How to save recordset by code

Hi
i want to save my recordset by php code in any format sql or
xml
can this done by iterating through the recordset and add
every one or what ?
thanks in advance.

Hi Adele,
Thanks ,I have got the email.
and my version is 'SAP Business One 2004.2 B (7.30.224) SP: 00 PL: 30'
this is my code that have writed before.
Public Sub AddUDO()
    Dim oUserObjectMD As SAPbobsCOM.UserObjectsMD
    Set oUserObjectMD = SBO_Company_DI.GetBusinessObject(oUserObjectsMD)
    oUserObjectMD.CanCancel = SAPbobsCOM.BoYesNoEnum.tYES
    oUserObjectMD.CanClose = SAPbobsCOM.BoYesNoEnum.tYES
    oUserObjectMD.CanCreateDefaultForm = SAPbobsCOM.BoYesNoEnum.tYES
    oUserObjectMD.CanDelete = SAPbobsCOM.BoYesNoEnum.tYES
    oUserObjectMD.CanFind = SAPbobsCOM.BoYesNoEnum.tYES
    oUserObjectMD.CanLog = tNO
    oUserObjectMD.CanYearTransfer = tYES
    oUserObjectMD.ManageSeries = tYES
    oUserObjectMD.ChildTables.TableName = "APS1"
    oUserObjectMD.Code = "OAPS"
    oUserObjectMD.ManageSeries = tYES
    oUserObjectMD.Name = "OAPS"
    oUserObjectMD.ObjectType = SAPbobsCOM.BoUDOObjType.boud_Document
    oUserObjectMD.TableName = "OAPS"
    oUserObjectMD.FormColumns.FormColumnAlias = "Code"
    oUserObjectMD.FormColumns.FormColumnDescription = "Code"
    '子UDO
    lRetCode = oUserObjectMD.Add()
        '// check for errors in the process
    If lRetCode <> 0 Then
            SBO_Company_DI.GetLastError lRetCode, sErrMsg
            SBO_Application.StatusBar.SetText sErrMsg, bmt_Short, smt_Error
    Else
            SBO_Application.StatusBar.SetText "success", bmt_Short, smt_Success
    End If
    Set oUserObjectMD = Nothing
End Sub
and the error message is 'N' ,It's very stange.
but why I can't find it in Tools -> User-defined-object -> default form ?
anyway ,thanks a lot !
Message was edited by: wei wang

Similar Messages

How to save the source code

I just want to know what is the correct way of saving my composites in application. Here in my company, there is no version control system, all i have is the code in my PC. So i want the code to save somewhere in such a way that later even other developer can take that code and open the composites in his JDeveloper on his machine and perform the changes if required. I know that the application, if i go to the properties i can go to the source location and i can copy the application folder and keep it somewhere. Any other developer can open that application and can view the composites. Is it the correct way or any other way is there ?
Please let me know...Thanks,Nani

see something like this :
http://www.tonyspencer.com/2007/03/02/setup-a-subversion-server-in-4-minutes/
idea is you commit your changes to this remote repository
your fellow developer checks these changes out of the repository, continues development and also commits these changes.
you can even install the subversion server on your own machine and let the other developers connect to it, but it's a better idea to use some other machine for this.
so it's really not hard to install subversion, you will love it when a all are using it :)

How to triger SAP workflow after save in t-code RMWB

Dear friends,
After execute t-code RMWB, I could click save button to save it. but my requirement is to triger the SAP workflow to send an email.
My question is, how to triger this SAP workflow after clicking save in t-code RMWB?
Thanks a lot!

Use this function module in a Exit or BADI or Enhancement spot during SAVE
SAP_WAPI_START_WORKFLOW
I THINK IT CAN BE DONE BY CREATING A SPOT IN "CALL METHOD GO_APPL->MO_RMWB->SAVE" IN PROGRAM OF RMWB

How do i save the source code of a javascript alert in safari?

I am trying to save the source code of the javascript alert in safari but the menu items blank out.
Is this even possible?
dave

Eventhought it is a usefull function which i did not know about it is not helping me. This is what hapens.
I request an url and get a javascript alert back from the server. The javascript alert triggers that is i get a popup where I can only press ok. If i do not press ok i can not do anything else. the safari menu's are greyed out. if i do press ok i get redirected and i can not read the javascript page with your suggestion.
what i want is read the source for that javascript alert so i know what it says (my filemaker database that is) but because that option is greyed out i am stuck.
here is the link i use to get the javascript popup:
https://www.login.alex.nl/klanten/portfolio/portefeuille-xls.asp?print=true
the javascript says i am not loged in.
if i get this javascript alert in firefox i can ask for the sourcecode, read it and do stuff that is log in. I just do not understand how i can change safari so it does the same thing as firefox.
thanks again

ALV Grid: how to save changes made in an editable Grid

Hi,
How to save changes made bu the user in any of the editable cells in a ALV Grid?
Regards,
deb.

Hi,
If you are using the FM look at the following example code...
data: LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.<<<<<------
gt_layout-zebra = 'X'.
gt_layout-detail_popup = 'X'.
gt_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = i_repid
i_callback_user_command = 'USER_COMMAND1'
it_fieldcat = header
is_layout = gt_layout
i_callback_top_of_page = 'TOP-OF-PAGE1'
i_grid_title = text-h17
it_sort = gt_sort[]
i_default = 'X'
i_save = 'U'
is_variant = gt_variant
it_events = gt_events
I_GRID_SETTINGS = LC_GLAY<<<<<<------
TABLES
t_outtab = itab.
clear itab.
Form USER_COMMAND1
FORM USER_COMMAND1 USING u_ucomm LIKE sy-ucomm
us_selfield TYPE slis_selfield."#EC CALLED
case u_ucomm.
when '&DATA_SAVE'.<<<<<<<<----
This will come after the data was EDITTED and when SAVE was clicked by user in output scren.
Here now in the final internal table(ITAB) you can find the data changed in EDIT mode.
After this you can do manipulation what ever you want.
Thanks.
If this helps you reward with points.

How do I generate redemption code for creative cloud?

how do I generate redemption code for creative cloud?

On October 27th 2014, you have purchased two CC (one complete &one photography) under the same Adobe ID. That is the reason you are being asked for a code because under one Adobe ID only one CC can be activated(twice).
Please contact Adobe Support or you can inbox me privately the CC order number that you would like to cancel.
You can also check if the host file has Adobe entry or not as if Adobe entries are there then also CC can ask for serial number. You can check the host by the followinh method.
Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
So you need to login with your Adobe ID and password to activate the cloud membership.
Log out & log back in of the CC Desktop App.
In case it is not signing in successfully please try the following:
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
   Windows:
   In windows 7 navigate to following location:
     /windows/system32/drivers/etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
Mac:
   1. Please click on "Go" and navigate to /private/etc
   2. Open "hosts" file and check out for any entries for Adobe.com
   3. Remove the entries and save the file
   4. try again launching any product from CC
Please refer to Creative Cloud applications ask for serial number
Hope it helps you.
Regards
Rajshree
Cannot license Illustrator CC after buying subscription

How to save report in PersonalCategory after creating it using java panel?

Hi,
Anybody knows How to save report in PersonalCategory after creating it using java panel?
I dont want to save it in public folder. I want to save report (webi) in user's personal category.
can anybody send me source code?
It will help me a lot.
Thanks in advance
Amol Mali

Hi teda,
i'm assuming that you have seen my post that i did successfuly save report in user's personal category.
Actually the report is created in webi java panel using RE SDK and is saved in Report Sample Folder then i'm saving it in user's personal category by following code
string query = "Select SI_PERSONAL_CATEGORIES From CI_INFOOBJECTS Where "
                     + "SI_INSTANCE=0 And SI_ID=" + reportID;
                InfoObjects infoObjects = infoStore.Query(query);
                InfoObject infoObject = infoObjects[1];
                Webi wreport = (Webi)infoObject;
                ObjectRelativeIDs personalIDs = wreport.PersonalCategories;
            /personalIDs.Add(Convert.ToInt32(categoryID));
               infoStore.Commit(infoObjects);
But the report is presents in the Folder also and in user's personal category also.
I dont want the report to be in the folder (Report Sample) if i saved it in user's personal category.
How can i do that?
any idea.
Please help me.
Thanks in advance
Amol Mali
Edited by: amol mali on Jan 9, 2009 7:55 PM

How to Save Pdf file in a particular format

Hi Experts,
Can anybody tell me how to save a pdf file in a particular format,My requirement is i have a print button in webdynpro ,when ever user clicks on print ,adobe form is opened ,if user clicks on save .Form is saving with adobe form name .My requirement is it should be saved as ID NO.Date.Pdf form lets Id is 0456 ,form should be saved as 0456.040614.pdf format, Thanks in Advance
Regards
Sandesh

Hi Sandesh,
Please provide the complete code from print & save button.
Thanks & Regards,
Balamurugan G

How to save pdf file in database

Dear All,
my application is forms 6i and database is 8i,requirement is that how to save pdf file in database and users can view through forms

I'll apologize up front for the length of this post. I have a few database procedures I created that write a file to a BLOB column in a table as well as retrieve the BLOB from the column after it stored there. I have successfully stored many different types of binary file to the database using these procedures - including PDF files. I have not used these procedures in a Form so I can confirm that they will work, but theoretically they should work. I'm including the code for each procedure in this posting - hence the apology for the long post! :-)
Also, since these procedures reside on the database you will need to use Forms TEXT_IO built-in package to write your file to the server before you can use these procedures to store and retrieve the file from the database.
These procedures reads and writes a binary file to a table called "LOB_TABLE." You will need to modify the procedure to write to your table.
-- Author : Craig J. Butts (CJB)
-- Name   : load_file_to_blob.sql
--        : This procedure uses an Oracle Directory called "IN_FILE_LOC". If you
--           already have a directory defined in the database or would prefer to use
--           a different Directory name, make sure you modify line 21 to reflect the
--           new Directory name.
-- ==================================================================================
-- History
-- DATE        WHO         DESCRIPTION
-- 12/11/07    CJB         Created.
CREATE OR REPLACE PROCEDURE load_file_to_blob (p_filename IN VARCHAR2) IS
   out_blob    BLOB;
   in_file     BFILE;
   blob_length INTEGER;
   vErrMsg     VARCHAR2(2000);
BEGIN
   -- set the in_file
   in_file := BFILENAME('IN_FILE_LOC',p_filename);
   -- Get the size of the file
   dbms_lob.fileopen(in_file, dbms_lob.file_readonly);
   blob_length := dbms_lob.getlength(in_file);
   dbms_lob.fileclose(in_file);
   -- Insert a new Record into the tabel containing the
   -- filename specified in P_FILENAME and a LOB_LOCATOR.
   -- Return the LOB_LOCATOR and assign it to out_blob.
   INSERT INTO lob_table (filename, blobdata)
      VALUES (p_filename, EMPTY_BLOB())
      RETURNING blobdata INTO out_blob;
   -- Load the file into the database as a blob.
   dbms_lob.open(in_file, dbms_lob.lob_readonly);
   dbms_lob.open(out_blob, dbms_lob.lob_readwrite);
   dbms_lob.loadfromfile(out_blob, in_file, blob_length);
   -- Close handles to blob and file
   dbms_lob.close(out_blob);
   dbms_lob.close(in_file);
   commit;
   -- Confirm insert by querying the database
   -- for Lob Length information and output results
   blob_length := 0;
   BEGIN
      SELECT dbms_lob.getlength(blobdata) into blob_length
        FROM lob_table
       WHERE filename = p_filename;
   EXCEPTION WHEN OTHERS THEN
      vErrMsg := 'No data Found';
   END;
   vErrMsg := 'Successfully inserted BLOB '''||p_filename||''' of size '||blob_length||' bytes.';
   dbms_output.put_line(vErrMsg);
END;
-- Author   : Craig J. Butts (CJB)
-- Name     : write_blob_to_file.sql
-- Descrip : This procedure takes a BLOB object from a database table and writes it
--             to the file system
-- ==================================================================================
-- History
-- DATE        WHO         DESCRIPTION
-- 12/11/07    CJB         Created.
CREATE OR REPLACE PROCEDURE write_blob_to_file ( p_filename IN VARCHAR2 ) IS
   v_blob      BLOB;
   blob_length INTEGER;
   out_file    UTL_FILE.FILE_TYPE;
   v_buffer    RAW(32767);
   chunk_size BINARY_INTEGER := 32767;
   blob_position INTEGER := 1;
   vErrMsg     VARCHAR2(2000);
BEGIN
   -- Retrieve the BLOB for reading
   BEGIN
      SELECT blobdata
        INTO v_blob
        FROM lob_table
       WHERE filename = p_filename;
   EXCEPTION WHEN OTHERS THEN
      vErrMsg := 'No data found';
   END;
   -- Retrieve the SIZE of the BLOB
   blob_length := DBMS_LOB.GETLENGTH(v_blob);
   -- Open a handle to the location where you are going to write the blob
   -- Note: The 'WB' parameter means "Write in Byte Mode" and is only
   --          available in the UTL_FILE pkg with Oracle 10g or later.
   --        USE 'W' instead for pre Oracle 10q databases.
   out_file := UTL_FILE.FOPEN('OUT_FILE_LOC',p_filename, 'wb', chunk_size);
   -- Write the BLOB to the file in chunks
   WHILE blob_position <= blob_length LOOP
      IF ( ( blob_position + chunk_size - 1 ) > blob_length ) THEN
         chunk_size := blob_length - blob_position + 1;
      END IF;
      dbms_lob.read(v_blob, chunk_size, blob_position, v_buffer );
      UTL_FILE.put_raw ( out_file, v_buffer, TRUE);
      blob_position := blob_position + chunk_size;
   END LOOP;
END;Hope this helps.
Craig...
-- If my response or the response of another is helpful or answers your question please mark the response accordingly. Thanks!

How can I resolve error code -54 in iTunes? I am using the latest iTunes. No new updates are available.

How can I resolve error code -54 in iTunes? I am using the latest iTunes. No new updates are available. I'm using iTunes 11.3 on a MacBook Pro, OS X 10.6.8. I can't save my library in iTunes, the message just keeps popping up.

From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Although there is no formal list of OSX error code some of the old codes still apply to OSX .)
First, try simply restarting your computer.
Try quitting iTunes, then deleting the .xml (not .itl !) version of the library file in the iTunes folder (iTunes will generate a new one).
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814 - various things to try.
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.
iTunes: Missing folder or incorrect permissions may prevent authorization - http://support.apple.com/kb/ts1277
Troubleshooting permissions issues in Mac OS X - http://support.apple.com/kb/HT2963

How to save info in a meta-data of a jpg file?

hi, i need to know how to save info in a meta-data of a jpg file:
this is my code (doesn't work):
i get an exception,
javax.imageio.metadata.IIOInvalidTreeException: JPEGvariety and markerSequence nodes must be present
at com.sun.imageio.plugins.jpeg.JPEGMetadata.mergeNativeTree(JPEGMetadata.java:1088)
at com.sun.imageio.plugins.jpeg.JPEGMetadata.mergeTree(JPEGMetadata.java:1061)
at playaround.IIOMetaDataWriter.run(IIOMetaDataWriter.java:59)
at playaround.Main.main(Main.java:14)
package playaround;
import java.io.*;
import java.util.Iterator;
import java.util.Locale;
import javax.imageio.*;
import javax.imageio.metadata.IIOMetadata;
import javax.imageio.metadata.IIOMetadataNode;
import javax.imageio.plugins.jpeg.JPEGImageWriteParam;
import javax.imageio.stream.*;
import org.w3c.dom.*;
public class IIOMetaDataWriter {
public static void run(String[] args) throws IOException{
try {
File f = new File("C:/images.jpg");
ImageInputStream ios = ImageIO.createImageInputStream(f);
Iterator readers = ImageIO.getImageReaders(ios);
ImageReader reader = (ImageReader) readers.next();
reader.setInput(ImageIO.createImageInputStream(f));
ImageWriter writer = ImageIO.getImageWriter(reader);
writer.setOutput(ImageIO.createImageOutputStream(f));
JPEGImageWriteParam param = new JPEGImageWriteParam(Locale.getDefault());
IIOMetadata metaData = writer.getDefaultStreamMetadata(param);
String MetadataFormatName = metaData.getNativeMetadataFormatName();
IIOMetadataNode root = (IIOMetadataNode)metaData.getAsTree(MetadataFormatName);
IIOMetadataNode markerSequence = getChildNode(root, "markerSequence");
if (markerSequence == null) {
markerSequence = new IIOMetadataNode("JPEGvariety");
root.appendChild(markerSequence);
IIOMetadataNode jv = getChildNode(root, "JPEGvariety");
if (jv == null) {
jv = new IIOMetadataNode("JPEGvariety");
root.appendChild(jv);
IIOMetadataNode child = getChildNode(jv, "myNode");
if (child == null) {
child = new IIOMetadataNode("myNode");
jv.appendChild(child);
child.setAttribute("myAttName", "myAttValue");
metaData.mergeTree(MetadataFormatName, root);
catch (Throwable t){
t.printStackTrace();
protected static IIOMetadataNode getChildNode(Node n, String name) {
NodeList nodes = n.getChildNodes();
for (int i = 0; i < nodes.getLength(); i++) {
Node child = nodes.item(i);
if (name.equals(child.getNodeName())) {
return (IIOMetadataNode)child;
return null;
static void displayMetadata(Node node, int level) {
indent(level); // emit open tag
System.out.print("<" + node.getNodeName());
NamedNodeMap map = node.getAttributes();
if (map != null) { // print attribute values
int length = map.getLength();
for (int i = 0; i < length; i++) {
Node attr = map.item(i);
System.out.print(" " + attr.getNodeName() +
"=\"" + attr.getNodeValue() + "\"");
Node child = node.getFirstChild();
if (child != null) {
System.out.println(">"); // close current tag
while (child != null) { // emit child tags recursively
displayMetadata(child, level + 1);
child = child.getNextSibling();
indent(level); // emit close tag
System.out.println("</" + node.getNodeName() + ">");
} else {
System.out.println("/>");
static void indent(int level) {
for (int i = 0; i < level; i++) {
System.out.print(" ");
}

Hi,
Yes, you need store data to table, and fetch it when page is opened.
Simple way is create table with few columns and e.g. with CLOB column and then create form based on that table.
Then modify item types as you like, e.g. use HTML editor for CLOB column
Regards,
Jari

How to save CSV file in application server while making infospoke

How to save CSV file in application server to be used as destination while making infospoke.
Please give the steps.........

Hi
If you want to load your flatfile from Application server,then you need to trasfer your file from your desktop(Computer) to Application server by using FTP.
Try using ARCHIVFILE_CLIENT_TO_SERVER Function module.
You Just need to give thesource path and the target path
goto SE37 t-code , which is Function module screen, give the function name ARCHIVFILE_CLIENT_TO_SERVER, on click F8 Execute button.
for path variable give the file path where it resides like C:\users\xxx\desktop\test.csv
for target path give the directory path on Application server: /data/bi_data
remember the directory in Server starts with /.
U have to where to place the file.
Otherwise use 3rd party tools to connect to ur appl server like : Core FTP and Absolute FTP in google.
Otherwise...
Goto the T.code AL11. From there, you can find the directories available in the Application Server.
For example, if you wanna save the file in the directory "DIR_HOME", then you can find the path of the directories in the nearby column. With the help of this, you can specify the target path. Specify the target path with directory name followed by the filename with .CSV extension.
Hope this helps
regards
gaurav

How to save HR data in Active Directory using ABAP i.e thru LDAP Connector

Hi All,
       Can any one please help me out how
       to save HR data in Active directory
       using LDAP Connector ?
       Please help ASAP as it is very urgent .
Thanks
Jitendra

There are 100 of such scripts are there online.
here are few tips and codes. you will get more.
https://gallery.technet.microsoft.com/scriptcenter/Feeding-data-to-Active-0227d15c
http://blogs.technet.com/b/heyscriptingguy/archive/2012/10/31/use-powershell-to-modify-existing-user-accounts-in-active-directory.aspx
http://powershell.org/wp/forums/topic/ad-import-csv-update-attributes-script/
Please mark this as answer if it helps

How to save a Module in Visual Basic with Excel for Mac 2011

On the MS support pages it shows how to create a module that will turn digits into written words:
http://support.microsoft.com/kb/213360/en-us
so if you enter $32.50 it will convert it to Thirty-Two Dollars and 50 cents. Perfect for batch payroll work!
Using Excel for Mac I open the Visual Basic editor (which I clearly know nothing about!), paste in the text provided by Microsoft and it works perfectly.
BUT... if I close that workbook that module is gone. I can't use it again in the next workbook. Surely there's a simple way to save the module so it is available in all future workbooks... yes? This one has stumped several MS techs so far.

Hi,
I have no Excel for Mac, so I can't test this issue .
Did you save the Excel workbook as Excel Macro-Enabled workbook(*.xlsm)?I guess Excel would prompt you if you want to save the VBA code when you close the workbook.
Wind Zhang
TechNet Community Support

How to save status bar background color in local settings(Windows Phone 8.1)

I have given the user the freedom to change background colour and save it in local settings. But I am confused on how to save the status bar colour settings because I want to give the user the freedom to choose from 4-5 colours where background of status bar
can be changed.
public static void SaveStatusBarColor()
// get status bar color
var statusBar = StatusBar.GetForCurrentView();
var color = statusBar.BackgroundColor;
// convert color to hex string
var hexCode = color.HasValue ? color.Value.ToString() : "";
// store color in local settings
ApplicationData.Current.LocalSettings.Values["StatusBarColor"] = hexCode;
public static void LoadStatusBarColor()
// get color hex string from local settings
var hexCode = ApplicationData.Current.LocalSettings.Values["StatusBarColor"] as string;
if (string.IsNullOrEmpty(hexCode))
return;
// convert hexcode to color
var color = new Color();
color.A = byte.Parse(hexCode.Substring(1, 2), NumberStyles.AllowHexSpecifier);
color.R = byte.Parse(hexCode.Substring(3, 2), NumberStyles.AllowHexSpecifier);
color.G = byte.Parse(hexCode.Substring(5, 2), NumberStyles.AllowHexSpecifier);
color.B = byte.Parse(hexCode.Substring(7, 2), NumberStyles.AllowHexSpecifier);
// set the status bar color
var statusBar = StatusBar.GetForCurrentView(); // Exception Line
statusBar.BackgroundColor = color;
}This is what was suggested to me. Initially the app runs and saves the settings.But when the app is closed and restarted again it crashes.

Hi shriyansh,
Where did you call the method SaveStatusBarColor() and LoadStatusBarColor()?
I have called your SaveStatusBarColor() in the OnNavigatedFrom method and called the LoadStatusBarColor() in the OnNavigatedTo method, it worked very well in my side.
So I can not reproduce your issue.
Here are my code and result, please try to check it:
public class test
public Color colors { get; set; }
public sealed partial class MainPage : Page
List<test> testdemo = new List<test>();
public MainPage()
this.InitializeComponent();
testdemo.Add(new test() { colors = Colors.Red });
testdemo.Add(new test() { colors = Colors.Green});
testdemo.Add(new test() { colors = Colors.Gray});
testdemo.Add(new test() { colors = Colors.Blue });
this.NavigationCacheMode = NavigationCacheMode.Required;
public static void SaveStatusBarColor()
// get status bar color
var statusBar = StatusBar.GetForCurrentView();
var color = statusBar.BackgroundColor;
// convert color to hex string
var hexCode = color.HasValue ? color.Value.ToString() : "";
// store color in local settings
ApplicationData.Current.LocalSettings.Values["StatusBarColor"] = hexCode;
public static void LoadStatusBarColor()
//get color hex string from local settings
var hexCode = ApplicationData.Current.LocalSettings.Values["StatusBarColor"] as string;
if (string.IsNullOrEmpty(hexCode))
return;
// convert hexcode to color
var color = new Color();
color.A = byte.Parse(hexCode.Substring(1, 2), NumberStyles.AllowHexSpecifier);
color.R = byte.Parse(hexCode.Substring(3, 2), NumberStyles.AllowHexSpecifier);
color.G = byte.Parse(hexCode.Substring(5, 2), NumberStyles.AllowHexSpecifier);
color.B = byte.Parse(hexCode.Substring(7, 2), NumberStyles.AllowHexSpecifier);
var statusBar = StatusBar.GetForCurrentView();
statusBar.BackgroundColor = color;
statusBar.BackgroundOpacity = 1;
protected override void OnNavigatedTo(NavigationEventArgs e)
LoadStatusBarColor();
protected override void OnNavigatedFrom(NavigationEventArgs e)
SaveStatusBarColor();
private void ChangeColorButton_Click(object sender, RoutedEventArgs e)
var statusBar = StatusBar.GetForCurrentView();
statusBar.BackgroundColor = testdemo[Convert.ToInt32(Mytextbox.Text)].colors;
statusBar.BackgroundOpacity = 1;
The result:
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to save recordset by code

Similar Messages

Maybe you are looking for