How to scan with the HP Photosmart C4280

Hello from Austria,
have just installed the HP Photosmart C4280 by specifying "new printer" and selceting the printer type corectly.
I cannot print a test page and when pushing the scanning button on the printer the message comes up "USB not connected"; however I have connected the USB cable between Laptop and Printer.
Also, I cannot select scanner features when double-clicking the printer; I see only printer features,
how can I activate the scanning ?
Many thanks to the one who can help me, Werner

Hello pohlwerner49,
Welcome to the HP Forums.
I see that you are having some connectivity issues.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

How to scan with an office jet 6500a and a Mac OS 10.9.4?

how to scan with an office jet 6500a and a Mac OS 10.9.4?
This question was solved.
View Solution.

Hi midandco,
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend readding the printer with theOS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Please let me know.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How to scan with hp 8500pro

how to scan with a hp 85000pro

Hi SanMiguel,
Welcome to the HP Forum!
To do the job (scan) effectively, you should install the Full Feature Software for your printer onto your computer. The FFS contains the HP Solution Center which, in turn, controls the Scan function and all its features. Scan "how-to" help is outlined in the printer's manual starting around page 51.
If you do not (or cannot) install the FFS, you can try using "Webscan" as outlined in the Printer's manual, starting on page 53:
OFFICEJET PRO 8500 User Guide
The download size for the Software can be large, so plan accordingly. That is, if your internet speed is slow, plan on downloading the installation file when you are not doing a lot of other activities.
Here are the instructions to look for and install the software for your printer.
In many cases, you can (re)install the Full Feature Software for your printer to enhance its capabilities. The HP Solution Center is an integrated part of the FFS.
(Re)install the basic driver or Full Feature Software:
Drivers control hardware connected to the computer (wired or wireless).
Software controls the programs that interact with the User.
Go to the top of the forum page to Support and Drivers
Enter your Printer Model information, and then go to Software and Drivers...
Enter your Operating System in the Drop-down menu... Scroll down
Look for category Driver - Product Installation Software
Select the appropriate Basic Driver or Full Feature Software – if available for your printer Save the *.exe installation package on your computer -
NOTE the name and the location of the file when you save it. The *.exe file will likely save to the "Downloads“ folder.
Install the Software / Driver installation package. If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select ‘run as Administrator’ and install.
NOTE: There is sometimes a lot of information at the printer’s website manuals, how-to pages, and alerts for your printer. Be sure to take an extended look at what’s available.
====================================================================================
I hope this helps!
Say “Thanks!” for the Help by clicking the Kudos Star on the Left
Did this solution fix your problem? Mark this Post “Accept as Solution” !
Note: You can find “Accept as Solution” only on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

How to scan with a HP Desk Jet 3632

How to scan with a HP Desk Jet 3632

Hi, How do you connect your printer now ? The following manuals may help: http://support.hp.com/us-en/product/HP-DeskJet-3630-All-in-One-Printer-series/7172306/model/7599657/manuals/ Regards.

How to scan with capture image and save 10.6.8

how to scan with capture image and save 10.6.8 ?

Instructions for using Image Capture for this available via the 2nd section.
http://support.apple.com/kb/HT2502

Is anyone having an issue with the hp photosmart premium c310a? I keep getting a "paper jam" error

I hope someone from hp is monitoring these posts. I am very disappointed with the new photosmart premium eAll-in-one. I just bought this printer in april and recently when printing, an error message "paper jam" will pop up after just printing 1 or 2 pages. I did all the recommended troubleshooting steps hp has online but after printing a couple pages error message comes back. And thats not even the worst part! I called hp tonight 4 TIMES to get this issue resolved because at this point I want a new printer sent to me! I have been hung up on 2 times and then told the other times that I need to talk to a case manager. Guess what? No case manager available to talk about my printer issue!! I spoke to 6 different representatives with NO help to be found. I cannot return to staples store where I bought it because its after the 14 day return policy hp has with staples. That is the MOST STUPIDEST policy I have ever heard of!! If I knew in advance that I could not return this printer to the store I got it from after 14 days have passed, I would have NEVER BOUGHT IT!! I am still waiting for a case manager to call me back so that I can get this thing picked up ad a new one sent to me.

Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this.

I can no longer print PDF files that were scanned with the very same MX479 on Windows XP, SP3

I can no longer print PDF files that were scanned with the very same MX479 All-in-One.
I have an (obsolete) Windows XP, SP3 computer. Obviously, no updates from Microsoft
have occurred that might have impacted my Canon Pixma MX479.
When I attempt to send 1 or more pages from a PDF file to the printer, I don't even get the
Canon PIXMA popup that would allow me to cancel the print job.
Yet the Print Queue icon appears in the lower right corner of my monitor.
If I view the Print Queue, the print queue shows "spooling" and does nothing more.
If I attempt to CANCEL the print job in the Print Queue, it simply changes to "deleting -
spooling".
I cannot cancel the print job that shows NOT RESPONDING via Task Manager, either.
In fact, the only way the Print Queue icon disappears is if I totally reboot my computer!
"Luckily", I can still print e-mails, Word documents, and even my downloaded PDF of my
bank statement.
So, I was thinking that it was *only* PIXMA'S OWN SCANNED PDFS that could not be
printed ON THE SAME PIXMA 479.
However, I have since realized that I also cannot print USPS Signature Proof of Delivery
PDFs that I received from USPS via e-mail.
So why can I print *some* PDF files, but not *all* PDF files, like I previously could do?
THESE SCANS ARE OF LEGAL DOCUMENTS, SO I WILL LIKELY HAVE TO E-MAIL
THE REQUISITE, PREVIOUSLY SCANNED PDFS TO FEDEX TO PAY FOR *THEM*
TO PRINT THEM.
NOTE: I *have* tried turning the PIXMA off, unplugging it, rebooting the computer, plugging
the PIXM in and restarting the PIXMA - still no ability to print PIXMA-scanned PDFs.
And, I find it very strange that e-mails, Word documents, and some other PDFs print with
no problem "around" "NOT RESPONDING" PIXMA print jobs.
I have owned Canon printers for years, including the MX420, and the MX340.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

How to deal with the rejected stock if it is rjected by QC

Dear All,
please let me know how to deal with the rejected stock from Quality point of view.i.e., for incoming materails and Finished if returned from customer
Regards,
P.Vijaya

hi
if material is rejected for incoming material then you can create Notification for incoming material due to you can return back material with print for that you have to record defects in result recording. in T-code QM02 if result is recorded with defects. or you can create with Qm01.against vendor
if material is returned from costumer you can create inspection lot for that for that you have to maintained inspection type 06 in material master. you can result record for that you can create notification for that. or rework for this material as per quality check or can scrap
if have any problem please come back
regards
Pravin

How to deal with the change in address of plant,

how to deal with the change in address of plant,companycode,sales org etc.?

Hi,
Do you want to change the address of Company code, Plant and Sales org?
Follow the menu path in SPRO.
SPRO >> Enterprise structure >> Definition >> Financial accounting >> Define Company code >> Edit company code >> Click on address and change.
.. Definition >> Sales and Distribution >> Define ...sales org >> select the sales org and click on address and change.
... Definition >> Logistics - general >> Plant >>>> Click on address and change.
Regards,
K Bharathi

How you deal with the situation if the vendor/supplier is also a customer ?

Dear All,
Could you please help me with the idea on how to deal with the suppliers/vendors who also are customers to you in MM?
Thanks in advance,
Ranjan

It depends what you are intentions are..
However
1. Create a customer master record for that vendor that is also a customer.
2. Enter Vendor number in Vendor field in control data-customer master record.
3. Enter customer number in Customer field in Control data- vendor master record
Finally, Check "Clrg with vend." field or "Clrg with cust." field

How forward SMS with the Iphone 3G ? Txs

How forward SMS with the Iphone 3G ? Txs

vous ne pouvez pas transmettre des messages texte
you can not forward text messages

How to stream with the player strobe media playback videos using http dynamic streaming?

Hi..
please could i have some help about the player strobe media playback?
i would like to know how to stream with the player strobe media playback videos using http dynamic streaming.
I have already installed the server,i put my own video in the video on demand folder.i downloaded the player but i don't know how to stream that video with the adobe protocol dynamic streaming.

http://osmf.org/configurator/fmp/
Use this configurator, and use the same code it generates with your strobemediaplayback.swf
Also make sure the domain where strobemediaplayback.swf is being called from and resides, is in your /webroot/crossdomain.xml file, or it will not work.

How to deal with the situation when the database change into ms-sqlserver ?

Hi,dear all,
How to deal with the situation when the database change into ms-sqlserver or other database?
Now, i want to build a j2ee project with ORACLE ADF bc,but this project may be used in several diffrent databases for example oracle db,ms db,mysql and so on.however,if i have developer this project in jdeveloper and this project connection was config as a oracle database,and then,can this project be reused for other databases espasially including the model codes? if yes,how should i do?
all who know how to resolve this,tell me pls,thanks.
bruce Li,
China
Message was edited by:
user526724

Hi Paulbin,
Do you want to supply a function-pointer to a DLL so it can call[back] your VI? Here's how it can be done with .NET, though, that solution requires a C compiler. A single "VI_to_function-reference" utility could handle all cases where the callback passes no parameters. Maybe someday somebody will share that dll.
Did you know that LabVIEW can use Events for some COM-signals change? See pic. (Note: DTR is not listed - - )
Another question is another function's prototype is WORD SetTestType(WORD comHandle, bool type1, bool type2, bool type3), I tried to use a boolean control and a Boolean to (0,1) node in labVIEW to pass parameters to CLF, I config the bool input value as U8(according to C++ bool type) and U32(according to WIN32 BOOL type), it dose not help, when I execute the VI, LabVIEW will be disappeare, it seems to be closed, I must start it again.
Could someone has similar experience on this points?
It's easy to crash LabVIEW misusing CLF - maybe there's another reason for the crash besides bool mis-match(?) Do you know which "Calling convention" is required? What type is comHandle? (where does comHandle come from?)
Cheers!
Message Edited by tbd on 03-23-2007 09:34 PM
Message Edited by tbd on 03-23-2007 09:35 PM
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
evt.jpg ‏7 KB

How to finish with the sites that open aleatory on safari

how to finish with the sites that open aleatory on safari?

There is no need to download anything to solve this problem. You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Scheduling Gantt: How to work with the "zoom-to-fit" drop-down

I'm trying to figure out how to work with the "zoom-to-fit" drop-down on the scheduling Gantt dvt control. It has choices in the drop-down that are not appropriate for my project. The documented purpose of this drop-down is to allow the user to zoom to a level that would allow a certain time range to "fit" within the current window. The choices start at "1 Week" and go up through "2 Weeks", "1 Month" etc. The problem is that the projects I'm displaying are generally just a couple of days long, and consist of many small tasks. So even 1 Week is too big. Also, no matter what I pick in this drop down, nothing happens.
So my questions are these:
1. Can I change the choices in this drop-down? If so, how do I do that?
2. If not, then how can I remove this drop-down? (I figure I probably can if I disable "zoom", but I don't want to do that.)
3. How do I get this to actually do something? I assume maybe I have to code some listener somewhere, but if so, how do I do that.
Thanks for any hints, tips and advice!

Currently, we do not allow customization of zoom-to-fit. Please file an ER. We could add a param to featuresOff attribute to disable/remove zoom-to-fit from the toolbar without disabling/removing zoom.

How to scan with the HP Photosmart C4280

Similar Messages

Maybe you are looking for