do route selection first based on its own(client’s) routing table. You may open CMD and type
    route print to list the route table. If traffic is sent to the VPN server(enabled RIP, so it is also a RIP router), then, the VPN server will do route selection according to its routing table(use
    route print to list the routing table of the VPN server).
    Tracert is a route tracing utility that display a list of near-side router interfaces of the routers along the path between a source host and a destination.  You may just use
    ipconfig /all to confirm the gateway of the client.
    Best Regards,
    Eve Wang 
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Managing sole iTunes library with multiple machines on-the-go with database&media on external drive?

    Hi fellows. Trying to organize & revamp my iTunes library & wish to achieve a configuration but lack the expertise to achieve it. My objectives are:
    Objectives
    +1. for my multimedia content to be stored/accessed from an external hard disk+
    +2. to keep the entire iTunes multimedia & all necessary operating files as self-contained as possible,+
    +3. Allow multiple machines to manage import of new content into library, i.e. download new episodes of podcasts, rip new music & movies into the library, sync-ing of iPod even when said machine is nowhere near my external hard disk (this is the tricky one)+
    _Justification for my objectives_
    For objective #3, it's not that I'm trying to be funny. My use case is I've 1 laptop (main machine & always at home) & 1 netbook (brought to school daily). Most of my iTunes usage will be via the stay-at-home laptop; but I may wish to add/manage new content onto my iTunes library/iPod while I'm outside (hence, decoupled from my external hard disk at home).
    I'm not trying to be funny for objective #1 either. I wish to have a streamlined process of retaining & re-instating my iTunes library meta-data across system re-format, i.e. where the iTunes library db files' location may be changed (most obvious being the new "My Music" folder path in Win7 from WinXP)
    _What I'm well aware of_
    I understand that storing/re-locating multimedia on external hard disk is no-kick to iTunes veteran. I also understand that after a new installation of iTunes, I can move the fresh copy of "iTunes_library.itl" & "iTunes_library.xml" files to my external volume & point iTunes to their new address from the 2nd launch onwards. I also understand any new machines I introduce into my environment can be directed to that exact copy of iTunes library database files when I install iTunes & pressing "Shift" key upon their launch. Lastly, I also understand that I will have no access to my multimedia files (for playback) while I'm outside, but I can still add new content, & download new podcasts & remove old content from my library/iPod
    _The question_
    However, what I have difficulty achieving, is launching iTunes on my on-the-go machine(s), without a local copy of the iTunes library database files. I doubt iTunes will be able to launch at all, & if I create a new library (just to launch iTunes), it will not possess content from my main media collection & likely to wipe out my iPod.
    _My novice attempt & its inadequacies_
    My 1st instinct, is to have the iTunes library database files stored in the cloud. More specifically, I can store them files in my DropBox folder/account, & have every machine update to a single latest version of iTunes library database files upon Internet connection. However, this method depends on:
    +* the DropBox application to exist forever,+
    +* assumed the installation path of DropBox (or any applications for that matter) to persist/remain unchanged across future versions of operating systems,+
    +* Will corrupt any un-sync-ed version of my iTunes library database files when I launched iTunes without 1st updating the local cached copy of them database files (suppose I manage my iPod playlists via iTunes on a plane)+
    _Open for recommendations_
    So here I'm, all ears to any fine recommendations you iTunes veterans have to offer. Thanx in advance.

    In case anyone is interested in these sorta thing:
    UPDATE #4: Unfortunately, if you discover you tagged something wrong after importing the songs, even when you correct the tags, iTunes will not re-organize the folder hierarchy, as long as “Keep iTunes Music folder organized“ is UNchecked, even if the songs were imported via the “Automatically add to iTunes folder” channel.
    Example: I imported a folder of Andy Lau songs into my library, unbeknownst to me, some of the songs had their “Artist” tagged as “Andy Lau“, while some had theirs tagged as “Liu De Hua“. Naturally, the 1st time round I imported them, 2 separate folders were instantiated as to iTunes, those were names of 2 distinct artists (this is expected, & acceptable behaviour). The downside is, even if I re-tagged all those songs with “Andy Lau” as the artist, iTunes will no longer re-organize & consolidate all them songs into a single “Andy Lau” artist folder (because I’d “Keep iTunes Music folder organized” UNchecked remember?)
    Well, you may suggest that I check that option when managing my future library & uncheck it right before launching/using my main, current library. The thing is, iTunes preferences persist across libraries, & one day I will forget to uncheck that option, launch my main library & lose all my current music folder structure to iTunes’ re-organization (which I don;t want, as of yet). Which brings me to another update:
    UPDATE #5: My future iTunes library has “I:/iTunes_Media” as iTunes’s “Home” folder. This setting persists even when I switch back to my main, current library. Which means, if I’d my external volume connected while launching/using my main, current library, all new content will end up in that folder on the external volume! Which messes up the whole scheme of things! Arghz!
    UPDATE #6: Here’re some updates with regards to ID3 tags:
    * the “Album Artist” in Windows (7) Explorer = the “Album Artist” field in iTunes 9
    * Modifying a ID3 tag field using Windows (7) Explorer will update BOTH the v1 & v2.3 version of the ID3 tags on the song (if the song has both versions of tags embedded & if the field exists in both tag versions). If you update the tags via iTunes, only the v2.3 tags get updated. This is surprising.
    * the “Contributing Artist” field in Windows (7) Explorer = the “Artist” field in iTunes 9 & the “Artist” field in ID3v1 tags (changes in tany of the 3 fields will affect the other 2 respectively)
    o However, iTunes Media folder organization will only adhere to the value saved in the “Album Artist” field [if you change the value of "Contributing Artist" in Windows (7) Explorer, the "Artist" field in iTunes or the "Artist" field in a song's ID3v1 tags, no folder re-organization will occur]
    UPDATE #7: Some updates with regards to workflow:
    Decided to retain all non-music content within a sub-folder named “non-music” beneath the main album folder (& take strict precautions to import songs only). The exception is “m3u” playlist files. Have read elsewhere if you import a folder of songs & there’s an “m3u” playlist inside, your library may have duplicates and/or the tags of those songs you just imported could be screwed, etc.

  • How can one share iTunes Library across two machines at the same time?

    **I have setup 1 of 2 machines to host all the songs in my iTunes library. I then went to machine 2 of 2 and held down option key on start up of iTUnes, changed the location of the liobrary on machine 2 to a shared folder on machine 1.**
    **This works awesome and I can use itunes on each of the machines 1 and 2 with no duplicate library in my home.**
    **Problem: I can only run one machine at a time. I can not run itunes on both machines at the same time. The error message from machine 2 is ITUNES library is locked and cant write to the folder. iTunes works correct if I QUIT iTunes on machine 1.**
    **Can iTunes run at the same time on 2 machines and access the same library?**
    *Thank You Troy*

    Troy Yoho wrote:
    Can iTunes run at the same time on 2 machines and access the same library?
    in a way, yes.
    set up _*Home Sharing*_ on both machines.
    JGG

Maybe you are looking for