How to run DB13 in a Distributed System with Linux+Oracle

Hello all,
We have a ERP system which runs on Distrbuted environment(APP server and DB runs on different hosts), OS and DB is RHEL 6.5 and Oracle 11.2.0.3, ECC6.0 EHP7 runs on Netweaver 7.4
now we would like to backup the database, to run brtools via command line is no problem, but if I run it with Db13, error will occur.
============================================
No application server found on database host - rsh/gateway will be used
Execute logical command BRBACKUP On host sapsrvcepdblan
Parameters:-jid ALLOG20140620190905 -u / -c force -t online -m all -p initCEP.sap -a -c force -p initCEP.sap -s
d
SAPXPG_START_XPG_LONG: sy-subrc: 01005
destination = SAPXPG_DBDEST_SAPSRVCEPDBLAN
number of retries =  1
SAPXPG_START_XPG_LONG: sy-subrc: 01005
destination = SAPXPG_DBDEST_SAPSRVCEPDBLAN
number of retries =  2
SAPXPG_START_XPG_LONG: sy-subrc: 01005
destination = SAPXPG_DBDEST_SAPSRVCEPDBLAN
number of retries =  3
SXPG_STEP_XPG_START: execute_sapxpg: rc = 1.003
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
SXPG_COMMAND_EXECUTE(LONG)
<timestamp> = 20140620190906
COMMANDNAME = BRBACKUP
SXPG_COMMAND_EXECUTE failed for BRBACKUP - Reason: program_start_error: For More Information, See SYS
Job cancelled after system exception ERROR_MESSAGE
============================================
I searched for many many notes and SCN messages but none of them solve my issue, I have installed a standalone Gateway sevrer on database instance, and modified SM59 RFC SAPXPG_DBDEST_SAPSRVCEPDB, but the connection test for this RFC always failed.
Could you kindly share your experiences how to solve this problem? Thanks a lot!
Best regards,
Fresh

Hi Fresh,
In a distributed environment you need to install SAP gateway instance on the DB host.
Then in the RFC destination SAPXPG_DBDEST_SAPSRVCEPDBLAN maintain the gateway host and gateway service.
Post this db13 should work fine.
Hope this helps.
Regards,
Deepak Kori

Similar Messages

  • How to use DB13 on a distribute system

    HI,
       We install SAP R3 enterprise 4.7 SR1 as distribute system on 3 different windows 2003 server, Central Instance , Database Instance and Dialog Instance. As I understood, we need to use sm59 to setup the RFC destination so that DB13 can work well.
      So I manually create a RFC destination SAPXPG_DBDEST_DB01 and only test successfully after I install a new dialog instance on database server and connect to this dialog instance. I tried to create SAPOSCOL_DB01 with the folow parame
    Connect Type : T
    Activition Type: Explicit
    Program: saposcol
    target: db01  ( db01 could be resolved to IP address and ping well)
    but the test is unsucessful.
    when I run db13 to backup, it looks the brbackup run on the central instance not on the database instance.
    Any one can help to handle this problem or give me some notes about a distribute system RFC setting?
    Your kindly help will be appreciated!
    Regards

    there is not any relation of saposcol program to database backup. as per my understanding, this program is used to collect the data, for database backup from DB13 program sapxpg should be called, so check the SM59 that the connection of this program is working properly or not.
    Sap Note : 446172
    Regards
    Subhash
    Edited by: Subhash Chandra on Dec 11, 2008 2:56 PM

  • Let me know how to run high availability services in system 9 essbase.

    Hi
    Let me know how to run high availability services in system 9 essbase.
    thanks in ADV
    Message was edited by:
    user624564
    Message was edited by:
    user624564

    Hi,
    Now i am using essbase system 9.2 version,
    & URL : http://localhost:11080/eds/EssbaseEnterprise
    plz guide me to download the High Availability servers .
    thanks in Adv....

  • Can flash player app be run and controlled in a system with only command line?

    I want to test my.  flash app in a remote linux pc. I am not permitted to install  desktop environment in that remote pc.
    So I am wondering if I can use flashplayer_10_sa_debug to run my app in a system with only command line access.
    And further, can I use some command option to interact with my app for doing something?
    If not , how can I reach my goal? Can you give me some advices?

    Hi,
    Can we get a status update for this? This seems to have broken Mac Projector files when published from a PC. Our old CD-ROM presentations no longer work. They throw the same error.
    Is there a bug ticket that we can follow? Any sort of timeline? I need to give an answer to my client on when this will be fixed. Telling them to disable Gatekeeper isn't really a great solution.

  • How to run Java program as Daemon Server in linux

    How to run Java program as Daemon Server in linux
    i would like to run the java program on system start up in a redhat linux system
    can any one provide rc.status file

    http://wrapper.tanukisoftware.org/

  • How to run java signed applet in vista with changing IE security options

    how to run java signed applet in vista with changing IE security options. If i change the IE security settings to low. it works.
    without changing the security setting, how to run.

    j_nanaji9 wrote:
    how to run java signed applet in vista with changing IE security options. If i change the IE security settings to low. it works.
    without changing the security setting, how to run.Can't be done without changing the security setting.

  • How to read some images from file system with webdynpro for abap?

    Hi,experts,
    I want to finish webdynpro for abap program to read some photos from file system. I may make MIMES in the webdynpro component and create photos in the MIMES, but my boss doesn't agree with me using this way. He wish me read these photos from file system.
    How to read some images from file system with webdynpro for abap?
    Thanks a lot!

    Hello Tao,
    The parameter
       icm/HTTP/file_access_<xx>
    may help you to access the pictures without any db-access.
    The following two links may help you to understand the other possibilities as well.
    The threads are covering BSP, but it should be useful for WebDynpro as well.
    /people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents
    http://help.sap.com/saphelp_sm40/helpdata/de/c4/87153a1a5b4c2de10000000a114084/content.htm
    Best regards
    Christian

  • How many people can be on the system with a 512 K connection in BPC 7 MS

    Hi,
    It appears that BPC uses a large piece of the band width and more than one computer and user with a 512 K connection using BPC will not work.How many people can be on the system with a 512 K connection? -BPC 7 ms version.
    Thx
    PLN

    I would like to precise more things regarding the network.
    I did a case study for one customer and really to have good performances with SAP BPC client the network required the follow:
    Bandwitdth 1024kb/s
    Latency smaller than 200 ms between BPC client and BPC server
    Otherwise the users will experience problems:
    1. IBandwitdh < 1024Kb/s then to download 80 MB or more (templates + dimensions) will require a lot of time and that's means the login time will be very slow every time when a dimension is changed or security is process
    2. When an report is executed (a medium report not very complex report) around 100 mesage are send between bpc client and server. So if latency > 200 ms than a simple calculation is saying just into network it will be lost 200 * 100 ms = 20 s.
    So for a report which normally is taking 5 - 10 second it will take 30s or even more into client with latency bigger than 200 ms.
    Regards
    Sorin Radulescu

  • How to run a pure java application client with ear deployed on 9ias

    Hello all,
    We want to run a pure java application client which is packed with target bean in the same ear file. In the application-client.xml we refer to some EJBs.
    We deployed the ear file which contains ejb jar module and application client module to oracle 9ias 904 through enterprise manager on unix. The jndi.properties we used looks like this
    java.naming.factory.initial=com.evermind.server.rmi.ApplciationClientInitialContextFactory
    java.naming.provider.url=opmn:ormi://opmn_host:opmn_port:oc4j_instance_name/application_name
    java.naming.security.principal=test
    java.naming.security.credentials=test
    Is there anybody knows how to run such an application client? Do we need to provide such a jndi.properties or not at all?
    Thanks,
    9ias user

    Refer OpenEJB User - Oracle ADF Essential and TomEE+
    Also refer Bug in tomee 1.5.2. Fixed in 1.6.
    https://issues.apache.org/jira/browse/TOMEE-756

  • How to run RWRUN.exe and RWCLIENT.exe in Linux

    Our reports (11G R2) output desformat is PDF. We howerver, need to embed some fonts in the PDF when it is generated. So, we need to add the parameter PDFEMBED in the command line of RWRUN, RWCLIENT or RWSERVLET. However, the application server is Linux.
    Since Linux does not have EXEs how to run these in Linux and how to pass parameters to them? i.e. reportname, directory,... etc.

    Hello,
    You can find the shell scripts rwrun.sh and rwclient.sh in ORACLE_INSTANCE/config/reports/bin ...
    Regards

  • How to run the program in back ground with out selection screen ?

    Hi,
    I want to run the program in back ground but don't have selection screen. How to run this program in back ground
    as program has no selection screen.
    Waiting for quick response.
    Best Regards,
    Padhy
    Moderator message: basic, please search for available information/documentation.
    Edited by: Thomas Zloch on Feb 21, 2011 12:43 PM

    Hi,
    Go to transaction SE38 --> Execute --> Background.
    If your program contains selection screen, you have to pass your input values as variants.

  • How to connect X-Fi to surround system with tulip audio

    I have Sound Blaster X-Fi and 5. surround stereo system with surround tulip in (this system separates audio channels itself). SB X-Fi have 3 mini-jack outs so it also separates audio channels. How I can connect my X-Fi to this system with one mini-jack->tulip cable, so it plays all 5. channels (now it plays only front channel)? I think that there is some option to send all audio-signal to one mini-jack out of my sound blaster (so stereo systems separtes it itself after), but I can't find it. Any ideas?

    It think the Tulip you talking about is a standert RCA Female jack.
    This is a likely a Digital Jack so what you need to do is hook it up to your digital out on your X-Fi. you can go to RadioShack and find a converter to change the Headphone jack into a RCA jack..Message Edited by Tannah on 07-23-2006 03:58 AM

  • How can I replace the old commenting system with Disqus?

    How can I replace the old commenting system on Business Catalyst with Disqus? Please help

    Hi,
    The Disqus integration has been done by at least one BC partner – simpleflame.com, on this site: http://kiyuco.com/free-videos . You could reach out to them inquiring for more details on how it has been done.
    Kind regards,
    -Sidney

  • How to use different wallpapers on multiple monitors with Linux

    Umm...ok. I use XFCE4 as my DM. It allows me to have a different wallpaper on each desktop.
    Though I'm not interested in other DMs, what DMs would require that I use this third party tool?

    If you have multiple monitors and run Linux, you may want to display different images as your wallpaper on each monitor. There's a utility for that – Nitrogen. The blackMORE Ops blog has a nice how-to on getting Nitrogen and configuring it, with step-by-step instructions and plenty of screenshots.
    This topic first appeared in the Spiceworks Community

  • MacMini 2010 4,1 how to run Apple Hardware Test from  /System/Library/CoreServices/.diagnostics folder

    I have a 2010 Mac Mini4,1 with SnowLeapard and plan to upgrade to Mavericks, but can't run Apple Hardware Test from my applications disk 2 that came with the machine.  For some reason the Mac can read it and kicks it our after about a minute.  Seems to be able to reado other disks, so this one may be corrupted. I found info on this community that says that the AHT is on the hard disk and I found it here /System/Library/CoreServices/.diagnostics using terminal.  When open that folder using terminal it open a window with that folders contents.  My problem is I can execute the only unix executable in that  folder.  It responds with "No application knows how to open /System/Library/CoreServices/.diagnostics/diags.efi"
    Can someone help me out here or if there is downloadable somewhere on line that I can get?

    My 2010 4,1 Mac Mini still has the HW Test on the Internal HD after updating it to Lion, Mountain Lion and Mavericks.
    see > Using Apple Hardware Test
    Additionally if your using a wireless keyboard and it is not invoking the Hardware Test using the D key immediately after the chine, then you may need to use a USB keyboard. Adding that any Apple, PC or generic Logitech USB keyboard should work for invoking the startup commands. 

Maybe you are looking for